evie/android_kernel_oneplus_msm8998 - Gay Catgirls Forgejo: gay catgirls having sex

evie/android_kernel_oneplus_msm8998

21 lines

609 B

Makefile

Raw Normal View History

[POWERPC] Optimise some TOC usage Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-06-10 20:23:54 +10:00			`ifeq ($(CONFIG_PPC64),y)`
			`EXTRA_CFLAGS += -mno-minimal-toc`
			`endif`

[POWERPC] Allow pSeries to build without CONFIG_PCI Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-03-04 17:04:44 +11:00			`obj-y := lpar.o hvCall.o nvram.o reconfig.o \`
			`setup.o iommu.o ras.o rtasd.o \`
[POWERPC] pseries: Enabling auto poweron after power is restored. During power outages, the UPS notifies the system for a shutdown. In the current setup, it isn't possible to poweron when power is restored. This patch fixes the issue by calling the right ibm,power-off-ups token during such events. It also adds a sysfs interface so userspace can specify whether or not to power on when power is restored. Signed-off-by: Manish Ahuja <ahuja@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-02-08 16:01:17 -06:00			`firmware.o power.o`
powerpc: move pSeries files to arch/powerpc/platforms/pseries Signed-off-by: Paul Mackerras <paulus@samba.org> 2005-10-10 22:03:41 +10:00			`obj-$(CONFIG_SMP) += smp.o`
[PATCH] powerpc: Move xics.[ch] into platforms/pseries This patch moves the XICS interrupt controller code into the platforms/pseries directory, since it only appears on pSeries machines. If it ever appears on some other machine we can move it to sysdev, although xics.c itself will need a bunch of changes in that case to remove pSeries specific assumptions. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2005-10-28 15:35:50 +10:00			`obj-$(CONFIG_XICS) += xics.o`
[PATCH] powerpc: Move scanlog.c to platforms/pseries scanlog.c is only compiled on pSeries. Thus, this patch moves it to platforms/pseries. Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64). Built for iSeries (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 2005-11-10 12:42:17 +11:00			`obj-$(CONFIG_SCANLOG) += scanlog.o`
[POWERPC] Add EEH sysfs blinkenlights Add sysfs blinkenlights for EEH statistics. Shuffle the eeh_add_device_tree() call so that it appears in the correct sequence. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/Makefile \| 2 arch/powerpc/platforms/pseries/eeh.c \| 4 + arch/powerpc/platforms/pseries/eeh_cache.c \| 2 arch/powerpc/platforms/pseries/eeh_sysfs.c \| 84 +++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c \| 7 +- include/asm-powerpc/ppc-pci.h \| 3 + 6 files changed, 98 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-05-24 03:16:46 +10:00			`obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o`
[POWERPC] Cleanup pseries kexec code Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-02-08 18:33:55 +11:00			`obj-$(CONFIG_KEXEC) += kexec.o`
[POWERPC] Allow pSeries to build without CONFIG_PCI Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-03-04 17:04:44 +11:00			`obj-$(CONFIG_PCI) += pci.o pci_dlpar.o`
[POWERPC] RTAS MSI implementation Implement MSI support via RTAS (RTAS = run-time firmware on pSeries machines). For now we assumes that if the required RTAS tokens for MSI are present, then we want to use the RTAS MSI routines. When RTAS is managing MSIs for us, it will/may enable MSI on devices that support it by default. This is contrary to the Linux model where a device is in LSI mode until the driver requests MSIs. To remedy this we add a pci_irq_fixup call, which disables MSI if they've been assigned by firmware and the device also supports LSI. Devices that don't support LSI at all will be left as is, drivers are still expected to call pci_enable_msi() before using the device. At the moment there is no pci_irq_fixup on pSeries, so we can just set it unconditionally. If other platforms use the RTAS MSI backend they'll need to check that still holds. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> 2007-05-08 12:58:35 +10:00			`obj-$(CONFIG_PCI_MSI) += msi.o`
powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras <paulus@samba.org> 2005-11-14 17:30:17 +11:00
[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.c As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-12-05 17:52:36 +11:00			`obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o`

powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras <paulus@samba.org> 2005-11-14 17:30:17 +11:00			`obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o`
			`obj-$(CONFIG_HVCS) += hvcserver.o`
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 2006-09-06 16:23:12 -07:00			`obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o`