android_kernel_oneplus_msm8998/drivers/video/omap2/dss/display-sysfs.c

345 lines
8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* Some code and ideas taken from drivers/video/omap/ driver
* by Imre Deak.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "DISPLAY"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sysfs.h>
#include <video/omapdss.h>
#include "dss.h"
static struct omap_dss_device *to_dss_device_sysfs(struct device *dev)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (&dssdev->dev == dev) {
omap_dss_put_device(dssdev);
return dssdev;
}
}
return NULL;
}
static ssize_t display_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
return snprintf(buf, PAGE_SIZE, "%s\n",
dssdev->name ?
dssdev->name : "");
}
static ssize_t display_enabled_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 16:23:32 +03:00
return snprintf(buf, PAGE_SIZE, "%d\n",
omapdss_device_is_enabled(dssdev));
}
static ssize_t display_enabled_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int r;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 16:23:32 +03:00
bool enable;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 16:23:32 +03:00
r = strtobool(buf, &enable);
if (r)
return r;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 16:23:32 +03:00
if (enable == omapdss_device_is_enabled(dssdev))
return size;
if (omapdss_device_is_connected(dssdev) == false)
return -ENODEV;
if (enable) {
r = dssdev->driver->enable(dssdev);
if (r)
return r;
} else {
dssdev->driver->disable(dssdev);
}
return size;
}
static ssize_t display_tear_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
return snprintf(buf, PAGE_SIZE, "%d\n",
dssdev->driver->get_te ?
dssdev->driver->get_te(dssdev) : 0);
}
static ssize_t display_tear_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int r;
bool te;
if (!dssdev->driver->enable_te || !dssdev->driver->get_te)
return -ENOENT;
r = strtobool(buf, &te);
if (r)
return r;
r = dssdev->driver->enable_te(dssdev, te);
if (r)
return r;
return size;
}
static ssize_t display_timings_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
struct omap_video_timings t;
if (!dssdev->driver->get_timings)
return -ENOENT;
dssdev->driver->get_timings(dssdev, &t);
return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
t.pixel_clock,
t.x_res, t.hfp, t.hbp, t.hsw,
t.y_res, t.vfp, t.vbp, t.vsw);
}
static ssize_t display_timings_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
struct omap_video_timings t = dssdev->panel.timings;
int r, found;
if (!dssdev->driver->set_timings || !dssdev->driver->check_timings)
return -ENOENT;
found = 0;
#ifdef CONFIG_OMAP2_DSS_VENC
if (strncmp("pal", buf, 3) == 0) {
t = omap_dss_pal_timings;
found = 1;
} else if (strncmp("ntsc", buf, 4) == 0) {
t = omap_dss_ntsc_timings;
found = 1;
}
#endif
if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
&t.pixel_clock,
&t.x_res, &t.hfp, &t.hbp, &t.hsw,
&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
return -EINVAL;
r = dssdev->driver->check_timings(dssdev, &t);
if (r)
return r;
dssdev->driver->disable(dssdev);
dssdev->driver->set_timings(dssdev, &t);
r = dssdev->driver->enable(dssdev);
if (r)
return r;
return size;
}
static ssize_t display_rotate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int rotate;
if (!dssdev->driver->get_rotate)
return -ENOENT;
rotate = dssdev->driver->get_rotate(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
}
static ssize_t display_rotate_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int rot, r;
if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
return -ENOENT;
r = kstrtoint(buf, 0, &rot);
if (r)
return r;
r = dssdev->driver->set_rotate(dssdev, rot);
if (r)
return r;
return size;
}
static ssize_t display_mirror_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int mirror;
if (!dssdev->driver->get_mirror)
return -ENOENT;
mirror = dssdev->driver->get_mirror(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
}
static ssize_t display_mirror_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
int r;
bool mirror;
if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
return -ENOENT;
r = strtobool(buf, &mirror);
if (r)
return r;
r = dssdev->driver->set_mirror(dssdev, mirror);
if (r)
return r;
return size;
}
static ssize_t display_wss_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
unsigned int wss;
if (!dssdev->driver->get_wss)
return -ENOENT;
wss = dssdev->driver->get_wss(dssdev);
return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
}
static ssize_t display_wss_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct omap_dss_device *dssdev = to_dss_device_sysfs(dev);
u32 wss;
int r;
if (!dssdev->driver->get_wss || !dssdev->driver->set_wss)
return -ENOENT;
r = kstrtou32(buf, 0, &wss);
if (r)
return r;
if (wss > 0xfffff)
return -EINVAL;
r = dssdev->driver->set_wss(dssdev, wss);
if (r)
return r;
return size;
}
static DEVICE_ATTR(name, S_IRUGO, display_name_show, NULL);
static DEVICE_ATTR(enabled, S_IRUGO|S_IWUSR,
display_enabled_show, display_enabled_store);
static DEVICE_ATTR(tear_elim, S_IRUGO|S_IWUSR,
display_tear_show, display_tear_store);
static DEVICE_ATTR(timings, S_IRUGO|S_IWUSR,
display_timings_show, display_timings_store);
static DEVICE_ATTR(rotate, S_IRUGO|S_IWUSR,
display_rotate_show, display_rotate_store);
static DEVICE_ATTR(mirror, S_IRUGO|S_IWUSR,
display_mirror_show, display_mirror_store);
static DEVICE_ATTR(wss, S_IRUGO|S_IWUSR,
display_wss_show, display_wss_store);
static const struct attribute *display_sysfs_attrs[] = {
&dev_attr_name.attr,
&dev_attr_enabled.attr,
&dev_attr_tear_elim.attr,
&dev_attr_timings.attr,
&dev_attr_rotate.attr,
&dev_attr_mirror.attr,
&dev_attr_wss.attr,
NULL
};
int display_init_sysfs(struct platform_device *pdev)
{
struct omap_dss_device *dssdev = NULL;
int r;
for_each_dss_dev(dssdev) {
struct kobject *kobj = &dssdev->dev.kobj;
r = sysfs_create_files(kobj, display_sysfs_attrs);
if (r) {
DSSERR("failed to create sysfs files\n");
goto err;
}
r = sysfs_create_link(&pdev->dev.kobj, kobj, dssdev->alias);
if (r) {
sysfs_remove_files(kobj, display_sysfs_attrs);
DSSERR("failed to create sysfs display link\n");
goto err;
}
}
return 0;
err:
display_uninit_sysfs(pdev);
return r;
}
void display_uninit_sysfs(struct platform_device *pdev)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
sysfs_remove_link(&pdev->dev.kobj, dssdev->alias);
sysfs_remove_files(&dssdev->dev.kobj, display_sysfs_attrs);
}
}