evie/android_kernel_oneplus_msm8998
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_oneplus_msm8998/drivers/net/wireless/mwifiex/Kconfig

43 lines
1.2 KiB
Text
Raw Normal View History

wireless: mwifiex: initial commit for Marvell mwifiex driver This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21 18:00:50 -07:00
config MWIFIEX
tristate "Marvell WiFi-Ex Driver"
depends on CFG80211
---help---
This adds support for wireless adapters based on Marvell
mwifiex: add support for Marvell SD8897 chipset Some of the key differences between SD8897 and older chipsets are as follows: a) sdio mpa_rx and mpa_tx ports have been increased from 16 to 32 b) Same is the case with read/write bitmap that one receives from mpa_reg read c) aggregation packet count doubled from 8 to 16 d) Most of key reg addresses are changed e) There is a separate command or control port f) Now command rx/tx_done have new interrupts 1. 'supports_sdio_new_mode' flag is added to handle (a) and (b). 2. (c) and (d) are taken care of by filling chip specific information in global structurei (mwifiex_sdio_sd8897). 3. For older chipsets, port 0 was cmd port and port 1->15 were data port. Therefore we had CTRL_PORT_MASK to differentiate port type. Now these changes are under 'has_control_mask' flag. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17 17:54:58 -07:00
802.11n/ac chipsets.
wireless: mwifiex: initial commit for Marvell mwifiex driver This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21 18:00:50 -07:00
If you choose to build it as a module, it will be called
mwifiex.
config MWIFIEX_SDIO
mwifiex: add support for SD8887 chipset This patch adds SD8887 support to mwifiex. SD8887 is Marvell's 1x1 11ac solution. The corresponding firmware image file is located at: "mrvl/sd8887_uapsta.bin" Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-01 10:55:26 -07:00
tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897"
wireless: mwifiex: initial commit for Marvell mwifiex driver This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21 18:00:50 -07:00
depends on MWIFIEX && MMC
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
mwifiex: add support for SD8887 chipset This patch adds SD8887 support to mwifiex. SD8887 is Marvell's 1x1 11ac solution. The corresponding firmware image file is located at: "mrvl/sd8887_uapsta.bin" Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-01 10:55:26 -07:00
8786/8787/8797/8887/8897 chipsets with SDIO interface.
wireless: mwifiex: initial commit for Marvell mwifiex driver This driver adds WiFi support for Marvell 802.11n based chipsets with SDIO interface. Currently only SD8787 is supported. More chipsets will be supported later. drivers/net/wireless/mwifiex/ Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21 18:00:50 -07:00
If you choose to build it as a module, it will be called
mwifiex_sdio.
mwifiex: add support for Marvell pcie8766 chipset This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11 17:41:21 -07:00
config MWIFIEX_PCIE
mwifiex: add PCIe8897 support This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08 18:18:09 -08:00
tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897"
mwifiex: add support for Marvell pcie8766 chipset This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11 17:41:21 -07:00
depends on MWIFIEX && PCI
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
mwifiex: add PCIe8897 support This patch adds PCIe8897 support to mwifiex. In PCIe8897 PFU (pre-fetch unit) is enabled by default. This patch adds support to accommodate this feaure as well. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-08 18:18:09 -08:00
8766/8897 chipsets with PCIe interface.
mwifiex: add support for Marvell pcie8766 chipset This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11 17:41:21 -07:00
If you choose to build it as a module, it will be called
mwifiex_pcie.
mwifiex: add support for Marvell USB8797 chipset This patch supports Avastar 88W8797 chipset with USB interface. The corresponding firmware image file is located at: "mrvl/usb8797_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-18 20:08:28 -07:00
config MWIFIEX_USB
mwifiex: Add USB8766 support Adds new VID/PID for the Marvell 88W8766. The kernel currently only supports the device as PCI, but it is also available using USB. An example of a device delivered with the 88W8766 as USB is the Globalscale Mirabox. TX buffer size is set to driver default (2K), as we do not know the firmware requirement. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-20 16:52:58 +01:00
tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897"
mwifiex: add support for Marvell USB8797 chipset This patch supports Avastar 88W8797 chipset with USB interface. The corresponding firmware image file is located at: "mrvl/usb8797_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-18 20:08:28 -07:00
depends on MWIFIEX && USB
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
mwifiex: add USB8897 support Adding new device IDs and assigning generic function/variable names instead of using device-id specific names. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-09 19:36:55 -08:00
8797/8897 chipset with USB interface.
mwifiex: add support for Marvell USB8797 chipset This patch supports Avastar 88W8797 chipset with USB interface. The corresponding firmware image file is located at: "mrvl/usb8797_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-18 20:08:28 -07:00
If you choose to build it as a module, it will be called
mwifiex_usb.
Reference in a new issue Copy permalink