diff --git a/arch/arm/boot/dts/qcom/msm-pmicobalt.dtsi b/arch/arm/boot/dts/qcom/msm-pmicobalt.dtsi
index 0a20d073aad6..627254caf696 100644
--- a/arch/arm/boot/dts/qcom/msm-pmicobalt.dtsi
+++ b/arch/arm/boot/dts/qcom/msm-pmicobalt.dtsi
@@ -491,5 +491,63 @@
 			qcom,lra-auto-res-mode = "qwd";
 			qcom,lra-res-cal-period = <4>;
 		};
+
+		flash_led: qcom,leds@d300 {
+			compatible = "qcom,qpnp-flash-led-v2";
+			status = "okay";
+			reg = <0xd300 0x100>;
+			label = "flash";
+			qcom,hdrm-auto-mode;
+			qcom,isc-delay = <192>;
+
+			pmi8998_flash0: qcom,flash_0 {
+				label = "flash";
+				qcom,led-name = "led:flash_0";
+				qcom,max-current = <1500>;
+				qcom,default-led-trigger =
+							"flash0_trigger";
+				qcom,id = <0>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pmi8998_flash1: qcom,flash_1 {
+				label = "flash";
+				qcom,led-name = "led:flash_1";
+				qcom,max-current = <1500>;
+				qcom,default-led-trigger =
+							"flash1_trigger";
+				qcom,id = <1>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+			};
+
+			pmi8998_flash2: qcom,flash_2 {
+				label = "flash";
+				qcom,led-name = "led:flash_2";
+				qcom,max-current = <750>;
+				qcom,default-led-trigger =
+							"flash2_trigger";
+				qcom,id = <2>;
+				qcom,duration-ms = <1280>;
+				qcom,ires-ua = <12500>;
+				qcom,hdrm-voltage-mv = <325>;
+				qcom,hdrm-vol-hi-lo-win-mv = <100>;
+				pinctrl-names = "led_enable","led_disable";
+				pinctrl-0 = <&led_enable>;
+				pinctrl-1 = <&led_disable>;
+			};
+
+			pmi8998_switch: qcom,led_switch {
+				label = "switch";
+				qcom,led-name = "led:switch";
+				qcom,default-led-trigger =
+							"switch_trigger";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/msmcobalt-pinctrl.dtsi b/arch/arm/boot/dts/qcom/msmcobalt-pinctrl.dtsi
index e6a4f5085e42..2523ce88803f 100644
--- a/arch/arm/boot/dts/qcom/msmcobalt-pinctrl.dtsi
+++ b/arch/arm/boot/dts/qcom/msmcobalt-pinctrl.dtsi
@@ -1461,6 +1461,23 @@
 				bias-pull-up;           /* pull up */
 				drive-strength = <2>;   /* 2 MA */
 			};
+
+		};
+
+		led_enable: led_enable {
+			mux {
+				pins = "gpio21";
+				drive_strength = <16>;
+				output-high;
+			};
+		};
+
+		led_disable: led_disable {
+			mux {
+				pins = "gpio21";
+				drive_strength = <2>;
+				output-low;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/msmcobalt-rumi.dtsi b/arch/arm/boot/dts/qcom/msmcobalt-rumi.dtsi
index 8495da13ed1a..27e9bd321b1b 100644
--- a/arch/arm/boot/dts/qcom/msmcobalt-rumi.dtsi
+++ b/arch/arm/boot/dts/qcom/msmcobalt-rumi.dtsi
@@ -265,3 +265,11 @@
 &gdsc_ufs {
 	compatible = "regulator-fixed";
 };
+
+&spmi_bus {
+	qcom,pmicobalt@3 {
+		flash_led: qcom,leds@d300 {
+			status = "disabled";
+		};
+	};
+};