diff --git a/arch/arm/boot/dts/qcom/msm8998-mdss-panels.dtsi b/arch/arm/boot/dts/qcom/msm8998-mdss-panels.dtsi
index 1a743fe7e6d2..9bab7c037d40 100644
--- a/arch/arm/boot/dts/qcom/msm8998-mdss-panels.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-mdss-panels.dtsi
@@ -30,6 +30,7 @@
 #include "dsi-panel-sim-cmd.dtsi"
 #include "dsi-panel-sim-dualmipi-video.dtsi"
 #include "dsi-panel-sim-dualmipi-cmd.dtsi"
+#include "dsi-panel-s6e3ha3-amoled-dualmipi-wqhd-cmd.dtsi"
 
 &soc {
 	dsi_panel_pwr_supply: dsi_panel_pwr_supply {
@@ -189,3 +190,9 @@
 	qcom,mdss-dsi-t-clk-post = <0x06>;
 	qcom,mdss-dsi-t-clk-pre = <0x22>;
 };
+
+&dsi_dual_s6e3ha3_amoled_cmd {
+	qcom,mdss-dsi-panel-timings = [00 1c 06 06 0b 10 06 07 05 03 04 00];
+	qcom,mdss-dsi-t-clk-post = <0x07>;
+	qcom,mdss-dsi-t-clk-pre = <0x2a>;
+};
diff --git a/arch/arm/boot/dts/qcom/msm8998-qrd-vr1.dtsi b/arch/arm/boot/dts/qcom/msm8998-qrd-vr1.dtsi
index 37daa8d9af6f..25e381c2cb18 100644
--- a/arch/arm/boot/dts/qcom/msm8998-qrd-vr1.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-qrd-vr1.dtsi
@@ -343,3 +343,95 @@
 	qcom,ramp-step-ms = <255>;
 	qcom,use-blink;
 };
+
+&pmx_mdss {
+	mdss_dsi_active: mdss_dsi_active {
+		mux {
+			pins = "gpio52", "gpio94";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio52", "gpio94";
+			drive-strength = <8>; /* 8 mA */
+			bias-disable = <0>; /* no pull */
+		};
+	};
+
+	mdss_dsi_suspend: mdss_dsi_suspend {
+		mux {
+			pins = "gpio52", "gpio94";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio52", "gpio94";
+			drive-strength = <2>; /* 2 mA */
+			bias-pull-down; /* pull down */
+		};
+	};
+};
+
+&mdss_mdp {
+	qcom,mdss-pref-prim-intf = "dsi";
+};
+
+&mdss_dsi {
+	hw-config = "split_dsi";
+};
+
+&mdss_dsi0 {
+	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;
+	pinctrl-names = "mdss_default", "mdss_sleep";
+	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
+	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
+	qcom,platform-te-gpio = <&tlmm 10 0>;
+	qcom,platform-enable-gpio = <&tlmm 52 0>;
+	qcom,platform-reset-gpio = <&tlmm 94 0>;
+	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;
+	qcom,platform-bklight-en-gpio-invert;
+};
+
+&mdss_dsi1 {
+	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;
+	pinctrl-names = "mdss_default", "mdss_sleep";
+	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
+	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
+	qcom,platform-te-gpio = <&tlmm 10 0>;
+	qcom,platform-enable-gpio = <&tlmm 52 0>;
+	qcom,platform-reset-gpio = <&tlmm 94 0>;
+	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;
+	qcom,platform-bklight-en-gpio-invert;
+};
+
+&pmi8998_wled {
+	qcom,disp-type-amoled;
+};
+
+&labibb {
+	status = "ok";
+	qcom,qpnp-labibb-mode = "amoled";
+	qcom,swire-control;
+};
+
+&pmi8998_gpios {
+	/* GPIO 1 for WLED power enable */
+	gpio@c000 {
+		qcom,mode = <1>;
+		qcom,output-type = <0>;
+		qcom,pull = <5>;
+		qcom,vin-sel = <0>;
+		qcom,out-strength = <1>;
+		qcom,src-sel = <0>;
+		qcom,invert = <0>;
+		qcom,master-en = <1>;
+		status = "okay";
+	};
+};
+
+&dsi_dual_s6e3ha3_amoled_cmd {
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
+	qcom,mdss-dsi-bl-min-level = <1>;
+	qcom,mdss-dsi-bl-max-level = <255>;
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
+};