From 1e3a440cf2bdec90023ca2451e6f121ab9bd7b68 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 22 Aug 2018 22:49:36 -0500 Subject: [PATCH 01/48] ASoC: wm8804: Add ACPI support [ Upstream commit 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ] HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart Acked-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/soc/codecs/wm8804-i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8804-i2c.c b/sound/soc/codecs/wm8804-i2c.c index f27464c2c5ba..79541960f45d 100644 --- a/sound/soc/codecs/wm8804-i2c.c +++ b/sound/soc/codecs/wm8804-i2c.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "wm8804.h" @@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id); +#if defined(CONFIG_OF) static const struct of_device_id wm8804_of_match[] = { { .compatible = "wlf,wm8804", }, { } }; MODULE_DEVICE_TABLE(of, wm8804_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wm8804_acpi_match[] = { + { "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */ + { "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */ + { }, +}; +MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match); +#endif static struct i2c_driver wm8804_i2c_driver = { .driver = { .name = "wm8804", .pm = &wm8804_pm, - .of_match_table = wm8804_of_match, + .of_match_table = of_match_ptr(wm8804_of_match), + .acpi_match_table = ACPI_PTR(wm8804_acpi_match), }, .probe = wm8804_i2c_probe, .remove = wm8804_i2c_remove, From a5aa8bd85a4f99055f4c4e59a775e936d0442ced Mon Sep 17 00:00:00 2001 From: Danny Smith Date: Thu, 23 Aug 2018 10:26:20 +0200 Subject: [PATCH 02/48] ASoC: sigmadsp: safeload should not have lower byte limit [ Upstream commit 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ] Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit. Signed-off-by: Danny Smith Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/soc/codecs/sigmadsp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/sigmadsp.c b/sound/soc/codecs/sigmadsp.c index d53680ac78e4..6df158669420 100644 --- a/sound/soc/codecs/sigmadsp.c +++ b/sound/soc/codecs/sigmadsp.c @@ -117,8 +117,7 @@ static int sigmadsp_ctrl_write(struct sigmadsp *sigmadsp, struct sigmadsp_control *ctrl, void *data) { /* safeload loads up to 20 bytes in a atomic operation */ - if (ctrl->num_bytes > 4 && ctrl->num_bytes <= 20 && sigmadsp->ops && - sigmadsp->ops->safeload) + if (ctrl->num_bytes <= 20 && sigmadsp->ops && sigmadsp->ops->safeload) return sigmadsp->ops->safeload(sigmadsp, ctrl->addr, data, ctrl->num_bytes); else From ac38645226f310d2525e66cb0dbec265b0be3754 Mon Sep 17 00:00:00 2001 From: Lei Yang Date: Wed, 5 Sep 2018 11:14:49 +0800 Subject: [PATCH 03/48] selftests/efivarfs: add required kernel configs [ Upstream commit 53cf59d6c0ad3edc4f4449098706a8f8986258b6 ] add config file Signed-off-by: Lei Yang Signed-off-by: Shuah Khan (Samsung OSG) Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- tools/testing/selftests/efivarfs/config | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/efivarfs/config diff --git a/tools/testing/selftests/efivarfs/config b/tools/testing/selftests/efivarfs/config new file mode 100644 index 000000000000..4e151f1005b2 --- /dev/null +++ b/tools/testing/selftests/efivarfs/config @@ -0,0 +1 @@ +CONFIG_EFIVAR_FS=y From 8c2077219e252f752ceaa14fd724192d69dcced6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 25 Apr 2018 07:29:22 -0700 Subject: [PATCH 04/48] mfd: omap-usb-host: Fix dts probe of children [ Upstream commit 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ] It currently only works if the parent bus uses "simple-bus". We currently try to probe children with non-existing compatible values. And we're missing .probe. I noticed this while testing devices configured to probe using ti-sysc interconnect target module driver. For that we also may want to rebind the driver, so let's remove __init and __exit. Signed-off-by: Tony Lindgren Acked-by: Roger Quadros Signed-off-by: Lee Jones Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/mfd/omap-usb-host.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1d924d1533c0..b9dc2fcd8f26 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -548,8 +548,8 @@ static int usbhs_omap_get_dt_pdata(struct device *dev, } static const struct of_device_id usbhs_child_match_table[] = { - { .compatible = "ti,omap-ehci", }, - { .compatible = "ti,omap-ohci", }, + { .compatible = "ti,ehci-omap", }, + { .compatible = "ti,ohci-omap3", }, { } }; @@ -875,6 +875,7 @@ static struct platform_driver usbhs_omap_driver = { .pm = &usbhsomap_dev_pm_ops, .of_match_table = usbhs_omap_dt_ids, }, + .probe = usbhs_omap_probe, .remove = usbhs_omap_remove, }; @@ -884,9 +885,9 @@ MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); -static int __init omap_usbhs_drvinit(void) +static int omap_usbhs_drvinit(void) { - return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); + return platform_driver_register(&usbhs_omap_driver); } /* @@ -898,7 +899,7 @@ static int __init omap_usbhs_drvinit(void) */ fs_initcall_sync(omap_usbhs_drvinit); -static void __exit omap_usbhs_drvexit(void) +static void omap_usbhs_drvexit(void) { platform_driver_unregister(&usbhs_omap_driver); } From ba996b37908ccafefa452f85747975829fcb25eb Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 11 Sep 2018 15:14:04 -0600 Subject: [PATCH 05/48] sound: enable interrupt after dma buffer initialization [ Upstream commit b61749a89f826eb61fc59794d9e4697bd246eb61 ] In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai Signed-off-by: Yu Zhao Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/hda/hdac_controller.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index b5a17cb510a0..4727f5b80e76 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus) */ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) { + WARN_ON_ONCE(!bus->rb.area); + spin_lock_irq(&bus->reg_lock); /* CORB set up */ bus->corb.addr = bus->rb.addr; @@ -377,13 +379,15 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) /* reset controller */ azx_reset(bus, full_reset); - /* initialize interrupts */ + /* clear interrupts */ azx_int_clear(bus); - azx_int_enable(bus); /* initialize the codec command I/O */ snd_hdac_bus_init_cmd_io(bus); + /* enable interrupts after CORB/RIRB buffers are initialized above */ + azx_int_enable(bus); + /* program the position buffer */ if (bus->use_posbuf && bus->posbuf.addr) { snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr); From bd66767a8c0ecbd3f5eb0ad58da9b7fb975ee444 Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Thu, 13 Sep 2018 18:32:21 +0900 Subject: [PATCH 06/48] stmmac: fix valid numbers of unicast filter entries [ Upstream commit edf2ef7242805e53ec2e0841db26e06d8bc7da70 ] Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition. Signed-off-by: Jongsung Kim Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index d02691ba3d7f..20aa34f45f07 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -71,7 +71,7 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) * Description: * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller - * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter + * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is * selected, and defaults to 1 Unicast address if an unsupported * configuration is selected. @@ -81,8 +81,7 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) int x = ucast_entries; switch (x) { - case 1: - case 32: + case 1 ... 32: case 64: case 128: break; From f74eda8ed5d90d40ed3e0f46ddfbfe57bc6786f2 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 14 Sep 2018 17:48:10 +0200 Subject: [PATCH 07/48] net: macb: disable scatter-gather for macb on sama5d3 [ Upstream commit eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ] Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/cadence/macb.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 8c698d464716..085f77f273ba 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2743,6 +2743,13 @@ static const struct macb_config at91sam9260_config = { .init = macb_init, }; +static const struct macb_config sama5d3macb_config = { + .caps = MACB_CAPS_SG_DISABLED + | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct macb_config pc302gem_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, @@ -2801,6 +2808,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,gem", .data = &pc302gem_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, + { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config }, { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, From 51b6ff44c6d4c06489c15955ed52ba67cf20eecf Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 14 Sep 2018 17:48:11 +0200 Subject: [PATCH 08/48] ARM: dts: at91: add new compatibility string for macb on sama5d3 [ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ] We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/net/macb.txt | 1 + arch/arm/boot/dts/sama5d3_emac.dtsi | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index b5d79761ac97..410c044166e2 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -8,6 +8,7 @@ Required properties: Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. + Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; From d6a6d4e4f784be0a6957043779e85bd6a410fd4d Mon Sep 17 00:00:00 2001 From: Amber Lin Date: Wed, 12 Sep 2018 21:42:18 -0400 Subject: [PATCH 09/48] drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 [ Upstream commit caaa4c8a6be2a275bd14f2369ee364978ff74704 ] A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher Signed-off-by: Amber Lin Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c index b233cf8436b0..2e1e84c98034 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c @@ -504,7 +504,7 @@ static int kgd_hqd_sdma_destroy(struct kgd_dev *kgd, void *mqd, while (true) { temp = RREG32(sdma_base_addr + mmSDMA0_RLC0_CONTEXT_STATUS); - if (temp & SDMA0_STATUS_REG__RB_CMD_IDLE__SHIFT) + if (temp & SDMA0_RLC0_CONTEXT_STATUS__IDLE_MASK) break; if (timeout == 0) return -ETIME; From 7a3d844f83d47c432fba7d28570bc68b5015ecd0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 13 Jun 2018 00:23:11 -0400 Subject: [PATCH 10/48] ext4: add corruption check in ext4_xattr_set_entry() commit 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream. In theory this should have been caught earlier when the xattr list was verified, but in case it got missed, it's simple enough to add check to make sure we don't overrun the xattr buffer. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001 Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger [bwh: Backported to 3.16: - Add inode parameter to ext4_xattr_set_entry() and update callers - Adjust context] Signed-off-by: Ben Hutchings [adjusted for 4.4 context] Signed-off-by: Daniel Rosenberg Signed-off-by: Greg Kroah-Hartman --- fs/ext4/xattr.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index d0aaf338fa9f..d6bae37489af 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -638,14 +638,20 @@ static size_t ext4_xattr_free_space(struct ext4_xattr_entry *last, } static int -ext4_xattr_set_entry(struct ext4_xattr_info *i, struct ext4_xattr_search *s) +ext4_xattr_set_entry(struct ext4_xattr_info *i, struct ext4_xattr_search *s, + struct inode *inode) { - struct ext4_xattr_entry *last; + struct ext4_xattr_entry *last, *next; size_t free, min_offs = s->end - s->base, name_len = strlen(i->name); /* Compute min_offs and last. */ last = s->first; - for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) { + for (; !IS_LAST_ENTRY(last); last = next) { + next = EXT4_XATTR_NEXT(last); + if ((void *)next >= s->end) { + EXT4_ERROR_INODE(inode, "corrupted xattr entries"); + return -EFSCORRUPTED; + } if (!last->e_value_block && last->e_value_size) { size_t offs = le16_to_cpu(last->e_value_offs); if (offs < min_offs) @@ -825,7 +831,7 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode, ce = NULL; } ea_bdebug(bs->bh, "modifying in-place"); - error = ext4_xattr_set_entry(i, s); + error = ext4_xattr_set_entry(i, s, inode); if (!error) { if (!IS_LAST_ENTRY(s->first)) ext4_xattr_rehash(header(s->base), @@ -875,7 +881,7 @@ ext4_xattr_block_set(handle_t *handle, struct inode *inode, s->end = s->base + sb->s_blocksize; } - error = ext4_xattr_set_entry(i, s); + error = ext4_xattr_set_entry(i, s, inode); if (error == -EFSCORRUPTED) goto bad_block; if (error) @@ -1037,7 +1043,7 @@ int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode, if (EXT4_I(inode)->i_extra_isize == 0) return -ENOSPC; - error = ext4_xattr_set_entry(i, s); + error = ext4_xattr_set_entry(i, s, inode); if (error) { if (error == -ENOSPC && ext4_has_inline_data(inode)) { @@ -1049,7 +1055,7 @@ int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode, error = ext4_xattr_ibody_find(inode, i, is); if (error) return error; - error = ext4_xattr_set_entry(i, s); + error = ext4_xattr_set_entry(i, s, inode); } if (error) return error; @@ -1075,7 +1081,7 @@ static int ext4_xattr_ibody_set(handle_t *handle, struct inode *inode, if (EXT4_I(inode)->i_extra_isize == 0) return -ENOSPC; - error = ext4_xattr_set_entry(i, s); + error = ext4_xattr_set_entry(i, s, inode); if (error) return error; header = IHDR(inode, ext4_raw_inode(&is->iloc)); From 0f0ad8d548588419b5f1b8ca36673af32d3dafdf Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Fri, 5 Oct 2018 15:52:03 -0700 Subject: [PATCH 11/48] mm/vmstat.c: fix outdated vmstat_text commit 28e2c4bb99aa40f9d5f07ac130cbc4da0ea93079 upstream. 7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding entry in vmstat_text. This causes an out-of-bounds access in vmstat_show(). Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which is probably very rare. Link: http://lkml.kernel.org/r/20181001143138.95119-1-jannh@google.com Fixes: 7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") Signed-off-by: Jann Horn Reviewed-by: Kees Cook Reviewed-by: Andrew Morton Acked-by: Michal Hocko Acked-by: Roman Gushchin Cc: Davidlohr Bueso Cc: Oleg Nesterov Cc: Christoph Lameter Cc: Kemi Wang Cc: Andy Lutomirski Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/vmstat.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/vmstat.c b/mm/vmstat.c index 8895eff2d735..a2d70ef74db7 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -869,7 +869,6 @@ const char * const vmstat_text[] = { #ifdef CONFIG_DEBUG_VM_VMACACHE "vmacache_find_calls", "vmacache_find_hits", - "vmacache_full_flushes", #endif #endif /* CONFIG_VM_EVENTS_COUNTERS */ }; From 2f41f387b0f44fd5ba325d893edead8b52314437 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 17 Aug 2018 15:19:37 -0400 Subject: [PATCH 12/48] mach64: detect the dot clock divider correctly on sparc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 76ebebd2464c5c8a4453c98b6dbf9c95a599e810 upstream. On Sun Ultra 5, it happens that the dot clock is not set up properly for some videomodes. For example, if we set the videomode "r1024x768x60" in the firmware, Linux would incorrectly set a videomode with refresh rate 180Hz when booting (suprisingly, my LCD monitor can display it, although display quality is very low). The reason is this: Older mach64 cards set the divider in the register VCLK_POST_DIV. The register has four 2-bit fields (the field that is actually used is specified in the lowest two bits of the register CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards, there's another bit added - the top four bits of PLL_EXT_CNTL extend the divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12". The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets them, so it can work regardless if the card supports them. However, the sparc64 firmware may set these extended dividers during boot - and the mach64 driver detects incorrect dot clock in this case. This patch makes the driver read the additional divider bit from PLL_EXT_CNTL and calculate the initial refresh rate properly. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Acked-by: David S. Miller Reviewed-by: Ville Syrjälä Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/aty/atyfb.h | 3 ++- drivers/video/fbdev/aty/atyfb_base.c | 7 ++++--- drivers/video/fbdev/aty/mach64_ct.c | 10 +++++----- 3 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/video/fbdev/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h index 63c4842eb224..46e0e8b39b76 100644 --- a/drivers/video/fbdev/aty/atyfb.h +++ b/drivers/video/fbdev/aty/atyfb.h @@ -332,6 +332,8 @@ extern const struct aty_pll_ops aty_pll_ct; /* Integrated */ extern void aty_set_pll_ct(const struct fb_info *info, const union aty_pll *pll); extern u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par); +extern const u8 aty_postdividers[8]; + /* * Hardware cursor support @@ -358,7 +360,6 @@ static inline void wait_for_idle(struct atyfb_par *par) extern void aty_reset_engine(const struct atyfb_par *par); extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info); -extern u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par); void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index 7f658fa4d22a..9755a0ec6591 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -3093,17 +3093,18 @@ static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info, /* * PLL Reference Divider M: */ - M = pll_regs[2]; + M = pll_regs[PLL_REF_DIV]; /* * PLL Feedback Divider N (Dependent on CLOCK_CNTL): */ - N = pll_regs[7 + (clock_cntl & 3)]; + N = pll_regs[VCLK0_FB_DIV + (clock_cntl & 3)]; /* * PLL Post Divider P (Dependent on CLOCK_CNTL): */ - P = 1 << (pll_regs[6] >> ((clock_cntl & 3) << 1)); + P = aty_postdividers[((pll_regs[VCLK_POST_DIV] >> ((clock_cntl & 3) << 1)) & 3) | + ((pll_regs[PLL_EXT_CNTL] >> (2 + (clock_cntl & 3))) & 4)]; /* * PLL Divider Q: diff --git a/drivers/video/fbdev/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c index 51f29d627ceb..af54256a20a1 100644 --- a/drivers/video/fbdev/aty/mach64_ct.c +++ b/drivers/video/fbdev/aty/mach64_ct.c @@ -114,7 +114,7 @@ static void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par) */ #define Maximum_DSP_PRECISION 7 -static u8 postdividers[] = {1,2,4,8,3}; +const u8 aty_postdividers[8] = {1,2,4,8,3,5,6,12}; static int aty_dsp_gt(const struct fb_info *info, u32 bpp, struct pll_ct *pll) { @@ -221,7 +221,7 @@ static int aty_valid_pll_ct(const struct fb_info *info, u32 vclk_per, struct pll pll->vclk_post_div += (q < 64*8); pll->vclk_post_div += (q < 32*8); } - pll->vclk_post_div_real = postdividers[pll->vclk_post_div]; + pll->vclk_post_div_real = aty_postdividers[pll->vclk_post_div]; // pll->vclk_post_div <<= 6; pll->vclk_fb_div = q * pll->vclk_post_div_real / 8; pllvclk = (1000000 * 2 * pll->vclk_fb_div) / @@ -512,7 +512,7 @@ static int aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll) u8 mclk_fb_div, pll_ext_cntl; pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par); pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par); - pll->ct.xclk_post_div_real = postdividers[pll_ext_cntl & 0x07]; + pll->ct.xclk_post_div_real = aty_postdividers[pll_ext_cntl & 0x07]; mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par); if (pll_ext_cntl & PLL_MFB_TIMES_4_2B) mclk_fb_div <<= 1; @@ -534,7 +534,7 @@ static int aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll) xpost_div += (q < 64*8); xpost_div += (q < 32*8); } - pll->ct.xclk_post_div_real = postdividers[xpost_div]; + pll->ct.xclk_post_div_real = aty_postdividers[xpost_div]; pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8; #ifdef CONFIG_PPC @@ -583,7 +583,7 @@ static int aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll) mpost_div += (q < 64*8); mpost_div += (q < 32*8); } - sclk_post_div_real = postdividers[mpost_div]; + sclk_post_div_real = aty_postdividers[mpost_div]; pll->ct.sclk_fb_div = q * sclk_post_div_real / 8; pll->ct.spll_cntl2 = mpost_div << 4; #ifdef DEBUG From 49f80e6ef438982c42d9acb9175ead40d64074c1 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 11 Sep 2018 14:45:03 +0300 Subject: [PATCH 13/48] perf script python: Fix export-to-postgresql.py occasional failure commit 25e11700b54c7b6b5ebfc4361981dae12299557b upstream. Occasional export failures were found to be caused by truncating 64-bit pointers to 32-bits. Fix by explicitly setting types for all ctype arguments and results. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180911114504.28516-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman --- tools/perf/scripts/python/export-to-postgresql.py | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/perf/scripts/python/export-to-postgresql.py b/tools/perf/scripts/python/export-to-postgresql.py index 1b02cdc0cab6..84cb5913b05a 100644 --- a/tools/perf/scripts/python/export-to-postgresql.py +++ b/tools/perf/scripts/python/export-to-postgresql.py @@ -205,14 +205,23 @@ from ctypes import * libpq = CDLL("libpq.so.5") PQconnectdb = libpq.PQconnectdb PQconnectdb.restype = c_void_p +PQconnectdb.argtypes = [ c_char_p ] PQfinish = libpq.PQfinish +PQfinish.argtypes = [ c_void_p ] PQstatus = libpq.PQstatus +PQstatus.restype = c_int +PQstatus.argtypes = [ c_void_p ] PQexec = libpq.PQexec PQexec.restype = c_void_p +PQexec.argtypes = [ c_void_p, c_char_p ] PQresultStatus = libpq.PQresultStatus +PQresultStatus.restype = c_int +PQresultStatus.argtypes = [ c_void_p ] PQputCopyData = libpq.PQputCopyData +PQputCopyData.restype = c_int PQputCopyData.argtypes = [ c_void_p, c_void_p, c_int ] PQputCopyEnd = libpq.PQputCopyEnd +PQputCopyEnd.restype = c_int PQputCopyEnd.argtypes = [ c_void_p, c_void_p ] sys.path.append(os.environ['PERF_EXEC_PATH'] + \ From 863334098b60d163d39fde83d6044c54ca60d53e Mon Sep 17 00:00:00 2001 From: Edgar Cherkasov Date: Thu, 27 Sep 2018 11:56:03 +0300 Subject: [PATCH 14/48] i2c: i2c-scmi: fix for i2c_smbus_write_block_data commit 08d9db00fe0e300d6df976e6c294f974988226dd upstream. The i2c-scmi driver crashes when the SMBus Write Block transaction is executed: WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0 Call Trace: ? get_page_from_freelist+0x49d/0x11f0 ? alloc_pages_current+0x6a/0xe0 ? new_slab+0x499/0x690 __alloc_pages_nodemask+0x265/0x280 alloc_pages_current+0x6a/0xe0 kmalloc_order+0x18/0x40 kmalloc_order_trace+0x24/0xb0 ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c __kmalloc+0x203/0x220 acpi_os_allocate_zeroed+0x34/0x36 acpi_ut_copy_eobject_to_iobject+0x266/0x31e acpi_evaluate_object+0x166/0x3b2 acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi] i2c_smbus_xfer+0xda/0x370 i2cdev_ioctl_smbus+0x1bd/0x270 i2cdev_ioctl+0xaa/0x250 do_vfs_ioctl+0xa4/0x600 SyS_ioctl+0x79/0x90 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185) This problem occurs because the length of ACPI Buffer object is not defined/initialized in the code before a corresponding ACPI method is called. The obvious patch below fixes this issue. Signed-off-by: Edgar Cherkasov Acked-by: Viktor Krasnov Acked-by: Michael Brunner Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-scmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c index 7aa7b9cb6203..efefcfa24a4c 100644 --- a/drivers/i2c/busses/i2c-scmi.c +++ b/drivers/i2c/busses/i2c-scmi.c @@ -152,6 +152,7 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, mt_params[3].type = ACPI_TYPE_INTEGER; mt_params[3].integer.value = len; mt_params[4].type = ACPI_TYPE_BUFFER; + mt_params[4].buffer.length = len; mt_params[4].buffer.pointer = data->block + 1; } break; From f37a3ff6e4c7cb93eb65c6fc6c549fafa2673863 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 12 Feb 2018 14:24:47 +0200 Subject: [PATCH 15/48] xhci: Don't print a warning when setting link state for disabled ports commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream. When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating. If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled. xhci-hcd ee000000.usb: Cannot set link state. usb usb8-port1: cannot disable (err = -32) Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver. Signed-off-by: Mathias Nyman Tested-by: Yoshihiro Shimoda Signed-off-by: Ross Zwisler Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 9df00101bfe1..f788f80fe1aa 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1048,17 +1048,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = readl(port_array[wIndex]); break; } - - /* Software should not attempt to set - * port link state above '3' (U3) and the port - * must be enabled. - */ - if ((temp & PORT_PE) == 0 || - (link_state > USB_SS_PORT_LS_U3)) { - xhci_warn(xhci, "Cannot set link state.\n"); + /* Port must be enabled */ + if (!(temp & PORT_PE)) { + retval = -ENODEV; + break; + } + /* Can't set port link state above '3' (U3) */ + if (link_state > USB_SS_PORT_LS_U3) { + xhci_warn(xhci, "Cannot set port %d link state %d\n", + wIndex, link_state); goto error; } - if (link_state == USB_SS_PORT_LS_U3) { slot_id = xhci_find_slot_id_by_port(hcd, xhci, wIndex + 1); From 5ac147ebfa1c50cc0f25e3c7f42862cfe6b40d0d Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Fri, 12 Oct 2018 14:01:26 +0800 Subject: [PATCH 16/48] jffs2: return -ERANGE when xattr buffer is too small When a file have multiple xattrs and the passed buffer is smaller than the required size, jffs2_listxattr() should return -ERANGE instead of continue, else Oops may occur due to memory corruption. Also remove the unnecessary check ("rc < 0"), because xhandle->list(...) will not return an error number. Spotted by generic/377 in xfstests-dev. NB: The problem had been fixed by commit 764a5c6b1fa4 ("xattr handlers: Simplify list operation") in v4.5-rc1, but the modification in that commit may be too much because it modifies all file-systems which implement xattr, so I create a single patch for jffs2 to fix the problem. Signed-off-by: Hou Tao Cc: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- fs/jffs2/xattr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c index 4c2c03663533..8e1427762eeb 100644 --- a/fs/jffs2/xattr.c +++ b/fs/jffs2/xattr.c @@ -1004,12 +1004,14 @@ ssize_t jffs2_listxattr(struct dentry *dentry, char *buffer, size_t size) rc = xhandle->list(xhandle, dentry, buffer + len, size - len, xd->xname, xd->name_len); + if (rc > size - len) { + rc = -ERANGE; + goto out; + } } else { rc = xhandle->list(xhandle, dentry, NULL, 0, xd->xname, xd->name_len); } - if (rc < 0) - goto out; len += rc; } rc = len; From 4348b96650bb03e0fa6cf5704ffc1a6517db4970 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 26 Sep 2018 00:41:04 -0400 Subject: [PATCH 17/48] bnxt_en: Fix TX timeout during netpoll. [ Upstream commit 73f21c653f930f438d53eed29b5e4c65c8a0f906 ] The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet Reported-by: Song Liu Reviewed-by: Song Liu Tested-by: Song Liu Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 4ffacafddacb..fea8116da06a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1343,8 +1343,11 @@ static int bnxt_poll_work(struct bnxt *bp, struct bnxt_napi *bnapi, int budget) if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) { tx_pkts++; /* return full budget so NAPI will complete. */ - if (unlikely(tx_pkts > bp->tx_wake_thresh)) + if (unlikely(tx_pkts > bp->tx_wake_thresh)) { rx_pkts = budget; + raw_cons = NEXT_RAW_CMP(raw_cons); + break; + } } else if ((TX_CMP_TYPE(txcmp) & 0x30) == 0x10) { rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &agg_event); if (likely(rc >= 0)) @@ -1362,7 +1365,7 @@ static int bnxt_poll_work(struct bnxt *bp, struct bnxt_napi *bnapi, int budget) } raw_cons = NEXT_RAW_CMP(raw_cons); - if (rx_pkts == budget) + if (rx_pkts && rx_pkts == budget) break; } @@ -1404,8 +1407,12 @@ static int bnxt_poll(struct napi_struct *napi, int budget) while (1) { work_done += bnxt_poll_work(bp, bnapi, budget - work_done); - if (work_done >= budget) + if (work_done >= budget) { + if (!budget) + BNXT_CP_DB_REARM(cpr->cp_doorbell, + cpr->cp_raw_cons); break; + } if (!bnxt_has_work(bp, cpr)) { napi_complete(napi); From 2691921c7d26efc18400162b77c794d6a921afe5 Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Mon, 24 Sep 2018 14:40:11 -0700 Subject: [PATCH 18/48] bonding: avoid possible dead-lock [ Upstream commit d4859d749aa7090ffb743d15648adb962a1baeae ] Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/bonding/bond_main.c | 43 +++++++++++++-------------------- include/net/bonding.h | 7 +----- 2 files changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 339118f3c718..78da1b7b4d86 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -216,6 +216,7 @@ static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev, static void bond_slave_arr_handler(struct work_struct *work); static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, int mod); +static void bond_netdev_notify_work(struct work_struct *work); /*---------------------------- General routines -----------------------------*/ @@ -1237,6 +1238,8 @@ static struct slave *bond_alloc_slave(struct bonding *bond) return NULL; } } + INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work); + return slave; } @@ -1244,6 +1247,7 @@ static void bond_free_slave(struct slave *slave) { struct bonding *bond = bond_get_bond_by_slave(slave); + cancel_delayed_work_sync(&slave->notify_work); if (BOND_MODE(bond) == BOND_MODE_8023AD) kfree(SLAVE_AD_INFO(slave)); @@ -1265,39 +1269,26 @@ static void bond_fill_ifslave(struct slave *slave, struct ifslave *info) info->link_failure_count = slave->link_failure_count; } -static void bond_netdev_notify(struct net_device *dev, - struct netdev_bonding_info *info) -{ - rtnl_lock(); - netdev_bonding_info_change(dev, info); - rtnl_unlock(); -} - static void bond_netdev_notify_work(struct work_struct *_work) { - struct netdev_notify_work *w = - container_of(_work, struct netdev_notify_work, work.work); + struct slave *slave = container_of(_work, struct slave, + notify_work.work); - bond_netdev_notify(w->dev, &w->bonding_info); - dev_put(w->dev); - kfree(w); + if (rtnl_trylock()) { + struct netdev_bonding_info binfo; + + bond_fill_ifslave(slave, &binfo.slave); + bond_fill_ifbond(slave->bond, &binfo.master); + netdev_bonding_info_change(slave->dev, &binfo); + rtnl_unlock(); + } else { + queue_delayed_work(slave->bond->wq, &slave->notify_work, 1); + } } void bond_queue_slave_event(struct slave *slave) { - struct bonding *bond = slave->bond; - struct netdev_notify_work *nnw = kzalloc(sizeof(*nnw), GFP_ATOMIC); - - if (!nnw) - return; - - dev_hold(slave->dev); - nnw->dev = slave->dev; - bond_fill_ifslave(slave, &nnw->bonding_info.slave); - bond_fill_ifbond(bond, &nnw->bonding_info.master); - INIT_DELAYED_WORK(&nnw->work, bond_netdev_notify_work); - - queue_delayed_work(slave->bond->wq, &nnw->work, 0); + queue_delayed_work(slave->bond->wq, &slave->notify_work, 0); } /* enslave device to bond device */ diff --git a/include/net/bonding.h b/include/net/bonding.h index 93abe5f6188d..d5abd3a80896 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -146,12 +146,6 @@ struct bond_parm_tbl { int mode; }; -struct netdev_notify_work { - struct delayed_work work; - struct net_device *dev; - struct netdev_bonding_info bonding_info; -}; - struct slave { struct net_device *dev; /* first - useful for panic debug */ struct bonding *bond; /* our master */ @@ -177,6 +171,7 @@ struct slave { #ifdef CONFIG_NET_POLL_CONTROLLER struct netpoll *np; #endif + struct delayed_work notify_work; struct kobject kobj; struct rtnl_link_stats64 slave_stats; }; From 20f16d1a3817523350e9c5b5a231c4cb2cf0ab3f Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 19 Sep 2018 15:02:07 +0200 Subject: [PATCH 19/48] ip6_tunnel: be careful when accessing the inner header [ Upstream commit 76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc ] the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by: Alexander Potapenko Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv6/ip6_tunnel.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index e8f21dd520b2..7c7a74ea2b0d 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1096,7 +1096,7 @@ static inline int ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ip6_tnl *t = netdev_priv(dev); - const struct iphdr *iph = ip_hdr(skb); + const struct iphdr *iph; int encap_limit = -1; struct flowi6 fl6; __u8 dsfield; @@ -1104,6 +1104,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) u8 tproto; int err; + /* ensure we can access the full inner ip header */ + if (!pskb_may_pull(skb, sizeof(struct iphdr))) + return -1; + + iph = ip_hdr(skb); memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); tproto = ACCESS_ONCE(t->parms.proto); @@ -1140,7 +1145,7 @@ static inline int ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ip6_tnl *t = netdev_priv(dev); - struct ipv6hdr *ipv6h = ipv6_hdr(skb); + struct ipv6hdr *ipv6h; int encap_limit = -1; __u16 offset; struct flowi6 fl6; @@ -1149,6 +1154,10 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) u8 tproto; int err; + if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h)))) + return -1; + + ipv6h = ipv6_hdr(skb); tproto = ACCESS_ONCE(t->parms.proto); if ((tproto != IPPROTO_IPV6 && tproto != 0) || ip6_tnl_addr_conflict(t, ipv6h)) From f9d3572816ba724129da0ec2ecd590d5c899e86e Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Mon, 24 Sep 2018 15:48:19 +0200 Subject: [PATCH 20/48] ip_tunnel: be careful when accessing the inner header [ Upstream commit ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2] Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") even for ipv4 tunnels. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Suggested-by: Cong Wang Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/ip_tunnel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 3d62feb65932..9d3176b080a4 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -597,6 +597,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params, u8 protocol) { struct ip_tunnel *tunnel = netdev_priv(dev); + unsigned int inner_nhdr_len = 0; const struct iphdr *inner_iph; struct flowi4 fl4; u8 tos, ttl; @@ -607,6 +608,14 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, int err; bool connected; + /* ensure we can access the inner net header, for several users below */ + if (skb->protocol == htons(ETH_P_IP)) + inner_nhdr_len = sizeof(struct iphdr); + else if (skb->protocol == htons(ETH_P_IPV6)) + inner_nhdr_len = sizeof(struct ipv6hdr); + if (unlikely(!pskb_may_pull(skb, inner_nhdr_len))) + goto tx_error; + inner_iph = (const struct iphdr *)skb_inner_network_header(skb); connected = (tunnel->parms.iph.daddr != 0); From d7148eeb647fd55909f985ad14b0176ff1fae335 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 30 Sep 2018 11:33:39 -0700 Subject: [PATCH 21/48] ipv4: fix use-after-free in ip_cmsg_recv_dstaddr() [ Upstream commit 64199fc0a46ba211362472f7f942f900af9492fd ] Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy, do not do it. Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Reported-by: syzbot Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv4/ip_sockglue.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 88426a6a7a85..3f8caf7d19b8 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -134,7 +134,6 @@ static void ip_cmsg_recv_security(struct msghdr *msg, struct sk_buff *skb) static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb) { struct sockaddr_in sin; - const struct iphdr *iph = ip_hdr(skb); __be16 *ports; int end; @@ -149,7 +148,7 @@ static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb) ports = (__be16 *)skb_transport_header(skb); sin.sin_family = AF_INET; - sin.sin_addr.s_addr = iph->daddr; + sin.sin_addr.s_addr = ip_hdr(skb)->daddr; sin.sin_port = ports[1]; memset(sin.sin_zero, 0, sizeof(sin.sin_zero)); From 2b7e4c735933be79882aba2bed9afa789e03c62f Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 9 Oct 2018 17:48:14 +0200 Subject: [PATCH 22/48] net: ipv4: update fnhe_pmtu when first hop's MTU changes [ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ] Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- include/linux/netdevice.h | 7 ++++++ include/net/ip_fib.h | 1 + net/core/dev.c | 28 ++++++++++++++++++++-- net/ipv4/fib_frontend.c | 12 ++++++---- net/ipv4/fib_semantics.c | 50 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 92 insertions(+), 6 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index fc54049e8286..0b211d482c96 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2168,6 +2168,13 @@ struct netdev_notifier_info { struct net_device *dev; }; +struct netdev_notifier_info_ext { + struct netdev_notifier_info info; /* must be first */ + union { + u32 mtu; + } ext; +}; + struct netdev_notifier_change_info { struct netdev_notifier_info info; /* must be first */ unsigned int flags_changed; diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 3afb7c4c7098..2a25b53cd427 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -322,6 +322,7 @@ int ip_fib_check_default(__be32 gw, struct net_device *dev); int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force); int fib_sync_down_addr(struct net *net, __be32 local); int fib_sync_up(struct net_device *dev, unsigned int nh_flags); +void fib_sync_mtu(struct net_device *dev, u32 orig_mtu); extern u32 fib_multipath_secret __read_mostly; diff --git a/net/core/dev.c b/net/core/dev.c index 191cf880d805..7366feb8b5b3 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1660,6 +1660,28 @@ int call_netdevice_notifiers(unsigned long val, struct net_device *dev) } EXPORT_SYMBOL(call_netdevice_notifiers); +/** + * call_netdevice_notifiers_mtu - call all network notifier blocks + * @val: value passed unmodified to notifier function + * @dev: net_device pointer passed unmodified to notifier function + * @arg: additional u32 argument passed to the notifier function + * + * Call all network notifier blocks. Parameters and return value + * are as for raw_notifier_call_chain(). + */ +static int call_netdevice_notifiers_mtu(unsigned long val, + struct net_device *dev, u32 arg) +{ + struct netdev_notifier_info_ext info = { + .info.dev = dev, + .ext.mtu = arg, + }; + + BUILD_BUG_ON(offsetof(struct netdev_notifier_info_ext, info) != 0); + + return call_netdevice_notifiers_info(val, dev, &info.info); +} + #ifdef CONFIG_NET_INGRESS static struct static_key ingress_needed __read_mostly; @@ -6134,14 +6156,16 @@ int dev_set_mtu(struct net_device *dev, int new_mtu) err = __dev_set_mtu(dev, new_mtu); if (!err) { - err = call_netdevice_notifiers(NETDEV_CHANGEMTU, dev); + err = call_netdevice_notifiers_mtu(NETDEV_CHANGEMTU, dev, + orig_mtu); err = notifier_to_errno(err); if (err) { /* setting mtu back and notifying everyone again, * so that they have a chance to revert changes. */ __dev_set_mtu(dev, orig_mtu); - call_netdevice_notifiers(NETDEV_CHANGEMTU, dev); + call_netdevice_notifiers_mtu(NETDEV_CHANGEMTU, dev, + new_mtu); } } return err; diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 015c33712803..ce646572b912 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -1170,7 +1170,8 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, static int fib_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) { struct net_device *dev = netdev_notifier_info_to_dev(ptr); - struct netdev_notifier_changeupper_info *info; + struct netdev_notifier_changeupper_info *upper_info = ptr; + struct netdev_notifier_info_ext *info_ext = ptr; struct in_device *in_dev; struct net *net = dev_net(dev); unsigned int flags; @@ -1205,16 +1206,19 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo fib_sync_up(dev, RTNH_F_LINKDOWN); else fib_sync_down_dev(dev, event, false); - /* fall through */ + rt_cache_flush(net); + break; case NETDEV_CHANGEMTU: + fib_sync_mtu(dev, info_ext->ext.mtu); rt_cache_flush(net); break; case NETDEV_CHANGEUPPER: - info = ptr; + upper_info = ptr; /* flush all routes if dev is linked to or unlinked from * an L3 master device (e.g., VRF) */ - if (info->upper_dev && netif_is_l3_master(info->upper_dev)) + if (upper_info->upper_dev && + netif_is_l3_master(upper_info->upper_dev)) fib_disable_ip(dev, NETDEV_DOWN, true); break; } diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 03ebff3950d8..3109b9bb95d2 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1373,6 +1373,56 @@ int fib_sync_down_addr(struct net *net, __be32 local) return ret; } +/* Update the PMTU of exceptions when: + * - the new MTU of the first hop becomes smaller than the PMTU + * - the old MTU was the same as the PMTU, and it limited discovery of + * larger MTUs on the path. With that limit raised, we can now + * discover larger MTUs + * A special case is locked exceptions, for which the PMTU is smaller + * than the minimal accepted PMTU: + * - if the new MTU is greater than the PMTU, don't make any change + * - otherwise, unlock and set PMTU + */ +static void nh_update_mtu(struct fib_nh *nh, u32 new, u32 orig) +{ + struct fnhe_hash_bucket *bucket; + int i; + + bucket = rcu_dereference_protected(nh->nh_exceptions, 1); + if (!bucket) + return; + + for (i = 0; i < FNHE_HASH_SIZE; i++) { + struct fib_nh_exception *fnhe; + + for (fnhe = rcu_dereference_protected(bucket[i].chain, 1); + fnhe; + fnhe = rcu_dereference_protected(fnhe->fnhe_next, 1)) { + if (fnhe->fnhe_mtu_locked) { + if (new <= fnhe->fnhe_pmtu) { + fnhe->fnhe_pmtu = new; + fnhe->fnhe_mtu_locked = false; + } + } else if (new < fnhe->fnhe_pmtu || + orig == fnhe->fnhe_pmtu) { + fnhe->fnhe_pmtu = new; + } + } + } +} + +void fib_sync_mtu(struct net_device *dev, u32 orig_mtu) +{ + unsigned int hash = fib_devindex_hashfn(dev->ifindex); + struct hlist_head *head = &fib_info_devhash[hash]; + struct fib_nh *nh; + + hlist_for_each_entry(nh, head, nh_hash) { + if (nh->nh_dev == dev) + nh_update_mtu(nh, dev->mtu, orig_mtu); + } +} + /* Event force Flags Description * NETDEV_CHANGE 0 LINKDOWN Carrier OFF, not for scope host * NETDEV_DOWN 0 LINKDOWN|DEAD Link down, not for scope host From 9ee4a60d618e8cf9ba6228139fae35c4ba3d4df0 Mon Sep 17 00:00:00 2001 From: Jeff Barnhill <0xeffeff@gmail.com> Date: Fri, 21 Sep 2018 00:45:27 +0000 Subject: [PATCH 23/48] net/ipv6: Display all addresses in output of /proc/net/if_inet6 [ Upstream commit 86f9bd1ff61c413a2a251fa736463295e4e24733 ] The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/ipv6/addrconf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 0613be57513e..582e757e5727 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3786,7 +3786,6 @@ static struct inet6_ifaddr *if6_get_first(struct seq_file *seq, loff_t pos) p++; continue; } - state->offset++; return ifa; } @@ -3810,13 +3809,12 @@ static struct inet6_ifaddr *if6_get_next(struct seq_file *seq, return ifa; } + state->offset = 0; while (++state->bucket < IN6_ADDR_HSIZE) { - state->offset = 0; hlist_for_each_entry_rcu_bh(ifa, &inet6_addr_lst[state->bucket], addr_lst) { if (!net_eq(dev_net(ifa->idev->dev), net)) continue; - state->offset++; return ifa; } } From 1f3a2366922b3e0e1af3df011dae20929d3a8204 Mon Sep 17 00:00:00 2001 From: Sean Tranchetti Date: Thu, 20 Sep 2018 14:29:45 -0600 Subject: [PATCH 24/48] netlabel: check for IPV4MASK in addrinfo_get [ Upstream commit f88b4c01b97e09535505cf3c327fdbce55c27f00 ] netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by: Sean Tranchetti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/netlabel/netlabel_unlabeled.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index 3f33ec44bd28..9f4ec16abfcf 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -787,7 +787,8 @@ static int netlbl_unlabel_addrinfo_get(struct genl_info *info, { u32 addr_len; - if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR]) { + if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR] && + info->attrs[NLBL_UNLABEL_A_IPV4MASK]) { addr_len = nla_len(info->attrs[NLBL_UNLABEL_A_IPV4ADDR]); if (addr_len != sizeof(struct in_addr) && addr_len != nla_len(info->attrs[NLBL_UNLABEL_A_IPV4MASK])) From 0aa059ea2dacc7383052f9b2380edd3964f23033 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Fri, 28 Sep 2018 17:04:30 -0600 Subject: [PATCH 25/48] net/usb: cancel pending work when unbinding smsc75xx [ Upstream commit f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ] Cancel pending work before freeing smsc75xx private data structure during binding. This fixes the following crash in the driver: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: mutex_lock+0x2b/0x3f Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx] task: ffff8caa83e85700 task.stack: ffff948b80518000 RIP: 0010:mutex_lock+0x2b/0x3f Call Trace: smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx] process_one_work+0x18d/0x2fc worker_thread+0x1a2/0x269 ? pr_cont_work+0x58/0x58 kthread+0xfa/0x10a ? pr_cont_work+0x58/0x58 ? rcu_read_unlock_sched_notrace+0x48/0x48 ret_from_fork+0x22/0x40 Signed-off-by: Yu Zhao Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/smsc75xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 478937418a33..8dbe086e0a96 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1506,6 +1506,7 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf) { struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); if (pdata) { + cancel_work_sync(&pdata->set_multicast); netif_dbg(dev, ifdown, dev->net, "free pdata\n"); kfree(pdata); pdata = NULL; From 2f04cacdcd5bc4227d0d4ed6be08da6f959168c8 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Wed, 26 Sep 2018 12:41:10 -0700 Subject: [PATCH 26/48] qlcnic: fix Tx descriptor corruption on 82xx devices [ Upstream commit c333fa0c4f220f8f7ea5acd6b0ebf3bf13fd684d ] In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism") Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 8 +++++--- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 3 ++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 3 ++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 3 ++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 12 ++++++------ 5 files changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 55007f1e6bbc..12cd8aef1881 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1802,7 +1802,8 @@ struct qlcnic_hardware_ops { int (*config_loopback) (struct qlcnic_adapter *, u8); int (*clear_loopback) (struct qlcnic_adapter *, u8); int (*config_promisc_mode) (struct qlcnic_adapter *, u32); - void (*change_l2_filter) (struct qlcnic_adapter *, u64 *, u16); + void (*change_l2_filter)(struct qlcnic_adapter *adapter, u64 *addr, + u16 vlan, struct qlcnic_host_tx_ring *tx_ring); int (*get_board_info) (struct qlcnic_adapter *); void (*set_mac_filter_count) (struct qlcnic_adapter *); void (*free_mac_list) (struct qlcnic_adapter *); @@ -2044,9 +2045,10 @@ static inline int qlcnic_nic_set_promisc(struct qlcnic_adapter *adapter, } static inline void qlcnic_change_filter(struct qlcnic_adapter *adapter, - u64 *addr, u16 id) + u64 *addr, u16 vlan, + struct qlcnic_host_tx_ring *tx_ring) { - adapter->ahw->hw_ops->change_l2_filter(adapter, addr, id); + adapter->ahw->hw_ops->change_l2_filter(adapter, addr, vlan, tx_ring); } static inline int qlcnic_get_board_info(struct qlcnic_adapter *adapter) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index b4f3cb55605e..7f7aea9758e7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2132,7 +2132,8 @@ out: } void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr, - u16 vlan_id) + u16 vlan_id, + struct qlcnic_host_tx_ring *tx_ring) { u8 mac[ETH_ALEN]; memcpy(&mac, addr, ETH_ALEN); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 331ae2c20f40..c8e012b3f7e7 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -550,7 +550,8 @@ int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32); int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32); int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *, int); int qlcnic_83xx_config_rss(struct qlcnic_adapter *, int); -void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *, u64 *, u16); +void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr, + u16 vlan, struct qlcnic_host_tx_ring *ring); int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *); int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *); void qlcnic_83xx_initialize_nic(struct qlcnic_adapter *, int); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 4bb33af8e2b3..56a3bd9e37dc 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -173,7 +173,8 @@ int qlcnic_82xx_napi_add(struct qlcnic_adapter *adapter, struct net_device *netdev); void qlcnic_82xx_get_beacon_state(struct qlcnic_adapter *); void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, - u64 *uaddr, u16 vlan_id); + u64 *uaddr, u16 vlan_id, + struct qlcnic_host_tx_ring *tx_ring); int qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *, struct ethtool_coalesce *); int qlcnic_82xx_set_rx_coalesce(struct qlcnic_adapter *); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index d4b5085a21fa..98042a3701b5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -269,13 +269,12 @@ static void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter, } void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, - u16 vlan_id) + u16 vlan_id, struct qlcnic_host_tx_ring *tx_ring) { struct cmd_desc_type0 *hwdesc; struct qlcnic_nic_req *req; struct qlcnic_mac_req *mac_req; struct qlcnic_vlan_req *vlan_req; - struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring; u32 producer; u64 word; @@ -302,7 +301,8 @@ void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, static void qlcnic_send_filter(struct qlcnic_adapter *adapter, struct cmd_desc_type0 *first_desc, - struct sk_buff *skb) + struct sk_buff *skb, + struct qlcnic_host_tx_ring *tx_ring) { struct vlan_ethhdr *vh = (struct vlan_ethhdr *)(skb->data); struct ethhdr *phdr = (struct ethhdr *)(skb->data); @@ -336,7 +336,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, tmp_fil->vlan_id == vlan_id) { if (jiffies > (QLCNIC_READD_AGE * HZ + tmp_fil->ftime)) qlcnic_change_filter(adapter, &src_addr, - vlan_id); + vlan_id, tx_ring); tmp_fil->ftime = jiffies; return; } @@ -351,7 +351,7 @@ static void qlcnic_send_filter(struct qlcnic_adapter *adapter, if (!fil) return; - qlcnic_change_filter(adapter, &src_addr, vlan_id); + qlcnic_change_filter(adapter, &src_addr, vlan_id, tx_ring); fil->ftime = jiffies; fil->vlan_id = vlan_id; memcpy(fil->faddr, &src_addr, ETH_ALEN); @@ -767,7 +767,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) } if (adapter->drv_mac_learn) - qlcnic_send_filter(adapter, first_desc, skb); + qlcnic_send_filter(adapter, first_desc, skb, tx_ring); tx_ring->tx_stats.tx_bytes += skb->len; tx_ring->tx_stats.xmit_called++; From e0fff89962d3d30cf677b3c0e7a2f379d7ef0f3a Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 1 Oct 2018 12:21:59 +0300 Subject: [PATCH 27/48] team: Forbid enslaving team device to itself [ Upstream commit 471b83bd8bbe4e89743683ef8ecb78f7029d8288 ] team's ndo_add_slave() acquires 'team->lock' and later tries to open the newly enslaved device via dev_open(). This emits a 'NETDEV_UP' event that causes the VLAN driver to add VLAN 0 on the team device. team's ndo_vlan_rx_add_vid() will also try to acquire 'team->lock' and deadlock. Fix this by checking early at the enslavement function that a team device is not being enslaved to itself. A similar check was added to the bond driver in commit 09a89c219baf ("bonding: disallow enslaving a bond to itself"). WARNING: possible recursive locking detected 4.18.0-rc7+ #176 Not tainted -------------------------------------------- syz-executor4/6391 is trying to acquire lock: (____ptrval____) (&team->lock){+.+.}, at: team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868 but task is already holding lock: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&team->lock); lock(&team->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by syz-executor4/6391: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4662 #1: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947 stack backtrace: CPU: 1 PID: 6391 Comm: syz-executor4 Not tainted 4.18.0-rc7+ #176 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __mutex_lock_common kernel/locking/mutex.c:757 [inline] __mutex_lock+0x176/0x1820 kernel/locking/mutex.c:894 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:909 team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868 vlan_add_rx_filter_info+0x14a/0x1d0 net/8021q/vlan_core.c:210 __vlan_vid_add net/8021q/vlan_core.c:278 [inline] vlan_vid_add+0x63e/0x9d0 net/8021q/vlan_core.c:308 vlan_device_event.cold.12+0x2a/0x2f net/8021q/vlan.c:381 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] dev_open+0x173/0x1b0 net/core/dev.c:1433 team_port_add drivers/net/team/team.c:1219 [inline] team_add_slave+0xa8b/0x1c30 drivers/net/team/team.c:1948 do_set_master+0x1c9/0x220 net/core/rtnetlink.c:2248 do_setlink+0xba4/0x3e10 net/core/rtnetlink.c:2382 rtnl_setlink+0x2a9/0x400 net/core/rtnetlink.c:2636 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4665 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2455 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4683 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfd0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:642 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:652 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2126 __sys_sendmsg+0x11d/0x290 net/socket.c:2164 __do_sys_sendmsg net/socket.c:2173 [inline] __se_sys_sendmsg net/socket.c:2171 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x456b29 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f9706bf8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f9706bf96d4 RCX: 0000000000456b29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d3548 R14: 00000000004c8227 R15: 0000000000000000 Fixes: 87002b03baab ("net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls") Signed-off-by: Ido Schimmel Reported-and-tested-by: syzbot+bd051aba086537515cdb@syzkaller.appspotmail.com Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/team/team.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 49174837c2ba..33ffb573fd67 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1142,6 +1142,11 @@ static int team_port_add(struct team *team, struct net_device *port_dev) return -EBUSY; } + if (dev == port_dev) { + netdev_err(dev, "Cannot enslave team device to itself\n"); + return -EINVAL; + } + if (port_dev->features & NETIF_F_VLAN_CHALLENGED && vlan_uses_dev(dev)) { netdev_err(dev, "Device %s is VLAN challenged and team device has VLAN set up\n", From 2b2c9306e3cd90d508384a3d94dabf59d24824e6 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Fri, 5 Oct 2018 09:04:40 +0200 Subject: [PATCH 28/48] net: mvpp2: Extract the correct ethtype from the skb for tx csum offload [ Upstream commit 35f3625c21852ad839f20c91c7d81c4c1101e207 ] When offloading the L3 and L4 csum computation on TX, we need to extract the l3_proto from the ethtype, independently of the presence of a vlan tag. The actual driver uses skb->protocol as-is, resulting in packets with the wrong L4 checksum being sent when there's a vlan tag in the packet header and checksum offloading is enabled. This commit makes use of vlan_protocol_get() to get the correct ethtype regardless the presence of a vlan tag. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/marvell/mvpp2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c index ac92685dd4e5..42305f3234ff 100644 --- a/drivers/net/ethernet/marvell/mvpp2.c +++ b/drivers/net/ethernet/marvell/mvpp2.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -4268,7 +4269,7 @@ static void mvpp2_txq_desc_put(struct mvpp2_tx_queue *txq) } /* Set Tx descriptors fields relevant for CSUM calculation */ -static u32 mvpp2_txq_desc_csum(int l3_offs, int l3_proto, +static u32 mvpp2_txq_desc_csum(int l3_offs, __be16 l3_proto, int ip_hdr_len, int l4_proto) { u32 command; @@ -5032,14 +5033,15 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb) if (skb->ip_summed == CHECKSUM_PARTIAL) { int ip_hdr_len = 0; u8 l4_proto; + __be16 l3_proto = vlan_get_protocol(skb); - if (skb->protocol == htons(ETH_P_IP)) { + if (l3_proto == htons(ETH_P_IP)) { struct iphdr *ip4h = ip_hdr(skb); /* Calculate IPv4 checksum and L4 checksum */ ip_hdr_len = ip4h->ihl; l4_proto = ip4h->protocol; - } else if (skb->protocol == htons(ETH_P_IPV6)) { + } else if (l3_proto == htons(ETH_P_IPV6)) { struct ipv6hdr *ip6h = ipv6_hdr(skb); /* Read l4_protocol from one of IPv6 extra headers */ @@ -5051,7 +5053,7 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb) } return mvpp2_txq_desc_csum(skb_network_offset(skb), - skb->protocol, ip_hdr_len, l4_proto); + l3_proto, ip_hdr_len, l4_proto); } return MVPP2_TXD_L4_CSUM_NOT | MVPP2_TXD_IP_CSUM_DISABLE; From 59b6d2e59b290ebd597c3e249477d6866d275ce2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 2 Oct 2018 16:52:03 -0700 Subject: [PATCH 29/48] net: systemport: Fix wake-up interrupt race during resume [ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ] The AON_PM_L2 is normally used to trigger and identify the source of a wake-up event. Since the RX_SYS clock is no longer turned off, we also have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and that interrupt remains active up until the magic packet detector is disabled which happens much later during the driver resumption. The race happens if we have a CPU that is entering the SYSTEMPORT INTRL2_0 handler during resume, and another CPU has managed to clear the wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we have the first CPU stuck in the interrupt handler with an interrupt cause that has been cleared under its feet, and so we keep returning IRQ_NONE and we never make any progress. This was not a problem before because we would always turn off the RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned off as well, thus not latching the interrupt. The fix is to make sure we do not enable either the MPD or BRCM_TAG_MATCH interrupts since those are redundant with what the AON_PM_L2 interrupt controller already processes and they would cause such a race to occur. Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER") Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/broadcom/bcmsysport.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index af9ec57bbebf..7a6dd5e5e498 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -850,14 +850,22 @@ static void bcm_sysport_resume_from_wol(struct bcm_sysport_priv *priv) { u32 reg; - /* Stop monitoring MPD interrupt */ - intrl2_0_mask_set(priv, INTRL2_0_MPD); - /* Clear the MagicPacket detection logic */ reg = umac_readl(priv, UMAC_MPD_CTRL); reg &= ~MPD_EN; umac_writel(priv, reg, UMAC_MPD_CTRL); + reg = intrl2_0_readl(priv, INTRL2_CPU_STATUS); + if (reg & INTRL2_0_MPD) + netdev_info(priv->netdev, "Wake-on-LAN (MPD) interrupt!\n"); + + if (reg & INTRL2_0_BRCM_MATCH_TAG) { + reg = rxchk_readl(priv, RXCHK_BRCM_TAG_MATCH_STATUS) & + RXCHK_BRCM_TAG_MATCH_MASK; + netdev_info(priv->netdev, + "Wake-on-LAN (filters 0x%02x) interrupt!\n", reg); + } + netif_dbg(priv, wol, priv->netdev, "resumed from WOL\n"); } @@ -890,11 +898,6 @@ static irqreturn_t bcm_sysport_rx_isr(int irq, void *dev_id) if (priv->irq0_stat & INTRL2_0_TX_RING_FULL) bcm_sysport_tx_reclaim_all(priv); - if (priv->irq0_stat & INTRL2_0_MPD) { - netdev_info(priv->netdev, "Wake-on-LAN interrupt!\n"); - bcm_sysport_resume_from_wol(priv); - } - return IRQ_HANDLED; } @@ -1915,9 +1918,6 @@ static int bcm_sysport_suspend_to_wol(struct bcm_sysport_priv *priv) /* UniMAC receive needs to be turned on */ umac_enable_set(priv, CMD_RX_EN, 1); - /* Enable the interrupt wake-up source */ - intrl2_0_mask_clear(priv, INTRL2_0_MPD); - netif_dbg(priv, wol, ndev, "entered WOL mode\n"); return 0; From dcea9310efa8d0f790509770341be4ea5bfc63b3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Oct 2018 15:47:35 -0700 Subject: [PATCH 30/48] rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096 [ Upstream commit 0e1d6eca5113858ed2caea61a5adc03c595f6096 ] We have an impressive number of syzkaller bugs that are linked to the fact that syzbot was able to create a networking device with millions of TX (or RX) queues. Let's limit the number of RX/TX queues to 4096, this really should cover all known cases. A separate patch will add various cond_resched() in the loops handling sysfs entries at device creation and dismantle. Tested: lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap RTNETLINK answers: Invalid argument lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap real 0m0.180s user 0m0.000s sys 0m0.107s Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/core/rtnetlink.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 96c9c0f0905a..f1df04c7d395 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2116,6 +2116,12 @@ struct net_device *rtnl_create_link(struct net *net, else if (ops->get_num_rx_queues) num_rx_queues = ops->get_num_rx_queues(); + if (num_tx_queues < 1 || num_tx_queues > 4096) + return ERR_PTR(-EINVAL); + + if (num_rx_queues < 1 || num_rx_queues > 4096) + return ERR_PTR(-EINVAL); + err = -ENOMEM; dev = alloc_netdev_mqs(ops->priv_size, ifname, name_assign_type, ops->setup, num_tx_queues, num_rx_queues); From 84037eebce3a51a135149bcb16fe01bcdf6d7711 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 8 Mar 2016 10:00:11 +0100 Subject: [PATCH 31/48] KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch commit 5a5fbdc0e3f1159a734f1890da60fce70e98271d upstream. It is now equal to use_eager_fpu(), which simply tests a cpufeature bit. Signed-off-by: Paolo Bonzini Signed-off-by: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/kvm_host.h | 1 - arch/x86/kvm/cpuid.c | 3 +-- arch/x86/kvm/x86.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 74fda1a453bd..3a37cdbdfbaa 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -439,7 +439,6 @@ struct kvm_vcpu_arch { struct kvm_mmu_memory_cache mmu_page_header_cache; struct fpu guest_fpu; - bool eager_fpu; u64 xcr0; u64 guest_supported_xcr0; u32 guest_xstate_size; diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 83d6369c45f5..7b4ea5e2a68f 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -104,8 +104,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); - vcpu->arch.eager_fpu = use_eager_fpu(); - if (vcpu->arch.eager_fpu) + if (use_eager_fpu()) kvm_x86_ops->fpu_activate(vcpu); /* diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 53d43d22a84b..660d8a0575cf 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7325,7 +7325,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) * Every 255 times fpu_counter rolls over to 0; a guest that uses * the FPU in bursts will revert to loading it on demand. */ - if (!vcpu->arch.eager_fpu) { + if (!use_eager_fpu()) { if (++vcpu->fpu_counter < 5) kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); } From 8c6b69cf4bd3e1f4a35d5e8ab2b4c428fcff348f Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 4 Oct 2016 20:34:33 -0400 Subject: [PATCH 32/48] x86/fpu: Remove use_eager_fpu() commit c592b57347069abfc0dcad3b3a302cf882602597 upstream. This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all. Signed-off-by: Andy Lutomirski Signed-off-by: Rik van Riel Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Thomas Gleixner Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman --- arch/x86/crypto/crc32c-intel_glue.c | 17 +++---------- arch/x86/include/asm/fpu/internal.h | 34 +------------------------- arch/x86/kernel/fpu/core.c | 38 ++++------------------------- arch/x86/kernel/fpu/signal.c | 8 +++--- arch/x86/kvm/cpuid.c | 4 +-- arch/x86/kvm/x86.c | 10 -------- 6 files changed, 14 insertions(+), 97 deletions(-) diff --git a/arch/x86/crypto/crc32c-intel_glue.c b/arch/x86/crypto/crc32c-intel_glue.c index 715399b14ed7..c194d5717ae5 100644 --- a/arch/x86/crypto/crc32c-intel_glue.c +++ b/arch/x86/crypto/crc32c-intel_glue.c @@ -48,21 +48,13 @@ #ifdef CONFIG_X86_64 /* * use carryless multiply version of crc32c when buffer - * size is >= 512 (when eager fpu is enabled) or - * >= 1024 (when eager fpu is disabled) to account + * size is >= 512 to account * for fpu state save/restore overhead. */ -#define CRC32C_PCL_BREAKEVEN_EAGERFPU 512 -#define CRC32C_PCL_BREAKEVEN_NOEAGERFPU 1024 +#define CRC32C_PCL_BREAKEVEN 512 asmlinkage unsigned int crc_pcl(const u8 *buffer, int len, unsigned int crc_init); -static int crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_EAGERFPU; -#define set_pcl_breakeven_point() \ -do { \ - if (!use_eager_fpu()) \ - crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_NOEAGERFPU; \ -} while (0) #endif /* CONFIG_X86_64 */ static u32 crc32c_intel_le_hw_byte(u32 crc, unsigned char const *data, size_t length) @@ -185,7 +177,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, * use faster PCL version if datasize is large enough to * overcome kernel fpu state save/restore overhead */ - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *crcp = crc_pcl(data, len, *crcp); kernel_fpu_end(); @@ -197,7 +189,7 @@ static int crc32c_pcl_intel_update(struct shash_desc *desc, const u8 *data, static int __crc32c_pcl_intel_finup(u32 *crcp, const u8 *data, unsigned int len, u8 *out) { - if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) { + if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) { kernel_fpu_begin(); *(__le32 *)out = ~cpu_to_le32(crc_pcl(data, len, *crcp)); kernel_fpu_end(); @@ -256,7 +248,6 @@ static int __init crc32c_intel_mod_init(void) alg.update = crc32c_pcl_intel_update; alg.finup = crc32c_pcl_intel_finup; alg.digest = crc32c_pcl_intel_digest; - set_pcl_breakeven_point(); } #endif return crypto_register_shash(&alg); diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h index ec2aedb6f92a..2ff03cca9254 100644 --- a/arch/x86/include/asm/fpu/internal.h +++ b/arch/x86/include/asm/fpu/internal.h @@ -57,11 +57,6 @@ extern u64 fpu__get_supported_xfeatures_mask(void); /* * FPU related CPU feature flag helper routines: */ -static __always_inline __pure bool use_eager_fpu(void) -{ - return true; -} - static __always_inline __pure bool use_xsaveopt(void) { return static_cpu_has(X86_FEATURE_XSAVEOPT); @@ -498,24 +493,6 @@ static inline int fpu_want_lazy_restore(struct fpu *fpu, unsigned int cpu) } -/* - * Wrap lazy FPU TS handling in a 'hw fpregs activation/deactivation' - * idiom, which is then paired with the sw-flag (fpregs_active) later on: - */ - -static inline void __fpregs_activate_hw(void) -{ - if (!use_eager_fpu()) - clts(); -} - -static inline void __fpregs_deactivate_hw(void) -{ - if (!use_eager_fpu()) - stts(); -} - -/* Must be paired with an 'stts' (fpregs_deactivate_hw()) after! */ static inline void __fpregs_deactivate(struct fpu *fpu) { WARN_ON_FPU(!fpu->fpregs_active); @@ -524,7 +501,6 @@ static inline void __fpregs_deactivate(struct fpu *fpu) this_cpu_write(fpu_fpregs_owner_ctx, NULL); } -/* Must be paired with a 'clts' (fpregs_activate_hw()) before! */ static inline void __fpregs_activate(struct fpu *fpu) { WARN_ON_FPU(fpu->fpregs_active); @@ -549,22 +525,17 @@ static inline int fpregs_active(void) } /* - * Encapsulate the CR0.TS handling together with the - * software flag. - * * These generally need preemption protection to work, * do try to avoid using these on their own. */ static inline void fpregs_activate(struct fpu *fpu) { - __fpregs_activate_hw(); __fpregs_activate(fpu); } static inline void fpregs_deactivate(struct fpu *fpu) { __fpregs_deactivate(fpu); - __fpregs_deactivate_hw(); } /* @@ -591,8 +562,7 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) * or if the past 5 consecutive context-switches used math. */ fpu.preload = static_cpu_has(X86_FEATURE_FPU) && - new_fpu->fpstate_active && - (use_eager_fpu() || new_fpu->counter > 5); + new_fpu->fpstate_active; if (old_fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(old_fpu)) @@ -608,8 +578,6 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) new_fpu->counter++; __fpregs_activate(new_fpu); prefetch(&new_fpu->state); - } else { - __fpregs_deactivate_hw(); } } else { old_fpu->counter = 0; diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index 6aa0b519c851..b282364c075c 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -53,27 +53,9 @@ static bool kernel_fpu_disabled(void) return this_cpu_read(in_kernel_fpu); } -/* - * Were we in an interrupt that interrupted kernel mode? - * - * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that - * pair does nothing at all: the thread must not have fpu (so - * that we don't try to save the FPU state), and TS must - * be set (so that the clts/stts pair does nothing that is - * visible in the interrupted kernel thread). - * - * Except for the eagerfpu case when we return true; in the likely case - * the thread has FPU but we are not going to set/clear TS. - */ static bool interrupted_kernel_fpu_idle(void) { - if (kernel_fpu_disabled()) - return false; - - if (use_eager_fpu()) - return true; - - return !current->thread.fpu.fpregs_active && (read_cr0() & X86_CR0_TS); + return !kernel_fpu_disabled(); } /* @@ -121,7 +103,6 @@ void __kernel_fpu_begin(void) copy_fpregs_to_fpstate(fpu); } else { this_cpu_write(fpu_fpregs_owner_ctx, NULL); - __fpregs_activate_hw(); } } EXPORT_SYMBOL(__kernel_fpu_begin); @@ -132,8 +113,6 @@ void __kernel_fpu_end(void) if (fpu->fpregs_active) copy_kernel_to_fpregs(&fpu->state); - else - __fpregs_deactivate_hw(); kernel_fpu_enable(); } @@ -194,10 +173,7 @@ void fpu__save(struct fpu *fpu) preempt_disable(); if (fpu->fpregs_active) { if (!copy_fpregs_to_fpstate(fpu)) { - if (use_eager_fpu()) - copy_kernel_to_fpregs(&fpu->state); - else - fpregs_deactivate(fpu); + copy_kernel_to_fpregs(&fpu->state); } } preempt_enable(); @@ -245,8 +221,7 @@ static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu) * Don't let 'init optimized' areas of the XSAVE area * leak into the child task: */ - if (use_eager_fpu()) - memset(&dst_fpu->state.xsave, 0, xstate_size); + memset(&dst_fpu->state.xsave, 0, xstate_size); /* * Save current FPU registers directly into the child @@ -268,10 +243,7 @@ static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu) if (!copy_fpregs_to_fpstate(dst_fpu)) { memcpy(&src_fpu->state, &dst_fpu->state, xstate_size); - if (use_eager_fpu()) - copy_kernel_to_fpregs(&src_fpu->state); - else - fpregs_deactivate(src_fpu); + copy_kernel_to_fpregs(&src_fpu->state); } preempt_enable(); } @@ -437,7 +409,7 @@ void fpu__clear(struct fpu *fpu) { WARN_ON_FPU(fpu != ¤t->thread.fpu); /* Almost certainly an anomaly */ - if (!use_eager_fpu() || !static_cpu_has(X86_FEATURE_FPU)) { + if (!static_cpu_has(X86_FEATURE_FPU)) { /* FPU state will be reallocated lazily at the first use. */ fpu__drop(fpu); } else { diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c index 3de077116218..9be3e79eb629 100644 --- a/arch/x86/kernel/fpu/signal.c +++ b/arch/x86/kernel/fpu/signal.c @@ -319,11 +319,9 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size) } fpu->fpstate_active = 1; - if (use_eager_fpu()) { - preempt_disable(); - fpu__restore(fpu); - preempt_enable(); - } + preempt_disable(); + fpu__restore(fpu); + preempt_enable(); return err; } else { diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index 7b4ea5e2a68f..338d13d4fd2f 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -16,7 +16,6 @@ #include #include #include -#include /* For use_eager_fpu. Ugh! */ #include #include #include "cpuid.h" @@ -104,8 +103,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu) if (best && (best->eax & (F(XSAVES) | F(XSAVEC)))) best->ebx = xstate_required_size(vcpu->arch.xcr0, true); - if (use_eager_fpu()) - kvm_x86_ops->fpu_activate(vcpu); + kvm_x86_ops->fpu_activate(vcpu); /* * The existing code assumes virtual address is 48-bit in the canonical diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 660d8a0575cf..e6ab034f0bc7 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7319,16 +7319,6 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu); __kernel_fpu_end(); ++vcpu->stat.fpu_reload; - /* - * If using eager FPU mode, or if the guest is a frequent user - * of the FPU, just leave the FPU active for next time. - * Every 255 times fpu_counter rolls over to 0; a guest that uses - * the FPU in bursts will revert to loading it on demand. - */ - if (!use_eager_fpu()) { - if (++vcpu->fpu_counter < 5) - kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu); - } trace_kvm_fpu(0); } From 6e7d7bea15e866838110b7e12dcea9f4ca414b05 Mon Sep 17 00:00:00 2001 From: Rik van Riel Date: Tue, 4 Oct 2016 20:34:34 -0400 Subject: [PATCH 33/48] x86/fpu: Remove struct fpu::counter commit 3913cc3507575273beb165a5e027a081913ed507 upstream. With the lazy FPU code gone, we no longer use the counter field in struct fpu for anything. Get rid it. Signed-off-by: Rik van Riel Reviewed-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Thomas Gleixner Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-6-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/fpu/internal.h | 3 --- arch/x86/include/asm/fpu/types.h | 11 ----------- arch/x86/kernel/fpu/core.c | 3 --- 3 files changed, 17 deletions(-) diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h index 2ff03cca9254..16825dda18dc 100644 --- a/arch/x86/include/asm/fpu/internal.h +++ b/arch/x86/include/asm/fpu/internal.h @@ -575,15 +575,12 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu) /* Don't change CR0.TS if we just switch! */ if (fpu.preload) { - new_fpu->counter++; __fpregs_activate(new_fpu); prefetch(&new_fpu->state); } } else { - old_fpu->counter = 0; old_fpu->last_cpu = -1; if (fpu.preload) { - new_fpu->counter++; if (fpu_want_lazy_restore(new_fpu, cpu)) fpu.preload = 0; else diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h index 1c6f6ac52ad0..dcb85a9ac9b4 100644 --- a/arch/x86/include/asm/fpu/types.h +++ b/arch/x86/include/asm/fpu/types.h @@ -302,17 +302,6 @@ struct fpu { */ unsigned char fpregs_active; - /* - * @counter: - * - * This counter contains the number of consecutive context switches - * during which the FPU stays used. If this is over a threshold, the - * lazy FPU restore logic becomes eager, to save the trap overhead. - * This is an unsigned char so that after 256 iterations the counter - * wraps and the context switch behavior turns lazy again; this is to - * deal with bursty apps that only use the FPU for a short time: - */ - unsigned char counter; /* * @state: * diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index b282364c075c..b322325424bc 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -250,7 +250,6 @@ static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu) int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu) { - dst_fpu->counter = 0; dst_fpu->fpregs_active = 0; dst_fpu->last_cpu = -1; @@ -353,7 +352,6 @@ void fpu__restore(struct fpu *fpu) kernel_fpu_disable(); fpregs_activate(fpu); copy_kernel_to_fpregs(&fpu->state); - fpu->counter++; kernel_fpu_enable(); } EXPORT_SYMBOL_GPL(fpu__restore); @@ -370,7 +368,6 @@ EXPORT_SYMBOL_GPL(fpu__restore); void fpu__drop(struct fpu *fpu) { preempt_disable(); - fpu->counter = 0; if (fpu->fpregs_active) { /* Ignore delayed exceptions from user space */ From 4e7ef8fc8001589339083872f3b6260734cc0e76 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 17 Oct 2016 14:40:11 -0700 Subject: [PATCH 34/48] x86/fpu: Finish excising 'eagerfpu' commit e63650840e8b053aa09ad934877e87e9941ed135 upstream. Now that eagerfpu= is gone, remove it from the docs and some comments. Also sync the changes to tools/. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Quentin Casasnovas Cc: Rik van Riel Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/cf430dd4481d41280e93ac6cf0def1007a67fc8e.1476740397.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Daniel Sangorrin Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 5 ----- arch/x86/include/asm/cpufeatures.h | 1 - arch/x86/include/asm/fpu/types.h | 23 ----------------------- 3 files changed, 29 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3fd53e193b7f..da515c535e62 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -961,11 +961,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. See Documentation/x86/intel_mpx.txt for more information about the feature. - eagerfpu= [X86] - on enable eager fpu restore - off disable eager fpu restore - auto selects the default scheme, which automatically - enables eagerfpu restore for xsaveopt. module.async_probe [KNL] Enable asynchronous probe on this module. diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index dd2269dcbc47..a5fa3195a230 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -104,7 +104,6 @@ #define X86_FEATURE_EXTD_APICID ( 3*32+26) /* has extended APICID (8 bits) */ #define X86_FEATURE_AMD_DCM ( 3*32+27) /* multi-node processor */ #define X86_FEATURE_APERFMPERF ( 3*32+28) /* APERFMPERF */ -/* free, was #define X86_FEATURE_EAGER_FPU ( 3*32+29) * "eagerfpu" Non lazy FPU restore */ #define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h index dcb85a9ac9b4..0d81c7d6fe96 100644 --- a/arch/x86/include/asm/fpu/types.h +++ b/arch/x86/include/asm/fpu/types.h @@ -310,29 +310,6 @@ struct fpu { * the registers in the FPU are more recent than this state * copy. If the task context-switches away then they get * saved here and represent the FPU state. - * - * After context switches there may be a (short) time period - * during which the in-FPU hardware registers are unchanged - * and still perfectly match this state, if the tasks - * scheduled afterwards are not using the FPU. - * - * This is the 'lazy restore' window of optimization, which - * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'. - * - * We detect whether a subsequent task uses the FPU via setting - * CR0::TS to 1, which causes any FPU use to raise a #NM fault. - * - * During this window, if the task gets scheduled again, we - * might be able to skip having to do a restore from this - * memory buffer to the hardware registers - at the cost of - * incurring the overhead of #NM fault traps. - * - * Note that on modern CPUs that support the XSAVEOPT (or other - * optimized XSAVE instructions), we don't use #NM traps anymore, - * as the hardware can track whether FPU registers need saving - * or not. On such CPUs we activate the non-lazy ('eagerfpu') - * logic, which unconditionally saves/restores all FPU state - * across context switches. (if FPU state exists.) */ union fpregs_state state; /* From 2a585d445050f16030b372ada1f4ce076de27833 Mon Sep 17 00:00:00 2001 From: Jozef Balga Date: Tue, 21 Aug 2018 05:01:04 -0400 Subject: [PATCH 35/48] media: af9035: prevent buffer overflow on write [ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ] When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead. Fixes bugzilla issue 64871 [mchehab+samsung@kernel.org: fix a merge conflict and changed the condition to match the patch's comment, e. g. len == 3 could also be valid] Signed-off-by: Jozef Balga Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/media/usb/dvb-usb-v2/af9035.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 6e02a15d39ce..abddb621d9e6 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -389,8 +389,10 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, msg[0].addr == (state->af9033_i2c_addr[1] >> 1)) reg |= 0x100000; - ret = af9035_wr_regs(d, reg, &msg[0].buf[3], - msg[0].len - 3); + ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg, + &msg[0].buf[3], + msg[0].len - 3) + : -EOPNOTSUPP; } else { /* I2C write */ u8 buf[MAX_XFER_SIZE]; From be7e497bf0908851c8744d30c513655b47e386bf Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 8 Aug 2018 18:44:59 +0530 Subject: [PATCH 36/48] clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs [ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ] The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by: Tony Lindgren Signed-off-by: Keerthy Acked-by: Tony Lindgren Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/clocksource/timer-ti-32k.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c index 8518d9dfba5c..73c990867c01 100644 --- a/drivers/clocksource/timer-ti-32k.c +++ b/drivers/clocksource/timer-ti-32k.c @@ -98,6 +98,9 @@ static void __init ti_32k_timer_init(struct device_node *np) return; } + if (!of_machine_is_compatible("ti,am43")) + ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; + ti_32k_timer.counter = ti_32k_timer.base; /* From d200ea29009ebd4eb8e932e364d565c4c1a5b837 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 17 Sep 2018 12:43:34 -0700 Subject: [PATCH 37/48] Input: atakbd - fix Atari keymap [ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ] Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab , keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/atakbd.c | 64 ++++++++++++++------------------- 1 file changed, 26 insertions(+), 38 deletions(-) diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c index f1235831283d..524a72bee55a 100644 --- a/drivers/input/keyboard/atakbd.c +++ b/drivers/input/keyboard/atakbd.c @@ -79,8 +79,7 @@ MODULE_LICENSE("GPL"); */ -static unsigned char atakbd_keycode[0x72] = { /* American layout */ - [0] = KEY_GRAVE, +static unsigned char atakbd_keycode[0x73] = { /* American layout */ [1] = KEY_ESC, [2] = KEY_1, [3] = KEY_2, @@ -121,9 +120,9 @@ static unsigned char atakbd_keycode[0x72] = { /* American layout */ [38] = KEY_L, [39] = KEY_SEMICOLON, [40] = KEY_APOSTROPHE, - [41] = KEY_BACKSLASH, /* FIXME, '#' */ + [41] = KEY_GRAVE, [42] = KEY_LEFTSHIFT, - [43] = KEY_GRAVE, /* FIXME: '~' */ + [43] = KEY_BACKSLASH, [44] = KEY_Z, [45] = KEY_X, [46] = KEY_C, @@ -149,45 +148,34 @@ static unsigned char atakbd_keycode[0x72] = { /* American layout */ [66] = KEY_F8, [67] = KEY_F9, [68] = KEY_F10, - [69] = KEY_ESC, - [70] = KEY_DELETE, - [71] = KEY_KP7, - [72] = KEY_KP8, - [73] = KEY_KP9, + [71] = KEY_HOME, + [72] = KEY_UP, [74] = KEY_KPMINUS, - [75] = KEY_KP4, - [76] = KEY_KP5, - [77] = KEY_KP6, + [75] = KEY_LEFT, + [77] = KEY_RIGHT, [78] = KEY_KPPLUS, - [79] = KEY_KP1, - [80] = KEY_KP2, - [81] = KEY_KP3, - [82] = KEY_KP0, - [83] = KEY_KPDOT, - [90] = KEY_KPLEFTPAREN, - [91] = KEY_KPRIGHTPAREN, - [92] = KEY_KPASTERISK, /* FIXME */ - [93] = KEY_KPASTERISK, - [94] = KEY_KPPLUS, - [95] = KEY_HELP, + [80] = KEY_DOWN, + [82] = KEY_INSERT, + [83] = KEY_DELETE, [96] = KEY_102ND, - [97] = KEY_KPASTERISK, /* FIXME */ - [98] = KEY_KPSLASH, + [97] = KEY_UNDO, + [98] = KEY_HELP, [99] = KEY_KPLEFTPAREN, [100] = KEY_KPRIGHTPAREN, [101] = KEY_KPSLASH, [102] = KEY_KPASTERISK, - [103] = KEY_UP, - [104] = KEY_KPASTERISK, /* FIXME */ - [105] = KEY_LEFT, - [106] = KEY_RIGHT, - [107] = KEY_KPASTERISK, /* FIXME */ - [108] = KEY_DOWN, - [109] = KEY_KPASTERISK, /* FIXME */ - [110] = KEY_KPASTERISK, /* FIXME */ - [111] = KEY_KPASTERISK, /* FIXME */ - [112] = KEY_KPASTERISK, /* FIXME */ - [113] = KEY_KPASTERISK /* FIXME */ + [103] = KEY_KP7, + [104] = KEY_KP8, + [105] = KEY_KP9, + [106] = KEY_KP4, + [107] = KEY_KP5, + [108] = KEY_KP6, + [109] = KEY_KP1, + [110] = KEY_KP2, + [111] = KEY_KP3, + [112] = KEY_KP0, + [113] = KEY_KPDOT, + [114] = KEY_KPENTER, }; static struct input_dev *atakbd_dev; @@ -195,7 +183,7 @@ static struct input_dev *atakbd_dev; static void atakbd_interrupt(unsigned char scancode, char down) { - if (scancode < 0x72) { /* scancodes < 0xf2 are keys */ + if (scancode < 0x73) { /* scancodes < 0xf3 are keys */ // report raw events here? @@ -209,7 +197,7 @@ static void atakbd_interrupt(unsigned char scancode, char down) input_report_key(atakbd_dev, scancode, down); input_sync(atakbd_dev); } - } else /* scancodes >= 0xf2 are mouse data, most likely */ + } else /* scancodes >= 0xf3 are mouse data, most likely */ printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); return; From 6df8eb6ae2295ad0fa830d943585d9eb69785074 Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Mon, 17 Sep 2018 15:27:49 -0700 Subject: [PATCH 38/48] Input: atakbd - fix Atari CapsLock behaviour [ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ] The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/atakbd.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c index 524a72bee55a..fdeda0b0fbd6 100644 --- a/drivers/input/keyboard/atakbd.c +++ b/drivers/input/keyboard/atakbd.c @@ -189,14 +189,8 @@ static void atakbd_interrupt(unsigned char scancode, char down) scancode = atakbd_keycode[scancode]; - if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */ - input_report_key(atakbd_dev, scancode, 1); - input_report_key(atakbd_dev, scancode, 0); - input_sync(atakbd_dev); - } else { - input_report_key(atakbd_dev, scancode, down); - input_sync(atakbd_dev); - } + input_report_key(atakbd_dev, scancode, down); + input_sync(atakbd_dev); } else /* scancodes >= 0xf3 are mouse data, most likely */ printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); From 0d02fdd080d2435101f09d02e843eae17606fb59 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 21 Sep 2018 02:44:12 -0700 Subject: [PATCH 39/48] net/mlx4: Use cpumask_available for eq->affinity_mask [ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ] Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/mellanox/mlx4/eq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index ff77b8b608bd..7417605c3cf6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -228,7 +228,8 @@ static void mlx4_set_eq_affinity_hint(struct mlx4_priv *priv, int vec) struct mlx4_dev *dev = &priv->dev; struct mlx4_eq *eq = &priv->eq_table.eq[vec]; - if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) + if (!cpumask_available(eq->affinity_mask) || + cpumask_empty(eq->affinity_mask)) return; hint_err = irq_set_affinity_hint(eq->irq, eq->affinity_mask); From 6939b3b00c124d1b88c3e1c57d1f18e426df2fa3 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 24 Sep 2018 17:27:04 +1000 Subject: [PATCH 40/48] powerpc/tm: Fix userspace r13 corruption [ Upstream commit cf13435b730a502e814c63c84d93db131e563f5f ] When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct. Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13. To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct. Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address. Signed-off-by: Michael Neuling Reviewed-by: Breno Leitao Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/tm.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index b7019b559ddb..cf30c2c36502 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -199,13 +199,20 @@ dont_backup_fp: std r1, PACATMSCRATCH(r13) ld r1, PACAR1(r13) - /* Store the PPR in r11 and reset to decent value */ std r11, GPR11(r1) /* Temporary stash */ + /* + * Store r13 away so we can free up the scratch SPR for the SLB fault + * handler (needed once we start accessing the thread_struct). + */ + GET_SCRATCH0(r11) + std r11, GPR13(r1) + /* Reset MSR RI so we can take SLB faults again */ li r11, MSR_RI mtmsrd r11, 1 + /* Store the PPR in r11 and reset to decent value */ mfspr r11, SPRN_PPR HMT_MEDIUM @@ -234,7 +241,7 @@ dont_backup_fp: ld r4, GPR7(r1) /* user r7 */ ld r5, GPR11(r1) /* user r11 */ ld r6, GPR12(r1) /* user r12 */ - GET_SCRATCH0(8) /* user r13 */ + ld r8, GPR13(r1) /* user r13 */ std r3, GPR1(r7) std r4, GPR7(r7) std r5, GPR11(r7) From 5a51c55493c039e5579d9d87bc7601ae119b6efb Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 25 Sep 2018 19:36:47 +1000 Subject: [PATCH 41/48] powerpc/tm: Avoid possible userspace r1 corruption on reclaim [ Upstream commit 96dc89d526ef77604376f06220e3d2931a0bfd58 ] Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct. In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do. We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is. This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on. Suggested-by: Breno Leitao Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/kernel/tm.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index cf30c2c36502..2d2860711e07 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -201,6 +201,13 @@ dont_backup_fp: std r11, GPR11(r1) /* Temporary stash */ + /* + * Move the saved user r1 to the kernel stack in case PACATMSCRATCH is + * clobbered by an exception once we turn on MSR_RI below. + */ + ld r11, PACATMSCRATCH(r13) + std r11, GPR1(r1) + /* * Store r13 away so we can free up the scratch SPR for the SLB fault * handler (needed once we start accessing the thread_struct). @@ -237,7 +244,7 @@ dont_backup_fp: SAVE_GPR(8, r7) /* user r8 */ SAVE_GPR(9, r7) /* user r9 */ SAVE_GPR(10, r7) /* user r10 */ - ld r3, PACATMSCRATCH(r13) /* user r1 */ + ld r3, GPR1(r1) /* user r1 */ ld r4, GPR7(r1) /* user r7 */ ld r5, GPR11(r1) /* user r11 */ ld r6, GPR12(r1) /* user r12 */ From 466dda64e443101da297bd26e911df8e0aa6576c Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 13 Sep 2018 23:24:28 +0300 Subject: [PATCH 42/48] ARC: build: Get rid of toolchain check commit 615f64458ad890ef94abc879a66d8b27236e733a upstream. This check is very naive: we simply test if GCC invoked without "-mcpu=XXX" has ARC700 define set. In that case we think that GCC was built with "--with-cpu=arc700" and has libgcc built for ARC700. Otherwise if ARC700 is not defined we think that everythng was built for ARCv2. But in reality our life is much more interesting. 1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu" it may generate code for any ARC core). 2. libgcc might be built with explicitly specified "--mcpu=YYY" That's exactly what happens in case of multilibbed toolchains: - GCC is configured with default settings - All the libs built for many different CPU flavors I.e. that check gets in the way of usage of multilibbed toolchains. And even non-multilibbed toolchains are affected. OpenEmbedded also builds GCC without "--with-cpu" because each and every target component later is compiled with explicitly set "-mcpu=ZZZ". Acked-by: Rob Herring Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman --- arch/arc/Makefile | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index b9f7306412e5..9d64eacdd2aa 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -18,20 +18,6 @@ cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs -is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0) - -ifdef CONFIG_ISA_ARCOMPACT -ifeq ($(is_700), 0) - $(error Toolchain not configured for ARCompact builds) -endif -endif - -ifdef CONFIG_ISA_ARCV2 -ifeq ($(is_700), 1) - $(error Toolchain not configured for ARCv2 builds) -endif -endif - ifdef CONFIG_ARC_CURR_IN_REG # For a global register defintion, make sure it gets passed to every file # We had a customer reported bug where some code built in kernel was NOT using From 68a318670c663cac76ac359784d2f58d8d19cfc7 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 16 Aug 2017 14:30:10 -0600 Subject: [PATCH 43/48] usb: gadget: serial: fix oops when data rx'd after close commit daa35bd95634a2a2d72d1049c93576a02711cb1a upstream. When the gadget serial device has no associated TTY, do not pass any received data into the TTY layer for processing; simply drop it instead. This prevents the TTY layer from calling back into the gadget serial driver, which will then crash in e.g. gs_write_room() due to lack of gadget serial device to TTY association (i.e. a NULL pointer dereference). Signed-off-by: Stephen Warren Signed-off-by: Felipe Balbi Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/u_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index f7771d86ad6c..4ea44f7122ee 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -518,7 +518,7 @@ static void gs_rx_push(unsigned long _port) } /* push data to (open) tty */ - if (req->actual) { + if (req->actual && tty) { char *packet = req->buf; unsigned size = req->actual; unsigned n; From f91b8b1fd69c57764ffd404e33f565aa75357a1e Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Mon, 14 Dec 2015 16:01:57 -0800 Subject: [PATCH 44/48] Drivers: hv: utils: Invoke the poll function after handshake commit 2d0c3b5ad739697a68dc8a444f5b9f4817cf8f8f upstream. When the handshake with daemon is complete, we should poll the channel since during the handshake, we will not be processing any messages. This is a potential bug if the host is waiting for a response from the guest. I would like to thank Dexuan for pointing this out. Signed-off-by: K. Y. Srinivasan Signed-off-by: Dexuan Cui Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 2 +- drivers/hv/hv_snapshot.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index ce4d3a935491..b97ef3e094fd 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -155,7 +155,7 @@ static int kvp_handle_handshake(struct hv_kvp_msg *msg) pr_debug("KVP: userspace daemon ver. %d registered\n", KVP_OP_REGISTER); kvp_register(dm_reg_value); - kvp_transaction.state = HVUTIL_READY; + hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper); return 0; } diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c index faad79ae318a..c5fb249e34cc 100644 --- a/drivers/hv/hv_snapshot.c +++ b/drivers/hv/hv_snapshot.c @@ -114,7 +114,7 @@ static int vss_handle_handshake(struct hv_vss_msg *vss_msg) default: return -EINVAL; } - vss_transaction.state = HVUTIL_READY; + hv_poll_channel(vss_transaction.recv_channel, vss_poll_wrapper); pr_debug("VSS: userspace daemon ver. %d registered\n", dm_reg_value); return 0; } From eaee7976cf2af79c294ab41d651c0e52488ca868 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 26 Feb 2016 15:13:19 -0800 Subject: [PATCH 45/48] Drivers: hv: util: Pass the channel information during the init call commit b9830d120cbe155863399f25eaef6aa8353e767f upstream. Pass the channel information to the util drivers that need to defer reading the channel while they are processing a request. This would address the following issue reported by Vitaly: Commit 3cace4a61610 ("Drivers: hv: utils: run polling callback always in interrupt context") removed direct *_transaction.state = HVUTIL_READY assignments from *_handle_handshake() functions introducing the following race: if a userspace daemon connects before we get first non-negotiation request from the server hv_poll_channel() won't set transaction state to HVUTIL_READY as (!channel) condition will fail, we set it to non-NULL on the first real request from the server. Signed-off-by: K. Y. Srinivasan Reported-by: Vitaly Kuznetsov Signed-off-by: Dexuan Cui Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_fcopy.c | 2 +- drivers/hv/hv_kvp.c | 2 +- drivers/hv/hv_snapshot.c | 2 +- drivers/hv/hv_util.c | 1 + include/linux/hyperv.h | 1 + 5 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/hv/hv_fcopy.c b/drivers/hv/hv_fcopy.c index 12dcbd8226f2..2cce48d9e903 100644 --- a/drivers/hv/hv_fcopy.c +++ b/drivers/hv/hv_fcopy.c @@ -256,7 +256,6 @@ void hv_fcopy_onchannelcallback(void *context) */ fcopy_transaction.recv_len = recvlen; - fcopy_transaction.recv_channel = channel; fcopy_transaction.recv_req_id = requestid; fcopy_transaction.fcopy_msg = fcopy_msg; @@ -323,6 +322,7 @@ static void fcopy_on_reset(void) int hv_fcopy_init(struct hv_util_service *srv) { recv_buffer = srv->recv_buffer; + fcopy_transaction.recv_channel = srv->channel; init_completion(&release_event); /* diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index b97ef3e094fd..cd3fb0151e8a 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -640,7 +640,6 @@ void hv_kvp_onchannelcallback(void *context) */ kvp_transaction.recv_len = recvlen; - kvp_transaction.recv_channel = channel; kvp_transaction.recv_req_id = requestid; kvp_transaction.kvp_msg = kvp_msg; @@ -690,6 +689,7 @@ int hv_kvp_init(struct hv_util_service *srv) { recv_buffer = srv->recv_buffer; + kvp_transaction.recv_channel = srv->channel; init_completion(&release_event); /* diff --git a/drivers/hv/hv_snapshot.c b/drivers/hv/hv_snapshot.c index c5fb249e34cc..b0feddb17170 100644 --- a/drivers/hv/hv_snapshot.c +++ b/drivers/hv/hv_snapshot.c @@ -264,7 +264,6 @@ void hv_vss_onchannelcallback(void *context) */ vss_transaction.recv_len = recvlen; - vss_transaction.recv_channel = channel; vss_transaction.recv_req_id = requestid; vss_transaction.msg = (struct hv_vss_msg *)vss_msg; @@ -340,6 +339,7 @@ hv_vss_init(struct hv_util_service *srv) return -ENOTSUPP; } recv_buffer = srv->recv_buffer; + vss_transaction.recv_channel = srv->channel; /* * When this driver loads, the user level daemon that diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c index 41f5896224bd..9dc63725363d 100644 --- a/drivers/hv/hv_util.c +++ b/drivers/hv/hv_util.c @@ -326,6 +326,7 @@ static int util_probe(struct hv_device *dev, srv->recv_buffer = kmalloc(PAGE_SIZE * 4, GFP_KERNEL); if (!srv->recv_buffer) return -ENOMEM; + srv->channel = dev->channel; if (srv->util_init) { ret = srv->util_init(srv); if (ret) { diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index ae6a711dcd1d..281bb007f725 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1179,6 +1179,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, struct hv_util_service { u8 *recv_buffer; + void *channel; void (*util_cb)(void *); int (*util_init)(struct hv_util_service *); void (*util_deinit)(void); From 43fea648af714b0578f20bfadfec18858e67430d Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 30 Apr 2016 19:21:33 -0700 Subject: [PATCH 46/48] Drivers: hv: kvp: fix IP Failover commit 4dbfc2e68004c60edab7e8fd26784383dd3ee9bc upstream. Hyper-V VMs can be replicated to another hosts and there is a feature to set different IP for replicas, it is called 'Failover TCP/IP'. When such guest starts Hyper-V host sends it KVP_OP_SET_IP_INFO message as soon as we finish negotiation procedure. The problem is that it can happen (and it actually happens) before userspace daemon connects and we reply with HV_E_FAIL to the message. As there are no repetitions we fail to set the requested IP. Solve the issue by postponing our reply to the negotiation message till userspace daemon is connected. We can't wait too long as there is a host-side timeout (cca. 75 seconds) and if we fail to reply in this time frame the whole KVP service will become inactive. The solution is not ideal - if it takes userspace daemon more than 60 seconds to connect IP Failover will still fail but I don't see a solution with our current separation between kernel and userspace parts. Other two modules (VSS and FCOPY) don't require such delay, leave them untouched. Signed-off-by: Vitaly Kuznetsov Signed-off-by: K. Y. Srinivasan Signed-off-by: Dexuan Cui Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 31 +++++++++++++++++++++++++++++++ drivers/hv/hyperv_vmbus.h | 5 +++++ 2 files changed, 36 insertions(+) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index cd3fb0151e8a..ff0a42618b50 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -78,9 +78,11 @@ static void kvp_send_key(struct work_struct *dummy); static void kvp_respond_to_host(struct hv_kvp_msg *msg, int error); static void kvp_timeout_func(struct work_struct *dummy); +static void kvp_host_handshake_func(struct work_struct *dummy); static void kvp_register(int); static DECLARE_DELAYED_WORK(kvp_timeout_work, kvp_timeout_func); +static DECLARE_DELAYED_WORK(kvp_host_handshake_work, kvp_host_handshake_func); static DECLARE_WORK(kvp_sendkey_work, kvp_send_key); static const char kvp_devname[] = "vmbus/hv_kvp"; @@ -131,6 +133,11 @@ static void kvp_timeout_func(struct work_struct *dummy) hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper); } +static void kvp_host_handshake_func(struct work_struct *dummy) +{ + hv_poll_channel(kvp_transaction.recv_channel, hv_kvp_onchannelcallback); +} + static int kvp_handle_handshake(struct hv_kvp_msg *msg) { switch (msg->kvp_hdr.operation) { @@ -155,6 +162,12 @@ static int kvp_handle_handshake(struct hv_kvp_msg *msg) pr_debug("KVP: userspace daemon ver. %d registered\n", KVP_OP_REGISTER); kvp_register(dm_reg_value); + + /* + * If we're still negotiating with the host cancel the timeout + * work to not poll the channel twice. + */ + cancel_delayed_work_sync(&kvp_host_handshake_work); hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper); return 0; @@ -595,7 +608,22 @@ void hv_kvp_onchannelcallback(void *context) struct icmsg_negotiate *negop = NULL; int util_fw_version; int kvp_srv_version; + static enum {NEGO_NOT_STARTED, + NEGO_IN_PROGRESS, + NEGO_FINISHED} host_negotiatied = NEGO_NOT_STARTED; + if (host_negotiatied == NEGO_NOT_STARTED && + kvp_transaction.state < HVUTIL_READY) { + /* + * If userspace daemon is not connected and host is asking + * us to negotiate we need to delay to not lose messages. + * This is important for Failover IP setting. + */ + host_negotiatied = NEGO_IN_PROGRESS; + schedule_delayed_work(&kvp_host_handshake_work, + HV_UTIL_NEGO_TIMEOUT * HZ); + return; + } if (kvp_transaction.state > HVUTIL_READY) return; @@ -673,6 +701,8 @@ void hv_kvp_onchannelcallback(void *context) vmbus_sendpacket(channel, recv_buffer, recvlen, requestid, VM_PKT_DATA_INBAND, 0); + + host_negotiatied = NEGO_FINISHED; } } @@ -711,6 +741,7 @@ hv_kvp_init(struct hv_util_service *srv) void hv_kvp_deinit(void) { kvp_transaction.state = HVUTIL_DEVICE_DYING; + cancel_delayed_work_sync(&kvp_host_handshake_work); cancel_delayed_work_sync(&kvp_timeout_work); cancel_work_sync(&kvp_sendkey_work); hvutil_transport_destroy(hvt); diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index 75e383e6d03d..15e06493c53a 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -35,6 +35,11 @@ */ #define HV_UTIL_TIMEOUT 30 +/* + * Timeout for guest-host handshake for services. + */ +#define HV_UTIL_NEGO_TIMEOUT 60 + /* * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent * is set by CPUID(HVCPUID_VERSION_FEATURES). From e34c69f2094a07b0565feb444dff58a53ccf0958 Mon Sep 17 00:00:00 2001 From: Long Li Date: Sun, 30 Apr 2017 16:21:19 -0700 Subject: [PATCH 47/48] HV: properly delay KVP packets when negotiation is in progress commit a3ade8cc474d848676278660e65f5af1e9e094d9 upstream. The host may send multiple negotiation packets (due to timeout) before the KVP user-mode daemon is connected. KVP user-mode daemon is connected. We need to defer processing those packets until the daemon is negotiated and connected. It's okay for guest to respond to all negotiation packets. In addition, the host may send multiple staged KVP requests as soon as negotiation is done. We need to properly process those packets using one tasklet for exclusive access to ring buffer. This patch is based on the work of Nick Meier . The above is the original changelog of a3ade8cc474d ("HV: properly delay KVP packets when negotiation is in progress" Here I re-worked the original patch because the mainline version can't work for the linux-4.4.y branch, on which channel->callback_event doesn't exist yet. In the mainline, channel->callback_event was added by: 631e63a9f346 ("vmbus: change to per channel tasklet"). Here we don't want to backport it to v4.4, as it requires extra supporting changes and fixes, which are unnecessary as to the KVP bug we're trying to resolve. NOTE: before this patch is used, we should cherry-pick the other related 3 patches from the mainline first: The background of this backport request is that: recently Wang Jian reported some KVP issues: https://github.com/LIS/lis-next/issues/593: e.g. the /var/lib/hyperv/.kvp_pool_* files can not be updated, and sometimes if the hv_kvp_daemon doesn't timely start, the host may not be able to query the VM's IP address via KVP. Reported-by: Wang Jian Tested-by: Wang Jian Signed-off-by: Dexuan Cui Signed-off-by: Long Li Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/hv_kvp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c index ff0a42618b50..1771a968c3f2 100644 --- a/drivers/hv/hv_kvp.c +++ b/drivers/hv/hv_kvp.c @@ -612,21 +612,22 @@ void hv_kvp_onchannelcallback(void *context) NEGO_IN_PROGRESS, NEGO_FINISHED} host_negotiatied = NEGO_NOT_STARTED; - if (host_negotiatied == NEGO_NOT_STARTED && - kvp_transaction.state < HVUTIL_READY) { + if (kvp_transaction.state < HVUTIL_READY) { /* * If userspace daemon is not connected and host is asking * us to negotiate we need to delay to not lose messages. * This is important for Failover IP setting. */ - host_negotiatied = NEGO_IN_PROGRESS; - schedule_delayed_work(&kvp_host_handshake_work, + if (host_negotiatied == NEGO_NOT_STARTED) { + host_negotiatied = NEGO_IN_PROGRESS; + schedule_delayed_work(&kvp_host_handshake_work, HV_UTIL_NEGO_TIMEOUT * HZ); + } return; } if (kvp_transaction.state > HVUTIL_READY) return; - +recheck: vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 4, &recvlen, &requestid); @@ -703,6 +704,8 @@ void hv_kvp_onchannelcallback(void *context) VM_PKT_DATA_INBAND, 0); host_negotiatied = NEGO_FINISHED; + + goto recheck; } } From 24c2342b8e51ab3185e68470709904150a1e3ee0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 20 Oct 2018 09:52:38 +0200 Subject: [PATCH 48/48] Linux 4.4.162 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 57e4ff1a8b96..00ff2dd68ff1 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 161 +SUBLEVEL = 162 EXTRAVERSION = NAME = Blurry Fish Butt