Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Signed-off-by: Steve French <sfrench@us.ibm.com>

Documentation/fujitsu/frv/kernel-ABI.txt

@@ -0,0 +1,234 @@
+				 =================================
+				 INTERNAL KERNEL ABI FOR FR-V ARCH
+				 =================================
+
+The internal FRV kernel ABI is not quite the same as the userspace ABI. A number of the registers
+are used for special purposed, and the ABI is not consistent between modules vs core, and MMU vs
+no-MMU.
+
+This partly stems from the fact that FRV CPUs do not have a separate supervisor stack pointer, and
+most of them do not have any scratch registers, thus requiring at least one general purpose
+register to be clobbered in such an event. Also, within the kernel core, it is possible to simply
+jump or call directly between functions using a relative offset. This cannot be extended to modules
+for the displacement is likely to be too far. Thus in modules the address of a function to call
+must be calculated in a register and then used, requiring two extra instructions.
+
+This document has the following sections:
+
+ (*) System call register ABI
+ (*) CPU operating modes
+ (*) Internal kernel-mode register ABI
+ (*) Internal debug-mode register ABI
+ (*) Virtual interrupt handling
+
+
+========================
+SYSTEM CALL REGISTER ABI
+========================
+
+When a system call is made, the following registers are effective:
+
+	REGISTERS	CALL			RETURN
+	===============	=======================	=======================
+	GR7		System call number	Preserved
+	GR8		Syscall arg #1		Return value
+	GR9-GR13	Syscall arg #2-6	Preserved
+
+
+===================
+CPU OPERATING MODES
+===================
+
+The FR-V CPU has three basic operating modes. In order of increasing capability:
+
+  (1) User mode.
+
+      Basic userspace running mode.
+
+  (2) Kernel mode.
+
+      Normal kernel mode. There are many additional control registers available that may be
+      accessed in this mode, in addition to all the stuff available to user mode. This has two
+      submodes:
+
+      (a) Exceptions enabled (PSR.T == 1).
+
+      	  Exceptions will invoke the appropriate normal kernel mode handler. On entry to the
+      	  handler, the PSR.T bit will be cleared.
+
+      (b) Exceptions disabled (PSR.T == 0).
+
+      	  No exceptions or interrupts may happen. Any mandatory exceptions will cause the CPU to
+      	  halt unless the CPU is told to jump into debug mode instead.
+
+  (3) Debug mode.
+
+      No exceptions may happen in this mode. Memory protection and management exceptions will be
+      flagged for later consideration, but the exception handler won't be invoked. Debugging traps
+      such as hardware breakpoints and watchpoints will be ignored. This mode is entered only by
+      debugging events obtained from the other two modes.
+
+      All kernel mode registers may be accessed, plus a few extra debugging specific registers.
+
+
+=================================
+INTERNAL KERNEL-MODE REGISTER ABI
+=================================
+
+There are a number of permanent register assignments that are set up by entry.S in the exception
+prologue. Note that there is a complete set of exception prologues for each of user->kernel
+transition and kernel->kernel transition. There are also user->debug and kernel->debug mode
+transition prologues.
+
+
+	REGISTER	FLAVOUR	USE
+	===============	=======	====================================================
+	GR1			Supervisor stack pointer
+	GR15			Current thread info pointer
+	GR16			GP-Rel base register for small data
+	GR28			Current exception frame pointer (__frame)
+	GR29			Current task pointer (current)
+	GR30			Destroyed by kernel mode entry
+	GR31		NOMMU	Destroyed by debug mode entry
+	GR31		MMU	Destroyed by TLB miss kernel mode entry
+	CCR.ICC2		Virtual interrupt disablement tracking
+	CCCR.CC3		Cleared by exception prologue (atomic op emulation)
+	SCR0		MMU	See mmu-layout.txt.
+	SCR1		MMU	See mmu-layout.txt.
+	SCR2		MMU	Save for EAR0 (destroyed by icache insns in debug mode)
+	SCR3		MMU	Save for GR31 during debug exceptions
+	DAMR/IAMR	NOMMU	Fixed memory protection layout.
+	DAMR/IAMR	MMU	See mmu-layout.txt.
+
+
+Certain registers are also used or modified across function calls:
+
+	REGISTER	CALL				RETURN
+	===============	===============================	===============================
+	GR0		Fixed Zero			-
+	GR2		Function call frame pointer
+	GR3		Special				Preserved
+	GR3-GR7		-				Clobbered
+	GR8		Function call arg #1		Return value (or clobbered)
+	GR9		Function call arg #2		Return value MSW (or clobbered)
+	GR10-GR13	Function call arg #3-#6		Clobbered
+	GR14		-				Clobbered
+	GR15-GR16	Special				Preserved
+	GR17-GR27	-				Preserved
+	GR28-GR31	Special				Only accessed explicitly
+	LR		Return address after CALL	Clobbered
+	CCR/CCCR	-				Mostly Clobbered
+
+
+================================
+INTERNAL DEBUG-MODE REGISTER ABI
+================================
+
+This is the same as the kernel-mode register ABI for functions calls. The difference is that in
+debug-mode there's a different stack and a different exception frame. Almost all the global
+registers from kernel-mode (including the stack pointer) may be changed.
+
+	REGISTER	FLAVOUR	USE
+	===============	=======	====================================================
+	GR1			Debug stack pointer
+	GR16			GP-Rel base register for small data
+	GR31			Current debug exception frame pointer (__debug_frame)
+	SCR3		MMU	Saved value of GR31
+
+
+Note that debug mode is able to interfere with the kernel's emulated atomic ops, so it must be
+exceedingly careful not to do any that would interact with the main kernel in this regard. Hence
+the debug mode code (gdbstub) is almost completely self-contained. The only external code used is
+the sprintf family of functions.
+
+Futhermore, break.S is so complicated because single-step mode does not switch off on entry to an
+exception. That means unless manually disabled, single-stepping will blithely go on stepping into
+things like interrupts. See gdbstub.txt for more information.
+
+
+==========================
+VIRTUAL INTERRUPT HANDLING
+==========================
+
+Because accesses to the PSR is so slow, and to disable interrupts we have to access it twice (once
+to read and once to write), we don't actually disable interrupts at all if we don't have to. What
+we do instead is use the ICC2 condition code flags to note virtual disablement, such that if we
+then do take an interrupt, we note the flag, really disable interrupts, set another flag and resume
+execution at the point the interrupt happened. Setting condition flags as a side effect of an
+arithmetic or logical instruction is really fast. This use of the ICC2 only occurs within the
+kernel - it does not affect userspace.
+
+The flags we use are:
+
+ (*) CCR.ICC2.Z [Zero flag]
+
+     Set to virtually disable interrupts, clear when interrupts are virtually enabled. Can be
+     modified by logical instructions without affecting the Carry flag.
+
+ (*) CCR.ICC2.C [Carry flag]
+
+     Clear to indicate hardware interrupts are really disabled, set otherwise.
+
+
+What happens is this:
+
+ (1) Normal kernel-mode operation.
+
+	ICC2.Z is 0, ICC2.C is 1.
+
+ (2) An interrupt occurs. The exception prologue examines ICC2.Z and determines that nothing needs
+     doing. This is done simply with an unlikely BEQ instruction.
+
+ (3) The interrupts are disabled (local_irq_disable)
+
+	ICC2.Z is set to 1.
+
+ (4) If interrupts were then re-enabled (local_irq_enable):
+
+	ICC2.Z would be set to 0.
+
+     A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would be used to trap if
+     interrupts were now virtually enabled, but physically disabled - which they're not, so the
+     trap isn't taken. The kernel would then be back to state (1).
+
+ (5) An interrupt occurs. The exception prologue examines ICC2.Z and determines that the interrupt
+     shouldn't actually have happened. It jumps aside, and there disabled interrupts by setting
+     PSR.PIL to 14 and then it clears ICC2.C.
+
+ (6) If interrupts were then saved and disabled again (local_irq_save):
+
+	ICC2.Z would be shifted into the save variable and masked off (giving a 1).
+
+	ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be unaffected (ie: 0).
+
+ (7) If interrupts were then restored from state (6) (local_irq_restore):
+
+	ICC2.Z would be set to indicate the result of XOR'ing the saved value (ie: 1) with 1, which
+	gives a result of 0 - thus leaving ICC2.Z set.
+
+	ICC2.C would remain unaffected (ie: 0).
+
+     A TIHI #2 instruction would be used to again assay the current state, but this would do
+     nothing as Z==1.
+
+ (8) If interrupts were then enabled (local_irq_enable):
+
+	ICC2.Z would be cleared. ICC2.C would be left unaffected. Both flags would now be 0.
+
+     A TIHI #2 instruction again issued to assay the current state would then trap as both Z==0
+     [interrupts virtually enabled] and C==0 [interrupts really disabled] would then be true.
+
+ (9) The trap #2 handler would simply enable hardware interrupts (set PSR.PIL to 0), set ICC2.C to
+     1 and return.
+
+(10) Immediately upon returning, the pending interrupt would be taken.
+
+(11) The interrupt handler would take the path of actually processing the interrupt (ICC2.Z is
+     clear, BEQ fails as per step (2)).
+
+(12) The interrupt handler would then set ICC2.C to 1 since hardware interrupts are definitely
+     enabled - or else the kernel wouldn't be here.
+
+(13) On return from the interrupt handler, things would be back to state (1).
+
+This trap (#2) is only available in kernel mode. In user mode it will result in SIGILL.

Documentation/hwmon/w83627hf

@@ -36,6 +36,10 @@ Module Parameters
   (default is 1)
   Use 'init=0' to bypass initializing the chip.
   Try this if your computer crashes when you load the module.
+* reset: int
+  (default is 0)
+  The driver used to reset the chip on load, but does no more. Use
+  'reset=1' to restore the old behavior. Report if you need to do this.
 
 Description
 -----------

Documentation/kprobes.txt

@@ -136,17 +136,20 @@ Kprobes, jprobes, and return probes are implemented on the following
 architectures:
 
 - i386
-- x86_64 (AMD-64, E64MT)
+- x86_64 (AMD-64, EM64T)
 - ppc64
-- ia64 (Support for probes on certain instruction types is still in progress.)
+- ia64 (Does not support probes on instruction slot1.)
 - sparc64 (Return probes not yet implemented.)
 
 3. Configuring Kprobes
 
 When configuring the kernel using make menuconfig/xconfig/oldconfig,
-ensure that CONFIG_KPROBES is set to "y".  Under "Kernel hacking",
+ensure that CONFIG_KPROBES is set to "y".  Under "Instrumentation
-look for "Kprobes".  You may have to enable "Kernel debugging"
+Support", look for "Kprobes".
-(CONFIG_DEBUG_KERNEL) before you can enable Kprobes.
+
+So that you can load and unload Kprobes-based instrumentation modules,
+make sure "Loadable module support" (CONFIG_MODULES) and "Module
+unloading" (CONFIG_MODULE_UNLOAD) are set to "y".
 
 You may also want to ensure that CONFIG_KALLSYMS and perhaps even
 CONFIG_KALLSYMS_ALL are set to "y", since kallsyms_lookup_name()
@@ -262,18 +265,18 @@ at any time after the probe has been registered.
 
 5. Kprobes Features and Limitations
 
-As of Linux v2.6.12, Kprobes allows multiple probes at the same
+Kprobes allows multiple probes at the same address.  Currently,
-address.  Currently, however, there cannot be multiple jprobes on
+however, there cannot be multiple jprobes on the same function at
-the same function at the same time.
+the same time.
 
 In general, you can install a probe anywhere in the kernel.
 In particular, you can probe interrupt handlers.  Known exceptions
 are discussed in this section.
 
-For obvious reasons, it's a bad idea to install a probe in
+The register_*probe functions will return -EINVAL if you attempt
-the code that implements Kprobes (mostly kernel/kprobes.c and
+to install a probe in the code that implements Kprobes (mostly
-arch/*/kernel/kprobes.c).  A patch in the v2.6.13 timeframe instructs
+kernel/kprobes.c and arch/*/kernel/kprobes.c, but also functions such
-Kprobes to reject such requests.
+as do_page_fault and notifier_call_chain).
 
 If you install a probe in an inline-able function, Kprobes makes
 no attempt to chase down all inline instances of the function and
@@ -290,18 +293,14 @@ from the accidental ones.  Don't drink and probe.
 
 Kprobes makes no attempt to prevent probe handlers from stepping on
 each other -- e.g., probing printk() and then calling printk() from a
-probe handler.  As of Linux v2.6.12, if a probe handler hits a probe,
+probe handler.  If a probe handler hits a probe, that second probe's
-that second probe's handlers won't be run in that instance.
+handlers won't be run in that instance, and the kprobe.nmissed member
+of the second probe will be incremented.
 
-In Linux v2.6.12 and previous versions, Kprobes' data structures are
+As of Linux v2.6.15-rc1, multiple handlers (or multiple instances of
-protected by a single lock that is held during probe registration and
+the same handler) may run concurrently on different CPUs.
-unregistration and while handlers are run.  Thus, no two handlers
-can run simultaneously.  To improve scalability on SMP systems,
-this restriction will probably be removed soon, in which case
-multiple handlers (or multiple instances of the same handler) may
-run concurrently on different CPUs.  Code your handlers accordingly.
 
-Kprobes does not use semaphores or allocate memory except during
+Kprobes does not use mutexes or allocate memory except during
 registration and unregistration.
 
 Probe handlers are run with preemption disabled.  Depending on the
@@ -316,11 +315,18 @@ address instead of the real return address for kretprobed functions.
 (As far as we can tell, __builtin_return_address() is used only
 for instrumentation and error reporting.)
 
-If the number of times a function is called does not match the
+If the number of times a function is called does not match the number
-number of times it returns, registering a return probe on that
+of times it returns, registering a return probe on that function may
-function may produce undesirable results.  We have the do_exit()
+produce undesirable results.  We have the do_exit() case covered.
-and do_execve() cases covered.  do_fork() is not an issue.  We're
+do_execve() and do_fork() are not an issue.  We're unaware of other
-unaware of other specific cases where this could be a problem.
+specific cases where this could be a problem.
+
+If, upon entry to or exit from a function, the CPU is running on
+a stack other than that of the current task, registering a return
+probe on that function may produce undesirable results.  For this
+reason, Kprobes doesn't support return probes (or kprobes or jprobes)
+on the x86_64 version of __switch_to(); the registration functions
+return -EINVAL.
 
 6. Probe Overhead
 
@@ -347,14 +353,12 @@ k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
 
 7. TODO
 
-a. SystemTap (http://sourceware.org/systemtap): Work in progress
+a. SystemTap (http://sourceware.org/systemtap): Provides a simplified
-to provide a simplified programming interface for probe-based
+programming interface for probe-based instrumentation.  Try it out.
-instrumentation.
+b. Kernel return probes for sparc64.
-b. Improved SMP scalability: Currently, work is in progress to handle
+c. Support for other architectures.
-multiple kprobes in parallel.
+d. User-space probes.
-c. Kernel return probes for sparc64.
+e. Watchpoint probes (which fire on data references).
-d. Support for other architectures.
-e. User-space probes.
 
 8. Kprobes Example
 
@@ -411,8 +415,7 @@ int init_module(void)
 		printk("Couldn't find %s to plant kprobe\n", "do_fork");
 		return -1;
 	}
-	ret = register_kprobe(&kp);
+	if ((ret = register_kprobe(&kp) < 0)) {
-	if (ret < 0) {
 		printk("register_kprobe failed, returned %d\n", ret);
 		return -1;
 	}

Documentation/mips/AU1xxx_IDE.README

@@ -95,11 +95,13 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
 CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
+Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
+the burst support on DBDMA controller.
+
 If the used system need the USB support enable the following kernel configs for
 high IDE to USB throughput.
 
@@ -115,6 +117,8 @@ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
+Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
+disable the burst support on DBDMA controller.
 
 ADD NEW HARD DISC TO WHITE OR BLACK LIST
 ----------------------------------------

Documentation/powerpc/booting-without-of.txt

@@ -44,7 +44,6 @@
                            compiler and the textural representation of
                            the tree that can be "compiled" by dtc.
 
-
    November 21, 2005: Rev 0.5
 			 - Additions/generalizations for 32-bit
 			 - Changed to reflect the new arch/powerpc
@@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
 	};
 
 
+   f) Freescale SOC USB controllers
+
+   The device node for a USB controller that is part of a Freescale
+   SOC is as described in the document "Open Firmware Recommended
+   Practice : Universal Serial Bus" with the following modifications
+   and additions :  
+
+   Required properties :
+    - compatible : Should be "fsl-usb2-mph" for multi port host usb
+      controllers, or "fsl-usb2-dr" for dual role usb controllers
+    - phy_type : For multi port host usb controllers, should be one of
+      "ulpi", or "serial". For dual role usb controllers, should be
+      one of "ulpi", "utmi", "utmi_wide", or "serial".
+    - reg : Offset and length of the register set for the device
+    - port0 : boolean; if defined, indicates port0 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port1" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+    - port1 : boolean; if defined, indicates port1 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+
+   Recommended properties :
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+
+   Example multi port host usb controller device node : 
+	usb@22000 {
+	        device_type = "usb";
+		compatible = "fsl-usb2-mph";
+		reg = <22000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <27 1>;
+		phy_type = "ulpi";
+		port0;
+		port1;
+	};
+
+   Example dual role usb controller device node : 
+	usb@23000 {
+		device_type = "usb";
+		compatible = "fsl-usb2-dr";
+		reg = <23000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <26 1>;
+		phy = "ulpi";
+	};
+
+
    More devices will be defined as this spec matures.
 
 

MAINTAINERS

@@ -2232,7 +2232,23 @@ P:	Martin Schwidefsky
 M:	schwidefsky@de.ibm.com
 M:	linux390@de.ibm.com
 L:	linux-390@vm.marist.edu
-W:	http://oss.software.ibm.com/developerworks/opensource/linux390
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+
+S390 NETWORK DRIVERS
+P:	Frank Pavlic
+M:	fpavlic@de.ibm.com
+M:	linux390@de.ibm.com
+L:	linux-390@vm.marist.edu
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+
+S390 ZFCP DRIVER
+P:	Andreas Herrmann
+M:	aherrman@de.ibm.com
+M:	linux390@de.ibm.com
+L:	linux-390@vm.marist.edu
+W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 
 SAA7146 VIDEO4LINUX-2 DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc3
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*

arch/arm/mach-s3c2410/mach-h1940.c

@@ -46,10 +46,11 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
+
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
 
+#include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
 
 #include <linux/serial_core.h>
@@ -59,7 +60,12 @@
 #include "cpu.h"
 
 static struct map_desc h1940_iodesc[] __initdata = {
-	/* nothing here yet */
+	[0] = {
+		.virtual	= (unsigned long)H1940_LATCH,
+		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
 	}
 };
 
+/* Board control latch control */
+
+static unsigned int latch_state = H1940_LATCH_DEFAULT;
+
+void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	latch_state &= ~clear;
+	latch_state |= set;
+
+	__raw_writel(latch_state, H1940_LATCH);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(h1940_latch_control);
 
 
 /**

arch/arm/mach-s3c2410/s3c2400.h

@@ -0,0 +1,31 @@
+/* arch/arm/mach-s3c2410/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif

arch/frv/Kconfig

@@ -25,6 +25,10 @@ config GENERIC_HARDIRQS
 	bool
 	default n
 
+config TIME_LOW_RES
+	bool
+	default y
+
 mainmenu "Fujitsu FR-V Kernel Configuration"
 
 source "init/Kconfig"

arch/frv/Makefile

@@ -81,7 +81,7 @@ endif
 # - reserve CC3 for use with atomic ops
 # - all the extra registers are dealt with only at context switch time
 CFLAGS		+= -mno-fdpic -mgpr-32 -msoft-float -mno-media
-CFLAGS		+= -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15
+CFLAGS		+= -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2
 AFLAGS		+= -mno-fdpic
 ASFLAGS		+= -mno-fdpic
 

arch/frv/kernel/break.S

@@ -200,12 +200,20 @@ __break_step:
 	movsg		bpcsr,gr2
 	sethi.p		%hi(__entry_kernel_external_interrupt),gr3
 	setlo		%lo(__entry_kernel_external_interrupt),gr3
-	subcc		gr2,gr3,gr0,icc0
+	subcc.p		gr2,gr3,gr0,icc0
+	sethi		%hi(__entry_uspace_external_interrupt),gr3
+	setlo.p		%lo(__entry_uspace_external_interrupt),gr3
 	beq		icc0,#2,__break_step_kernel_external_interrupt
-	sethi.p		%hi(__entry_uspace_external_interrupt),gr3
+	subcc.p		gr2,gr3,gr0,icc0
-	setlo		%lo(__entry_uspace_external_interrupt),gr3
+	sethi		%hi(__entry_kernel_external_interrupt_virtually_disabled),gr3
-	subcc		gr2,gr3,gr0,icc0
+	setlo.p		%lo(__entry_kernel_external_interrupt_virtually_disabled),gr3
 	beq		icc0,#2,__break_step_uspace_external_interrupt
+	subcc.p		gr2,gr3,gr0,icc0
+	sethi		%hi(__entry_kernel_external_interrupt_virtual_reenable),gr3
+	setlo.p		%lo(__entry_kernel_external_interrupt_virtual_reenable),gr3
+	beq		icc0,#2,__break_step_kernel_external_interrupt_virtually_disabled
+	subcc		gr2,gr3,gr0,icc0
+	beq		icc0,#2,__break_step_kernel_external_interrupt_virtual_reenable
 
 	LEDS		0x2007,gr2
 
@@ -254,6 +262,9 @@ __break_step_kernel_softprog_interrupt:
 # step through an external interrupt from kernel mode
 	.globl		__break_step_kernel_external_interrupt
 __break_step_kernel_external_interrupt:
+	# deal with virtual interrupt disablement
+	beq		icc2,#0,__break_step_kernel_external_interrupt_virtually_disabled
+
 	sethi.p		%hi(__entry_kernel_external_interrupt_reentry),gr3
 	setlo		%lo(__entry_kernel_external_interrupt_reentry),gr3
 
@@ -294,6 +305,64 @@ __break_return_as_kernel_prologue:
 #endif
 	rett		#1
 
+# we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled
+# need to really disable interrupts, set flag, fix up and return
+__break_step_kernel_external_interrupt_virtually_disabled:
+	movsg		psr,gr2
+	andi		gr2,#~PSR_PIL,gr2
+	ori		gr2,#PSR_PIL_14,gr2	/* debugging interrupts only */
+	movgs		gr2,psr
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	subcc.p		gr0,gr0,gr0,icc2	/* leave Z set, clear C */
+
+	# exceptions must've been enabled and we must've been in supervisor mode
+	setlos		BPSR_BET|BPSR_BS,gr3
+	movgs		gr3,bpsr
+
+	# return to where the interrupt happened
+	movsg		pcsr,gr2
+	movgs		gr2,bpcsr
+
+	lddi.p		@(gr31,#REG_GR(2)),gr2
+
+	xor		gr31,gr31,gr31
+	movgs		gr0,brr
+#ifdef CONFIG_MMU
+	movsg		scr3,gr31
+#endif
+	rett		#1
+
+# we stepped through into the virtual interrupt reenablement trap
+#
+# we also want to single step anyway, but after fixing up so that we get an event on the
+# instruction after the broken-into exception returns
+	.globl		__break_step_kernel_external_interrupt_virtual_reenable
+__break_step_kernel_external_interrupt_virtual_reenable:
+	movsg		psr,gr2
+	andi		gr2,#~PSR_PIL,gr2
+	movgs		gr2,psr
+
+	ldi		@(gr31,#REG_CCR),gr3
+	movgs		gr3,ccr
+	subicc		gr0,#1,gr0,icc2		/* clear Z, set C */
+
+	# save the adjusted ICC2
+	movsg		ccr,gr3
+	sti		gr3,@(gr31,#REG_CCR)
+
+	# exceptions must've been enabled and we must've been in supervisor mode
+	setlos		BPSR_BET|BPSR_BS,gr3
+	movgs		gr3,bpsr
+
+	# return to where the trap happened
+	movsg		pcsr,gr2
+	movgs		gr2,bpcsr
+
+	# and then process the single step
+	bra		__break_continue
+
 # step through an internal exception from uspace mode
 	.globl		__break_step_uspace_softprog_interrupt
 __break_step_uspace_softprog_interrupt:

arch/frv/kernel/entry-table.S

@@ -116,6 +116,8 @@ __break_kerneltrap_fixup_table:
 	.long		__break_step_uspace_external_interrupt
 	.section .trap.kernel
 	.org		\tbr_tt
+	# deal with virtual interrupt disablement
+	beq		icc2,#0,__entry_kernel_external_interrupt_virtually_disabled
 	bra		__entry_kernel_external_interrupt
 	.section .trap.fixup.kernel
 	.org		\tbr_tt >> 2
@@ -259,25 +261,52 @@ __trap_fixup_kernel_data_tlb_miss:
 	.org		TBR_TT_TRAP0
 	.rept		127
 	bra		__entry_uspace_softprog_interrupt
-	bra		__break_step_uspace_softprog_interrupt
+	.long		0,0,0
-	.long		0,0
 	.endr
 	.org		TBR_TT_BREAK
 	bra		__entry_break
 	.long		0,0,0
 
+	.section	.trap.fixup.user
+	.org		TBR_TT_TRAP0 >> 2
+	.rept		127
+	.long		__break_step_uspace_softprog_interrupt
+	.endr
+	.org		TBR_TT_BREAK >> 2
+	.long		0
+
 	# miscellaneous kernel mode entry points
 	.section	.trap.kernel
 	.org		TBR_TT_TRAP0
-	.rept		127
 	bra		__entry_kernel_softprog_interrupt
-	bra		__break_step_kernel_softprog_interrupt
+	.org		TBR_TT_TRAP1
-	.long		0,0
+	bra		__entry_kernel_softprog_interrupt
+
+	# trap #2 in kernel - reenable interrupts
+	.org		TBR_TT_TRAP2
+	bra		__entry_kernel_external_interrupt_virtual_reenable
+
+	# miscellaneous kernel traps
+	.org		TBR_TT_TRAP3
+	.rept		124
+	bra		__entry_kernel_softprog_interrupt
+	.long		0,0,0
 	.endr
 	.org		TBR_TT_BREAK
 	bra		__entry_break
 	.long		0,0,0
 
+	.section	.trap.fixup.kernel
+	.org		TBR_TT_TRAP0 >> 2
+	.long		__break_step_kernel_softprog_interrupt
+	.long		__break_step_kernel_softprog_interrupt
+	.long		__break_step_kernel_external_interrupt_virtual_reenable
+	.rept		124
+	.long		__break_step_kernel_softprog_interrupt
+	.endr
+	.org		TBR_TT_BREAK >> 2
+	.long		0
+
 	# miscellaneous debug mode entry points
 	.section	.trap.break
 	.org		TBR_TT_BREAK

arch/frv/kernel/entry.S

@@ -141,7 +141,10 @@ __entry_uspace_external_interrupt_reentry:
 
 	movsg		gner0,gr4
 	movsg		gner1,gr5
-	stdi		gr4,@(gr28,#REG_GNER0)
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# interrupts start off fully disabled in the interrupt handler
+	subcc		gr0,gr0,gr0,icc2		/* set Z and clear C */
 
 	# set up kernel global registers
 	sethi.p		%hi(__kernel_current_task),gr5
@@ -193,9 +196,8 @@ __entry_uspace_external_interrupt_reentry:
         .type		__entry_kernel_external_interrupt,@function
 __entry_kernel_external_interrupt:
 	LEDS		0x6210
-
+//	sub		sp,gr15,gr31
-	sub		sp,gr15,gr31
+//	LEDS32
-	LEDS32
 
 	# set up the stack pointer
 	or.p		sp,gr0,gr30
@@ -231,7 +233,10 @@ __entry_kernel_external_interrupt_reentry:
 	stdi		gr24,@(gr28,#REG_GR(24))
 	stdi		gr26,@(gr28,#REG_GR(26))
 	sti		gr29,@(gr28,#REG_GR(29))
-	stdi		gr30,@(gr28,#REG_GR(30))
+	stdi.p		gr30,@(gr28,#REG_GR(30))
+
+	# note virtual interrupts will be fully enabled upon return
+	subicc		gr0,#1,gr0,icc2			/* clear Z, set C */
 
 	movsg		tbr ,gr20
 	movsg		psr ,gr22
@@ -267,7 +272,10 @@ __entry_kernel_external_interrupt_reentry:
 
 	movsg		gner0,gr4
 	movsg		gner1,gr5
-	stdi		gr4,@(gr28,#REG_GNER0)
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# interrupts start off fully disabled in the interrupt handler
+	subcc		gr0,gr0,gr0,icc2			/* set Z and clear C */
 
 	# set the return address
 	sethi.p		%hi(__entry_return_from_kernel_interrupt),gr4
@@ -291,6 +299,45 @@ __entry_kernel_external_interrupt_reentry:
 
 	.size		__entry_kernel_external_interrupt,.-__entry_kernel_external_interrupt
 
+###############################################################################
+#
+# deal with interrupts that were actually virtually disabled
+# - we need to really disable them, flag the fact and return immediately
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+	.balign		L1_CACHE_BYTES
+	.globl		__entry_kernel_external_interrupt_virtually_disabled
+	.type		__entry_kernel_external_interrupt_virtually_disabled,@function
+__entry_kernel_external_interrupt_virtually_disabled:
+	movsg		psr,gr30
+	andi		gr30,#~PSR_PIL,gr30
+	ori		gr30,#PSR_PIL_14,gr30		; debugging interrupts only
+	movgs		gr30,psr
+	subcc		gr0,gr0,gr0,icc2		; leave Z set, clear C
+	rett		#0
+
+	.size		__entry_kernel_external_interrupt_virtually_disabled,.-__entry_kernel_external_interrupt_virtually_disabled
+
+###############################################################################
+#
+# deal with re-enablement of interrupts that were pending when virtually re-enabled
+# - set ICC2.C, re-enable the real interrupts and return
+# - we can clear ICC2.Z because we shouldn't be here if it's not 0 [due to TIHI]
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+	.balign		L1_CACHE_BYTES
+	.globl		__entry_kernel_external_interrupt_virtual_reenable
+	.type		__entry_kernel_external_interrupt_virtual_reenable,@function
+__entry_kernel_external_interrupt_virtual_reenable:
+	movsg		psr,gr30
+	andi		gr30,#~PSR_PIL,gr30		; re-enable interrupts
+	movgs		gr30,psr
+	subicc		gr0,#1,gr0,icc2			; clear Z, set C
+	rett		#0
+
+	.size		__entry_kernel_external_interrupt_virtual_reenable,.-__entry_kernel_external_interrupt_virtual_reenable
 
 ###############################################################################
 #
@@ -335,6 +382,7 @@ __entry_uspace_softprog_interrupt_reentry:
 
 	sethi.p		%hi(__entry_return_from_user_exception),gr23
 	setlo		%lo(__entry_return_from_user_exception),gr23
+
 	bra		__entry_common
 
 	.size		__entry_uspace_softprog_interrupt,.-__entry_uspace_softprog_interrupt
@@ -495,7 +543,10 @@ __entry_common:
 
 	movsg		gner0,gr4
 	movsg		gner1,gr5
-	stdi		gr4,@(gr28,#REG_GNER0)
+	stdi.p		gr4,@(gr28,#REG_GNER0)
+
+	# set up virtual interrupt disablement
+	subicc		gr0,#1,gr0,icc2			/* clear Z flag, set C flag */
 
 	# set up kernel global registers
 	sethi.p		%hi(__kernel_current_task),gr5
@@ -1418,11 +1469,27 @@ sys_call_table:
 	.long sys_add_key
 	.long sys_request_key
 	.long sys_keyctl
-	.long sys_ni_syscall // sys_vperfctr_open
+	.long sys_ioprio_set
-	.long sys_ni_syscall // sys_vperfctr_control	/* 290 */
+	.long sys_ioprio_get		/* 290 */
-	.long sys_ni_syscall // sys_vperfctr_unlink
+	.long sys_inotify_init
-	.long sys_ni_syscall // sys_vperfctr_iresume
+	.long sys_inotify_add_watch
-	.long sys_ni_syscall // sys_vperfctr_read
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_newfstatat		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
 
 
 syscall_table_size = (. - sys_call_table)

arch/frv/kernel/head.S

@@ -513,6 +513,9 @@ __head_mmu_enabled:
 	movgs		gr0,ccr
 	movgs		gr0,cccr
 
+	# initialise the virtual interrupt handling
+	subcc		gr0,gr0,gr0,icc2		/* set Z, clear C */
+
 #ifdef CONFIG_MMU
 	movgs		gr3,scr2
 	movgs		gr3,scr3

arch/frv/kernel/irq.c

@@ -287,18 +287,11 @@ asmlinkage void do_IRQ(void)
 	struct irq_source *source;
 	int level, cpu;
 
+	irq_enter();
+
 	level = (__frame->tbr >> 4) & 0xf;
 	cpu = smp_processor_id();
 
-#if 0
-	{
-		static u32 irqcount;
-		*(volatile u32 *) 0xe1200004 = ~((irqcount++ << 8) | level);
-		*(volatile u16 *) 0xffc00100 = (u16) ~0x9999;
-		mb();
-	}
-#endif
-
 	if ((unsigned long) __frame - (unsigned long) (current + 1) < 512)
 		BUG();
 
@@ -308,40 +301,12 @@ asmlinkage void do_IRQ(void)
 
 	kstat_this_cpu.irqs[level]++;
 
-	irq_enter();
-
 	for (source = frv_irq_levels[level].sources; source; source = source->next)
 		source->doirq(source);
 
-	irq_exit();
-
 	__clr_MASK(level);
 
-	/* only process softirqs if we didn't interrupt another interrupt handler */
+	irq_exit();
-	if ((__frame->psr & PSR_PIL) == PSR_PIL_0)
-		if (local_softirq_pending())
-			do_softirq();
-
-#ifdef CONFIG_PREEMPT
-	local_irq_disable();
-	while (--current->preempt_count == 0) {
-		if (!(__frame->psr & PSR_S) ||
-		    current->need_resched == 0 ||
-		    in_interrupt())
-			break;
-		current->preempt_count++;
-		local_irq_enable();
-		preempt_schedule();
-		local_irq_disable();
-	}
-#endif
-
-#if 0
-	{
-		*(volatile u16 *) 0xffc00100 = (u16) ~0x6666;
-		mb();
-	}
-#endif
 
 } /* end do_IRQ() */
 

arch/frv/mm/kmap.c

@@ -43,15 +43,6 @@ void iounmap(void *addr)
 {
 }
 
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
 /*
  * Set new cache mode for some kernel address space.
  * The caller must push data for that range itself, if such data may already

arch/h8300/Kconfig

@@ -33,6 +33,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config TIME_LOW_RES
+	bool
+	default y
+
 config ISA
 	bool
 	default y

arch/h8300/Kconfig.cpu

@@ -169,7 +169,7 @@ endif
 
 config CPU_H8300H
 	bool
-	depends on (H8002 || H83007 || H83048 || H83068)
+	depends on (H83002 || H83007 || H83048 || H83068)
 	default y
 
 config CPU_H8S

arch/i386/boot/.gitignore

@@ -0,0 +1,3 @@
+bootsect
+bzImage
+setup

arch/i386/boot/tools/.gitignore

@@ -0,0 +1 @@
+build

arch/i386/kernel/.gitignore

@@ -0,0 +1 @@
+vsyscall.lds

arch/i386/kernel/head.S

@@ -398,7 +398,11 @@ ignore_int:
 	pushl 32(%esp)
 	pushl 40(%esp)
 	pushl $int_msg
+#ifdef CONFIG_EARLY_PRINTK
+	call early_printk
+#else
 	call printk
+#endif
 	addl $(5*4),%esp
 	popl %ds
 	popl %es

arch/i386/kernel/syscall_table.S

@@ -299,7 +299,7 @@ ENTRY(sys_call_table)
 	.long sys_mknodat
 	.long sys_fchownat
 	.long sys_futimesat
-	.long sys_newfstatat		/* 300 */
+	.long sys_fstatat64		/* 300 */
 	.long sys_unlinkat
 	.long sys_renameat
 	.long sys_linkat

arch/i386/kernel/timers/timer_tsc.c

@@ -282,6 +282,10 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	if (val != CPUFREQ_RESUMECHANGE)
 		write_seqlock_irq(&xtime_lock);
 	if (!ref_freq) {
+		if (!freq->old){
+			ref_freq = freq->new;
+			goto end;
+		}
 		ref_freq = freq->old;
 		loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
 #ifndef CONFIG_SMP
@@ -307,6 +311,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 #endif
 	}
 
+end:
 	if (val != CPUFREQ_RESUMECHANGE)
 		write_sequnlock_irq(&xtime_lock);
 

arch/i386/kernel/vsyscall-sysenter.S

@@ -7,6 +7,21 @@
  *    for details.
  */
 
+/*
+ * The caller puts arg2 in %ecx, which gets pushed. The kernel will use
+ * %ecx itself for arg2. The pushing is because the sysexit instruction
+ * (found in entry.S) requires that we clobber %ecx with the desired %esp.
+ * User code might expect that %ecx is unclobbered though, as it would be
+ * for returning via the iret instruction, so we must push and pop.
+ *
+ * The caller puts arg3 in %edx, which the sysexit instruction requires
+ * for %eip. Thus, exactly as for arg2, we must push and pop.
+ *
+ * Arg6 is different. The caller puts arg6 in %ebp. Since the sysenter
+ * instruction clobbers %esp, the user's %esp won't even survive entry
+ * into the kernel. We store %esp in %ebp. Code in entry.S must fetch
+ * arg6 from the stack.
+ */
 	.text
 	.globl __kernel_vsyscall
 	.type __kernel_vsyscall,@function

arch/i386/oprofile/backtrace.c

@@ -20,7 +20,20 @@ struct frame_head {
 } __attribute__((packed));
 
 static struct frame_head *
-dump_backtrace(struct frame_head * head)
+dump_kernel_backtrace(struct frame_head * head)
+{
+	oprofile_add_trace(head->ret);
+
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (head >= head->ebp)
+		return NULL;
+
+	return head->ebp;
+}
+
+static struct frame_head *
+dump_user_backtrace(struct frame_head * head)
 {
 	struct frame_head bufhead[2];
 
@@ -105,10 +118,10 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 	if (!user_mode_vm(regs)) {
 		while (depth-- && valid_kernel_stack(head, regs))
-			head = dump_backtrace(head);
+			head = dump_kernel_backtrace(head);
 		return;
 	}
 
 	while (depth-- && head)
-		head = dump_backtrace(head);
+		head = dump_user_backtrace(head);
 }

arch/m68k/Kconfig

@@ -21,6 +21,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config TIME_LOW_RES
+	bool
+	default y
+
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 	depends on Q40 || (BROKEN && SUN3X)

arch/m68k/fpsp040/bindec.S

@@ -131,9 +131,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |BINDEC    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/binstr.S

@@ -60,9 +60,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |BINSTR    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/bugfix.S

@@ -152,9 +152,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |BUGFIX    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/decbin.S

@@ -69,9 +69,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |DECBIN    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/do_func.S

@@ -22,9 +22,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 DO_FUNC:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/fpsp.h

@@ -5,9 +5,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |	fpsp.h --- stack frame offsets during FPSP exception handling
 |

arch/m68k/fpsp040/gen_except.S

@@ -29,9 +29,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 GEN_EXCEPT:    |idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/get_op.S

@@ -54,9 +54,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 GET_OP:    |idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/kernel_ex.S

@@ -12,9 +12,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 KERNEL_EX:    |idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/res_func.S

@@ -16,9 +16,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 RES_FUNC:    |idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/round.S

@@ -8,9 +8,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |ROUND	idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/sacos.S

@@ -38,9 +38,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SACOS	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/sasin.S

@@ -38,9 +38,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SASIN	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/satan.S

@@ -43,9 +43,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |satan	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/satanh.S

@@ -45,9 +45,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |satanh	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/scale.S

@@ -21,9 +21,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SCALE    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/scosh.S

@@ -49,9 +49,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SCOSH	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/setox.S

@@ -331,9 +331,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |setox	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/sgetem.S

@@ -24,9 +24,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SGETEM	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/sint.S

@@ -51,9 +51,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SINT    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/skeleton.S

@@ -30,9 +30,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |
 |	Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)

arch/m68k/fpsp040/slog2.S

@@ -96,9 +96,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SLOG2    idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/slogn.S

@@ -63,9 +63,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |slogn	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/smovecr.S

@@ -15,9 +15,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SMOVECR	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/srem_mod.S

@@ -66,9 +66,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 SREM_MOD:    |idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/ssin.S

@@ -83,9 +83,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SSIN	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/ssinh.S

@@ -49,9 +49,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |SSINH	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/stan.S

@@ -50,9 +50,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |STAN	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/stanh.S

@@ -49,9 +49,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |STANH	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/sto_res.S

@@ -19,9 +19,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 STO_RES:	|idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/stwotox.S

@@ -76,9 +76,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |STWOTOX	idnt	2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/tbldo.S

@@ -17,9 +17,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |TBLDO	idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/util.S

@@ -16,9 +16,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 |UTIL	idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_bsun.S

@@ -13,9 +13,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_BSUN:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_fline.S

@@ -13,9 +13,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_FLINE:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_operr.S

@@ -43,9 +43,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_OPERR:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_ovfl.S

@@ -35,9 +35,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_OVFL:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_snan.S

@@ -22,9 +22,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_SNAN:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_store.S

@@ -11,9 +11,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_STORE:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_unfl.S

@@ -21,9 +21,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_UNFL:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_unimp.S

@@ -22,9 +22,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_UNIMP:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68k/fpsp040/x_unsupp.S

@@ -23,9 +23,8 @@
 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
-|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+|       For details on the license for this file, please see the
-|	The copyright notice above does not evidence any
+|       file, README, in this same directory.
-|	actual or intended publication of such source code.
 
 X_UNSUPP:	|idnt    2,1 | Motorola 040 Floating Point Software Package
 

arch/m68knommu/Kconfig

@@ -29,6 +29,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config TIME_LOW_RES
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "Processor type and features"

arch/mips/Makefile

@@ -94,7 +94,6 @@ endif
 # machines may also.  Since BFD is incredibly buggy with respect to
 # crossformat linking we rely on the elf2ecoff tool for format conversion.
 #
-cflags-y			+= -I $(TOPDIR)/include/asm/gcc
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
 LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 MODFLAGS			+= -mlong-calls

arch/mips/kernel/process.c

@@ -25,6 +25,7 @@
 #include <linux/a.out.h>
 #include <linux/init.h>
 #include <linux/completion.h>
+#include <linux/kallsyms.h>
 
 #include <asm/abi.h>
 #include <asm/bootinfo.h>
@@ -272,46 +273,19 @@ long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 static struct mips_frame_info {
 	void *func;
-	int omit_fp;	/* compiled without fno-omit-frame-pointer */
+	unsigned long func_size;
-	int frame_offset;
+	int frame_size;
 	int pc_offset;
-} schedule_frame, mfinfo[] = {
+} *schedule_frame, mfinfo[64];
-	{ schedule, 0 },	/* must be first */
+static int mfinfo_num;
-	/* arch/mips/kernel/semaphore.c */
-	{ __down, 1 },
-	{ __down_interruptible, 1 },
-	/* kernel/sched.c */
-#ifdef CONFIG_PREEMPT
-	{ preempt_schedule, 0 },
-#endif
-	{ wait_for_completion, 0 },
-	{ interruptible_sleep_on, 0 },
-	{ interruptible_sleep_on_timeout, 0 },
-	{ sleep_on, 0 },
-	{ sleep_on_timeout, 0 },
-	{ yield, 0 },
-	{ io_schedule, 0 },
-	{ io_schedule_timeout, 0 },
-#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
-	{ __preempt_spin_lock, 0 },
-	{ __preempt_write_lock, 0 },
-#endif
-	/* kernel/timer.c */
-	{ schedule_timeout, 1 },
-/*	{ nanosleep_restart, 1 }, */
-	/* lib/rwsem-spinlock.c */
-	{ __down_read, 1 },
-	{ __down_write, 1 },
-};
 
-static int mips_frame_info_initialized;
 static int __init get_frame_info(struct mips_frame_info *info)
 {
 	int i;
 	void *func = info->func;
 	union mips_instruction *ip = (union mips_instruction *)func;
 	info->pc_offset = -1;
-	info->frame_offset = info->omit_fp ? 0 : -1;
+	info->frame_size = 0;
 	for (i = 0; i < 128; i++, ip++) {
 		/* if jal, jalr, jr, stop. */
 		if (ip->j_format.opcode == jal_op ||
@@ -320,6 +294,23 @@ static int __init get_frame_info(struct mips_frame_info *info)
 		      ip->r_format.func == jr_op)))
 			break;
 
+		if (info->func_size && i >= info->func_size / 4)
+			break;
+		if (
+#ifdef CONFIG_32BIT
+		    ip->i_format.opcode == addiu_op &&
+#endif
+#ifdef CONFIG_64BIT
+		    ip->i_format.opcode == daddiu_op &&
+#endif
+		    ip->i_format.rs == 29 &&
+		    ip->i_format.rt == 29) {
+			/* addiu/daddiu sp,sp,-imm */
+			if (info->frame_size)
+				continue;
+			info->frame_size = - ip->i_format.simmediate;
+		}
+
 		if (
 #ifdef CONFIG_32BIT
 		    ip->i_format.opcode == sw_op &&
@@ -327,31 +318,20 @@ static int __init get_frame_info(struct mips_frame_info *info)
 #ifdef CONFIG_64BIT
 		    ip->i_format.opcode == sd_op &&
 #endif
-		    ip->i_format.rs == 29)
+		    ip->i_format.rs == 29 &&
-		{
+		    ip->i_format.rt == 31) {
 			/* sw / sd $ra, offset($sp) */
-			if (ip->i_format.rt == 31) {
+			if (info->pc_offset != -1)
-				if (info->pc_offset != -1)
+				continue;
-					continue;
+			info->pc_offset =
-				info->pc_offset =
+				ip->i_format.simmediate / sizeof(long);
-					ip->i_format.simmediate / sizeof(long);
-			}
-			/* sw / sd $s8, offset($sp) */
-			if (ip->i_format.rt == 30) {
-//#if 0	/* gcc 3.4 does aggressive optimization... */
-				if (info->frame_offset != -1)
-					continue;
-//#endif
-				info->frame_offset =
-					ip->i_format.simmediate / sizeof(long);
-			}
 		}
 	}
-	if (info->pc_offset == -1 || info->frame_offset == -1) {
+	if (info->pc_offset == -1 || info->frame_size == 0) {
-		printk("Can't analyze prologue code at %p\n", func);
+		if (func == schedule)
+			printk("Can't analyze prologue code at %p\n", func);
 		info->pc_offset = -1;
-		info->frame_offset = -1;
+		info->frame_size = 0;
-		return -1;
 	}
 
 	return 0;
@@ -359,25 +339,36 @@ static int __init get_frame_info(struct mips_frame_info *info)
 
 static int __init frame_info_init(void)
 {
-	int i, found;
+	int i;
-	for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
+#ifdef CONFIG_KALLSYMS
-		if (get_frame_info(&mfinfo[i]))
+	char *modname;
-			return -1;
+	char namebuf[KSYM_NAME_LEN + 1];
-	schedule_frame = mfinfo[0];
+	unsigned long start, size, ofs;
-	/* bubble sort */
+	extern char __sched_text_start[], __sched_text_end[];
-	do {
+	extern char __lock_text_start[], __lock_text_end[];
-		struct mips_frame_info tmp;
+
-		found = 0;
+	start = (unsigned long)__sched_text_start;
-		for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
+	for (i = 0; i < ARRAY_SIZE(mfinfo); i++) {
-			if (mfinfo[i-1].func > mfinfo[i].func) {
+		if (start == (unsigned long)schedule)
-				tmp = mfinfo[i];
+			schedule_frame = &mfinfo[i];
-				mfinfo[i] = mfinfo[i-1];
+		if (!kallsyms_lookup(start, &size, &ofs, &modname, namebuf))
-				mfinfo[i-1] = tmp;
+			break;
-				found = 1;
+		mfinfo[i].func = (void *)(start + ofs);
-			}
+		mfinfo[i].func_size = size;
-		}
+		start += size - ofs;
-	} while (found);
+		if (start >= (unsigned long)__lock_text_end)
-	mips_frame_info_initialized = 1;
+			break;
+		if (start == (unsigned long)__sched_text_end)
+			start = (unsigned long)__lock_text_start;
+	}
+#else
+	mfinfo[0].func = schedule;
+	schedule_frame = &mfinfo[0];
+#endif
+	for (i = 0; i < ARRAY_SIZE(mfinfo) && mfinfo[i].func; i++)
+		get_frame_info(&mfinfo[i]);
+
+	mfinfo_num = i;
 	return 0;
 }
 
@@ -394,47 +385,52 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	if (t->reg31 == (unsigned long) ret_from_fork)
 		return t->reg31;
 
-	if (schedule_frame.pc_offset < 0)
+	if (!schedule_frame || schedule_frame->pc_offset < 0)
 		return 0;
-	return ((unsigned long *)t->reg29)[schedule_frame.pc_offset];
+	return ((unsigned long *)t->reg29)[schedule_frame->pc_offset];
 }
 
 /* get_wchan - a maintenance nightmare^W^Wpain in the ass ...  */
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long stack_page;
-	unsigned long frame, pc;
+	unsigned long pc;
+#ifdef CONFIG_KALLSYMS
+	unsigned long frame;
+#endif
 
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
 	stack_page = (unsigned long)task_stack_page(p);
-	if (!stack_page || !mips_frame_info_initialized)
+	if (!stack_page || !mfinfo_num)
 		return 0;
 
 	pc = thread_saved_pc(p);
+#ifdef CONFIG_KALLSYMS
 	if (!in_sched_functions(pc))
 		return pc;
 
-	frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+	frame = p->thread.reg29 + schedule_frame->frame_size;
 	do {
 		int i;
 
 		if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
 			return 0;
 
-		for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+		for (i = mfinfo_num - 1; i >= 0; i--) {
 			if (pc >= (unsigned long) mfinfo[i].func)
 				break;
 		}
 		if (i < 0)
 			break;
 
-		if (mfinfo[i].omit_fp)
-			break;
 		pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
-		frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+		if (!mfinfo[i].frame_size)
+			break;
+		frame += mfinfo[i].frame_size;
 	} while (in_sched_functions(pc));
+#endif
 
 	return pc;
 }

arch/mips/kernel/scall32-o32.S

@@ -623,7 +623,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_mknodat		4	/* 4290 */
 	sys	sys_fchownat		5
 	sys	sys_futimesat		3
-	sys	sys_newfstatat		4
+	sys	sys_fstatat64		4
 	sys	sys_unlinkat		3
 	sys	sys_renameat		4	/* 4295 */
 	sys	sys_linkat		4

arch/mips/kernel/signal-common.h

@@ -176,7 +176,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 	if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+	return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
 }
 
 static inline int install_sigtramp(unsigned int __user *tramp,

arch/mips/kernel/signal32.c

@@ -537,7 +537,7 @@ _sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	/* The ucontext contains a stack32_t, so we must convert!  */
 	if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
 		goto badframe;
-	st.ss_size = (long) sp;
+	st.ss_sp = (void *)(long) sp;
 	if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
 		goto badframe;
 	if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))

arch/mips/kernel/signal_n32.c

@@ -108,7 +108,7 @@ _sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	/* The ucontext contains a stack32_t, so we must convert!  */
 	if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
 		goto badframe;
-	st.ss_size = (long) sp;
+	st.ss_sp = (void *)(long) sp;
 	if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
 		goto badframe;
 	if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))

arch/mips/kernel/smp_mt.c

@@ -68,6 +68,8 @@ void __init sanitize_tlb_entries(void)
 
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
+	back_to_back_c0_hazard();
+
 	/* Disable TLB sharing */
 	clear_c0_mvpcontrol(MVPCONTROL_STLB);
 
@@ -102,35 +104,6 @@ void __init sanitize_tlb_entries(void)
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
 }
 
-#if 0
-/*
- * Use c0_MVPConf0 to find out how many CPUs are available, setting up
- * phys_cpu_present_map and the logical/physical mappings.
- */
-void __init prom_build_cpu_map(void)
-{
-	int i, num, ncpus;
-
-	cpus_clear(phys_cpu_present_map);
-
-	/* assume we boot on cpu 0.... */
-	cpu_set(0, phys_cpu_present_map);
-	__cpu_number_map[0] = 0;
-	__cpu_logical_map[0] = 0;
-
-	if (cpu_has_mipsmt) {
-		ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
-		for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
-			cpu_set(i, phys_cpu_present_map);
-			__cpu_number_map[i] = ++num;
-			__cpu_logical_map[num] = i;
-		}
-
-		printk(KERN_INFO "%i available secondary CPU(s)\n", num);
-	}
-}
-#endif
-
 static void ipi_resched_dispatch (struct pt_regs *regs)
 {
 	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
@@ -222,6 +195,9 @@ void prom_prepare_cpus(unsigned int max_cpus)
 
 				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
 				write_vpe_c0_config( read_c0_config());
+
+				/* Propagate Config7 */
+				write_vpe_c0_config7(read_c0_config7());
 			}
 
 		}

arch/mips/mm/c-r4k.c

@@ -471,61 +471,29 @@ struct flush_icache_range_args {
 static inline void local_r4k_flush_icache_range(void *args)
 {
 	struct flush_icache_range_args *fir_args = args;
-	unsigned long dc_lsize = cpu_dcache_line_size();
-	unsigned long ic_lsize = cpu_icache_line_size();
-	unsigned long sc_lsize = cpu_scache_line_size();
 	unsigned long start = fir_args->start;
 	unsigned long end = fir_args->end;
-	unsigned long addr, aend;
 
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start > dcache_size) {
 			r4k_blast_dcache();
 		} else {
 			R4600_HIT_CACHEOP_WAR_IMPL;
-			addr = start & ~(dc_lsize - 1);
+			protected_blast_dcache_range(start, end);
-			aend = (end - 1) & ~(dc_lsize - 1);
-
-			while (1) {
-				/* Hit_Writeback_Inv_D */
-				protected_writeback_dcache_line(addr);
-				if (addr == aend)
-					break;
-				addr += dc_lsize;
-			}
 		}
 
 		if (!cpu_icache_snoops_remote_store) {
-			if (end - start > scache_size) {
+			if (end - start > scache_size)
 				r4k_blast_scache();
-			} else {
+			else
-				addr = start & ~(sc_lsize - 1);
+				protected_blast_scache_range(start, end);
-				aend = (end - 1) & ~(sc_lsize - 1);
-
-				while (1) {
-					/* Hit_Writeback_Inv_SD */
-					protected_writeback_scache_line(addr);
-					if (addr == aend)
-						break;
-					addr += sc_lsize;
-				}
-			}
 		}
 	}
 
 	if (end - start > icache_size)
 		r4k_blast_icache();
-	else {
+	else
-		addr = start & ~(ic_lsize - 1);
+		protected_blast_icache_range(start, end);
-		aend = (end - 1) & ~(ic_lsize - 1);
-		while (1) {
-			/* Hit_Invalidate_I */
-			protected_flush_icache_line(addr);
-			if (addr == aend)
-				break;
-			addr += ic_lsize;
-		}
-	}
 }
 
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
@@ -619,27 +587,14 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
 
 static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
-	unsigned long end, a;
-
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = cpu_scache_line_size();
+		if (size >= scache_size)
-
-		if (size >= scache_size) {
 			r4k_blast_scache();
-			return;
+		else
-		}
+			blast_scache_range(addr, addr + size);
-
-		a = addr & ~(sc_lsize - 1);
-		end = (addr + size - 1) & ~(sc_lsize - 1);
-		while (1) {
-			flush_scache_line(a);	/* Hit_Writeback_Inv_SD */
-			if (a == end)
-				break;
-			a += sc_lsize;
-		}
 		return;
 	}
 
@@ -651,17 +606,8 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = cpu_dcache_line_size();
-
 		R4600_HIT_CACHEOP_WAR_IMPL;
-		a = addr & ~(dc_lsize - 1);
+		blast_dcache_range(addr, addr + size);
-		end = (addr + size - 1) & ~(dc_lsize - 1);
-		while (1) {
-			flush_dcache_line(a);	/* Hit_Writeback_Inv_D */
-			if (a == end)
-				break;
-			a += dc_lsize;
-		}
 	}
 
 	bc_wback_inv(addr, size);
@@ -669,44 +615,22 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 
 static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 {
-	unsigned long end, a;
-
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
 	if (cpu_has_subset_pcaches) {
-		unsigned long sc_lsize = cpu_scache_line_size();
+		if (size >= scache_size)
-
-		if (size >= scache_size) {
 			r4k_blast_scache();
-			return;
+		else
-		}
+			blast_scache_range(addr, addr + size);
-
-		a = addr & ~(sc_lsize - 1);
-		end = (addr + size - 1) & ~(sc_lsize - 1);
-		while (1) {
-			flush_scache_line(a);	/* Hit_Writeback_Inv_SD */
-			if (a == end)
-				break;
-			a += sc_lsize;
-		}
 		return;
 	}
 
 	if (size >= dcache_size) {
 		r4k_blast_dcache();
 	} else {
-		unsigned long dc_lsize = cpu_dcache_line_size();
-
 		R4600_HIT_CACHEOP_WAR_IMPL;
-		a = addr & ~(dc_lsize - 1);
+		blast_dcache_range(addr, addr + size);
-		end = (addr + size - 1) & ~(dc_lsize - 1);
-		while (1) {
-			flush_dcache_line(a);	/* Hit_Writeback_Inv_D */
-			if (a == end)
-				break;
-			a += dc_lsize;
-		}
 	}
 
 	bc_inv(addr, size);

arch/mips/mm/c-tx39.c

@@ -44,8 +44,6 @@ __asm__ __volatile__( \
 /* TX39H-style cache flush routines. */
 static void tx39h_flush_icache_all(void)
 {
-	unsigned long start = KSEG0;
-	unsigned long end = (start + icache_size);
 	unsigned long flags, config;
 
 	/* disable icache (set ICE#) */
@@ -53,33 +51,18 @@ static void tx39h_flush_icache_all(void)
 	config = read_c0_conf();
 	write_c0_conf(config & ~TX39_CONF_ICE);
 	TX39_STOP_STREAMING();
-
+	blast_icache16();
-	/* invalidate icache */
-	while (start < end) {
-		cache16_unroll32(start, Index_Invalidate_I);
-		start += 0x200;
-	}
-
 	write_c0_conf(config);
 	local_irq_restore(flags);
 }
 
 static void tx39h_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
-	unsigned long end, a;
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
 	iob();
-	a = addr & ~(dc_lsize - 1);
+	blast_inv_dcache_range(addr, addr + size);
-	end = (addr + size - 1) & ~(dc_lsize - 1);
-	while (1) {
-		invalidate_dcache_line(a); /* Hit_Invalidate_D */
-		if (a == end) break;
-		a += dc_lsize;
-	}
 }
 
 
@@ -241,42 +224,21 @@ static void tx39_flush_data_cache_page(unsigned long addr)
 
 static void tx39_flush_icache_range(unsigned long start, unsigned long end)
 {
-	unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-	unsigned long addr, aend;
-
 	if (end - start > dcache_size)
 		tx39_blast_dcache();
-	else {
+	else
-		addr = start & ~(dc_lsize - 1);
+		protected_blast_dcache_range(start, end);
-		aend = (end - 1) & ~(dc_lsize - 1);
-
-		while (1) {
-			/* Hit_Writeback_Inv_D */
-			protected_writeback_dcache_line(addr);
-			if (addr == aend)
-				break;
-			addr += dc_lsize;
-		}
-	}
 
 	if (end - start > icache_size)
 		tx39_blast_icache();
 	else {
 		unsigned long flags, config;
-		addr = start & ~(dc_lsize - 1);
-		aend = (end - 1) & ~(dc_lsize - 1);
 		/* disable icache (set ICE#) */
 		local_irq_save(flags);
 		config = read_c0_conf();
 		write_c0_conf(config & ~TX39_CONF_ICE);
 		TX39_STOP_STREAMING();
-		while (1) {
+		protected_blast_icache_range(start, end);
-			/* Hit_Invalidate_I */
-			protected_flush_icache_line(addr);
-			if (addr == aend)
-				break;
-			addr += dc_lsize;
-		}
 		write_c0_conf(config);
 		local_irq_restore(flags);
 	}
@@ -311,7 +273,7 @@ static void tx39_flush_icache_page(struct vm_area_struct *vma, struct page *page
 
 static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
-	unsigned long end, a;
+	unsigned long end;
 
 	if (((size | addr) & (PAGE_SIZE - 1)) == 0) {
 		end = addr + size;
@@ -322,20 +284,13 @@ static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	} else if (size > dcache_size) {
 		tx39_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		blast_dcache_range(addr, addr + size);
-		a = addr & ~(dc_lsize - 1);
-		end = (addr + size - 1) & ~(dc_lsize - 1);
-		while (1) {
-			flush_dcache_line(a); /* Hit_Writeback_Inv_D */
-			if (a == end) break;
-			a += dc_lsize;
-		}
 	}
 }
 
 static void tx39_dma_cache_inv(unsigned long addr, unsigned long size)
 {
-	unsigned long end, a;
+	unsigned long end;
 
 	if (((size | addr) & (PAGE_SIZE - 1)) == 0) {
 		end = addr + size;
@@ -346,14 +301,7 @@ static void tx39_dma_cache_inv(unsigned long addr, unsigned long size)
 	} else if (size > dcache_size) {
 		tx39_blast_dcache();
 	} else {
-		unsigned long dc_lsize = current_cpu_data.dcache.linesz;
+		blast_inv_dcache_range(addr, addr + size);
-		a = addr & ~(dc_lsize - 1);
-		end = (addr + size - 1) & ~(dc_lsize - 1);
-		while (1) {
-			invalidate_dcache_line(a); /* Hit_Invalidate_D */
-			if (a == end) break;
-			a += dc_lsize;
-		}
 	}
 }
 

arch/parisc/Kconfig

@@ -29,6 +29,11 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config TIME_LOW_RES
+	bool
+	depends on SMP
+	default y
+
 config GENERIC_ISA_DMA
 	bool
 

arch/parisc/kernel/syscall_table.S

@@ -377,15 +377,15 @@
 	ENTRY_SAME(inotify_init)
 	ENTRY_SAME(inotify_add_watch)	/* 270 */
 	ENTRY_SAME(inotify_rm_watch)
-	ENTRY_COMP(pselect6)
+	ENTRY_SAME(ni_syscall)		/* 271 ENTRY_COMP(pselect6) */
-	ENTRY_COMP(ppoll)
+	ENTRY_SAME(ni_syscall)		/* 272 ENTRY_COMP(ppoll) */
 	ENTRY_SAME(migrate_pages)
 	ENTRY_COMP(openat)		/* 275 */
 	ENTRY_SAME(mkdirat)
 	ENTRY_SAME(mknodat)
 	ENTRY_SAME(fchownat)
 	ENTRY_COMP(futimesat)
-	ENTRY_COMP(newfstatat)		/* 280 */
+	ENTRY_SAME(fstatat64)		/* 280 */
 	ENTRY_SAME(unlinkat)
 	ENTRY_SAME(renameat)
 	ENTRY_SAME(linkat)

arch/powerpc/Kconfig

@@ -83,6 +83,12 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config DEFAULT_UIMAGE
+	bool
+	help
+	  Used to allow a board to specify it wants a uImage built by default
+	default n
+
 menu "Processor support"
 choice
 	prompt "Processor Type"

arch/powerpc/Makefile

@@ -142,6 +142,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 defaultimage-y			:= zImage
 defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage
 KBUILD_IMAGE := $(defaultimage-y)
 all: $(KBUILD_IMAGE)
 

arch/powerpc/kernel/Makefile

@@ -12,10 +12,10 @@ endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
-				   init_task.o process.o
+				   init_task.o process.o systbl.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
-				   signal_64.o ptrace32.o systbl.o \
+				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_power4.o \
 				   firmware.o sysfs.o idle_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= time.o prom.o traps.o setup-common.o udbg.o
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o

arch/powerpc/kernel/systbl.S

@@ -36,8 +36,6 @@
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
 #define sys_old_getrlimit sys_ni_syscall
-#else
-#define ppc_rtas	sys_ni_syscall
 #endif
 
 _GLOBAL(sys_call_table)
@@ -323,3 +321,4 @@ SYSCALL(spu_run)
 SYSCALL(spu_create)
 COMPAT_SYS(pselect6)
 COMPAT_SYS(ppoll)
+SYSCALL(unshare)

arch/ppc/kernel/misc.S

@@ -1048,286 +1048,3 @@ _GLOBAL(name) \
 	blr
 
 SYSCALL(execve)
-
-/* Why isn't this a) automatic, b) written in 'C'? */
-	.data
-	.align 4
-_GLOBAL(sys_call_table)
-	.long sys_restart_syscall /* 0 */
-	.long sys_exit
-	.long ppc_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open		/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink	/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod		/* 15 */
-	.long sys_lchown
-	.long sys_ni_syscall			/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid	/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid
-	.long sys_getuid
-	.long sys_stime		/* 25 */
-	.long sys_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime		/* 30 */
-	.long sys_ni_syscall			/* old stty syscall holder */
-	.long sys_ni_syscall			/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir		/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall			/* old prof syscall holder */
-	.long sys_brk		/* 45 */
-	.long sys_setgid
-	.long sys_getgid
-	.long sys_signal
-	.long sys_geteuid
-	.long sys_getegid	/* 50 */
-	.long sys_acct
-	.long sys_umount			/* recycled never used phys() */
-	.long sys_ni_syscall			/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl		/* 55 */
-	.long sys_ni_syscall			/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall			/* old ulimit syscall holder */
-	.long sys_olduname
-	.long sys_umask		/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp	/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid	/* 70 */
-	.long sys_setregid
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit	/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups	/* 80 */
-	.long sys_setgroups
-	.long ppc_select
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink	/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long old_readdir
-	.long sys_mmap		/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown	/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall			/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs	/* 100 */
-	.long sys_ni_syscall
-	.long sys_socketcall
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer	/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_uname
-	.long sys_ni_syscall	/* 110 */
-	.long sys_vhangup
-	.long sys_ni_syscall	/* old 'idle' syscall */
-	.long sys_ni_syscall
-	.long sys_wait4
-	.long sys_swapoff	/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc
-	.long sys_fsync
-	.long sys_sigreturn
-	.long ppc_clone		/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_ni_syscall
-	.long sys_adjtimex
-	.long sys_mprotect	/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall	/* old sys_create_module */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall	/* old sys_get_kernel_syms */	/* 130 */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs		/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall	/* for afs_syscall */
-	.long sys_setfsuid
-	.long sys_setfsgid
-	.long sys_llseek	/* 140 */
-	.long sys_getdents
-	.long ppc_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv		/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock		/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam	/* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid
-	.long sys_getresuid	/* 165 */
-	.long sys_ni_syscall		/* old sys_query_module */
-	.long sys_poll
-	.long sys_nfsservctl
-	.long sys_setresgid
-	.long sys_getresgid	/* 170 */
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask
-	.long sys_rt_sigpending	/* 175 */
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread64
-	.long sys_pwrite64	/* 180 */
-	.long sys_chown
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset
-	.long sys_sigaltstack	/* 185 */
-	.long sys_sendfile
-	.long sys_ni_syscall		/* streams1 */
-	.long sys_ni_syscall		/* streams2 */
-	.long ppc_vfork
-	.long sys_getrlimit	/* 190 */
-	.long sys_readahead
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64	/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_pciconfig_read
-	.long sys_pciconfig_write
-	.long sys_pciconfig_iobase 	/* 200 */
-	.long sys_ni_syscall		/* 201 - reserved - MacOnLinux - new */
-	.long sys_getdents64
-	.long sys_pivot_root
-	.long sys_fcntl64
-	.long sys_madvise	/* 205 */
-	.long sys_mincore
-	.long sys_gettid
-	.long sys_tkill
-	.long sys_setxattr
-	.long sys_lsetxattr	/* 210 */
-	.long sys_fsetxattr
-	.long sys_getxattr
-	.long sys_lgetxattr
-	.long sys_fgetxattr
-	.long sys_listxattr	/* 215 */
-	.long sys_llistxattr
-	.long sys_flistxattr
-	.long sys_removexattr
-	.long sys_lremovexattr
-	.long sys_fremovexattr	/* 220 */
-	.long sys_futex
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity
-	.long sys_ni_syscall
-	.long sys_ni_syscall	/* 225 - reserved for Tux */
-	.long sys_sendfile64
-	.long sys_io_setup
-	.long sys_io_destroy
-	.long sys_io_getevents
-	.long sys_io_submit	/* 230 */
-	.long sys_io_cancel
-	.long sys_set_tid_address
-	.long sys_fadvise64
-	.long sys_exit_group
-	.long sys_lookup_dcookie /* 235 */
-	.long sys_epoll_create
-	.long sys_epoll_ctl
-	.long sys_epoll_wait
-	.long sys_remap_file_pages
-	.long sys_timer_create	/* 240 */
-	.long sys_timer_settime
-	.long sys_timer_gettime
-	.long sys_timer_getoverrun
-	.long sys_timer_delete
-	.long sys_clock_settime	/* 245 */
-	.long sys_clock_gettime
-	.long sys_clock_getres
-	.long sys_clock_nanosleep
-	.long sys_swapcontext
-	.long sys_tgkill	/* 250 */
-	.long sys_utimes
-	.long sys_statfs64
-	.long sys_fstatfs64
-	.long ppc_fadvise64_64
-	.long sys_ni_syscall		/* 255 - rtas (used on ppc64) */
-	.long sys_debug_setcontext
-	.long sys_ni_syscall		/* 257 reserved for vserver */
-	.long sys_ni_syscall		/* 258 reserved for new sys_remap_file_pages */
-	.long sys_ni_syscall		/* 259 reserved for new sys_mbind */
-	.long sys_ni_syscall		/* 260 reserved for new sys_get_mempolicy */
-	.long sys_ni_syscall		/* 261 reserved for new sys_set_mempolicy */
-	.long sys_mq_open
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive	/* 265 */
-	.long sys_mq_notify
-	.long sys_mq_getsetattr
-	.long sys_kexec_load
-	.long sys_add_key
-	.long sys_request_key		/* 270 */
-	.long sys_keyctl
-	.long sys_waitid
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init		/* 275 */
-	.long sys_inotify_add_watch
-	.long sys_inotify_rm_watch

arch/s390/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
+# Linux kernel version: 2.6.16-rc2
-# Thu Jan 19 10:58:53 2006
+# Wed Feb  8 10:44:39 2006
 #
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -12,7 +12,6 @@ CONFIG_S390=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +153,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -607,6 +607,7 @@ CONFIG_MSDOS_PARTITION=y
 # Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_STATISTICS is not set
 
 #
 # Kernel hacking
@@ -624,7 +625,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set

arch/s390/kernel/compat_linux.c

@@ -905,6 +905,26 @@ asmlinkage long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * sta
 	return ret;
 }
 
+asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
+			      struct stat64_emu31 __user* statbuf, int flag)
+{
+	struct kstat stat;
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, &stat);
+	else
+		error = vfs_stat_fd(dfd, filename, &stat);
+
+	if (!error)
+		error = cp_stat64(statbuf, &stat);
+out:
+	return error;
+}
+
 /*
  * Linux/i386 didn't use to be able to handle more than
  * 4 system call parameters, so these system calls used a memory

arch/s390/kernel/compat_signal.c

@@ -195,9 +195,6 @@ sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
 	return ret;
 }
 
-int
-do_sigaction(int sig, const struct k_sigaction *act, struct k_sigaction *oact);
-
 asmlinkage long
 sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 	   struct sigaction32 __user *oact,  size_t sigsetsize)

arch/s390/kernel/compat_wrapper.S

@@ -1523,13 +1523,13 @@ compat_sys_futimesat_wrapper:
 	llgtr	%r4,%r4			# struct timeval *
 	jg	compat_sys_futimesat
 
-	.globl compat_sys_newfstatat_wrapper
+	.globl sys32_fstatat_wrapper
-compat_sys_newfstatat_wrapper:
+sys32_fstatat_wrapper:
 	llgfr	%r2,%r2			# unsigned int
 	llgtr	%r3,%r3			# char *
-	llgtr	%r4,%r4			# struct stat *
+	llgtr	%r4,%r4			# struct stat64 *
 	lgfr	%r5,%r5			# int
-	jg	compat_sys_newfstatat
+	jg	sys32_fstatat
 
 	.globl sys_unlinkat_wrapper
 sys_unlinkat_wrapper:
@@ -1602,3 +1602,8 @@ compat_sys_ppoll_wrapper:
 	llgtr	%r5,%r5			# const sigset_t *
 	llgfr	%r6,%r6			# size_t
 	jg	compat_sys_ppoll
+
+	.globl sys_unshare_wrapper
+sys_unshare_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	jg	sys_unshare

arch/s390/kernel/machine_kexec.c

@@ -12,15 +12,16 @@
  * on the S390 architecture.
  */
 
-#include <asm/cio.h>
-#include <asm/setup.h>
 #include <linux/device.h>
 #include <linux/mm.h>
 #include <linux/kexec.h>
 #include <linux/delay.h>
+#include <asm/cio.h>
+#include <asm/setup.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/system.h>
+#include <asm/smp.h>
 
 static void kexec_halt_all_cpus(void *);
 

arch/s390/kernel/smp.c

@@ -52,7 +52,7 @@ extern volatile int __cpu_logical_map[];
 struct _lowcore *lowcore_ptr[NR_CPUS];
 
 cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
 
 static struct task_struct *current_set[NR_CPUS];
 
@@ -514,9 +514,6 @@ __init smp_check_cpus(unsigned int max_cpus)
 		num_cpus++;
 	}
 
-	for (cpu = 1; cpu < max_cpus; cpu++)
-		cpu_set(cpu, cpu_possible_map);
-
 	printk("Detected %d CPU's\n",(int) num_cpus);
 	printk("Boot cpu address %2X\n", boot_cpu_addr);
 }
@@ -810,7 +807,6 @@ void __devinit smp_prepare_boot_cpu(void)
 
 	cpu_set(0, cpu_online_map);
 	cpu_set(0, cpu_present_map);
-	cpu_set(0, cpu_possible_map);
 	S390_lowcore.percpu_offset = __per_cpu_offset[0];
 	current_set[0] = current;
 }

arch/s390/kernel/syscalls.S

@@ -301,7 +301,7 @@ SYSCALL(sys_mkdirat,sys_mkdirat,sys_mkdirat_wrapper)
 SYSCALL(sys_mknodat,sys_mknodat,sys_mknodat_wrapper)	/* 290 */
 SYSCALL(sys_fchownat,sys_fchownat,sys_fchownat_wrapper)
 SYSCALL(sys_futimesat,sys_futimesat,compat_sys_futimesat_wrapper)
-SYSCALL(sys_newfstatat,sys_newfstatat,compat_sys_newfstatat_wrapper)
+SYSCALL(sys_fstatat64,sys_newfstatat,sys32_fstatat_wrapper)
 SYSCALL(sys_unlinkat,sys_unlinkat,sys_unlinkat_wrapper)
 SYSCALL(sys_renameat,sys_renameat,sys_renameat_wrapper)	/* 295 */
 SYSCALL(sys_linkat,sys_linkat,sys_linkat_wrapper)
@@ -311,3 +311,4 @@ SYSCALL(sys_fchmodat,sys_fchmodat,sys_fchmodat_wrapper)
 SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper)	/* 300 */
 SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper)
 SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper)
+SYSCALL(sys_unshare,sys_unshare,sys_unshare_wrapper)

arch/s390/lib/delay.c

@@ -30,7 +30,7 @@ void __delay(unsigned long loops)
          */
         __asm__ __volatile__(
                 "0: brct %0,0b"
-                : /* no outputs */ : "r" (loops/2) );
+                : /* no outputs */ : "r" ((loops/2) + 1));
 }
 
 /*

arch/sparc/kernel/systbls.S

@@ -76,7 +76,7 @@ sys_call_table:
 /*270*/	.long sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
 /*275*/	.long sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
 /*280*/	.long sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
-/*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_newfstatat
+/*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 /*295*/	.long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
 

arch/sparc64/kernel/sys_sparc32.c

@@ -428,6 +428,27 @@ asmlinkage long compat_sys_fstat64(unsigned int fd,
 	return error;
 }
 
+asmlinkage long compat_sys_fstatat64(unsigned int dfd, char __user *filename,
+		struct compat_stat64 __user * statbuf, int flag)
+{
+	struct kstat stat;
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, &stat);
+	else
+		error = vfs_stat_fd(dfd, filename, &stat);
+
+	if (!error)
+		error = cp_compat_stat64(&stat, statbuf);
+
+out:
+	return error;
+}
+
 asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
 {
 	return sys_sysfs(option, arg1, arg2);

arch/sparc64/kernel/systbls.S

@@ -77,7 +77,7 @@ sys_call_table32:
 /*270*/	.word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
 	.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
 /*280*/	.word sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
-	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_newfstatat
+	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
 /*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
 
@@ -146,7 +146,7 @@ sys_call_table:
 /*270*/	.word sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
 	.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
 /*280*/	.word sys_nis_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
-	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_newfstatat
+	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
 

arch/v850/Kconfig

@@ -28,6 +28,10 @@ config GENERIC_IRQ_PROBE
 	bool
 	default y
 
+config TIME_LOW_RES
+	bool
+	default y
+
 # Turn off some random 386 crap that can affect device config
 config ISA
 	bool

arch/x86_64/ia32/ia32entry.S

@@ -677,7 +677,7 @@ ia32_sys_call_table:
 	.quad sys_mknodat
 	.quad sys_fchownat
 	.quad compat_sys_futimesat
-	.quad compat_sys_newfstatat	/* 300 */
+	.quad sys32_fstatat		/* 300 */
 	.quad sys_unlinkat
 	.quad sys_renameat
 	.quad sys_linkat