scsi: ufs: suspend clock scaling at the start of suspend

Currently clock scaling is suspended only after the host and device
are put in low power mode but we should avoid clock scaling running
after UFS link is put in low power mode (hibern8). This change
suspends clock scaling before putting host/device in low power mode.

Change-Id: Iff9846cee1345a3c0c8b1aaee0b4ad567f37ea79
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
This commit is contained in:
Subhash Jadavani 2014-12-19 16:54:56 -08:00 committed by David Keitel
parent 60455e93d1
commit 1008d1889d

View file

@ -7380,6 +7380,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
}
hba->pm_qos.is_suspended = true;
ufshcd_suspend_clkscaling(hba);
if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
req_link_state == UIC_LINK_ACTIVE_STATE) {
goto disable_clks;
@ -7387,12 +7389,12 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
(req_link_state == hba->uic_link_state))
goto out;
goto enable_gating;
/* UFS device & link must be active before we enter in this function */
if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
ret = -EINVAL;
goto out;
goto enable_gating;
}
if (ufshcd_is_runtime_pm(pm_op)) {
@ -7431,12 +7433,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_vreg_set_lpm(hba);
disable_clks:
/*
* The clock scaling needs access to controller registers. Hence, Wait
* for pending clock scaling work to be done before clocks are
* turned off.
*/
ufshcd_suspend_clkscaling(hba);
/*
* Call vendor specific suspend callback. As these callbacks may access
* vendor specific host controller register space call them before the
@ -7485,6 +7481,7 @@ set_dev_active:
if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
ufshcd_disable_auto_bkops(hba);
enable_gating:
ufshcd_resume_clkscaling(hba);
hba->hibern8_on_idle.is_suspended = false;
hba->clk_gating.is_suspended = false;
spin_lock_irqsave(hba->host->host_lock, flags);