diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index d039b8a49abd..3e556f074f19 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \
 	msm8996-v3-dtp.dtb \
 	msm8996-v3-pm8004-mmxf-adp.dtb \
 	msm8996-v3-pm8004-agave-adp.dtb \
+	msm8996pro-auto-adp.dtb \
 	msm8996pro-auto-cdp.dtb \
 	msm8996pro-pmi8994-cdp.dtb \
 	msm8996pro-pmi8994-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom/msm8996pro-auto-adp.dts b/arch/arm/boot/dts/qcom/msm8996pro-auto-adp.dts
new file mode 100644
index 000000000000..3ed46b3399ac
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8996pro-auto-adp.dts
@@ -0,0 +1,151 @@
+/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-pm8994.dtsi"
+#include "msm8996-agave-adp.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP";
+	compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp";
+	qcom,msm-id = <315 0x10000>;
+	qcom,board-id = <0x02010019 0>;
+};
+
+&spi_9 {
+	status = "ok";
+	can-controller@0 {
+		compatible = "renesas,rh850";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <122 0>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
+&pm8994_mpps {
+	mpp@a500 { /* MPP 6 */
+		qcom,mode = <1>;		/* Digital output */
+		qcom,output-type = <0>;		/* CMOS logic */
+		qcom,vin-sel = <2>;		/* S4 1.8V */
+		qcom,src-sel = <0>;		/* Constant */
+		qcom,master-en = <1>;		/* Enable GPIO */
+		status = "okay";
+	};
+};
+
+&hl7509_en_vreg {
+	status = "ok";
+};
+
+&hl7509_vreg {
+	status = "ok";
+};
+
+&gfx_cpr {
+	vdd-supply = <&hl7509_vreg>;
+	qcom,cpr-step-quot-init-min = <20>;
+	qcom,cpr-step-quot-init-max = <26>;
+	qcom,voltage-step = <10000>;
+	/delete-property/ qcom,cpr-enable;
+};
+
+&gfx_vreg {
+	qcom,cpr-voltage-ceiling =
+		<600000  670000  670000  750000  830000
+		 910000  960000 1020000>;
+	qcom,cpr-voltage-floor =
+		<600000  600000  600000  600000  600000
+		 600000  600000  600000>;
+};
+
+&pm8994_l3 {
+	regulator-min-microvolt = <875000>;
+	regulator-max-microvolt = <875000>;
+	qcom,init-voltage = <875000>;
+};
+
+&pm8994_l11 {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <850000>;
+	qcom,init-voltage = <850000>;
+};
+
+&pm8994_l17 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	qcom,init-voltage = <1800000>;
+};
+
+&pm8994_l23 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	qcom,init-voltage = <1100000>;
+};
+
+&pm8994_l27 {
+	regulator-min-microvolt = <800000>;
+	regulator-max-microvolt = <800000>;
+	qcom,init-voltage = <800000>;
+};
+
+&pm8994_l29 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	qcom,init-voltage = <2500000>;
+};
+
+&rpm_bus {
+	rpm-regulator-ldoa26 {
+		/delete-node/ pm8994_l26_corner;
+		/delete-node/ pm8994_l26_floor_corner;
+
+		pm8994_l26: regulator-l26 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,init-voltage = <1100000>;
+			status = "okay";
+		};
+	};
+
+	rpm-regulator-ldoa31 {
+		status = "okay";
+		pm8994_l31: regulator-l31 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,init-voltage = <1100000>;
+			status = "okay";
+		};
+	};
+};
+
+&gfx_vreg {
+	qcom,cpr-voltage-ceiling =
+		/* Speed bin 0 */
+		<600000  670000  670000  750000  830000  910000  960000 1020000
+		1070000>,
+
+		/* Speed bin 1 */
+		<600000  670000  670000  750000  830000  910000  960000 1020000
+		1070000>;
+
+	qcom,cpr-voltage-floor =
+		/* Speed bin 0 */
+		<600000  600000  600000  600000  600000  600000  600000  600000
+		 600000>,
+
+		/* Speed bin 1 */
+		<600000  600000  600000  600000  600000  600000  600000  600000
+		 600000>;
+};