[ARM] pxa/balloon3: Machine file cleanup
Modularize components of the Balloon3 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
This commit is contained in:
Marek Vasut
Eric Miao
parent
b0240bf4d4
commit
12a2449c79
1 changed files with 281 additions and 173 deletions
|
|
@ -22,6 +22,7 @@
|
||||||
#include <linux/fb.h>
|
#include <linux/fb.h>
|
||||||
#include <linux/gpio.h>
|
#include <linux/gpio.h>
|
||||||
#include <linux/ioport.h>
|
#include <linux/ioport.h>
|
||||||
|
#include <linux/ucb1400.h>
|
||||||
#include <linux/mtd/mtd.h>
|
#include <linux/mtd/mtd.h>
|
||||||
#include <linux/mtd/partitions.h>
|
#include <linux/mtd/partitions.h>
|
||||||
#include <linux/types.h>
|
#include <linux/types.h>
|
||||||
|
|
@ -61,167 +62,34 @@ static unsigned long balloon3_pin_config[] __initdata = {
|
||||||
GPIO44_BTUART_CTS,
|
GPIO44_BTUART_CTS,
|
||||||
GPIO45_BTUART_RTS,
|
GPIO45_BTUART_RTS,
|
||||||
|
|
||||||
/* Wakeup GPIO */
|
/* Reset, configured as GPIO wakeup source */
|
||||||
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||||
|
|
||||||
/* NAND & IDLE LED GPIOs */
|
/* LEDs */
|
||||||
GPIO9_GPIO,
|
GPIO9_GPIO, /* NAND activity LED */
|
||||||
GPIO10_GPIO,
|
GPIO10_GPIO, /* Heartbeat LED */
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
/* AC97 */
|
||||||
* Audio and Touchscreen
|
|
||||||
******************************************************************************/
|
|
||||||
static unsigned long balloon3_ac97_pin_config[] = {
|
|
||||||
GPIO28_AC97_BITCLK,
|
GPIO28_AC97_BITCLK,
|
||||||
GPIO29_AC97_SDATA_IN_0,
|
GPIO29_AC97_SDATA_IN_0,
|
||||||
GPIO30_AC97_SDATA_OUT,
|
GPIO30_AC97_SDATA_OUT,
|
||||||
GPIO31_AC97_SYNC,
|
GPIO31_AC97_SYNC,
|
||||||
GPIO113_AC97_nRESET,
|
GPIO113_AC97_nRESET,
|
||||||
};
|
GPIO95_GPIO,
|
||||||
|
|
||||||
/******************************************************************************
|
/* MMC */
|
||||||
* Framebuffer
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
static void balloon3_backlight_power(int on)
|
|
||||||
{
|
|
||||||
pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
|
|
||||||
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pxafb_mode_info balloon3_lcd_modes[] = {
|
|
||||||
{
|
|
||||||
.pixclock = 38000,
|
|
||||||
.xres = 480,
|
|
||||||
.yres = 640,
|
|
||||||
.bpp = 16,
|
|
||||||
.hsync_len = 8,
|
|
||||||
.left_margin = 8,
|
|
||||||
.right_margin = 8,
|
|
||||||
.vsync_len = 2,
|
|
||||||
.upper_margin = 4,
|
|
||||||
.lower_margin = 5,
|
|
||||||
.sync = 0,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct pxafb_mach_info balloon3_pxafb_info = {
|
|
||||||
.modes = balloon3_lcd_modes,
|
|
||||||
.num_modes = ARRAY_SIZE(balloon3_lcd_modes),
|
|
||||||
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
|
||||||
.pxafb_backlight_power = balloon3_backlight_power,
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* SD/MMC card controller
|
|
||||||
******************************************************************************/
|
|
||||||
static unsigned long balloon3_mmc_pin_config[] = {
|
|
||||||
GPIO32_MMC_CLK,
|
GPIO32_MMC_CLK,
|
||||||
GPIO92_MMC_DAT_0,
|
GPIO92_MMC_DAT_0,
|
||||||
GPIO109_MMC_DAT_1,
|
GPIO109_MMC_DAT_1,
|
||||||
GPIO110_MMC_DAT_2,
|
GPIO110_MMC_DAT_2,
|
||||||
GPIO111_MMC_DAT_3,
|
GPIO111_MMC_DAT_3,
|
||||||
GPIO112_MMC_CMD,
|
GPIO112_MMC_CMD,
|
||||||
};
|
|
||||||
|
|
||||||
static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
|
/* USB Host */
|
||||||
{
|
|
||||||
struct pxamci_platform_data *p_d = dev->platform_data;
|
|
||||||
|
|
||||||
if ((1 << vdd) & p_d->ocr_mask) {
|
|
||||||
pr_debug("%s: on\n", __func__);
|
|
||||||
/* FIXME something to prod here? */
|
|
||||||
} else {
|
|
||||||
pr_debug("%s: off\n", __func__);
|
|
||||||
/* FIXME something to prod here? */
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pxamci_platform_data balloon3_mci_platform_data = {
|
|
||||||
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
||||||
.setpower = balloon3_mci_setpower,
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* USB Gadget
|
|
||||||
******************************************************************************/
|
|
||||||
static int balloon3_udc_is_connected(void)
|
|
||||||
{
|
|
||||||
pr_debug("%s: udc connected\n", __func__);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void balloon3_udc_command(int cmd)
|
|
||||||
{
|
|
||||||
switch (cmd) {
|
|
||||||
case PXA2XX_UDC_CMD_CONNECT:
|
|
||||||
UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
|
|
||||||
pr_debug("%s: connect\n", __func__);
|
|
||||||
break;
|
|
||||||
case PXA2XX_UDC_CMD_DISCONNECT:
|
|
||||||
UP2OCR &= ~UP2OCR_DPPUE;
|
|
||||||
pr_debug("%s: disconnect\n", __func__);
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pxa2xx_udc_mach_info balloon3_udc_info = {
|
|
||||||
.udc_is_connected = balloon3_udc_is_connected,
|
|
||||||
.udc_command = balloon3_udc_command,
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* IrDA
|
|
||||||
******************************************************************************/
|
|
||||||
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
|
|
||||||
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* USB Host
|
|
||||||
******************************************************************************/
|
|
||||||
static unsigned long balloon3_ohci_pin_config[] = {
|
|
||||||
GPIO88_USBH1_PWR,
|
GPIO88_USBH1_PWR,
|
||||||
GPIO89_USBH1_PEN,
|
GPIO89_USBH1_PEN,
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct pxaohci_platform_data balloon3_ohci_platform_data = {
|
|
||||||
.port_mode = PMM_PERPORT_MODE,
|
|
||||||
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* LED
|
|
||||||
******************************************************************************/
|
|
||||||
static struct gpio_led balloon3_gpio_leds[] = {
|
|
||||||
{
|
|
||||||
.name = "balloon3:green:idle",
|
|
||||||
.default_trigger = "heartbeat",
|
|
||||||
.gpio = BALLOON3_GPIO_LED_IDLE,
|
|
||||||
.active_low = 1,
|
|
||||||
},
|
|
||||||
{
|
|
||||||
.name = "balloon3:green:nand",
|
|
||||||
.default_trigger = "nand-disk",
|
|
||||||
.gpio = BALLOON3_GPIO_LED_NAND,
|
|
||||||
.active_low = 1,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
|
|
||||||
.leds = balloon3_gpio_leds,
|
|
||||||
.num_leds = ARRAY_SIZE(balloon3_gpio_leds),
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct platform_device balloon3led_device = {
|
|
||||||
.name = "leds-gpio",
|
|
||||||
.id = -1,
|
|
||||||
.dev = {
|
|
||||||
.platform_data = &balloon3_gpio_leds_platform_data,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
/******************************************************************************
|
/******************************************************************************
|
||||||
* Compatibility: Parameter parsing
|
* Compatibility: Parameter parsing
|
||||||
******************************************************************************/
|
******************************************************************************/
|
||||||
|
|
@ -247,6 +115,268 @@ int __init parse_balloon3_features(char *arg)
|
||||||
}
|
}
|
||||||
early_param("balloon3_features", parse_balloon3_features);
|
early_param("balloon3_features", parse_balloon3_features);
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* NOR Flash
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
||||||
|
static struct mtd_partition balloon3_nor_partitions[] = {
|
||||||
|
{
|
||||||
|
.name = "Flash",
|
||||||
|
.offset = 0x00000000,
|
||||||
|
.size = MTDPART_SIZ_FULL,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct physmap_flash_data balloon3_flash_data[] = {
|
||||||
|
{
|
||||||
|
.width = 2, /* bankwidth in bytes */
|
||||||
|
.parts = balloon3_nor_partitions,
|
||||||
|
.nr_parts = ARRAY_SIZE(balloon3_nor_partitions)
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct resource balloon3_flash_resource = {
|
||||||
|
.start = PXA_CS0_PHYS,
|
||||||
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
||||||
|
.flags = IORESOURCE_MEM,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct platform_device balloon3_flash = {
|
||||||
|
.name = "physmap-flash",
|
||||||
|
.id = 0,
|
||||||
|
.resource = &balloon3_flash_resource,
|
||||||
|
.num_resources = 1,
|
||||||
|
.dev = {
|
||||||
|
.platform_data = balloon3_flash_data,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
static void __init balloon3_nor_init(void)
|
||||||
|
{
|
||||||
|
platform_device_register(&balloon3_flash);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_nor_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* Audio and Touchscreen
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
|
||||||
|
defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
|
||||||
|
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
|
||||||
|
.irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static struct platform_device balloon3_ucb1400_device = {
|
||||||
|
.name = "ucb1400_core",
|
||||||
|
.id = -1,
|
||||||
|
.dev = {
|
||||||
|
.platform_data = &vpac270_ucb1400_pdata,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_ts_init(void)
|
||||||
|
{
|
||||||
|
if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
|
||||||
|
return;
|
||||||
|
|
||||||
|
pxa_set_ac97_info(NULL);
|
||||||
|
platform_device_register(&balloon3_ucb1400_device);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_ts_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* Framebuffer
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
||||||
|
static struct pxafb_mode_info balloon3_lcd_modes[] = {
|
||||||
|
{
|
||||||
|
.pixclock = 38000,
|
||||||
|
.xres = 480,
|
||||||
|
.yres = 640,
|
||||||
|
.bpp = 16,
|
||||||
|
.hsync_len = 8,
|
||||||
|
.left_margin = 8,
|
||||||
|
.right_margin = 8,
|
||||||
|
.vsync_len = 2,
|
||||||
|
.upper_margin = 4,
|
||||||
|
.lower_margin = 5,
|
||||||
|
.sync = 0,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pxafb_mach_info balloon3_lcd_screen = {
|
||||||
|
.modes = balloon3_lcd_modes,
|
||||||
|
.num_modes = ARRAY_SIZE(balloon3_lcd_modes),
|
||||||
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void balloon3_backlight_power(int on)
|
||||||
|
{
|
||||||
|
gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __init balloon3_lcd_init(void)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
|
||||||
|
return;
|
||||||
|
|
||||||
|
ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
|
||||||
|
if (ret) {
|
||||||
|
pr_err("Requesting BKL-ON GPIO failed!\n");
|
||||||
|
goto err;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
|
||||||
|
if (ret) {
|
||||||
|
pr_err("Setting BKL-ON GPIO direction failed!\n");
|
||||||
|
goto err2;
|
||||||
|
}
|
||||||
|
|
||||||
|
balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
|
||||||
|
set_pxa_fb_info(&balloon3_lcd_screen);
|
||||||
|
return;
|
||||||
|
|
||||||
|
err2:
|
||||||
|
gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
|
||||||
|
err:
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_lcd_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* SD/MMC card controller
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
|
||||||
|
static struct pxamci_platform_data balloon3_mci_platform_data = {
|
||||||
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
||||||
|
.gpio_card_detect = -1,
|
||||||
|
.gpio_card_ro = -1,
|
||||||
|
.gpio_power = -1,
|
||||||
|
.detect_delay_ms = 200,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_mmc_init(void)
|
||||||
|
{
|
||||||
|
pxa_set_mci_info(&balloon3_mci_platform_data);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_mmc_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* USB Gadget
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
|
||||||
|
static void balloon3_udc_command(int cmd)
|
||||||
|
{
|
||||||
|
if (cmd == PXA2XX_UDC_CMD_CONNECT)
|
||||||
|
UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
|
||||||
|
else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
|
||||||
|
UP2OCR &= ~UP2OCR_DPPUE;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int balloon3_udc_is_connected(void)
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
|
||||||
|
.udc_command = balloon3_udc_command,
|
||||||
|
.udc_is_connected = balloon3_udc_is_connected,
|
||||||
|
.gpio_pullup = -1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_udc_init(void)
|
||||||
|
{
|
||||||
|
pxa_set_udc_info(&balloon3_udc_info);
|
||||||
|
platform_device_register(&balloon3_gpio_vbus);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_udc_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* IrDA
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
|
||||||
|
static struct pxaficp_platform_data balloon3_ficp_platform_data = {
|
||||||
|
.transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_irda_init(void)
|
||||||
|
{
|
||||||
|
pxa_set_ficp_info(&balloon3_ficp_platform_data);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_irda_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* USB Host
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
||||||
|
static struct pxaohci_platform_data balloon3_ohci_info = {
|
||||||
|
.port_mode = PMM_PERPORT_MODE,
|
||||||
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_uhc_init(void)
|
||||||
|
{
|
||||||
|
if (!balloon3_has(BALLOON3_FEATURE_OHCI))
|
||||||
|
return;
|
||||||
|
pxa_set_ohci_info(&balloon3_ohci_info);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_uhc_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* LEDs
|
||||||
|
******************************************************************************/
|
||||||
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
||||||
|
struct gpio_led balloon3_gpio_leds[] = {
|
||||||
|
{
|
||||||
|
.name = "balloon3:green:idle",
|
||||||
|
.default_trigger = "heartbeat",
|
||||||
|
.gpio = BALLOON3_GPIO_LED_IDLE,
|
||||||
|
.active_low = 1,
|
||||||
|
}, {
|
||||||
|
.name = "balloon3:green:nand",
|
||||||
|
.default_trigger = "nand-disk",
|
||||||
|
.gpio = BALLOON3_GPIO_LED_NAND,
|
||||||
|
.active_low = 1,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct gpio_led_platform_data balloon3_gpio_led_info = {
|
||||||
|
.leds = balloon3_gpio_leds,
|
||||||
|
.num_leds = ARRAY_SIZE(balloon3_gpio_leds),
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct platform_device balloon3_leds = {
|
||||||
|
.name = "leds-gpio",
|
||||||
|
.id = -1,
|
||||||
|
.dev = {
|
||||||
|
.platform_data = &balloon3_gpio_led_info,
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
static void __init balloon3_leds_init(void)
|
||||||
|
{
|
||||||
|
platform_device_register(&balloon3_leds);
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void balloon3_leds_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
/******************************************************************************
|
/******************************************************************************
|
||||||
* FPGA IRQ
|
* FPGA IRQ
|
||||||
******************************************************************************/
|
******************************************************************************/
|
||||||
|
|
@ -314,46 +444,24 @@ static void __init balloon3_init_irq(void)
|
||||||
******************************************************************************/
|
******************************************************************************/
|
||||||
static void __init balloon3_init(void)
|
static void __init balloon3_init(void)
|
||||||
{
|
{
|
||||||
pr_info("Initialising Balloon3\n");
|
|
||||||
|
|
||||||
/* system bus arbiter setting
|
|
||||||
* - Core_Park
|
|
||||||
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
|
||||||
*/
|
|
||||||
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
||||||
|
|
||||||
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
|
||||||
|
|
||||||
pxa_set_ffuart_info(NULL);
|
pxa_set_ffuart_info(NULL);
|
||||||
pxa_set_btuart_info(NULL);
|
pxa_set_btuart_info(NULL);
|
||||||
pxa_set_stuart_info(NULL);
|
pxa_set_stuart_info(NULL);
|
||||||
|
|
||||||
pxa_set_i2c_info(NULL);
|
pxa_set_i2c_info(NULL);
|
||||||
if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
|
|
||||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
|
|
||||||
pxa_set_ac97_info(NULL);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
|
balloon3_irda_init();
|
||||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
|
balloon3_lcd_init();
|
||||||
gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
|
balloon3_leds_init();
|
||||||
"LCD Backlight Power");
|
balloon3_mmc_init();
|
||||||
gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
|
balloon3_nor_init();
|
||||||
set_pxa_fb_info(&balloon3_pxafb_info);
|
balloon3_ts_init();
|
||||||
}
|
balloon3_udc_init();
|
||||||
|
balloon3_uhc_init();
|
||||||
if (balloon3_has(BALLOON3_FEATURE_MMC)) {
|
|
||||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
|
|
||||||
pxa_set_mci_info(&balloon3_mci_platform_data);
|
|
||||||
}
|
|
||||||
pxa_set_ficp_info(&balloon3_ficp_platform_data);
|
|
||||||
if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
|
|
||||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
|
|
||||||
pxa_set_ohci_info(&balloon3_ohci_platform_data);
|
|
||||||
}
|
|
||||||
pxa_set_udc_info(&balloon3_udc_info);
|
|
||||||
|
|
||||||
pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
|
|
||||||
|
|
||||||
platform_device_register(&balloon3led_device);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static struct map_desc balloon3_io_desc[] __initdata = {
|
static struct map_desc balloon3_io_desc[] __initdata = {
|
||||||
|
|
|
||||||
Loading…
Add table
Reference in a new issue