From 20735a44c829d2221b4a37e77f269727bb0fbd4a Mon Sep 17 00:00:00 2001
From: Mayank Rana <mrana@codeaurora.org>
Date: Mon, 21 Mar 2016 15:15:03 -0700
Subject: [PATCH] ARM: dts: msm: Add required USB related resources on
 msmcobalt

This change fixes USB and related different PHYs base address,
and interrupt. It also adds USB DBM and USB BAM related device
node and required resources for USB QDSS BAM functionality.

Signed-off-by: Mayank Rana <mrana@codeaurora.org>
---
 arch/arm/boot/dts/qcom/msmcobalt.dtsi | 51 +++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/msmcobalt.dtsi b/arch/arm/boot/dts/qcom/msmcobalt.dtsi
index dfc2f79b49b8..788f27a55e86 100644
--- a/arch/arm/boot/dts/qcom/msmcobalt.dtsi
+++ b/arch/arm/boot/dts/qcom/msmcobalt.dtsi
@@ -1042,10 +1042,11 @@
 		#size-cells = <1>;
 		ranges;
 
-		interrupts = <0 133 0>, <0 180 0>;
-		interrupt-names = "hs_phy_irq", "pwr_event_irq";
+		interrupts = <0 347 0>, <0 243 0>,  <0 180 0>;
+		interrupt-names = "hs_phy_irq", "ss_phy_irq", "pwr_event_irq";
 
 		USB3_GDSC-supply = <&gdsc_usb30>;
+		qcom,usb-dbm = <&dbm_1p5>;
 		qcom,msm-bus,name = "usb3";
 		qcom,msm-bus,num-cases = <2>;
 		qcom,msm-bus,num-paths = <1>;
@@ -1077,11 +1078,43 @@
 			snps,nominal-elastic-buffer;
 			snps,hird_thresh = <0x10>;
 		};
-	 };
 
-	qusb_phy0: qusb@c012200 {
+		qcom,usbbam@a904000 {
+			compatible = "qcom,usb-bam-msm";
+			reg = <0xa904000 0x3000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 132 0>;
+
+			qcom,bam-type = <0>;
+			qcom,usb-bam-fifo-baseaddr = <0x146bb000>;
+			qcom,usb-bam-num-pipes = <8>;
+			qcom,ignore-core-reset-ack;
+			qcom,disable-clk-gating;
+			qcom,usb-bam-override-threshold = <0x4001>;
+			qcom,usb-bam-max-mbps-highspeed = <400>;
+			qcom,usb-bam-max-mbps-superspeed = <3600>;
+			qcom,reset-bam-on-connect;
+
+			qcom,pipe0 {
+				label = "ssusb-qdss-in-0";
+				qcom,usb-bam-mem-type = <2>;
+				qcom,dir = <1>;
+				qcom,pipe-num = <0>;
+				qcom,peer-bam = <0>;
+				qcom,peer-bam-physical-address = <0x6064000>;
+				qcom,src-bam-pipe-index = <0>;
+				qcom,dst-bam-pipe-index = <0>;
+				qcom,data-fifo-offset = <0x0>;
+				qcom,data-fifo-size = <0x1800>;
+				qcom,descriptor-fifo-offset = <0x1800>;
+				qcom,descriptor-fifo-size = <0x800>;
+			};
+		};
+	};
+
+	qusb_phy0: qusb@c012000 {
 		compatible = "qcom,qusb2phy";
-		reg = <0x0c012200 0xb0>,
+		reg = <0x0c012000 0x2a8>,
 		      <0x0a8f8800 0x400>,
 			<0x0078024c 0x4>;
 		reg-names = "qusb_phy_base",
@@ -1112,7 +1145,7 @@
 
 	ssphy: ssphy@c010000 {
 		compatible = "qcom,usb-ssphy-qmp-v2";
-		reg = <0x0c010000 0xbf8>,
+		reg = <0x0c010000 0xe0c>,
 		      <0x01fcb244 0x4>;
 		reg-names = "qmp_phy_base",
 			    "vls_clamp_reg";
@@ -1254,6 +1287,12 @@
 			      "phy_phy_reset", "ref_clk_src", "ref_clk";
 	};
 
+	dbm_1p5: dbm@a8f8000 {
+		compatible = "qcom,usb-dbm-1p5";
+		reg = <0xa8f8000 0x300>;
+		qcom,reset-ep-after-lpm-resume;
+	};
+
 	qcom,lpass@17300000 {
 		compatible = "qcom,pil-tz-generic";
 		reg = <0x17300000 0x00100>;