diff --git a/drivers/soc/qcom/peripheral-loader.c b/drivers/soc/qcom/peripheral-loader.c
index e163dd79b8b9..b055234326b6 100644
--- a/drivers/soc/qcom/peripheral-loader.c
+++ b/drivers/soc/qcom/peripheral-loader.c
@@ -189,8 +189,8 @@ int pil_assign_mem_to_subsys(struct pil_desc *desc, phys_addr_t addr,
 
 	ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 1);
 	if (ret)
-		pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d\n",
-				__func__, &addr, size, desc->subsys_vmid);
+		pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n",
+				__func__, &addr, size, desc->subsys_vmid, ret);
 	return ret;
 }
 EXPORT_SYMBOL(pil_assign_mem_to_subsys);
@@ -205,8 +205,8 @@ int pil_assign_mem_to_linux(struct pil_desc *desc, phys_addr_t addr,
 
 	ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 1);
 	if (ret)
-		panic("%s: failed for %pa address of size %zx - subsys VMid %d. Fatal error.\n",
-				__func__, &addr, size, desc->subsys_vmid);
+		panic("%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n",
+				__func__, &addr, size, desc->subsys_vmid, ret);
 
 	return ret;
 }
@@ -222,8 +222,8 @@ int pil_assign_mem_to_subsys_and_linux(struct pil_desc *desc,
 
 	ret = hyp_assign_phys(addr, size, srcVM, 1, destVM, destVMperm, 2);
 	if (ret)
-		pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d\n",
-				__func__, &addr, size, desc->subsys_vmid);
+		pil_err(desc, "%s: failed for %pa address of size %zx - subsys VMid %d rc:%d\n",
+				__func__, &addr, size, desc->subsys_vmid, ret);
 
 	return ret;
 }
@@ -642,8 +642,8 @@ static int pil_load_seg(struct pil_desc *desc, struct pil_seg *seg)
 					      seg->filesz, desc->map_fw_mem,
 					      desc->unmap_fw_mem, map_data);
 		if (ret < 0) {
-			pil_err(desc, "Failed to locate blob %s or blob is too big.\n",
-				fw_name);
+			pil_err(desc, "Failed to locate blob %s or blob is too big(rc:%d)\n",
+				fw_name, ret);
 			return ret;
 		}
 
@@ -679,7 +679,8 @@ static int pil_load_seg(struct pil_desc *desc, struct pil_seg *seg)
 	if (desc->ops->verify_blob) {
 		ret = desc->ops->verify_blob(desc, seg->paddr, seg->sz);
 		if (ret)
-			pil_err(desc, "Blob%u failed verification\n", num);
+			pil_err(desc, "Blob%u failed verification(rc:%d)\n",
+								num, ret);
 	}
 
 	return ret;
@@ -754,7 +755,7 @@ int pil_boot(struct pil_desc *desc)
 	snprintf(fw_name, sizeof(fw_name), "%s.mdt", desc->fw_name);
 	ret = request_firmware(&fw, fw_name, desc->dev);
 	if (ret) {
-		pil_err(desc, "Failed to locate %s\n", fw_name);
+		pil_err(desc, "Failed to locate %s(rc:%d)\n", fw_name, ret);
 		goto out;
 	}
 
@@ -792,14 +793,14 @@ int pil_boot(struct pil_desc *desc)
 	desc->priv->unvoted_flag = 0;
 	ret = pil_proxy_vote(desc);
 	if (ret) {
-		pil_err(desc, "Failed to proxy vote\n");
+		pil_err(desc, "Failed to proxy vote(rc:%d)\n", ret);
 		goto release_fw;
 	}
 
 	if (desc->ops->init_image)
 		ret = desc->ops->init_image(desc, fw->data, fw->size);
 	if (ret) {
-		pil_err(desc, "Invalid firmware metadata\n");
+		pil_err(desc, "Initializing image failed(rc:%d)\n", ret);
 		goto err_boot;
 	}
 
@@ -807,7 +808,7 @@ int pil_boot(struct pil_desc *desc)
 		ret = desc->ops->mem_setup(desc, priv->region_start,
 				priv->region_end - priv->region_start);
 	if (ret) {
-		pil_err(desc, "Memory setup error\n");
+		pil_err(desc, "Memory setup error(rc:%d)\n", ret);
 		goto err_deinit_image;
 	}
 
@@ -852,7 +853,7 @@ int pil_boot(struct pil_desc *desc)
 
 	ret = desc->ops->auth_and_reset(desc);
 	if (ret) {
-		pil_err(desc, "Failed to bring out of reset\n");
+		pil_err(desc, "Failed to bring out of reset(rc:%d)\n", ret);
 		goto err_auth_and_reset;
 	}
 	pil_info(desc, "Brought out of reset\n");
diff --git a/drivers/soc/qcom/pil-msa.c b/drivers/soc/qcom/pil-msa.c
index 16c62240ec0a..3873a34c60fb 100644
--- a/drivers/soc/qcom/pil-msa.c
+++ b/drivers/soc/qcom/pil-msa.c
@@ -123,7 +123,8 @@ static int pil_mss_power_up(struct q6v5_data *drv)
 	if (drv->vreg) {
 		ret = regulator_enable(drv->vreg);
 		if (ret)
-			dev_err(drv->desc.dev, "Failed to enable modem regulator.\n");
+			dev_err(drv->desc.dev, "Failed to enable modem regulator(rc:%d)\n",
+									ret);
 	}
 
 	if (drv->cxrail_bhs) {
@@ -245,7 +246,7 @@ static int pil_msa_wait_for_mba_ready(struct q6v5_data *drv)
 	ret = readl_poll_timeout(drv->rmb_base + RMB_PBL_STATUS, status,
 				 status != 0, POLL_INTERVAL_US, val);
 	if (ret) {
-		dev_err(dev, "PBL boot timed out\n");
+		dev_err(dev, "PBL boot timed out (rc:%d)\n", ret);
 		return ret;
 	}
 	if (status != STATUS_PBL_SUCCESS) {
@@ -257,7 +258,7 @@ static int pil_msa_wait_for_mba_ready(struct q6v5_data *drv)
 	ret = readl_poll_timeout(drv->rmb_base + RMB_MBA_STATUS, status,
 				status != 0, POLL_INTERVAL_US, val);
 	if (ret) {
-		dev_err(dev, "MBA boot timed out\n");
+		dev_err(dev, "MBA boot timed out (rc:%d)\n", ret);
 		return ret;
 	}
 	if (status != STATUS_XPU_UNLOCKED &&
@@ -299,7 +300,8 @@ int pil_mss_shutdown(struct pil_desc *pil)
 		if (!ret)
 			assert_clamps(pil);
 		else
-			dev_err(pil->dev, "error turning ON AHB clock\n");
+			dev_err(pil->dev, "error turning ON AHB clock(rc:%d)\n",
+									ret);
 	}
 
 	ret = pil_mss_restart_reg(drv, 1);
@@ -328,7 +330,8 @@ int __pil_mss_deinit_image(struct pil_desc *pil, bool err_path)
 				status == STATUS_MBA_UNLOCKED || status < 0,
 				POLL_INTERVAL_US, val);
 		if (ret)
-			dev_err(pil->dev, "MBA region unlock timed out\n");
+			dev_err(pil->dev, "MBA region unlock timed out(rc:%d)\n",
+									ret);
 		else if (status < 0)
 			dev_err(pil->dev, "MBA unlock returned err status: %d\n",
 						status);
@@ -367,19 +370,20 @@ int pil_mss_make_proxy_votes(struct pil_desc *pil)
 
 	ret = of_property_read_u32(pil->dev->of_node, "vdd_mx-uV", &uv);
 	if (ret) {
-		dev_err(pil->dev, "missing vdd_mx-uV property\n");
+		dev_err(pil->dev, "missing vdd_mx-uV property(rc:%d)\n", ret);
 		return ret;
 	}
 
 	ret = regulator_set_voltage(drv->vreg_mx, uv, INT_MAX);
 	if (ret) {
-		dev_err(pil->dev, "Failed to request vreg_mx voltage\n");
+		dev_err(pil->dev, "Failed to request vreg_mx voltage(rc:%d)\n",
+									ret);
 		return ret;
 	}
 
 	ret = regulator_enable(drv->vreg_mx);
 	if (ret) {
-		dev_err(pil->dev, "Failed to enable vreg_mx\n");
+		dev_err(pil->dev, "Failed to enable vreg_mx(rc:%d)\n", ret);
 		regulator_set_voltage(drv->vreg_mx, 0, INT_MAX);
 		return ret;
 	}
@@ -540,8 +544,8 @@ int pil_mss_reset_load_mba(struct pil_desc *pil)
 	fw_name_p = drv->non_elf_image ? fw_name_legacy : fw_name;
 	ret = request_firmware(&fw, fw_name_p, pil->dev);
 	if (ret) {
-		dev_err(pil->dev, "Failed to locate %s\n",
-						fw_name_p);
+		dev_err(pil->dev, "Failed to locate %s (rc:%d)\n",
+						fw_name_p, ret);
 		return ret;
 	}
 
@@ -611,14 +615,15 @@ int pil_mss_reset_load_mba(struct pil_desc *pil)
 		ret = pil_assign_mem_to_subsys(pil, drv->mba_dp_phys,
 							drv->mba_dp_size);
 		if (ret) {
-			pr_err("scm_call to unprotect MBA and DP mem failed\n");
+			pr_err("scm_call to unprotect MBA and DP mem failed(rc:%d)\n",
+									ret);
 			goto err_mba_data;
 		}
 	}
 
 	ret = pil_mss_reset(pil);
 	if (ret) {
-		dev_err(pil->dev, "MBA boot failed.\n");
+		dev_err(pil->dev, "MBA boot failed(rc:%d)\n", ret);
 		goto err_mss_reset;
 	}
 
@@ -673,7 +678,8 @@ static int pil_msa_auth_modem_mdt(struct pil_desc *pil, const u8 *metadata,
 		ret = pil_assign_mem_to_subsys(pil, mdata_phys,
 							ALIGN(size, SZ_4K));
 		if (ret) {
-			pr_err("scm_call to unprotect modem metadata mem failed\n");
+			pr_err("scm_call to unprotect modem metadata mem failed(rc:%d)\n",
+									ret);
 			dma_free_attrs(&drv->mba_mem_dev, size, mdata_virt,
 							mdata_phys, &attrs);
 			goto fail;
@@ -690,7 +696,8 @@ static int pil_msa_auth_modem_mdt(struct pil_desc *pil, const u8 *metadata,
 			status == STATUS_META_DATA_AUTH_SUCCESS || status < 0,
 			POLL_INTERVAL_US, val);
 	if (ret) {
-		dev_err(pil->dev, "MBA authentication of headers timed out\n");
+		dev_err(pil->dev, "MBA authentication of headers timed out(rc:%d)\n",
+								ret);
 	} else if (status < 0) {
 		dev_err(pil->dev, "MBA returned error %d for headers\n",
 				status);
@@ -771,7 +778,8 @@ static int pil_msa_mba_auth(struct pil_desc *pil)
 	ret = readl_poll_timeout(drv->rmb_base + RMB_MBA_STATUS, status,
 		status == STATUS_AUTH_COMPLETE || status < 0, 50, val);
 	if (ret) {
-		dev_err(pil->dev, "MBA authentication of image timed out\n");
+		dev_err(pil->dev, "MBA authentication of image timed out(rc:%d)\n",
+									ret);
 	} else if (status < 0) {
 		dev_err(pil->dev, "MBA returned error %d for image\n", status);
 		ret = -EINVAL;
diff --git a/drivers/soc/qcom/pil-q6v5-mss.c b/drivers/soc/qcom/pil-q6v5-mss.c
index 5c0c1ffa8951..af9cd189cf6d 100644
--- a/drivers/soc/qcom/pil-q6v5-mss.c
+++ b/drivers/soc/qcom/pil-q6v5-mss.c
@@ -291,11 +291,13 @@ static int pil_mss_loadable_init(struct modem_data *drv,
 		ret = regulator_set_voltage(q6->vreg, VDD_MSS_UV,
 						MAX_VDD_MSS_UV);
 		if (ret)
-			dev_err(&pdev->dev, "Failed to set vreg voltage.\n");
+			dev_err(&pdev->dev, "Failed to set vreg voltage(rc:%d)\n",
+									ret);
 
 		ret = regulator_set_load(q6->vreg, 100000);
 		if (ret < 0) {
-			dev_err(&pdev->dev, "Failed to set vreg mode.\n");
+			dev_err(&pdev->dev, "Failed to set vreg mode(rc:%d)\n",
+									ret);
 			return ret;
 		}
 	}
@@ -330,7 +332,7 @@ static int pil_mss_loadable_init(struct modem_data *drv,
 	ret = of_property_read_u32(pdev->dev.of_node,
 					"qcom,pas-id", &drv->pas_id);
 	if (ret)
-		dev_warn(&pdev->dev, "Failed to find the pas_id.\n");
+		dev_info(&pdev->dev, "No pas_id found.\n");
 
 	drv->subsys_desc.pil_mss_memsetup =
 	of_property_read_bool(pdev->dev.of_node, "qcom,pil-mss-memsetup");
diff --git a/drivers/soc/qcom/pil-q6v5.c b/drivers/soc/qcom/pil-q6v5.c
index 3dcfb5abdb23..f8895e8a7b3d 100644
--- a/drivers/soc/qcom/pil-q6v5.c
+++ b/drivers/soc/qcom/pil-q6v5.c
@@ -91,50 +91,53 @@ int pil_q6v5_make_proxy_votes(struct pil_desc *pil)
 
 	ret = of_property_read_u32(pil->dev->of_node, "vdd_cx-voltage", &uv);
 	if (ret) {
-		dev_err(pil->dev, "missing vdd_cx-voltage property\n");
+		dev_err(pil->dev, "missing vdd_cx-voltage property(rc:%d)\n",
+								ret);
 		return ret;
 	}
 
 	ret = clk_prepare_enable(drv->xo);
 	if (ret) {
-		dev_err(pil->dev, "Failed to vote for XO\n");
+		dev_err(pil->dev, "Failed to vote for XO(rc:%d)\n", ret);
 		goto out;
 	}
 
 	ret = clk_prepare_enable(drv->pnoc_clk);
 	if (ret) {
-		dev_err(pil->dev, "Failed to vote for pnoc\n");
+		dev_err(pil->dev, "Failed to vote for pnoc(rc:%d)\n", ret);
 		goto err_pnoc_vote;
 	}
 
 	ret = clk_prepare_enable(drv->qdss_clk);
 	if (ret) {
-		dev_err(pil->dev, "Failed to vote for qdss\n");
+		dev_err(pil->dev, "Failed to vote for qdss(rc:%d)\n", ret);
 		goto err_qdss_vote;
 	}
 
 	ret = regulator_set_voltage(drv->vreg_cx, uv, INT_MAX);
 	if (ret) {
-		dev_err(pil->dev, "Failed to request vdd_cx voltage.\n");
+		dev_err(pil->dev, "Failed to request vdd_cx voltage(rc:%d)\n",
+								ret);
 		goto err_cx_voltage;
 	}
 
 	ret = regulator_set_load(drv->vreg_cx, 100000);
 	if (ret < 0) {
-		dev_err(pil->dev, "Failed to set vdd_cx mode.\n");
+		dev_err(pil->dev, "Failed to set vdd_cx mode(rc:%d)\n", ret);
 		goto err_cx_mode;
 	}
 
 	ret = regulator_enable(drv->vreg_cx);
 	if (ret) {
-		dev_err(pil->dev, "Failed to vote for vdd_cx\n");
+		dev_err(pil->dev, "Failed to vote for vdd_cx(rc:%d)\n", ret);
 		goto err_cx_enable;
 	}
 
 	if (drv->vreg_pll) {
 		ret = regulator_enable(drv->vreg_pll);
 		if (ret) {
-			dev_err(pil->dev, "Failed to vote for vdd_pll\n");
+			dev_err(pil->dev, "Failed to vote for vdd_pll(rc:%d)\n",
+									ret);
 			goto err_vreg_pll;
 		}
 	}
@@ -165,7 +168,8 @@ void pil_q6v5_remove_proxy_votes(struct pil_desc *pil)
 
 	ret = of_property_read_u32(pil->dev->of_node, "vdd_cx-voltage", &uv);
 	if (ret) {
-		dev_err(pil->dev, "missing vdd_cx-voltage property\n");
+		dev_err(pil->dev, "missing vdd_cx-voltage property(rc:%d)\n",
+									ret);
 		return;
 	}
 
@@ -708,13 +712,15 @@ struct q6v5_data *pil_q6v5_init(struct platform_device *pdev)
 			ret = regulator_set_voltage(drv->vreg_pll, vdd_pll,
 							vdd_pll);
 			if (ret) {
-				dev_err(&pdev->dev, "Failed to set vdd_pll voltage.\n");
+				dev_err(&pdev->dev, "Failed to set vdd_pll voltage(rc:%d)\n",
+									ret);
 				return ERR_PTR(ret);
 			}
 
 			ret = regulator_set_load(drv->vreg_pll, 10000);
 			if (ret < 0) {
-				dev_err(&pdev->dev, "Failed to set vdd_pll mode.\n");
+				dev_err(&pdev->dev, "Failed to set vdd_pll mode(rc:%d)\n",
+									ret);
 				return ERR_PTR(ret);
 			}
 		} else
diff --git a/drivers/soc/qcom/subsys-pil-tz.c b/drivers/soc/qcom/subsys-pil-tz.c
index e3e43eee3608..56ca6835fc12 100644
--- a/drivers/soc/qcom/subsys-pil-tz.c
+++ b/drivers/soc/qcom/subsys-pil-tz.c
@@ -339,7 +339,8 @@ static int of_read_regs(struct device *dev, struct reg_info **regs_ref,
 		rc = of_property_read_u32_array(dev->of_node, reg_uV_uA_name,
 					vdd_uV_uA, len);
 		if (rc) {
-			dev_err(dev, "Failed to read uV/uA values\n");
+			dev_err(dev, "Failed to read uV/uA values(rc:%d)\n",
+									rc);
 			return rc;
 		}
 
@@ -423,7 +424,8 @@ static int enable_regulators(struct pil_tz_data *d, struct device *dev,
 			rc = regulator_set_voltage(regs[i].reg,
 					regs[i].uV, INT_MAX);
 			if (rc) {
-				dev_err(dev, "Failed to request voltage.\n");
+				dev_err(dev, "Failed to request voltage(rc:%d)\n",
+									rc);
 				goto err_voltage;
 			}
 		}
@@ -432,7 +434,8 @@ static int enable_regulators(struct pil_tz_data *d, struct device *dev,
 			rc = regulator_set_load(regs[i].reg,
 						regs[i].uA);
 			if (rc < 0) {
-				dev_err(dev, "Failed to set regulator mode\n");
+				dev_err(dev, "Failed to set regulator mode(rc:%d)\n",
+									rc);
 				goto err_mode;
 			}
 		}
@@ -442,7 +445,7 @@ static int enable_regulators(struct pil_tz_data *d, struct device *dev,
 
 		rc = regulator_enable(regs[i].reg);
 		if (rc) {
-			dev_err(dev, "Regulator enable failed\n");
+			dev_err(dev, "Regulator enable failed(rc:%d)\n", rc);
 			goto err_enable;
 		}
 	}
@@ -499,7 +502,7 @@ static int prepare_enable_clocks(struct device *dev, struct clk **clks,
 	for (i = 0; i < clk_count; i++) {
 		rc = clk_prepare_enable(clks[i]);
 		if (rc) {
-			dev_err(dev, "Clock enable failed\n");
+			dev_err(dev, "Clock enable failed(rc:%d)\n", rc);
 			goto err;
 		}
 	}
@@ -541,7 +544,8 @@ static int pil_make_proxy_vote(struct pil_desc *pil)
 	if (d->bus_client) {
 		rc = msm_bus_scale_client_update_request(d->bus_client, 1);
 		if (rc) {
-			dev_err(pil->dev, "bandwidth request failed\n");
+			dev_err(pil->dev, "bandwidth request failed(rc:%d)\n",
+									rc);
 			goto err_bw;
 		}
 	} else
@@ -995,7 +999,8 @@ static int pil_tz_driver_probe(struct platform_device *pdev)
 		rc = of_property_read_u32(pdev->dev.of_node, "qcom,smem-id",
 						&d->smem_id);
 		if (rc) {
-			dev_err(&pdev->dev, "Failed to get the smem_id.\n");
+			dev_err(&pdev->dev, "Failed to get the smem_id(rc:%d)\n",
+									rc);
 			return rc;
 		}
 	}
@@ -1019,7 +1024,8 @@ static int pil_tz_driver_probe(struct platform_device *pdev)
 		rc = of_property_read_u32(pdev->dev.of_node, "qcom,pas-id",
 								&d->pas_id);
 		if (rc) {
-			dev_err(&pdev->dev, "Failed to find the pas_id.\n");
+			dev_err(&pdev->dev, "Failed to find the pas_id(rc:%d)\n",
+									rc);
 			return rc;
 		}
 		scm_pas_init(MSM_BUS_MASTER_CRYPTO_CORE0);