ARM: dts: msm: Add support for ov9282 dual camera support
Add support for ov9282 dual camera sensors with the images from the two sensors stitched together. Change-Id: I4ac5aecca4d7ecc4fb9d04a6fdf64c871f486cbf Signed-off-by: Sathish Ambley <sathishambley@codeaurora.org> Acked-by: Rajesh Bharathwaj <rajeshbharathwaj@codeaurora.org>
This commit is contained in:
Sathish Ambley
Rajesh Bharathwaj
parent
19c7c24c96
commit
2d9e1beb31
2 changed files with 400 additions and 0 deletions
399
arch/arm/boot/dts/qcom/msm8998-camera-sensor-svr20.dtsi
Normal file
399
arch/arm/boot/dts/qcom/msm8998-camera-sensor-svr20.dtsi
Normal file
|
|
@ -0,0 +1,399 @@
|
|||
/*
|
||||
* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
&soc {
|
||||
led_flash0: qcom,camera-flash@0 {
|
||||
cell-index = <0>;
|
||||
compatible = "qcom,camera-flash";
|
||||
qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;
|
||||
qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;
|
||||
qcom,switch-source = <&pmi8998_switch0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash1: qcom,camera-flash@1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
qcom,flash-source = <&pmi8998_flash2>;
|
||||
qcom,torch-source = <&pmi8998_torch2>;
|
||||
qcom,switch-source = <&pmi8998_switch1>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cci {
|
||||
actuator0: qcom,actuator@0 {
|
||||
cell-index = <0>;
|
||||
reg = <0x0>;
|
||||
compatible = "qcom,actuator";
|
||||
qcom,cci-master = <0>;
|
||||
gpios = <&tlmm 27 0>;
|
||||
qcom,gpio-vaf = <0>;
|
||||
qcom,gpio-req-tbl-num = <0>;
|
||||
qcom,gpio-req-tbl-flags = <0>;
|
||||
qcom,gpio-req-tbl-label = "CAM_VAF";
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_actuator_vaf_active>;
|
||||
pinctrl-1 = <&cam_actuator_vaf_suspend>;
|
||||
};
|
||||
|
||||
actuator1: qcom,actuator@1 {
|
||||
cell-index = <1>;
|
||||
reg = <0x1>;
|
||||
compatible = "qcom,actuator";
|
||||
qcom,cci-master = <1>;
|
||||
gpios = <&tlmm 27 0>;
|
||||
qcom,gpio-vaf = <0>;
|
||||
qcom,gpio-req-tbl-num = <0>;
|
||||
qcom,gpio-req-tbl-flags = <0>;
|
||||
qcom,gpio-req-tbl-label = "CAM_VAF";
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_actuator_vaf_active>;
|
||||
pinctrl-1 = <&cam_actuator_vaf_suspend>;
|
||||
};
|
||||
|
||||
ois0: qcom,ois@0 {
|
||||
cell-index = <0>;
|
||||
reg = <0x0>;
|
||||
compatible = "qcom,ois";
|
||||
qcom,cci-master = <0>;
|
||||
gpios = <&tlmm 27 0>;
|
||||
qcom,gpio-vaf = <0>;
|
||||
qcom,gpio-req-tbl-num = <0>;
|
||||
qcom,gpio-req-tbl-flags = <0>;
|
||||
qcom,gpio-req-tbl-label = "CAM_VAF";
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_actuator_vaf_active>;
|
||||
pinctrl-1 = <&cam_actuator_vaf_suspend>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
eeprom0: qcom,eeprom@0 {
|
||||
cell-index = <0>;
|
||||
reg = <0>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&pm8998_lvs1>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
cam_vdig-supply = <&pm8998_s3>;
|
||||
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
||||
qcom,cam-vreg-min-voltage = <0 3312000 1352000>;
|
||||
qcom,cam-vreg-max-voltage = <0 3600000 1352000>;
|
||||
qcom,cam-vreg-op-mode = <0 80000 105000>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_rear_active
|
||||
&cam_actuator_vaf_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_rear_suspend
|
||||
&cam_actuator_vaf_suspend>;
|
||||
gpios = <&tlmm 13 0>,
|
||||
<&tlmm 30 0>,
|
||||
<&pm8998_gpios 20 0>,
|
||||
<&tlmm 29 0>,
|
||||
<&tlmm 27 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vdig = <2>;
|
||||
qcom,gpio-vana = <3>;
|
||||
qcom,gpio-vaf = <4>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2 3 4>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0",
|
||||
"CAM_VDIG",
|
||||
"CAM_VANA",
|
||||
"CAM_VAF";
|
||||
qcom,sensor-position = <0>;
|
||||
qcom,sensor-mode = <0>;
|
||||
qcom,cci-master = <0>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk0_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk0_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
|
||||
eeprom1: qcom,eeprom@1 {
|
||||
cell-index = <1>;
|
||||
reg = <0x1>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vdig-supply = <&pm8998_lvs1>;
|
||||
cam_vio-supply = <&pm8998_lvs1>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
||||
qcom,cam-vreg-min-voltage = <0 0 3312000>;
|
||||
qcom,cam-vreg-max-voltage = <0 0 3600000>;
|
||||
qcom,cam-vreg-op-mode = <0 0 80000>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk2_active
|
||||
&cam_sensor_rear2_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||||
&cam_sensor_rear2_suspend>;
|
||||
gpios = <&tlmm 15 0>,
|
||||
<&tlmm 9 0>,
|
||||
<&tlmm 8 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vana = <2>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1",
|
||||
"CAM_VANA1";
|
||||
qcom,sensor-position = <0>;
|
||||
qcom,sensor-mode = <0>;
|
||||
qcom,cci-master = <1>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk2_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk2_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
|
||||
eeprom2: qcom,eeprom@2 {
|
||||
cell-index = <2>;
|
||||
reg = <0x2>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&pm8998_lvs1>;
|
||||
/*cam_vana-supply = <&pm8998_l22>;*/
|
||||
cam_vdig-supply = <&pm8998_s3>;
|
||||
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
||||
qcom,cam-vreg-min-voltage =
|
||||
<0 2864000 1352000>;
|
||||
qcom,cam-vreg-max-voltage =
|
||||
<0 2864000 1352000>;
|
||||
qcom,cam-vreg-op-mode = <0 80000 105000>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_front_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_front_suspend>;
|
||||
gpios = <&tlmm 14 0>,
|
||||
<&tlmm 28 0>,
|
||||
<&pm8998_gpios 9 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vdig = <2>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
||||
"CAM_RESET2",
|
||||
"CAM_VDIG";
|
||||
qcom,sensor-position = <1>;
|
||||
qcom,sensor-mode = <0>;
|
||||
qcom,cci-master = <1>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk1_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk1_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
|
||||
qcom,camera@0 {
|
||||
cell-index = <0>;
|
||||
compatible = "qcom,camera";
|
||||
reg = <0x0>;
|
||||
qcom,csiphy-sd-index = <0>;
|
||||
qcom,csid-sd-index = <0>;
|
||||
qcom,mount-angle = <270>;
|
||||
cam_vio-supply = <&pm8998_l8>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
cam_vdig-supply = <&pm8998_l9>;
|
||||
cam_v_custom1-supply = <&pm8998_lvs1>;
|
||||
qcom,cam-vreg-name = "cam_vdig", "cam_vana",
|
||||
"cam_vio", "cam_v_custom1";
|
||||
qcom,cam-vreg-min-voltage = <1808000 3312000 1200000 0>;
|
||||
qcom,cam-vreg-max-voltage = <2960000 3600000 1200000 0>;
|
||||
qcom,cam-vreg-op-mode = <0 80000 105000 0>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_6dofl_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_6dofl_suspend>;
|
||||
gpios = <&tlmm 13 0>,
|
||||
<&tlmm 148 0>,
|
||||
<&tlmm 93 0>,
|
||||
<&tlmm 52 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vana = <2>;
|
||||
qcom,gpio-vdig = <3>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2 3>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0",
|
||||
"CAM_VANA",
|
||||
"CAM_VDIG";
|
||||
qcom,sensor-position = <0>;
|
||||
qcom,sensor-mode = <1>;
|
||||
qcom,cci-master = <0>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk0_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk0_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
|
||||
qcom,camera@1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera";
|
||||
reg = <0x1>;
|
||||
qcom,csiphy-sd-index = <1>;
|
||||
qcom,csid-sd-index = <1>;
|
||||
qcom,mount-angle = <90>;
|
||||
qcom,eeprom-src = <&eeprom1>;
|
||||
qcom,actuator-src = <&actuator1>;
|
||||
cam_vdig-supply = <&pm8998_lvs1>;
|
||||
cam_vio-supply = <&pm8998_lvs1>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
|
||||
qcom,cam-vreg-min-voltage = <0 0 3312000>;
|
||||
qcom,cam-vreg-max-voltage = <0 0 3600000>;
|
||||
qcom,cam-vreg-op-mode = <0 0 80000>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk2_active
|
||||
&cam_sensor_rear2_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||||
&cam_sensor_rear2_suspend>;
|
||||
gpios = <&tlmm 15 0>,
|
||||
<&tlmm 9 0>,
|
||||
<&tlmm 8 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vana = <2>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1",
|
||||
"CAM_VANA1";
|
||||
qcom,sensor-position = <0>;
|
||||
qcom,sensor-mode = <0>;
|
||||
qcom,cci-master = <1>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk2_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk2_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
qcom,camera@2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera";
|
||||
reg = <0x02>;
|
||||
qcom,csiphy-sd-index = <2>;
|
||||
qcom,csid-sd-index = <2>;
|
||||
qcom,mount-angle = <90>;
|
||||
qcom,eeprom-src = <&eeprom2>;
|
||||
qcom,led-flash-src = <&led_flash1>;
|
||||
qcom,actuator-src = <&actuator1>;
|
||||
cam_vio-supply = <&pm8998_lvs1>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
cam_vdig-supply = <&pm8998_s3>;
|
||||
qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
|
||||
qcom,cam-vreg-min-voltage =
|
||||
<0 3312000 1352000>;
|
||||
qcom,cam-vreg-max-voltage =
|
||||
<0 3600000 1352000>;
|
||||
qcom,cam-vreg-op-mode = <0 80000 105000>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_front_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_front_suspend>;
|
||||
gpios = <&tlmm 14 0>,
|
||||
<&tlmm 28 0>,
|
||||
<&pm8998_gpios 9 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vdig = <2>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
|
||||
"CAM_RESET2",
|
||||
"CAM_VDIG";
|
||||
qcom,sensor-position = <1>;
|
||||
qcom,sensor-mode = <0>;
|
||||
qcom,cci-master = <1>;
|
||||
status = "disabled";
|
||||
clocks = <&clock_mmss clk_mclk1_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk1_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
qcom,camera@3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera";
|
||||
reg = <0x3>;
|
||||
qcom,csiphy-sd-index = <0>;
|
||||
qcom,csid-sd-index = <0>;
|
||||
qcom,mount-angle = <270>;
|
||||
cam_vio-supply = <&pm8998_l8>;
|
||||
cam_vana-supply = <&pmi8998_bob>;
|
||||
cam_vdig-supply = <&pm8998_l9>;
|
||||
cam_v_custom1-supply = <&pm8998_lvs1>;
|
||||
qcom,cam-vreg-name = "cam_vdig", "cam_vana",
|
||||
"cam_vio", "cam_v_custom1";
|
||||
qcom,cam-vreg-min-voltage = <1808000 3312000 1200000 0>;
|
||||
qcom,cam-vreg-max-voltage = <2960000 3600000 1200000 0>;
|
||||
qcom,cam-vreg-op-mode = <0 80000 105000 0>;
|
||||
qcom,gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_6dofr_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_6dofr_suspend>;
|
||||
gpios = <&tlmm 13 0>,
|
||||
<&tlmm 149 0>,
|
||||
<&tlmm 93 0>,
|
||||
<&tlmm 52 0>;
|
||||
qcom,gpio-reset = <1>;
|
||||
qcom,gpio-vana = <2>;
|
||||
qcom,gpio-vdig = <3>;
|
||||
qcom,gpio-req-tbl-num = <0 1 2 3>;
|
||||
qcom,gpio-req-tbl-flags = <1 0 0 0>;
|
||||
qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET1",
|
||||
"CAM_VANA1",
|
||||
"CAM_VDIG1";
|
||||
qcom,sensor-position = <1>;
|
||||
qcom,sensor-mode = <1>;
|
||||
qcom,cci-master = <0>;
|
||||
status = "ok";
|
||||
clocks = <&clock_mmss clk_mclk0_clk_src>,
|
||||
<&clock_mmss clk_mmss_camss_mclk0_clk>;
|
||||
clock-names = "cam_src_clk", "cam_clk";
|
||||
qcom,clock-rates = <24000000 0>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&pm8998_gpios {
|
||||
gpio@c800 { /* GPIO 9 - CAMERA SENSOR 2 VDIG */
|
||||
qcom,mode = <1>; /* Output */
|
||||
qcom,pull = <5>; /* No Pull */
|
||||
qcom,vin-sel = <0>; /* VIN1 GPIO_LV */
|
||||
qcom,src-sel = <0>; /* GPIO */
|
||||
qcom,invert = <0>; /* Invert */
|
||||
qcom,master-en = <1>; /* Enable GPIO */
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
gpio@d300 { /* GPIO 20 - CAMERA SENSOR 0 VDIG */
|
||||
qcom,mode = <1>; /* Output */
|
||||
qcom,pull = <5>; /* No Pull */
|
||||
qcom,vin-sel = <1>; /* VIN1 GPIO_MV */
|
||||
qcom,src-sel = <0>; /* GPIO */
|
||||
qcom,invert = <0>; /* Invert */
|
||||
qcom,master-en = <1>; /* Enable GPIO */
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
|
@ -12,6 +12,7 @@
|
|||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "msm8998-svr20-pinctrl.dtsi"
|
||||
#include "msm8998-camera-sensor-svr20.dtsi"
|
||||
&vendor {
|
||||
bluetooth: bt_wcn3990 {
|
||||
compatible = "qca,wcn3990";
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue