From e040f074d49fb6fde93112a2350af5462a494c04 Mon Sep 17 00:00:00 2001 From: Fuqian Huang Date: Fri, 9 Aug 2019 13:35:39 +0800 Subject: [PATCH 01/24] net: tundra: tsi108: use spin_lock_irqsave instead of spin_lock_irq in IRQ context [ Upstream commit 8c25d0887a8bd0e1ca2074ac0c6dff173787a83b ] As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by: Fuqian Huang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/tundra/tsi108_eth.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index 520cf50a3d5a..93fe0da0f15e 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -379,9 +379,10 @@ tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift, static void tsi108_stat_carry(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); + unsigned long flags; u32 carry1, carry2; - spin_lock_irq(&data->misclock); + spin_lock_irqsave(&data->misclock, flags); carry1 = TSI_READ(TSI108_STAT_CARRY1); carry2 = TSI_READ(TSI108_STAT_CARRY2); @@ -449,7 +450,7 @@ static void tsi108_stat_carry(struct net_device *dev) TSI108_STAT_TXPAUSEDROP_CARRY, &data->tx_pause_drop); - spin_unlock_irq(&data->misclock); + spin_unlock_irqrestore(&data->misclock, flags); } /* Read a stat counter atomically with respect to carries. From ffb54f3eae723ca6d7ff34187bdfce91a0d28fce Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sun, 11 Aug 2019 20:13:45 -0700 Subject: [PATCH 02/24] net: tc35815: Explicitly check NET_IP_ALIGN is not zero in tc35815_rx [ Upstream commit 125b7e0949d4e72b15c2b1a1590f8cece985a918 ] clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928db560 ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/toshiba/tc35815.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c index 45ac38d29ed8..868fb6306df0 100644 --- a/drivers/net/ethernet/toshiba/tc35815.c +++ b/drivers/net/ethernet/toshiba/tc35815.c @@ -1528,7 +1528,7 @@ tc35815_rx(struct net_device *dev, int limit) pci_unmap_single(lp->pci_dev, lp->rx_skbs[cur_bd].skb_dma, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) + if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN != 0) memmove(skb->data, skb->data - NET_IP_ALIGN, pkt_len); data = skb_put(skb, pkt_len); From 5694f0d1cb10e9b9faaf47ba5b21f1d664f3a3ba Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 9 Jul 2019 15:44:50 -0700 Subject: [PATCH 03/24] Bluetooth: btqca: Add a short delay before downloading the NVM [ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ] On WCN3990 downloading the NVM sometimes fails with a "TLV response size mismatch" error: [ 174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin [ 174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch It seems the controller needs a short time after downloading the firmware before it is ready for the NVM. A delay as short as 1 ms seems sufficient, make it 10 ms just in case. No event is received during the delay, hence we don't just silently drop an extra event. Signed-off-by: Matthias Kaehlcke Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin --- drivers/bluetooth/btqca.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index 4a6208168850..593fc2a5be0f 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -363,6 +363,9 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate) return err; } + /* Give the controller some time to get ready to receive the NVM */ + msleep(10); + /* Download NVM configuration */ config.type = TLV_TYPE_NVM; snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin", From da5cc03c7562d25a3b66c748b845d9717d6d22b3 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Mon, 12 Aug 2019 16:13:06 -0500 Subject: [PATCH 04/24] ibmveth: Convert multicast list size for little-endian system [ Upstream commit 66cf4710b23ab2adda11155684a2c8826f4fe732 ] The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by: Hangbin Liu Signed-off-by: Thomas Falcon Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/ibm/ibmveth.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 70b3253e7ed5..b46fc37c1a94 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -1555,7 +1555,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) struct net_device *netdev; struct ibmveth_adapter *adapter; unsigned char *mac_addr_p; - unsigned int *mcastFilterSize_p; + __be32 *mcastFilterSize_p; long ret; unsigned long ret_attr; @@ -1577,8 +1577,9 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) return -EINVAL; } - mcastFilterSize_p = (unsigned int *)vio_get_attribute(dev, - VETH_MCAST_FILTER_SIZE, NULL); + mcastFilterSize_p = (__be32 *)vio_get_attribute(dev, + VETH_MCAST_FILTER_SIZE, + NULL); if (!mcastFilterSize_p) { dev_err(&dev->dev, "Can't find VETH_MCAST_FILTER_SIZE " "attribute\n"); @@ -1595,7 +1596,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id) adapter->vdev = dev; adapter->netdev = netdev; - adapter->mcastFilterSize = *mcastFilterSize_p; + adapter->mcastFilterSize = be32_to_cpu(*mcastFilterSize_p); adapter->pool_config = 0; netif_napi_add(netdev, &adapter->napi, ibmveth_poll, 16); From f46a46a9de0f1e005f64ade70336f9505a067a6e Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 31 Jul 2019 20:38:14 +0800 Subject: [PATCH 05/24] gpio: Fix build error of function redefinition [ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ] when do randbuilding, I got this error: In file included from drivers/hwmon/pmbus/ucd9000.c:19:0: ./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/hwmon/pmbus/ucd9000.c:18:0: ./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, ^~~~~~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot Fixes: 964cb341882f ("gpio: move pincontrol calls to ") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- include/linux/gpio.h | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/include/linux/gpio.h b/include/linux/gpio.h index d12b5d566e4b..11555bd821b7 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -229,30 +229,6 @@ static inline int irq_to_gpio(unsigned irq) return -EINVAL; } -static inline int -gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, - unsigned int gpio_offset, unsigned int pin_offset, - unsigned int npins) -{ - WARN_ON(1); - return -EINVAL; -} - -static inline int -gpiochip_add_pingroup_range(struct gpio_chip *chip, - struct pinctrl_dev *pctldev, - unsigned int gpio_offset, const char *pin_group) -{ - WARN_ON(1); - return -EINVAL; -} - -static inline void -gpiochip_remove_pin_ranges(struct gpio_chip *chip) -{ - WARN_ON(1); -} - static inline int devm_gpio_request(struct device *dev, unsigned gpio, const char *label) { From fa6d2679e5cac2fd5ece39c8edb5f503064c5fcd Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Tue, 13 Aug 2019 04:18:52 -0500 Subject: [PATCH 06/24] cxgb4: fix a memory leak bug [ Upstream commit c554336efa9bbc28d6ec14efbee3c7d63c61a34f ] In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by: Wenwen Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c index 4269944c5db5..129d6095749a 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c @@ -2673,8 +2673,10 @@ static ssize_t blocked_fl_write(struct file *filp, const char __user *ubuf, return -ENOMEM; err = bitmap_parse_user(ubuf, count, t, adap->sge.egr_sz); - if (err) + if (err) { + kvfree(t); return err; + } bitmap_copy(adap->sge.blocked_fl, t, adap->sge.egr_sz); t4_free_mem(t); From f6f3170c57da89158b1aa920fc547f481d278480 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Wed, 14 Aug 2019 01:38:39 -0500 Subject: [PATCH 07/24] net: myri10ge: fix memory leaks [ Upstream commit 20fb7c7a39b5c719e2e619673b5f5729ee7d2306 ] In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by: Wenwen Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index 83651ac8ddb9..8ebf3611aba3 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -4114,7 +4114,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) * setup (if available). */ status = myri10ge_request_irq(mgp); if (status != 0) - goto abort_with_firmware; + goto abort_with_slices; myri10ge_free_irq(mgp); /* Save configuration space to be restored if the From 2d28afe7a79edf0f2afd1005d9c2a83fab1a1ab6 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Wed, 14 Aug 2019 13:03:38 -0500 Subject: [PATCH 08/24] cx82310_eth: fix a memory leak bug [ Upstream commit 1eca92eef18719027d394bf1a2d276f43e7cf886 ] In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc(). Then, the execution waits for the firmware to become ready. If the firmware is not ready in time, the execution is terminated. However, the allocated 'dev->partial_data' is not deallocated on this path, leading to a memory leak bug. To fix this issue, free 'dev->partial_data' before returning the error. Signed-off-by: Wenwen Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/usb/cx82310_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c index 947bea81d924..dfbdea22fbad 100644 --- a/drivers/net/usb/cx82310_eth.c +++ b/drivers/net/usb/cx82310_eth.c @@ -175,7 +175,8 @@ static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf) } if (!timeout) { dev_err(&udev->dev, "firmware not ready in time\n"); - return -ETIMEDOUT; + ret = -ETIMEDOUT; + goto err; } /* enable ethernet mode (?) */ From 1b25f01d604ed86d379420f038c91555faef0afc Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Wed, 14 Aug 2019 13:56:43 -0500 Subject: [PATCH 09/24] net: kalmia: fix memory leaks [ Upstream commit f1472cb09f11ddb41d4be84f0650835cb65a9073 ] In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through kmalloc(). In the following execution, if the 'status' returned by kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'. Signed-off-by: Wenwen Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/usb/kalmia.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index 5662babf0583..d385b67258c7 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -117,16 +117,16 @@ kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1) / sizeof(init_msg_1[0]), usb_buf, 24); if (status != 0) - return status; + goto out; memcpy(usb_buf, init_msg_2, 12); status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2) / sizeof(init_msg_2[0]), usb_buf, 28); if (status != 0) - return status; + goto out; memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN); - +out: kfree(usb_buf); return status; } From 62b1e22efe3e6eb629d8a7130bf3e69ec86e6293 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Thu, 15 Aug 2019 15:29:51 -0500 Subject: [PATCH 10/24] wimax/i2400m: fix a memory leak bug [ Upstream commit 44ef3a03252844a8753479b0cea7f29e4a804bdc ] In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup() to hold the original command line options. Then, the options are parsed. However, if an error occurs during the parsing process, 'options_orig' is not deallocated, leading to a memory leak bug. To fix this issue, free 'options_orig' before returning the error. Signed-off-by: Wenwen Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/wimax/i2400m/fw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index c9c711dcd0e6..0e6c665a4de8 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -351,13 +351,15 @@ int i2400m_barker_db_init(const char *_options) } result = i2400m_barker_db_add(barker); if (result < 0) - goto error_add; + goto error_parse_add; } kfree(options_orig); } return 0; +error_parse_add: error_parse: + kfree(options_orig); error_add: kfree(i2400m_barker_db); return result; From bf3583e15956de79e9c37c5ca609434a04f8a224 Mon Sep 17 00:00:00 2001 From: Tho Vu Date: Fri, 16 Aug 2019 17:17:02 +0200 Subject: [PATCH 11/24] ravb: Fix use-after-free ravb_tstamp_skb [ Upstream commit cfef46d692efd852a0da6803f920cc756eea2855 ] When a Tx timestamp is requested, a pointer to the skb is stored in the ravb_tstamp_skb struct. This was done without an skb_get. There exists the possibility that the skb could be freed by ravb_tx_free (when ravb_tx_free is called from ravb_start_xmit) before the timestamp was processed, leading to a use-after-free bug. Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate frees/consumes when a ravb_tstamp_skb struct is freed. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Tho Vu Signed-off-by: Kazuya Mizuguchi Signed-off-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/renesas/ravb_main.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 29d31eb995d7..fedfd94699cb 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1,6 +1,6 @@ /* Renesas Ethernet AVB device driver * - * Copyright (C) 2014-2015 Renesas Electronics Corporation + * Copyright (C) 2014-2019 Renesas Electronics Corporation * Copyright (C) 2015 Renesas Solutions Corp. * Copyright (C) 2015 Cogent Embedded, Inc. * @@ -501,7 +501,10 @@ static void ravb_get_tx_tstamp(struct net_device *ndev) kfree(ts_skb); if (tag == tfa_tag) { skb_tstamp_tx(skb, &shhwtstamps); + dev_consume_skb_any(skb); break; + } else { + dev_kfree_skb_any(skb); } } ravb_write(ndev, ravb_read(ndev, TCCR) | TCCR_TFR, TCCR); @@ -1382,7 +1385,7 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev) DMA_TO_DEVICE); goto unmap; } - ts_skb->skb = skb; + ts_skb->skb = skb_get(skb); ts_skb->tag = priv->ts_skb_tag++; priv->ts_skb_tag &= 0x3ff; list_add_tail(&ts_skb->list, &priv->ts_skb_list); @@ -1514,6 +1517,7 @@ static int ravb_close(struct net_device *ndev) /* Clear the timestamp list */ list_for_each_entry_safe(ts_skb, ts_skb2, &priv->ts_skb_list, list) { list_del(&ts_skb->list); + kfree_skb(ts_skb->skb); kfree(ts_skb); } From 6442370b5642d38c6f9ae8edb71d514aaa6c3dab Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Mon, 19 Aug 2019 16:44:09 +0200 Subject: [PATCH 12/24] Tools: hv: kvp: eliminate 'may be used uninitialized' warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 89eb4d8d25722a0a0194cf7fa47ba602e32a6da7 ] When building hv_kvp_daemon GCC-8.3 complains: hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’: hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct hv_kvp_ipaddr_value *ip_buffer; this seems to be a false positive: we only use ip_buffer when op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE. Silence the warning by initializing ip_buffer to NULL. Signed-off-by: Vitaly Kuznetsov Signed-off-by: Sasha Levin --- tools/hv/hv_kvp_daemon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index fffc7c418459..834008639c4b 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -878,7 +878,7 @@ kvp_get_ip_info(int family, char *if_name, int op, int sn_offset = 0; int error = 0; char *buffer; - struct hv_kvp_ipaddr_value *ip_buffer; + struct hv_kvp_ipaddr_value *ip_buffer = NULL; char cidr_mask[5]; /* /xyz */ int weight; int i; From bc68ba54a2d32e2e3eaf826159b1dc8878cb109b Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Sun, 18 Aug 2019 15:23:01 -0500 Subject: [PATCH 13/24] IB/mlx4: Fix memory leaks [ Upstream commit 5c1baaa82cea2c815a5180ded402a7cd455d1810 ] In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through kcalloc(). However, it is not always deallocated in the following execution if an error occurs, leading to memory leaks. To fix this issue, free 'tun_qp->tx_ring' whenever an error occurs. Signed-off-by: Wenwen Wang Acked-by: Leon Romanovsky Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin --- drivers/infiniband/hw/mlx4/mad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index 199a9cdd0d12..531c985f6fd7 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -1526,8 +1526,6 @@ tx_err: tx_buf_size, DMA_TO_DEVICE); kfree(tun_qp->tx_ring[i].buf.addr); } - kfree(tun_qp->tx_ring); - tun_qp->tx_ring = NULL; i = MLX4_NUM_TUNNEL_BUFS; err: while (i > 0) { @@ -1536,6 +1534,8 @@ err: rx_buf_size, DMA_FROM_DEVICE); kfree(tun_qp->ring[i].addr); } + kfree(tun_qp->tx_ring); + tun_qp->tx_ring = NULL; kfree(tun_qp->ring); tun_qp->ring = NULL; return -ENOMEM; From 1d86cb8d3204337e1853b84d69ea0f30dc0ba973 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Fri, 19 Jul 2019 15:32:20 +0100 Subject: [PATCH 14/24] ceph: fix buffer free while holding i_ceph_lock in __ceph_setxattr() [ Upstream commit 86968ef21596515958d5f0a40233d02be78ecec0 ] Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ #437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin --- fs/ceph/xattr.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c index b24275ef97f7..22e5f3432abb 100644 --- a/fs/ceph/xattr.c +++ b/fs/ceph/xattr.c @@ -916,6 +916,7 @@ int __ceph_setxattr(struct dentry *dentry, const char *name, struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_mds_client *mdsc = ceph_sb_to_client(dentry->d_sb)->mdsc; struct ceph_cap_flush *prealloc_cf = NULL; + struct ceph_buffer *old_blob = NULL; int issued; int err; int dirty = 0; @@ -984,13 +985,15 @@ retry: struct ceph_buffer *blob; spin_unlock(&ci->i_ceph_lock); - dout(" preaallocating new blob size=%d\n", required_blob_size); + ceph_buffer_put(old_blob); /* Shouldn't be required */ + dout(" pre-allocating new blob size=%d\n", required_blob_size); blob = ceph_buffer_new(required_blob_size, GFP_NOFS); if (!blob) goto do_sync_unlocked; spin_lock(&ci->i_ceph_lock); + /* prealloc_blob can't be released while holding i_ceph_lock */ if (ci->i_xattrs.prealloc_blob) - ceph_buffer_put(ci->i_xattrs.prealloc_blob); + old_blob = ci->i_xattrs.prealloc_blob; ci->i_xattrs.prealloc_blob = blob; goto retry; } @@ -1006,6 +1009,7 @@ retry: } spin_unlock(&ci->i_ceph_lock); + ceph_buffer_put(old_blob); if (lock_snap_rwsem) up_read(&mdsc->snap_rwsem); if (dirty) From bce83d9ccca56b9ea9b7cd88499681d10d5062ea Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Thu, 22 Aug 2019 13:03:05 +0200 Subject: [PATCH 15/24] KVM: arm/arm64: Only skip MMIO insn once [ Upstream commit 2113c5f62b7423e4a72b890bd479704aa85c81ba ] If after an MMIO exit to userspace a VCPU is immediately run with an immediate_exit request, such as when a signal is delivered or an MMIO emulation completion is needed, then the VCPU completes the MMIO emulation and immediately returns to userspace. As the exit_reason does not get changed from KVM_EXIT_MMIO in these cases we have to be careful not to complete the MMIO emulation again, when the VCPU is eventually run again, because the emulation does an instruction skip (and doing too many skips would be a waste of guest code :-) We need to use additional VCPU state to track if the emulation is complete. As luck would have it, we already have 'mmio_needed', which even appears to be used in this way by other architectures already. Fixes: 0d640732dbeb ("arm64: KVM: Skip MMIO insn after emulation") Acked-by: Mark Rutland Signed-off-by: Andrew Jones Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin --- arch/arm/kvm/mmio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index ae61e2ea7255..d2efc033ef8b 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -98,6 +98,12 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) unsigned int len; int mask; + /* Detect an already handled MMIO return */ + if (unlikely(!vcpu->mmio_needed)) + return 0; + + vcpu->mmio_needed = 0; + if (!run->mmio.is_write) { len = run->mmio.len; if (len > sizeof(unsigned long)) @@ -206,6 +212,7 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; + vcpu->mmio_needed = 1; if (!ret) { /* We handled the access successfully in the kernel. */ From c3083eff1b1b3bdae7389ff0e2fb7ae9423561e4 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Fri, 19 Jul 2019 15:32:19 +0100 Subject: [PATCH 16/24] libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer [ Upstream commit 5c498950f730aa17c5f8a2cdcb903524e4002ed2 ] Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin --- include/linux/ceph/buffer.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/ceph/buffer.h b/include/linux/ceph/buffer.h index 07ca15e76100..dada47a4360f 100644 --- a/include/linux/ceph/buffer.h +++ b/include/linux/ceph/buffer.h @@ -29,7 +29,8 @@ static inline struct ceph_buffer *ceph_buffer_get(struct ceph_buffer *b) static inline void ceph_buffer_put(struct ceph_buffer *b) { - kref_put(&b->kref, ceph_buffer_release); + if (b) + kref_put(&b->kref, ceph_buffer_release); } extern int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end); From c99ad4f20c5b4d550745e1beaeaa24ed2cf873ba Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 3 May 2018 13:09:44 -0500 Subject: [PATCH 17/24] spi: bcm2835aux: ensure interrupts are enabled for shared handler [ Upstream commit bc519d9574618e47a0c788000fb78da95e18d953 ] The BCM2835 AUX SPI has a shared interrupt line (with AUX UART). Downstream fixes this with an AUX irqchip to demux the IRQ sources and a DT change which breaks compatibility with older kernels. The AUX irqchip was already rejected for upstream[1] and the DT change would break working systems if the DTB is updated to a newer one. The latter issue was brought to my attention by Alex Graf. The root cause however is a bug in the shared handler. Shared handlers must check that interrupts are actually enabled before servicing the interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled. [1] https://patchwork.kernel.org/patch/9781221/ Cc: Alexander Graf Cc: Marc Zyngier Cc: Mark Brown Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-spi@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring Reviewed-by: Eric Anholt Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-bcm2835aux.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 7de6f8472a81..6f4c6aa801f1 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -187,6 +187,11 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) struct bcm2835aux_spi *bs = spi_master_get_devdata(master); irqreturn_t ret = IRQ_NONE; + /* IRQ may be shared, so return if our interrupts are disabled */ + if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & + (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) + return ret; + /* check if we have data to read */ while (bs->rx_len && (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & From 5473cd1dbf972ff06d89400d42973eb31c72dec1 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Sat, 30 Mar 2019 09:30:58 +0000 Subject: [PATCH 18/24] spi: bcm2835aux: unifying code between polling and interrupt driven code [ Upstream commit 7188a6f0eee3f1fae5d826cfc6d569657ff950ec ] Sharing more code between polling and interrupt-driven mode. Signed-off-by: Martin Sperl Acked-by: Stefan Wahren Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-bcm2835aux.c | 51 +++++++++++++----------------------- 1 file changed, 18 insertions(+), 33 deletions(-) diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 6f4c6aa801f1..5b2c2b2e1339 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -181,23 +181,13 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs) BCM2835_AUX_SPI_CNTL0_CLEARFIFO); } -static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs) { - struct spi_master *master = dev_id; - struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - irqreturn_t ret = IRQ_NONE; - - /* IRQ may be shared, so return if our interrupts are disabled */ - if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & - (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) - return ret; - /* check if we have data to read */ while (bs->rx_len && (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_RX_EMPTY))) { bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; } /* check if we have data to write */ @@ -206,7 +196,6 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_TX_FULL))) { bcm2835aux_wr_fifo(bs); - ret = IRQ_HANDLED; } /* and check if we have reached "done" */ @@ -214,8 +203,21 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & BCM2835_AUX_SPI_STAT_BUSY))) { bcm2835aux_rd_fifo(bs); - ret = IRQ_HANDLED; } +} + +static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = dev_id; + struct bcm2835aux_spi *bs = spi_master_get_devdata(master); + + /* IRQ may be shared, so return if our interrupts are disabled */ + if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) & + (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE))) + return IRQ_NONE; + + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); /* and if rx_len is 0 then wake up completion and disable spi */ if (!bs->rx_len) { @@ -223,8 +225,7 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) complete(&master->xfer_completion); } - /* and return */ - return ret; + return IRQ_HANDLED; } static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master, @@ -270,7 +271,6 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); unsigned long timeout; - u32 stat; /* configure spi */ bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]); @@ -281,24 +281,9 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master, /* loop until finished the transfer */ while (bs->rx_len) { - /* read status */ - stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT); - /* fill in tx fifo with remaining data */ - if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) { - bcm2835aux_wr_fifo(bs); - continue; - } - - /* read data from fifo for both cases */ - if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) { - bcm2835aux_rd_fifo(bs); - continue; - } - if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) { - bcm2835aux_rd_fifo(bs); - continue; - } + /* do common fifo handling */ + bcm2835aux_spi_transfer_helper(bs); /* there is still data pending to read check the timeout */ if (bs->rx_len && time_after(jiffies, timeout)) { From b2f16660fc8687febdc133f9b5082482f2a280fc Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Sat, 30 Mar 2019 09:30:59 +0000 Subject: [PATCH 19/24] spi: bcm2835aux: remove dangerous uncontrolled read of fifo [ Upstream commit c7de8500fd8ecbb544846dd5f11dca578c3777e1 ] This read of the fifo is a potential candidate for a race condition as the spi transfer is not necessarily finished and so can lead to an early read of the fifo that still misses data. So it has been removed. Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Suggested-by: Hubert Denkmair Signed-off-by: Martin Sperl Acked-by: Stefan Wahren Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-bcm2835aux.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 5b2c2b2e1339..4d233356772a 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -197,13 +197,6 @@ static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs) BCM2835_AUX_SPI_STAT_TX_FULL))) { bcm2835aux_wr_fifo(bs); } - - /* and check if we have reached "done" */ - while (bs->rx_len && - (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & - BCM2835_AUX_SPI_STAT_BUSY))) { - bcm2835aux_rd_fifo(bs); - } } static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id) From e187a57fc653cfc3016875b80f53f78af4eac172 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Sat, 30 Mar 2019 09:31:00 +0000 Subject: [PATCH 20/24] spi: bcm2835aux: fix corruptions for longer spi transfers [ Upstream commit 73b114ee7db1750c0b535199fae383b109bd61d0 ] On long running tests with a mcp2517fd can controller it showed that on rare occations the data read shows corruptions for longer spi transfers. Example of a 22 byte transfer: expected (as captured on logic analyzer): FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b read by the driver: FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may read data from the fifo reliably without any corruption. Surprisingly the only values ever empirically read in BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30. So whenever the mask is not 0 we can read from the fifo in a safe manner. The patch has now been tested intensively and we are no longer able to reproduce the "RX" issue any longer. Fixes: 1ea29b39f4c812ec ("spi: bcm2835aux: add bcm2835 auxiliary spi device...") Reported-by: Hubert Denkmair Signed-off-by: Martin Sperl Acked-by: Stefan Wahren Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-bcm2835aux.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index 4d233356772a..ca655593c5e0 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -183,12 +183,12 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs) static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs) { + u32 stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT); + /* check if we have data to read */ - while (bs->rx_len && - (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) & - BCM2835_AUX_SPI_STAT_RX_EMPTY))) { + for (; bs->rx_len && (stat & BCM2835_AUX_SPI_STAT_RX_LVL); + stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT)) bcm2835aux_rd_fifo(bs); - } /* check if we have data to write */ while (bs->tx_len && From 94eb5357f6d688b364eaf52d4f7fa187102396a7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 7 Sep 2019 14:25:54 -0700 Subject: [PATCH 21/24] Revert "x86/apic: Include the LDR when clearing out APIC registers" [ Upstream commit 950b07c14e8c59444e2359f15fd70ed5112e11a0 ] This reverts commit 558682b5291937a70748d36fd9ba757fb25b99ae. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/ Reported-by: Chris Wilson Acked-by: Thomas Gleixner Cc: Bandan Das Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- arch/x86/kernel/apic/apic.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 80c94fc8ad5a..834d1b5b4355 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1031,10 +1031,6 @@ void clear_local_APIC(void) apic_write(APIC_LVT0, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT1); apic_write(APIC_LVT1, v | APIC_LVT_MASKED); - if (!x2apic_enabled()) { - v = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - apic_write(APIC_LDR, v); - } if (maxlvt >= 4) { v = apic_read(APIC_LVTPC); apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); From e6198d2b4ff0195ebc228a231f96918855ce722f Mon Sep 17 00:00:00 2001 From: Feng Sun Date: Mon, 26 Aug 2019 14:46:04 +0800 Subject: [PATCH 22/24] net: fix skb use after free in netpoll [ Upstream commit 2c1644cf6d46a8267d79ed95cb9b563839346562 ] After commit baeababb5b85d5c4e6c917efe2a1504179438d3b ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by: Feng Sun Signed-off-by: Xiaojun Zhao Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- net/core/netpoll.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 440aa9f6e0a8..0d7c2cc1ff09 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -122,7 +122,7 @@ static void queue_process(struct work_struct *work) txq = netdev_get_tx_queue(dev, q_index); HARD_TX_LOCK(dev, txq, smp_processor_id()); if (netif_xmit_frozen_or_stopped(txq) || - netpoll_start_xmit(skb, dev, txq) != NETDEV_TX_OK) { + !dev_xmit_complete(netpoll_start_xmit(skb, dev, txq))) { skb_queue_head(&npinfo->txq, skb); HARD_TX_UNLOCK(dev, txq); local_irq_restore(flags); @@ -357,7 +357,7 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, HARD_TX_UNLOCK(dev, txq); - if (status == NETDEV_TX_OK) + if (dev_xmit_complete(status)) break; } @@ -374,7 +374,7 @@ void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb, } - if (status != NETDEV_TX_OK) { + if (!dev_xmit_complete(status)) { skb_queue_tail(&npinfo->txq, skb); schedule_delayed_work(&npinfo->tx_work,0); } From 89e0660bc5316acef9a4dc7bf8ec1ffed8a57c8c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 29 Aug 2019 11:17:24 +0800 Subject: [PATCH 23/24] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent [ Upstream commit 3b25528e1e355c803e73aa326ce657b5606cda73 ] The devicetree binding lists the phy phy as optional. As such, the driver should not bail out if it can't find a regulator. Instead it should just skip the remaining regulator related code and continue on normally. Skip the remainder of phy_power_on() if a regulator supply isn't available. This also gets rid of the bogus return code. Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator") Signed-off-by: Chen-Yu Tsai Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 398b08e07149..68a58333bd74 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c @@ -429,10 +429,8 @@ static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable) int ret; struct device *dev = &bsp_priv->pdev->dev; - if (!ldo) { - dev_err(dev, "no regulator found\n"); - return -1; - } + if (!ldo) + return 0; if (enable) { ret = regulator_enable(ldo); From 882f8791e1412d81e5cc7a4c379c73195155b40f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 10 Sep 2019 10:29:50 +0100 Subject: [PATCH 24/24] Linux 4.4.192 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 266c3d7e0120..18889fbbebb1 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 191 +SUBLEVEL = 192 EXTRAVERSION = NAME = Blurry Fish Butt