From 16e03973ae6fe2b2ca78162facdf65a21caecfaa Mon Sep 17 00:00:00 2001 From: Bharathraj Nagaraju Date: Mon, 5 Mar 2018 16:36:19 -0800 Subject: [PATCH] ARM: dts: msm: Configure GPIO98 as the active output for Mizar Configure GPIO98 as active output & drive low. Delete pinctrl property for audio_ext_clk node. Change-Id: Ic5178ff44a89433848bdd1a92bc3e3b122aeeffd Signed-off-by: Bharathraj Nagaraju --- arch/arm/boot/dts/qcom/msm8996-auto-mizar.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/qcom/msm8996-auto-mizar.dts b/arch/arm/boot/dts/qcom/msm8996-auto-mizar.dts index e7af060c0aba..8c750dab8707 100644 --- a/arch/arm/boot/dts/qcom/msm8996-auto-mizar.dts +++ b/arch/arm/boot/dts/qcom/msm8996-auto-mizar.dts @@ -42,6 +42,7 @@ qcom,ntn_avb { qcom,ntn-rc-num = <2>; + pinctrl-0 = <&ntn_clk_sync &ntn2_clk_sync>; }; i2c@75b6000 { /* BLSP8 */ @@ -55,6 +56,10 @@ }; }; + clock_audio: audio_ext_clk { + /delete-property/pinctrl-0; + /delete-property/pinctrl-1; + }; }; &cci { @@ -107,6 +112,20 @@ output-high; }; }; + + ntn2_clk_sync: ntn2_clk_sync { + mux { + pins = "gpio98"; + function = "gpio"; + }; + + config { + pins = "gpio98"; + drive-strength = <8>; /* 8 mA */ + output-low; + bias-pull-down; /* PULL down */ + }; + }; }; &pil_modem {