ARM: dts: add sharp 1080p cmd mode panel support
Add support for the sharp 1080p command mode panel
on 8996. This panel can be selected by using the
oem override command mentioned below:
- fastboot oem select-display-panel
prim:sharp_1080p_cmd:skip
Change-Id: I8dbf7863618cde1a47880d64a867aae80fbd73fc
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
This commit is contained in:
Siddhartha Agrawal
David Keitel
parent
6e6d3a9047
commit
4225cad918
4 changed files with 101 additions and 0 deletions
78
arch/arm/boot/dts/qcom/dsi-panel-sharp-1080p-cmd.dtsi
Normal file
78
arch/arm/boot/dts/qcom/dsi-panel-sharp-1080p-cmd.dtsi
Normal file
|
|
@ -0,0 +1,78 @@
|
|||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
&mdss_mdp {
|
||||
dsi_sharp_1080_cmd: qcom,mdss_dsi_sharp_1080p_cmd {
|
||||
qcom,mdss-dsi-panel-name = "sharp 1080p cmd mode dsi panel";
|
||||
qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
|
||||
qcom,mdss-dsi-panel-framerate = <60>;
|
||||
qcom,mdss-dsi-virtual-channel-id = <0>;
|
||||
qcom,mdss-dsi-stream = <0>;
|
||||
qcom,mdss-dsi-panel-width = <1080>;
|
||||
qcom,mdss-dsi-panel-height = <1920>;
|
||||
qcom,mdss-dsi-h-front-porch = <0>;
|
||||
qcom,mdss-dsi-h-back-porch = <0>;
|
||||
qcom,mdss-dsi-h-pulse-width = <0>;
|
||||
qcom,mdss-dsi-h-sync-skew = <0>;
|
||||
qcom,mdss-dsi-v-back-porch = <0>;
|
||||
qcom,mdss-dsi-v-front-porch = <0>;
|
||||
qcom,mdss-dsi-v-pulse-width = <0>;
|
||||
qcom,mdss-dsi-h-left-border = <0>;
|
||||
qcom,mdss-dsi-h-right-border = <0>;
|
||||
qcom,mdss-dsi-v-top-border = <0>;
|
||||
qcom,mdss-dsi-v-bottom-border = <0>;
|
||||
qcom,mdss-dsi-bpp = <24>;
|
||||
qcom,mdss-dsi-underflow-color = <0xff>;
|
||||
qcom,mdss-dsi-border-color = <0>;
|
||||
qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;
|
||||
qcom,mdss-dsi-on-command = [
|
||||
15 01 00 00 00 00 02 bb 10
|
||||
15 01 00 00 00 00 02 b0 03
|
||||
05 01 00 00 78 00 01 11
|
||||
15 01 00 00 00 00 02 51 ff
|
||||
15 01 00 00 00 00 02 53 24
|
||||
15 01 00 00 00 00 02 ff 23
|
||||
15 01 00 00 00 00 02 08 05
|
||||
15 01 00 00 00 00 02 46 90
|
||||
15 01 00 00 00 00 02 ff 10
|
||||
15 01 00 00 00 00 02 ff f0
|
||||
15 01 00 00 00 00 02 92 01
|
||||
15 01 00 00 00 00 02 ff 10
|
||||
05 01 00 00 28 00 01 29];
|
||||
qcom,mdss-dsi-off-command = [
|
||||
05 01 00 00 10 00 01 28
|
||||
05 01 00 00 40 00 01 10];
|
||||
qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
|
||||
qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
|
||||
qcom,mdss-dsi-h-sync-pulse = <0>;
|
||||
qcom,mdss-dsi-traffic-mode = "burst_mode";
|
||||
qcom,mdss-dsi-bllp-eof-power-mode;
|
||||
qcom,mdss-dsi-bllp-power-mode;
|
||||
qcom,mdss-dsi-lane-0-state;
|
||||
qcom,mdss-dsi-lane-1-state;
|
||||
qcom,mdss-dsi-lane-2-state;
|
||||
qcom,mdss-dsi-lane-3-state;
|
||||
qcom,mdss-dsi-panel-timings = [e7 36 24 00 66 6a 2a 3a 2d 03 04
|
||||
00];
|
||||
qcom,mdss-dsi-t-clk-post = <0x0d>;
|
||||
qcom,mdss-dsi-t-clk-pre = <0x2e>;
|
||||
qcom,mdss-dsi-dma-trigger = "trigger_sw";
|
||||
qcom,mdss-dsi-mdp-trigger = "none";
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_pwm";
|
||||
qcom,mdss-dsi-te-pin-select = <1>;
|
||||
qcom,mdss-dsi-wr-mem-start = <0x2c>;
|
||||
qcom,mdss-dsi-wr-mem-continue = <0x3c>;
|
||||
qcom,mdss-dsi-te-dcs-command = <1>;
|
||||
qcom,mdss-dsi-te-check-enable;
|
||||
qcom,mdss-dsi-te-using-te-pin;
|
||||
};
|
||||
};
|
||||
|
|
@ -477,6 +477,13 @@
|
|||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||||
};
|
||||
|
||||
&dsi_sharp_1080_cmd {
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||||
};
|
||||
|
||||
&pm8994_gpios {
|
||||
gpio@c700 { /* GPIO 8 - WLAN_EN */
|
||||
qcom,mode = <1>; /* Digital output*/
|
||||
|
|
|
|||
|
|
@ -28,6 +28,7 @@
|
|||
#include "dsi-adv7533-1080p.dtsi"
|
||||
#include "dsi-panel-nt35950-dsc-4k-cmd.dtsi"
|
||||
#include "dsi-panel-sharp-dualmipi-1080p-120hz.dtsi"
|
||||
#include "dsi-panel-sharp-1080p-cmd.dtsi"
|
||||
|
||||
&soc {
|
||||
dsi_panel_pwr_supply: dsi_panel_pwr_supply {
|
||||
|
|
@ -224,3 +225,11 @@
|
|||
23 1f 07 09 05 03 04 a0
|
||||
23 19 08 08 05 03 04 a0];
|
||||
};
|
||||
|
||||
&dsi_sharp_1080_cmd {
|
||||
qcom,mdss-dsi-panel-timings-8996 = [23 1f 07 09 05 03 04 a0
|
||||
23 1f 07 09 05 03 04 a0
|
||||
23 1f 07 09 05 03 04 a0
|
||||
23 1f 07 09 05 03 04 a0
|
||||
23 19 08 08 05 03 04 a0];
|
||||
};
|
||||
|
|
|
|||
|
|
@ -378,6 +378,13 @@
|
|||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||||
};
|
||||
|
||||
&dsi_sharp_1080_cmd {
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
qcom,mdss-dsi-bl-max-level = <4095>;
|
||||
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
|
||||
};
|
||||
|
||||
&dsi_dual_nt35597_video {
|
||||
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
|
||||
qcom,mdss-dsi-bl-min-level = <1>;
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue