Automatic merge of 'for-linus' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input

drivers/input/gameport/Kconfig

@@ -68,23 +68,3 @@ config GAMEPORT_CS461X
 	depends on PCI
 
 endif
-
-# Yes, SOUND_GAMEPORT looks a bit odd. Yes, it ends up being turned on
-# in every .config. Please don't touch it. It is here to handle an
-# unusual dependency between GAMEPORT and sound drivers.
-#
-# Some sound drivers call gameport functions. If GAMEPORT is
-# not selected, empty stubs are provided for the functions and all is
-# well.
-# If GAMEPORT is built in, everything is fine.
-# If GAMEPORT is a module, however, it would need to be loaded for the
-# sound driver to be able to link properly. Therefore, the sound
-# driver must be a module as well in that case. Since there's no way
-# to express that directly in Kconfig, we use SOUND_GAMEPORT to
-# express it. SOUND_GAMEPORT boils down to "if GAMEPORT is 'm',
-# anything that depends on SOUND_GAMEPORT must be 'm' as well. if
-# GAMEPORT is 'y' or 'n', it can be anything".
-config SOUND_GAMEPORT
-	tristate
-	default m if GAMEPORT=m
-	default y

drivers/input/joydev.c

@@ -422,7 +422,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct
 			joydev->nkey++;
 		}
 
-	for (i = 0; i < BTN_JOYSTICK - BTN_MISC + 1; i++)
+	for (i = 0; i < BTN_JOYSTICK - BTN_MISC; i++)
 		if (test_bit(i + BTN_MISC, dev->keybit)) {
 			joydev->keymap[i] = joydev->nkey;
 			joydev->keypam[joydev->nkey] = i + BTN_MISC;

drivers/input/mouse/psmouse-base.c

@@ -518,13 +518,16 @@ static int psmouse_probe(struct psmouse *psmouse)
 /*
  * First, we check if it's a mouse. It should send 0x00 or 0x03
  * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
+ * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent
+ * ID queries, probably due to a firmware bug.
  */
 
 	param[0] = 0xa5;
 	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
 		return -1;
 
-	if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
+	if (param[0] != 0x00 && param[0] != 0x03 &&
+	    param[0] != 0x04 && param[0] != 0xff)
 		return -1;
 
 /*
@@ -972,7 +975,7 @@ static int psmouse_set_maxproto(const char *val, struct kernel_param *kp)
 		return -EINVAL;
 
 	if (!strncmp(val, "any", 3)) {
-		*((unsigned int *)kp->arg) = -1UL;
+		*((unsigned int *)kp->arg) = -1U;
 		return 0;
 	}
 

drivers/input/mouse/synaptics.c

@@ -143,39 +143,6 @@ static int synaptics_identify(struct psmouse *psmouse)
 	return -1;
 }
 
-static void print_ident(struct synaptics_data *priv)
-{
-	printk(KERN_INFO "Synaptics Touchpad, model: %ld\n", SYN_ID_MODEL(priv->identity));
-	printk(KERN_INFO " Firmware: %ld.%ld\n", SYN_ID_MAJOR(priv->identity),
-	       SYN_ID_MINOR(priv->identity));
-	if (SYN_MODEL_ROT180(priv->model_id))
-		printk(KERN_INFO " 180 degree mounted touchpad\n");
-	if (SYN_MODEL_PORTRAIT(priv->model_id))
-		printk(KERN_INFO " portrait touchpad\n");
-	printk(KERN_INFO " Sensor: %ld\n", SYN_MODEL_SENSOR(priv->model_id));
-	if (SYN_MODEL_NEWABS(priv->model_id))
-		printk(KERN_INFO " new absolute packet format\n");
-	if (SYN_MODEL_PEN(priv->model_id))
-		printk(KERN_INFO " pen detection\n");
-
-	if (SYN_CAP_EXTENDED(priv->capabilities)) {
-		printk(KERN_INFO " Touchpad has extended capability bits\n");
-		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))
-			printk(KERN_INFO " -> %d multi-buttons, i.e. besides standard buttons\n",
-			       (int)(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)));
-		if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
-			printk(KERN_INFO " -> middle button\n");
-		if (SYN_CAP_FOUR_BUTTON(priv->capabilities))
-			printk(KERN_INFO " -> four buttons\n");
-		if (SYN_CAP_MULTIFINGER(priv->capabilities))
-			printk(KERN_INFO " -> multifinger detection\n");
-		if (SYN_CAP_PALMDETECT(priv->capabilities))
-			printk(KERN_INFO " -> palm detection\n");
-		if (SYN_CAP_PASS_THROUGH(priv->capabilities))
-			printk(KERN_INFO " -> pass-through port\n");
-	}
-}
-
 static int synaptics_query_hardware(struct psmouse *psmouse)
 {
 	int retries = 0;
@@ -666,7 +633,11 @@ int synaptics_init(struct psmouse *psmouse)
 
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
-	print_ident(priv);
+	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+		SYN_ID_MODEL(priv->identity),
+		SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
+		priv->model_id, priv->capabilities, priv->ext_cap);
+
 	set_input_params(&psmouse->dev, priv);
 
 	psmouse->protocol_handler = synaptics_process_byte;

drivers/input/serio/i8042-x86ia64io.h

@@ -88,9 +88,11 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 };
 
 /*
- * Some Fujitsu notebooks are ahving trouble with touhcpads if
+ * Some Fujitsu notebooks are having trouble with touchpads if
  * active multiplexing mode is activated. Luckily they don't have
  * external PS/2 ports so we can safely disable it.
+ * ... apparently some Toshibas don't like MUX mode either and
+ * die horrible death on reboot.
  */
 static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{
@@ -114,6 +116,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
 		},
 	},
+	{
+		.ident = "Fujitsu Lifebook S6230",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
+		},
+	},
 	{
 		.ident = "Fujitsu T70H",
 		.matches = {
@@ -121,6 +130,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
 		},
 	},
+	{
+		.ident = "Toshiba P10",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
+		},
+	},
 	{ }
 };
 
@@ -215,11 +231,15 @@ static struct pnp_driver i8042_pnp_aux_driver = {
 
 static void i8042_pnp_exit(void)
 {
-	if (i8042_pnp_kbd_registered)
+	if (i8042_pnp_kbd_registered) {
+		i8042_pnp_kbd_registered = 0;
 		pnp_unregister_driver(&i8042_pnp_kbd_driver);
+	}
 
-	if (i8042_pnp_aux_registered)
+	if (i8042_pnp_aux_registered) {
+		i8042_pnp_aux_registered = 0;
 		pnp_unregister_driver(&i8042_pnp_aux_driver);
+	}
 }
 
 static int i8042_pnp_init(void)
@@ -227,7 +247,7 @@ static int i8042_pnp_init(void)
 	int result_kbd, result_aux;
 
 	if (i8042_nopnp) {
-		printk("i8042: PNP detection disabled\n");
+		printk(KERN_INFO "i8042: PNP detection disabled\n");
 		return 0;
 	}
 
@@ -241,7 +261,7 @@ static int i8042_pnp_init(void)
 #if defined(__ia64__)
 		return -ENODEV;
 #else
-		printk(KERN_WARNING "PNP: No PS/2 controller found. Probing ports directly.\n");
+		printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
 		return 0;
 #endif
 	}
@@ -265,7 +285,7 @@ static int i8042_pnp_init(void)
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
 	}
 
-	if (result_aux > 0 && !i8042_pnp_aux_irq) {
+	if (!i8042_pnp_aux_irq) {
 		printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %#x\n", i8042_aux_irq);
 		i8042_pnp_aux_irq = i8042_aux_irq;
 	}

drivers/input/serio/i8042.c

@@ -698,6 +698,26 @@ static void i8042_timer_func(unsigned long data)
 	i8042_interrupt(0, NULL, NULL);
 }
 
+static int i8042_ctl_test(void)
+{
+	unsigned char param;
+
+	if (!i8042_reset)
+		return 0;
+
+	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+		return -1;
+	}
+
+	if (param != I8042_RET_CTL_TEST) {
+		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
+			 param, I8042_RET_CTL_TEST);
+		return -1;
+	}
+
+	return 0;
+}
 
 /*
  * i8042_controller init initializes the i8042 controller, and,
@@ -719,21 +739,8 @@ static int i8042_controller_init(void)
 		return -1;
 	}
 
-	if (i8042_reset) {
+	if (i8042_ctl_test())
-
-		unsigned char param;
-
-		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
 		return -1;
-		}
-
-		if (param != I8042_RET_CTL_TEST) {
-			printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-				 param, I8042_RET_CTL_TEST);
-			return -1;
-		}
-	}
 
 /*
  * Save the CTR for restoral on unload / reboot.
@@ -802,15 +809,11 @@ static int i8042_controller_init(void)
  */
 static void i8042_controller_reset(void)
 {
-	unsigned char param;
-
 /*
  * Reset the controller if requested.
  */
 
-	if (i8042_reset)
+	i8042_ctl_test();
-		if (i8042_command(&param, I8042_CMD_CTL_TEST))
-			printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n");
 
 /*
  * Disable MUX mode if present.
@@ -922,8 +925,11 @@ static int i8042_resume(struct device *dev, u32 level)
 	if (level != RESUME_ENABLE)
 		return 0;
 
-	if (i8042_controller_init()) {
+	if (i8042_ctl_test())
-		printk(KERN_ERR "i8042: resume failed\n");
+		return -1;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042: Can't write CTR\n");
 		return -1;
 	}
 

drivers/input/touchscreen/gunze.c

@@ -68,8 +68,7 @@ static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs)
 
 	if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
 		(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
-		gunze->data[10] = 0;
+		printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
-		printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data);
 		return;
 	}
 

include/linux/gameport.h

@@ -67,6 +67,8 @@ int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mo
 void gameport_close(struct gameport *gameport);
 void gameport_rescan(struct gameport *gameport);
 
+#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
+
 void __gameport_register_port(struct gameport *gameport, struct module *owner);
 static inline void gameport_register_port(struct gameport *gameport)
 {
@@ -75,6 +77,29 @@ static inline void gameport_register_port(struct gameport *gameport)
 
 void gameport_unregister_port(struct gameport *gameport);
 
+void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+
+#else
+
+static inline void gameport_register_port(struct gameport *gameport)
+{
+	return;
+}
+
+static inline void gameport_unregister_port(struct gameport *gameport)
+{
+	return;
+}
+
+static inline void gameport_set_phys(struct gameport *gameport,
+				     const char *fmt, ...)
+{
+	return;
+}
+
+#endif
+
 static inline struct gameport *gameport_allocate_port(void)
 {
 	struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL);
@@ -92,9 +117,6 @@ static inline void gameport_set_name(struct gameport *gameport, const char *name
 	strlcpy(gameport->name, name, sizeof(gameport->name));
 }
 
-void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
-	__attribute__ ((format (printf, 2, 3)));
-
 /*
  * Use the following fucntions to manipulate gameport's per-port
  * driver-specific data.

sound/oss/Kconfig

@@ -112,7 +112,7 @@ config SOUND_BCM_CS4297A
 
 config SOUND_ES1370
 	tristate "Ensoniq AudioPCI (ES1370)"
-	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+	depends on SOUND_PRIME!=n && SOUND && PCI
 	help
 	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
 	  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
@@ -125,7 +125,7 @@ config SOUND_ES1370
 
 config SOUND_ES1371
 	tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
-	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+	depends on SOUND_PRIME!=n && SOUND && PCI
 	help
 	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
 	  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -138,7 +138,7 @@ config SOUND_ES1371
 
 config SOUND_ESSSOLO1
 	tristate "ESS Technology Solo1" 
-	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI
+	depends on SOUND_PRIME!=n && SOUND && PCI
 	help
 	  Say Y or M if you have a PCI sound card utilizing the ESS Technology
 	  Solo1 chip. To find out if your sound card uses a
@@ -179,7 +179,7 @@ config SOUND_HARMONY
 
 config SOUND_SONICVIBES
 	tristate "S3 SonicVibes"
-	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+	depends on SOUND_PRIME!=n && SOUND
 	help
 	  Say Y or M if you have a PCI sound card utilizing the S3
 	  SonicVibes chipset. To find out if your sound card uses a
@@ -226,7 +226,7 @@ config SOUND_AU1550_AC97
 
 config SOUND_TRIDENT
 	tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
-	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+	depends on SOUND_PRIME!=n && SOUND
 	---help---
 	  Say Y or M if you have a PCI sound card utilizing the Trident
 	  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -739,7 +739,7 @@ config SOUND_NM256
 
 config SOUND_MAD16
 	tristate "OPTi MAD16 and/or Mozart based cards"
-	depends on SOUND_OSS && SOUND_GAMEPORT
+	depends on SOUND_OSS
 	---help---
 	  Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
 	  82C928 or 82C929 or 82C931) audio interface chip. These chips are