diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index fa176ffb4ad5..8936058a3cce 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -108,6 +108,7 @@ static void irda_usb_close(struct irda_usb_cb *self);
static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs);
static void write_bulk_callback(struct urb *urb, struct pt_regs *regs);
static void irda_usb_receive(struct urb *urb, struct pt_regs *regs);
+static void irda_usb_rx_defer_expired(unsigned long data);
static int irda_usb_net_open(struct net_device *dev);
static int irda_usb_net_close(struct net_device *dev);
static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -677,6 +678,12 @@ static void irda_usb_net_timeout(struct net_device *netdev)
* on the interrupt pipe and hang the Rx URB only when an interrupt is
* received.
* Jean II
+ *
+ * Note : don't read the above as what we are currently doing, but as
+ * something we could do with KC dongle. Also don't forget that the
+ * interrupt pipe is not part of the original standard, so this would
+ * need to be optional...
+ * Jean II
*/
/*------------------------------------------------------------------*/
@@ -704,10 +711,8 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
/* Reinitialize URB */
usb_fill_bulk_urb(urb, self->usbdev,
usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep),
- skb->data, skb->truesize,
+ skb->data, IRDA_SKB_MAX_MTU,
irda_usb_receive, skb);
- /* Note : unlink *must* be synchronous because of the code in
- * irda_usb_net_close() -> free the skb - Jean II */
urb->status = 0;
/* Can be called from irda_usb_receive (irq handler) -> GFP_ATOMIC */
@@ -734,6 +739,7 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
struct irda_skb_cb *cb;
struct sk_buff *newskb;
struct sk_buff *dataskb;
+ struct urb *next_urb;
int docopy;
IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
@@ -755,20 +761,37 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
if (urb->status != 0) {
switch (urb->status) {
case -EILSEQ:
- self->stats.rx_errors++;
self->stats.rx_crc_errors++;
- break;
+ /* Also precursor to a hot-unplug on UHCI. */
+ /* Fallthrough... */
case -ECONNRESET: /* -104 */
- IRDA_DEBUG(0, "%s(), Connection Reset (-104), transfer_flags 0x%04X \n", __FUNCTION__, urb->transfer_flags);
+ /* Random error, if I remember correctly */
/* uhci_cleanup_unlink() is going to kill the Rx
* URB just after we return. No problem, at this
* point the URB will be idle ;-) - Jean II */
- break;
+ case -ESHUTDOWN: /* -108 */
+ /* That's usually a hot-unplug. Submit will fail... */
+ case -ETIMEDOUT: /* -110 */
+ /* Usually precursor to a hot-unplug on OHCI. */
default:
- IRDA_DEBUG(0, "%s(), RX status %d,transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+ self->stats.rx_errors++;
+ IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
break;
}
- goto done;
+ /* If we received an error, we don't want to resubmit the
+ * Rx URB straight away but to give the USB layer a little
+ * bit of breathing room.
+ * We are in the USB thread context, therefore there is a
+ * danger of recursion (new URB we submit fails, we come
+ * back here).
+ * With recent USB stack (2.6.15+), I'm seeing that on
+ * hot unplug of the dongle...
+ * Lowest effective timer is 10ms...
+ * Jean II */
+ self->rx_defer_timer.function = &irda_usb_rx_defer_expired;
+ self->rx_defer_timer.data = (unsigned long) urb;
+ mod_timer(&self->rx_defer_timer, jiffies + (10 * HZ / 1000));
+ return;
}
/* Check for empty frames */
@@ -845,13 +868,45 @@ done:
* idle slot....
* Jean II */
/* Note : with this scheme, we could submit the idle URB before
- * processing the Rx URB. Another time... Jean II */
+ * processing the Rx URB. I don't think it would buy us anything as
+ * we are running in the USB thread context. Jean II */
+ next_urb = self->idle_rx_urb;
- /* Submit the idle URB to replace the URB we've just received */
- irda_usb_submit(self, skb, self->idle_rx_urb);
/* Recycle Rx URB : Now, the idle URB is the present one */
urb->context = NULL;
self->idle_rx_urb = urb;
+
+ /* Submit the idle URB to replace the URB we've just received.
+ * Do it last to avoid race conditions... Jean II */
+ irda_usb_submit(self, skb, next_urb);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * In case of errors, we want the USB layer to have time to recover.
+ * Now, it is time to resubmit ouur Rx URB...
+ */
+static void irda_usb_rx_defer_expired(unsigned long data)
+{
+ struct urb *urb = (struct urb *) data;
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct irda_usb_cb *self;
+ struct irda_skb_cb *cb;
+ struct urb *next_urb;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* Find ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ IRDA_ASSERT(cb != NULL, return;);
+ self = (struct irda_usb_cb *) cb->context;
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* Same stuff as when Rx is done, see above... */
+ next_urb = self->idle_rx_urb;
+ urb->context = NULL;
+ self->idle_rx_urb = urb;
+ irda_usb_submit(self, skb, next_urb);
}
/*------------------------------------------------------------------*/
@@ -990,6 +1045,9 @@ static int irda_usb_net_close(struct net_device *netdev)
/* Stop network Tx queue */
netif_stop_queue(netdev);
+ /* Kill defered Rx URB */
+ del_timer(&self->rx_defer_timer);
+
/* Deallocate all the Rx path buffers (URBs and skb) */
for (i = 0; i < IU_MAX_RX_URBS; i++) {
struct urb *urb = self->rx_urb[i];
@@ -1365,6 +1423,7 @@ static int irda_usb_probe(struct usb_interface *intf,
self = net->priv;
self->netdev = net;
spin_lock_init(&self->lock);
+ init_timer(&self->rx_defer_timer);
/* Create all of the needed urbs */
for (i = 0; i < IU_MAX_RX_URBS; i++) {
@@ -1498,6 +1557,9 @@ static void irda_usb_disconnect(struct usb_interface *intf)
* This will stop/desactivate the Tx path. - Jean II */
self->present = 0;
+ /* Kill defered Rx URB */
+ del_timer(&self->rx_defer_timer);
+
/* We need to have irq enabled to unlink the URBs. That's OK,
* at this point the Tx path is gone - Jean II */
spin_unlock_irqrestore(&self->lock, flags);
@@ -1507,11 +1569,11 @@ static void irda_usb_disconnect(struct usb_interface *intf)
/* Accept no more transmissions */
/*netif_device_detach(self->netdev);*/
netif_stop_queue(self->netdev);
- /* Stop all the receive URBs */
+ /* Stop all the receive URBs. Must be synchronous. */
for (i = 0; i < IU_MAX_RX_URBS; i++)
usb_kill_urb(self->rx_urb[i]);
/* Cancel Tx and speed URB.
- * Toggle flags to make sure it's synchronous. */
+ * Make sure it's synchronous to avoid races. */
usb_kill_urb(self->tx_urb);
usb_kill_urb(self->speed_urb);
}
diff --git a/drivers/net/irda/irda-usb.h b/drivers/net/irda/irda-usb.h
index bd8f66542322..4026af42dd47 100644
--- a/drivers/net/irda/irda-usb.h
+++ b/drivers/net/irda/irda-usb.h
@@ -136,8 +136,6 @@ struct irda_usb_cb {
__u16 bulk_out_mtu; /* Max Tx packet size in bytes */
__u8 bulk_int_ep; /* Interrupt Endpoint assignments */
- wait_queue_head_t wait_q; /* for timeouts */
-
struct urb *rx_urb[IU_MAX_RX_URBS]; /* URBs used to receive data frames */
struct urb *idle_rx_urb; /* Pointer to idle URB in Rx path */
struct urb *tx_urb; /* URB used to send data frames */
@@ -147,17 +145,18 @@ struct irda_usb_cb {
struct net_device_stats stats;
struct irlap_cb *irlap; /* The link layer we are binded to */
struct qos_info qos;
- hashbin_t *tx_list; /* Queued transmit skb's */
char *speed_buff; /* Buffer for speed changes */
struct timeval stamp;
struct timeval now;
- spinlock_t lock; /* For serializing operations */
+ spinlock_t lock; /* For serializing Tx operations */
__u16 xbofs; /* Current xbofs setting */
__s16 new_xbofs; /* xbofs we need to set */
__u32 speed; /* Current speed */
__s32 new_speed; /* speed we need to set */
+
+ struct timer_list rx_defer_timer; /* Wait for Rx error to clear */
};