ARM: dts: msm: add VDD_GFX CPR configurations for msmcobalt v2

Various CPR parameters and the set of supported GPU frequencies
change between MSMCOBALT v1 and v2.  Specify the v2 values for
the VDD_GFX CPR regulator device.

Change-Id: Ia96fdead344e45fa90b57f43c4bf624f90dc5d37
CRs-Fixed: 1054539
Signed-off-by: David Collins <collinsd@codeaurora.org>
This commit is contained in:
David Collins 2016-08-15 17:28:48 -07:00
parent 41bf8c626f
commit 66f962b149

View file

@ -358,6 +358,92 @@
qcom,cpr-scaled-open-loop-voltage-as-ceiling;
};
&gfx_cpr {
compatible = "qcom,cpr4-msmcobalt-v2-mmss-regulator";
};
&gfx_vreg {
regulator-min-microvolt = <1>;
regulator-max-microvolt = <8>;
qcom,cpr-fuse-corners = <4>;
qcom,cpr-fuse-combos = <8>;
qcom,cpr-corners = <8>;
qcom,cpr-corner-fmax-map = <1 3 5 8>;
qcom,cpr-voltage-ceiling =
<616000 676000 740000 800000 828000
884000 952000 1024000>;
qcom,cpr-voltage-floor =
<516000 516000 532000 584000 632000
672000 712000 756000>;
qcom,mem-acc-voltage = <1 1 1 2 2 2 2 2>;
qcom,corner-frequencies =
<180000000 257000000 342000000 414000000
515000000 596000000 670000000 710000000>;
qcom,cpr-target-quotients =
< 0 0 0 0 331 357 0 0
0 0 0 0 0 0 115 0>,
< 0 0 0 0 467 500 0 0
0 0 0 0 0 0 199 0>,
< 0 0 0 0 628 665 0 0
0 0 0 0 0 0 290 0>,
< 0 0 0 0 762 805 0 0
0 0 0 0 0 0 397 0>,
< 0 0 0 0 964 1013 0 0
0 0 1143 0 1138 1055 0 0>,
< 0 0 0 0 0 0 0 0
0 0 1306 0 1289 1168 0 0>,
< 0 0 0 0 0 0 0 0
0 0 1468 0 1429 1256 0 0>,
< 0 0 0 0 0 0 0 0
0 0 0 0 0 1353 0 0>;
qcom,cpr-ro-scaling-factor =
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>,
< 0 0 0 0 3005 3111 0 0
0 0 3487 0 3280 1896 1874 0>;
qcom,cpr-open-loop-voltage-fuse-adjustment =
< 72000 0 0 0>;
qcom,cpr-closed-loop-voltage-adjustment =
< 65000 26000 8000 0
0 0 0 0>;
qcom,cpr-floor-to-ceiling-max-range =
<50000 50000 50000 50000 50000 50000 70000 70000>;
qcom,cpr-fused-closed-loop-voltage-adjustment-map =
<0 0 1 2 3 0 0 4>;
qcom,allow-voltage-interpolation;
qcom,cpr-scaled-open-loop-voltage-as-ceiling;
qcom,cpr-aging-max-voltage-adjustment = <15000>;
qcom,cpr-aging-ref-corner = <8>;
qcom,cpr-aging-ro-scaling-factor = <2950>;
qcom,allow-aging-voltage-adjustment = <0>;
};
&qusb_phy0 {
qcom,qusb-phy-init-seq =
/* <value reg_offset> */