staging: et131x: Remove redundant replica loopback code

A mechanism used to set the phy in loopback mode is not present in the driver, making associated checks and variables redundant. Removing them.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Mark Einon 2011-08-29 18:42:39 +01:00 committed by Greg Kroah-Hartman
parent 4a334d898a
commit 694bd60383
4 changed files with 10 additions and 27 deletions

View file

@ -1,6 +1,6 @@
/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
* 10/100/1000 Base-T Ethernet Driver for the ET1310 and ET131x series MACs
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
@ -149,7 +149,7 @@
* GLOBAL Module of JAGCore Address Mapping
* Located at address 0x0000
*/
struct global_regs { /* Location: */
struct global_regs { /* Location: */
u32 txq_start_addr; /* 0x0000 */
u32 txq_end_addr; /* 0x0004 */
u32 rxq_start_addr; /* 0x0008 */
@ -163,7 +163,7 @@ struct global_regs { /* Location: */
u32 sw_reset; /* 0x0028 */
u32 slv_timer; /* 0x002C */
u32 msi_config; /* 0x0030 */
u32 loopback; /* 0x0034 */
u32 loopback; /* 0x0034 */
u32 watchdog_timer; /* 0x0038 */
};

View file

@ -988,17 +988,6 @@ static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter)
}
if (len) {
if (adapter->replica_phy_loopbk == 1) {
buf = rx_local->fbr[ring_index]->virt[buff_index];
if (memcmp(&buf[6], adapter->addr, ETH_ALEN) == 0) {
if (memcmp(&buf[42], "Replica packet",
ETH_HLEN)) {
adapter->replica_phy_loopbk_passfail = 1;
}
}
}
/* Determine if this is a multicast packet coming in */
if ((word0 & ALCATEL_MULTICAST_PKT) &&
!(word0 & ALCATEL_BROADCAST_PKT)) {

View file

@ -222,10 +222,6 @@ struct et131x_adapter {
/* Rx Memory Variables */
struct rx_ring rx_ring;
/* Loopback specifics */
u8 replica_phy_loopbk; /* Replica Enable */
u8 replica_phy_loopbk_passfail; /* Replica Enable Pass/Fail */
/* Stats */
struct ce_stats stats;

View file

@ -389,17 +389,15 @@ void et131x_isr_handler(struct work_struct *work)
(uint8_t) offsetof(struct mi_regs, isr),
&myisr);
if (!adapter->replica_phy_loopbk) {
et131x_mii_read(adapter,
(uint8_t) offsetof(struct mi_regs, bmsr),
&bmsr_data);
et131x_mii_read(adapter,
(uint8_t) offsetof(struct mi_regs, bmsr),
&bmsr_data);
bmsr_ints = adapter->bmsr ^ bmsr_data;
adapter->bmsr = bmsr_data;
bmsr_ints = adapter->bmsr ^ bmsr_data;
adapter->bmsr = bmsr_data;
/* Do all the cable in / cable out stuff */
et131x_mii_check(adapter, bmsr_data, bmsr_ints);
}
/* Do all the cable in / cable out stuff */
et131x_mii_check(adapter, bmsr_data, bmsr_ints);
}
/* Let's move on to the TxMac */