From 6aa370ab429dd0709b1fe1ef39c281ba019bc652 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Mon, 20 Apr 2015 14:31:44 +0300 Subject: [PATCH] pwm: qpnp: Add dummy interface functions Enable client drivers, which are using these non-standard PWM API's (FB_MSM_MDSS), to be compiled when QPNP PWM is not enabled. Change-Id: Id7add4009591ec4f3bd095b989aa7f8c0169dfa4 Signed-off-by: Ivan T. Ivanov Signed-off-by: Abhijeet Dharmapurikar --- include/linux/qpnp/pwm.h | 217 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 217 insertions(+) create mode 100644 include/linux/qpnp/pwm.h diff --git a/include/linux/qpnp/pwm.h b/include/linux/qpnp/pwm.h new file mode 100644 index 000000000000..020f18b2cc4b --- /dev/null +++ b/include/linux/qpnp/pwm.h @@ -0,0 +1,217 @@ +/* Copyright (c) 2012-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __QPNP_PWM_H__ +#define __QPNP_PWM_H__ + +#include + +/* usec: 19.2M, n=6, m=0, pre=2 */ +#define PM_PWM_PERIOD_MIN 7 +/* 1K, n=9, m=7, pre=6 */ +#define PM_PWM_PERIOD_MAX (384 * USEC_PER_SEC) +#define PM_PWM_LUT_RAMP_STEP_TIME_MAX 499 +#define PM_PWM_MAX_PAUSE_CNT 8191 +/* + * Formula from HSID, + * pause_time (hi/lo) = (pause_code - 1)*(duty_ms) + */ +#define PM_PWM_LUT_PAUSE_MAX \ + ((PM_PWM_MAX_PAUSE_CNT - 1) * PM_PWM_LUT_RAMP_STEP_TIME_MAX) /* ms */ + +/* Flags for Look Up Table */ +#define PM_PWM_LUT_LOOP 0x01 +#define PM_PWM_LUT_RAMP_UP 0x02 +#define PM_PWM_LUT_REVERSE 0x04 +#define PM_PWM_LUT_PAUSE_HI_EN 0x08 +#define PM_PWM_LUT_PAUSE_LO_EN 0x10 + +#define PM_PWM_LUT_NO_TABLE 0x20 +#define PM_PWM_LUT_USE_RAW_VALUE 0x40 + +/* + * PWM frequency/period control + * + * PWM Frequency = ClockFrequency / (N * T) + * or + * PWM Period = Clock Period * (N * T) + * where + * N = 2^9 or 2^6 for 9-bit or 6-bit PWM size + * T = Pre-divide * 2^m, m = 0..7 (exponent) + */ + +/* + * enum pm_pwm_size - PWM bit mode selection + * %PM_PWM_SIZE_6BIT - Select 6 bit mode; 64 levels + * %PM_PWM_SIZE_9BIT - Select 9 bit mode; 512 levels + */ +enum pm_pwm_size { + PM_PWM_SIZE_6BIT = 6, + PM_PWM_SIZE_9BIT = 9, +}; + +/* + * enum pm_pwm_clk - PWM clock selection + * %PM_PWM_CLK_1KHZ - 1KHz clock + * %PM_PWM_CLK_32KHZ - 32KHz clock + * %PM_PWM_CLK_19P2MHZ - 19.2MHz clock + * Note: Here 1KHz = 1024Hz + */ +enum pm_pwm_clk { + PM_PWM_CLK_1KHZ, + PM_PWM_CLK_32KHZ, + PM_PWM_CLK_19P2MHZ, +}; + +/* PWM pre-divider selection */ +enum pm_pwm_pre_div { + PM_PWM_PDIV_2, + PM_PWM_PDIV_3, + PM_PWM_PDIV_5, + PM_PWM_PDIV_6, +}; + +/* + * struct pwm_period_config - PWM period configuration + * @pwm_size: enum pm_pwm_size + * @clk: enum pm_pwm_clk + * @pre_div: enum pm_pwm_pre_div + * @pre_div_exp: exponent of 2 as part of pre-divider: 0..7 + */ +struct pwm_period_config { + enum pm_pwm_size pwm_size; + enum pm_pwm_clk clk; + enum pm_pwm_pre_div pre_div; + int pre_div_exp; +}; + +/* + * struct pwm_duty_cycles - PWM duty cycle info + * duty_pcts - pointer to an array of duty percentage for a pwm period + * num_duty_pcts - total entries in duty_pcts array + * duty_ms - duty cycle time in ms + * start_idx - index in the LUT + */ +struct pwm_duty_cycles { + int *duty_pcts; + int num_duty_pcts; + int duty_ms; + int start_idx; +}; + +/* + * enum pm_pwm_mode - PWM mode selection + * %PM_PWM_MODE_PWM - Select PWM mode + * %PM_PWM_MODE_LPG - Select LPG mode + */ +enum pm_pwm_mode { + PM_PWM_MODE_PWM, + PM_PWM_MODE_LPG, +}; + +/* + * lut_params: Lookup table (LUT) parameters + * @start_idx: start index in lookup table from 0 to MAX-1 + * @idx_len: number of index + * @pause_lo: pause time in millisecond at low index + * @pause_hi: pause time in millisecond at high index + * @ramp_step_ms: time before loading next LUT pattern in millisecond + * @flags: control flags + */ +struct lut_params { + int start_idx; + int idx_len; + int lut_pause_hi; + int lut_pause_lo; + int ramp_step_ms; + int flags; +}; + +#if IS_ENABLED(CONFIG_PWM_QPNP) +int pwm_config_period(struct pwm_device *pwm, + struct pwm_period_config *pwm_p); + +int pwm_config_pwm_value(struct pwm_device *pwm, int pwm_value); + + +int pwm_change_mode(struct pwm_device *pwm, enum pm_pwm_mode mode); + + +int pwm_lut_config(struct pwm_device *pwm, int period_us, + int duty_pct[], struct lut_params lut_params); + +/* + * support microsecond level configuration + */ +int pwm_config_us(struct pwm_device *pwm, + int duty_us, int period_us); + +#else +static inline int pwm_config_period(struct pwm_device *pwm, + struct pwm_period_config *pwm_p) +{ + return -EINVAL; +} + +static inline int pwm_config_pwm_value(struct pwm_device *pwm, int pwm_value) +{ + return -EINVAL; +} + +static inline int pwm_change_mode(struct pwm_device *pwm, enum pm_pwm_mode mode) +{ + return -EINVAL; +} + +static inline int pwm_lut_config(struct pwm_device *pwm, int period_us, + int duty_pct[], struct lut_params lut_params) +{ + return -EINVAL; +} + +static inline int pwm_config_us(struct pwm_device *pwm, + int duty_us, int period_us) +{ + return -EINVAL; +} +#endif + +/* Standard APIs supported */ +/* + * pwm_request - request a PWM device + * @pwm_id: PWM id or channel + * @label: the label to identify the user + */ + +/* + * pwm_free - free a PWM device + * @pwm: the PWM device + */ + +/* + * pwm_config - change a PWM device configuration + * @pwm: the PWM device + * @period_ns: period in nanosecond + * @duty_ns: duty cycle in nanosecond + */ + +/* + * pwm_enable - start a PWM output toggling + * @pwm: the PWM device + */ + +/* + * pwm_disable - stop a PWM output toggling + * @pwm: the PWM device + */ + +#endif /* __QPNP_PWM_H__ */