evie/android_kernel_oneplus_msm8998
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

ARM: dts: msm: Add support for APQ8096proAU v1.1 ADP

Browse source 
Add board support file needed to support ADP APQ8096proAU v1.1.

APQ8096pro v1.1 with Agave is a new automotive development platform
This change is needed for device boot up.

CRs-Fixed: 1070289
Change-Id: I46b4e38415861f5971fda7dc90a4c3eb9051b2ee
Signed-off-by: Venumadhav Cheryala <cvenum@codeaurora.org>
This commit is contained in:
Venumadhav Cheryala 2016-09-21 18:47:17 -07:00 • committed by Gerrit - the friendly Code Review server
parent d455affcc8
commit 6aa8a1d384
2 changed files with 89 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
arch/arm/boot/dts/qcom/Makefile
View file

@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \
msm8996pro-v1.1-pmi8996-pmk8001-cdp.dtb \ msm8996pro-v1.1-pmi8996-pmk8001-cdp.dtb \
msm8996pro-v1.1-pmi8996-pmk8001-mtp.dtb \ msm8996pro-v1.1-pmi8996-pmk8001-mtp.dtb \
apq8096pro-auto-cdp.dtb \ apq8096pro-auto-cdp.dtb \
apq8096pro-v1.1-auto-adp.dtb \
apq8096pro-liquid.dtb \ apq8096pro-liquid.dtb \
apq8096pro-v1.1-auto-cdp.dtb \ apq8096pro-v1.1-auto-cdp.dtb \
msm8996-v3.0-pmi8994-cdp.dtb \ msm8996-v3.0-pmi8994-cdp.dtb \

88
arch/arm/boot/dts/qcom/apq8096pro-v1.1-auto-adp.dts Normal file
View file

@ -0,0 +1,88 @@
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "apq8096pro-v1.1.dtsi"
#include "msm8996-pm8994.dtsi"
#include "msm8996-agave-adp.dtsi"
#include "msm8996pro-auto.dtsi"
/ {
model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP";
compatible = "qcom,apq8096-adp", "qcom,msm8996", "qcom,adp";
qcom,msm-id = <316 0x10001>;
qcom,board-id = <0x02010019 0>;
};
&spi_9 {
status = "ok";
can-controller@0 {
compatible = "renesas,rh850";
reg = <0>;
interrupt-parent = <&tlmm>;
interrupts = <122 0>;
spi-max-frequency = <5000000>;
};
};
&soc {
qcom,msm-ssc-sensors {
status = "disabled";
};
qcom,msm-thermal {
qcom,hotplug-temp = <115>;
qcom,hotplug-temp-hysteresis = <25>;
qcom,therm-reset-temp = <119>;
};
qcom,adv7481@70 {
qcom,cam-vreg-min-voltage = <1300000 0 1800000>;
qcom,cam-vreg-max-voltage = <1300000 0 1800000>;
};
};
&pil_modem {
pinctrl-names = "default";
pinctrl-0 = <&modem_mux>;
};
&slim_msm {
status = "disabled";
};
&pm8994_mpps {
mpp@a500 { /* MPP 6 */
qcom,mode = <1>; /* Digital output */
qcom,output-type = <0>; /* CMOS logic */
qcom,vin-sel = <2>; /* S4 1.8V */
qcom,src-sel = <0>; /* Constant */
qcom,master-en = <1>; /* Enable GPIO */
status = "okay";
};
};
&sdhc_2 {
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
&sdc2_cd_on_sbc>;
};
&i2c_7 {
silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/
status = "disabled";
};
};