diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 728c38c242d6..56fb62b09fc5 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -141,3 +141,4 @@ Version History 1.2.0 Handle creation of arrays that contain failed devices. 1.3.0 Added support for RAID 10 1.3.1 Allow device replacement/rebuild for RAID 10 +1.3.2 Fix/improve redundancy checking for RAID10 diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt new file mode 100644 index 000000000000..623d4e70ae11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4642.txt @@ -0,0 +1,17 @@ +AK4642 I2C transmitter + +This device supports I2C mode only. + +Required properties: + + - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648" + - reg : The chip select number on the I2C bus + +Example: + +&i2c { + ak4648: ak4648@0x12 { + compatible = "asahi-kasei,ak4642"; + reg = <0x12>; + }; +}; diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt index a850fb9c88ea..e2cd1d7539e5 100644 --- a/Documentation/devicetree/bindings/sound/cs4271.txt +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -20,6 +20,18 @@ Optional properties: !RESET pin - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag is enabled. + - cirrus,enable-soft-reset: + The CS4271 requires its LRCLK and MCLK to be stable before its RESET + line is de-asserted. That also means that clocks cannot be changed + without putting the chip back into hardware reset, which also requires + a complete re-initialization of all registers. + + One (undocumented) workaround is to assert and de-assert the PDN bit + in the MODE2 register. This workaround can be enabled with this DT + property. + + Note that this is not needed in case the clocks are stable + throughout the entire runtime of the codec. Examples: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt new file mode 100644 index 000000000000..be35d34e8b26 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt @@ -0,0 +1,51 @@ +NVIDIA Tegra audio complex + +Required properties: +- compatible : "nvidia,tegra-audio-wm9712" +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the WM9712's pins, and the jacks on the board: + + WM9712 pins: + + * MONOOUT + * HPOUTL + * HPOUTR + * LOUT2 + * ROUT2 + * OUT3 + * LINEINL + * LINEINR + * PHONE + * PCBEEP + * MIC1 + * MIC2 + * Mic Bias + + Board connectors: + + * Headphone + * LineIn + * Mic + +- nvidia,ac97-controller : The phandle of the Tegra AC97 controller + + +Example: + +sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Toradex Colibri T20"; + + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + + nvidia,ac97-controller = <&ac97>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt new file mode 100644 index 000000000000..c1454979c1ef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt @@ -0,0 +1,22 @@ +NVIDIA Tegra 20 AC97 controller + +Required properties: +- compatible : "nvidia,tegra20-ac97" +- reg : Should contain AC97 controller registers location and length +- interrupts : Should contain AC97 interrupt +- nvidia,dma-request-selector : The Tegra DMA controller's phandle and + request selector for the AC97 controller +- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number + of the GPIO used to reset the external AC97 codec +- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number + of the GPIO corresponding with the AC97 DAP _FS line +Example: + +ac97@70002000 { + compatible = "nvidia,tegra20-ac97"; + reg = <0x70002000 0x200>; + interrupts = <0 81 0x04>; + nvidia,dma-request-selector = <&apbdma 12>; + nvidia,codec-reset-gpio = <&gpio 170 0>; + nvidia,codec-sync-gpio = <&gpio 120 0>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt index 6fae51c7f766..1ab6bc8404d5 100644 --- a/Documentation/devicetree/bindings/sound/omap-twl4030.txt +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -6,6 +6,52 @@ Required properties: - ti,mcbsp: phandle for the McBSP node - ti,codec: phandle for the twl4030 audio node +Optional properties: +- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl +- ti, jack-det-gpio: Jack detect GPIO +- ti,audio-routing: List of connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + If the routing is not provided all possible connection will be available + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headset Stereophone + * Earpiece Spk + * Handsfree Spk + * Ext Spk + * Main Mic + * Sub Mic + * Headset Mic + * Carkit Mic + * Digital0 Mic + * Digital1 Mic + * Line In + +twl4030 pins: + * HSOL + * HSOR + * EARPIECE + * HFL + * HFR + * PREDRIVEL + * PREDRIVER + * CARKITL + * CARKITR + * MAINMIC + * SUBMIC + * HSMIC + * DIGIMIC0 + * DIGIMIC1 + * CARKITMIC + * AUXL + * AUXR + + * Headset Mic Bias + * Mic Bias 1 /* Used for Main Mic or Digimic0 */ + * Mic Bias 2 /* Used for Sub Mic or Digimic1 */ + Example: sound { diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.txt b/Documentation/devicetree/bindings/sound/renesas,fsi.txt new file mode 100644 index 000000000000..c5be003f413e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.txt @@ -0,0 +1,26 @@ +Renesas FSI + +Required properties: +- compatible : "renesas,sh_fsi2" or "renesas,sh_fsi" +- reg : Should contain the register physical address and length +- interrupts : Should contain FSI interrupt + +- fsia,spdif-connection : FSI is connected by S/PDFI +- fsia,stream-mode-support : FSI supports 16bit stream mode. +- fsia,use-internal-clock : FSI uses internal clock when master mode. + +- fsib,spdif-connection : same as fsia +- fsib,stream-mode-support : same as fsia +- fsib,use-internal-clock : same as fsia + +Example: + +sh_fsi2: sh_fsi2@0xec230000 { + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupts = <0 146 0x4>; + + fsia,spdif-connection; + fsia,stream-mode-support; + fsia,use-internal-clock; +}; diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt b/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt new file mode 100644 index 000000000000..4686646fb122 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt @@ -0,0 +1,14 @@ +Samsung SMDK audio complex + +Required properties: +- compatible : "samsung,smdk-wm8994" +- samsung,i2s-controller: The phandle of the Samsung I2S0 controller +- samsung,audio-codec: The phandle of the WM8994 audio codec +Example: + +sound { + compatible = "samsung,smdk-wm8994"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; +}; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt new file mode 100644 index 000000000000..3070046da2e5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -0,0 +1,63 @@ +* Samsung I2S controller + +Required SoC Specific Properties: + +- compatible : "samsung,i2s-v5" +- reg: physical base address of the controller and length of memory mapped + region. +- dmas: list of DMA controller phandle and DMA request line ordered pairs. +- dma-names: identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + +Optional SoC Specific Properties: + +- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel + support, this flag is enabled. +- samsung,supports-rstclr: This flag should be set if I2S software reset bit + control is required. When this flag is set I2S software reset bit will be + enabled or disabled based on need. +- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA, + then this flag is enabled. +- samsung,idma-addr: Internal DMA register base address of the audio + sub system(used in secondary sound source). + +Required Board Specific Properties: + +- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK + interface lines. The format of the gpio specifier depends on the gpio + controller. + The syntax of samsung gpio specifier is + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [flags and pull up/down] + [drive strength]> + +Example: + +- SoC Specific Portion: + +i2s@03830000 { + compatible = "samsung,i2s-v5"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-secdai; + samsung,idma-addr = <0x03000000>; +}; + +- Board Specific Portion: + +i2s@03830000 { + gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */ + <&gpz 1 2 0 0>, /* I2S_0_CDCLK */ + <&gpz 2 2 0 0>, /* I2S_0_LRCK */ + <&gpz 3 2 0 0>, /* I2S_0_SDI */ + <&gpz 4 2 0 0>, /* I2S_0_SDO[1] */ + <&gpz 5 2 0 0>, /* I2S_0_SDO[2] */ + <&gpz 6 2 0 0>; /* I2S_0_SDO[3] */ +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index e7b98f41fa5f..f47c3f589fd0 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -11,6 +11,12 @@ Optional properties: - gpio-reset - gpio pin number used for codec reset - ai3x-gpio-func - - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality +- ai3x-micbias-vg - MicBias Voltage required. + 1 - MICBIAS output is powered to 2.0V, + 2 - MICBIAS output is powered to 2.5V, + 3 - MICBIAS output is connected to AVDD, + If this node is not mentioned or if the value is incorrect, then MicBias + is powered down. Example: diff --git a/Documentation/devicetree/bindings/sound/wm8962.txt b/Documentation/devicetree/bindings/sound/wm8962.txt new file mode 100644 index 000000000000..dceb3b1c2bb7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8962.txt @@ -0,0 +1,16 @@ +WM8962 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "wlf,wm8962" + + - reg : the I2C address of the device. + +Example: + +codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; +}; diff --git a/Documentation/hid/hid-sensor.txt b/Documentation/hid/hid-sensor.txt old mode 100755 new mode 100644 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 363e348bff9b..6c723811c0a0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. real-time workloads. It can also improve energy efficiency for asymmetric multiprocessors. - rcu_nocbs_poll [KNL,BOOT] + rcu_nocb_poll [KNL,BOOT] Rather than requiring that offloaded CPUs (specified by rcu_nocbs= above) explicitly awaken the corresponding "rcuoN" kthreads, diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 406d82d5d2bb..e540fd67f767 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -57,6 +57,10 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. +Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields + to struct boot_params for for loading bzImage and ramdisk + above 4G in 64bit. + **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -182,7 +186,7 @@ Offset Proto Name Meaning 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not 0235/1 2.10+ min_alignment Minimum alignment, as a power of two -0236/2 N/A pad3 Unused +0236/2 2.12+ xloadflags Boot protocol option flags 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -582,6 +586,27 @@ Protocol: 2.10+ misaligned kernel. Therefore, a loader should typically try each power-of-two alignment from kernel_alignment down to this alignment. +Field name: xloadflags +Type: read +Offset/size: 0x236/2 +Protocol: 2.12+ + + This field is a bitmask. + + Bit 0 (read): XLF_KERNEL_64 + - If 1, this kernel has the legacy 64-bit entry point at 0x200. + + Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G + - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G. + + Bit 2 (read): XLF_EFI_HANDOVER_32 + - If 1, the kernel supports the 32-bit EFI handoff entry point + given at handover_offset. + + Bit 3 (read): XLF_EFI_HANDOVER_64 + - If 1, the kernel supports the 64-bit EFI handoff entry point + given at handover_offset + 0x200. + Field name: cmdline_size Type: read Offset/size: 0x238/4 diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt index cf5437deda81..199f453cb4de 100644 --- a/Documentation/x86/zero-page.txt +++ b/Documentation/x86/zero-page.txt @@ -19,6 +19,9 @@ Offset Proto Name Meaning 090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! 0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) 0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends +0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits +0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits +0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits 140/080 ALL edid_info Video mode setup (struct edid_info) 1C0/020 ALL efi_info EFI 32 information (struct efi_info) 1E0/004 ALL alk_mem_k Alternative mem check, in KB @@ -27,6 +30,7 @@ Offset Proto Name Meaning 1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) 1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer (below) +1EF/001 ALL sentinel Used to detect broken bootloaders 290/040 ALL edd_mbr_sig_buffer EDD MBR signatures 2D0/A00 ALL e820_map E820 memory map table (array of struct e820entry) diff --git a/MAINTAINERS b/MAINTAINERS index ff60aac83dca..35a56bcd5e75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE M: Haavard Skinnemoen M: Hans-Christian Egtvedt W: http://www.atmel.com/products/AVR32/ -W: http://avr32linux.org/ +W: http://mirror.egtvedt.no/avr32linux.org/ W: http://avrfreaks.net/ S: Maintained F: arch/avr32/ @@ -2966,7 +2966,7 @@ S: Maintained F: drivers/net/ethernet/i825xx/eexpress.* ETHERNET BRIDGE -M: Stephen Hemminger +M: Stephen Hemminger L: bridge@lists.linux-foundation.org L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net:Bridge @@ -4905,7 +4905,7 @@ S: Maintained MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2) M: Mirko Lindner -M: Stephen Hemminger +M: Stephen Hemminger L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/marvell/sk* @@ -5180,7 +5180,7 @@ S: Supported F: drivers/infiniband/hw/nes/ NETEM NETWORK EMULATOR -M: Stephen Hemminger +M: Stephen Hemminger L: netem@lists.linux-foundation.org S: Maintained F: net/sched/sch_netem.c diff --git a/Makefile b/Makefile index 2d3c92c774fb..08ef9bdb80c7 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 8 SUBLEVEL = 0 -EXTRAVERSION = -rc5 -NAME = Terrified Chipmunk +EXTRAVERSION = -rc7 +NAME = Unicycling Gorilla # *DOCUMENTATION* # To see a list of typical targets execute "make help" diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index e05b18f3c33d..4db9db0a8443 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -49,6 +49,11 @@ compatible = "samsung,s524ad0xd1"; reg = <0x51>; }; + + wm8994: wm8994@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + }; }; i2c@121D0000 { @@ -204,4 +209,25 @@ samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; }; + + i2s0: i2s@03830000 { + gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>, + <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>, + <&gpz 6 2 0 0>; + }; + + i2s1: i2s@12D60000 { + status = "disabled"; + }; + + i2s2: i2s@12D70000 { + status = "disabled"; + }; + + sound { + compatible = "samsung,smdk-wm8994"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&wm8994>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 3acf594ea60b..f50b4e854355 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -211,8 +211,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 5>; /* preliminary */ - rx-dma-channel = <&pdma0 4>; /* preliminary */ + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -221,8 +222,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 5>; /* preliminary */ - rx-dma-channel = <&pdma1 4>; /* preliminary */ + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -231,8 +233,9 @@ compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; }; @@ -269,6 +272,35 @@ #size-cells = <0>; }; + i2s0: i2s@03830000 { + compatible = "samsung,i2s-v5"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-secdai; + samsung,idma-addr = <0x03000000>; + }; + + i2s1: i2s@12D60000 { + compatible = "samsung,i2s-v5"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + }; + + i2s2: i2s@12D70000 { + compatible = "samsung,i2s-v5"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 36ae03a3f5d1..87dfa9026c5b 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -351,6 +351,25 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) irq_set_chained_handler(irq, gic_handle_cascade_irq); } +static u8 gic_get_cpumask(struct gic_chip_data *gic) +{ + void __iomem *base = gic_data_dist_base(gic); + u32 mask, i; + + for (i = mask = 0; i < 32; i += 4) { + mask = readl_relaxed(base + GIC_DIST_TARGET + i); + mask |= mask >> 16; + mask |= mask >> 8; + if (mask) + break; + } + + if (!mask) + pr_crit("GIC CPU mask not found - kernel will fail to boot.\n"); + + return mask; +} + static void __init gic_dist_init(struct gic_chip_data *gic) { unsigned int i; @@ -369,7 +388,9 @@ static void __init gic_dist_init(struct gic_chip_data *gic) /* * Set all global interrupts to this CPU only. */ - cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0); + cpumask = gic_get_cpumask(gic); + cpumask |= cpumask << 8; + cpumask |= cpumask << 16; for (i = 32; i < gic_irqs; i += 4) writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); @@ -400,7 +421,7 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) * Get what the GIC says our CPU mask is. */ BUG_ON(cpu >= NR_GIC_CPU_IF); - cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0); + cpu_mask = gic_get_cpumask(gic); gic_cpu_map[cpu] = cpu_mask; /* diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 73cf03aa981e..1c4df27f9332 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -37,7 +37,7 @@ */ #define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET) #define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000)) -#define TASK_UNMAPPED_BASE (UL(CONFIG_PAGE_OFFSET) / 3) +#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) /* * The maximum size of a 26-bit user space task. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e103c290bc9e..85afb031b676 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -414,7 +414,7 @@ config MACH_EXYNOS4_DT select CPU_EXYNOS4210 select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD select PINCTRL - select PINCTRL_EXYNOS4 + select PINCTRL_EXYNOS select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index e99d3d8f2bcf..ea9e3020972d 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -104,6 +104,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, "exynos-tmu", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000, + "samsung-i2s.0", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000, + "samsung-i2s.1", NULL), + OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000, + "samsung-i2s.2", NULL), {}, }; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 616cb87b6179..69985b06c0da 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -53,17 +53,25 @@ static unsigned long ac97_reset_config[] = { GPIO95_AC97_nRESET, }; -void pxa27x_assert_ac97reset(int reset_gpio, int on) +void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio) { + /* + * This helper function is used to work around a bug in the pxa27x's + * ac97 controller during a warm reset. The configuration of the + * reset_gpio is changed as follows: + * to_gpio == true: configured to generic output gpio and driven high + * to_gpio == false: configured to ac97 controller alt fn AC97_nRESET + */ + if (reset_gpio == 113) - pxa2xx_mfp_config(on ? &ac97_reset_config[0] : - &ac97_reset_config[1], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[0] : + &ac97_reset_config[1], 1); if (reset_gpio == 95) - pxa2xx_mfp_config(on ? &ac97_reset_config[2] : - &ac97_reset_config[3], 1); + pxa2xx_mfp_config(to_gpio ? &ac97_reset_config[2] : + &ac97_reset_config[3], 1); } -EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset); +EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); /* Crystal clock: 13MHz */ #define BASE_CLK 13000000 diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/include/mach/irqs-eb.h index d6b5073692d2..44754230fdcc 100644 --- a/arch/arm/mach-realview/include/mach/irqs-eb.h +++ b/arch/arm/mach-realview/include/mach/irqs-eb.h @@ -115,7 +115,7 @@ /* * Only define NR_IRQS if less than NR_IRQS_EB */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) +#define NR_IRQS_EB (IRQ_EB_GIC_START + 128) #if defined(CONFIG_MACH_REALVIEW_EB) \ && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 99ef190d0909..08294fa9e0d4 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -657,14 +657,8 @@ static struct platform_device lcdc_device = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) static struct sh_fsi_platform_info fsi_info = { - .port_a = { - .flags = SH_FSI_BRS_INV, - }, .port_b = { - .flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_CLK_CPG | + .flags = SH_FSI_CLK_CPG | SH_FSI_FMT_SPDIF, }, }; @@ -692,21 +686,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4643_info = { .name = "AK4643", .card = "FSI2A-AK4643", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4643_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4643_device = { @@ -815,18 +809,18 @@ static struct platform_device lcdc1_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 5353adf6b828..0679ca6bf1f6 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -806,21 +806,21 @@ static struct platform_device fsi_device = { }; /* FSI-WM8978 */ -static struct asoc_simple_dai_init_info fsi_wm8978_init_info = { - .fmt = SND_SOC_DAIFMT_I2S, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 12288000, -}; - static struct asoc_simple_card_info fsi_wm8978_info = { .name = "wm8978", .card = "FSI2A-WM8978", - .cpu_dai = "fsia-dai", .codec = "wm8978.0-001a", .platform = "sh_fsi2", - .codec_dai = "wm8978-hifi", - .init = &fsi_wm8978_init_info, + .daifmt = SND_SOC_DAIFMT_I2S, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "wm8978-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_NB_NF, + .sysclk = 12288000, + }, }; static struct platform_device fsi_wm8978_device = { @@ -832,18 +832,18 @@ static struct platform_device fsi_wm8978_device = { }; /* FSI-HDMI */ -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index c02448d6847f..f41b71e8df3e 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -525,21 +525,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4648_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4648_info = { .name = "AK4648", .card = "FSI2A-AK4648", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4648_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4648_device = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 2fed62f66045..3fd716dae405 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -502,18 +502,18 @@ static struct platform_device hdmi_lcdc_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_hdmi_init_info = { - .cpu_daifmt = SND_SOC_DAIFMT_CBM_CFM, -}; - static struct asoc_simple_card_info fsi2_hdmi_info = { .name = "HDMI", .card = "FSI2B-HDMI", - .cpu_dai = "fsib-dai", .codec = "sh-mobile-hdmi", .platform = "sh_fsi2", - .codec_dai = "sh_mobile_hdmi-hifi", - .init = &fsi2_hdmi_init_info, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "sh_mobile_hdmi-hifi", + }, }; static struct platform_device fsi_hdmi_device = { @@ -858,16 +858,12 @@ static struct platform_device leds_device = { #define IRQ_FSI evt2irq(0x1840) static struct sh_fsi_platform_info fsi_info = { .port_a = { - .flags = SH_FSI_BRS_INV, .tx_id = SHDMA_SLAVE_FSIA_TX, .rx_id = SHDMA_SLAVE_FSIA_RX, }, .port_b = { - .flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_CLK_CPG | - SH_FSI_FMT_SPDIF, + .flags = SH_FSI_CLK_CPG | + SH_FSI_FMT_SPDIF, } }; @@ -896,21 +892,21 @@ static struct platform_device fsi_device = { }, }; -static struct asoc_simple_dai_init_info fsi2_ak4643_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, -}; - static struct asoc_simple_card_info fsi2_ak4643_info = { .name = "AK4643", .card = "FSI2A-AK4643", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4643_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4643_device = { diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 076c26d43864..dda3904dc64c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -640,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, if (is_coherent || nommu()) addr = __alloc_simple_buffer(dev, size, gfp, &page); - else if (gfp & GFP_ATOMIC) + else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); else if (!IS_ENABLED(CONFIG_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index d088afa034e8..71d58ddea9c1 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -19,7 +19,8 @@ #include static unsigned samsung_dmadev_request(enum dma_ch dma_ch, - struct samsung_dma_req *param) + struct samsung_dma_req *param, + struct device *dev, char *ch_name) { dma_cap_mask_t mask; void *filter_param; @@ -33,7 +34,12 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, */ filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)param->dt_dmach_prop : (void *)dma_ch; - return (unsigned)dma_request_channel(mask, pl330_filter, filter_param); + + if (dev->of_node) + return (unsigned)dma_request_slave_channel(dev, ch_name); + else + return (unsigned)dma_request_channel(mask, pl330_filter, + filter_param); } static int samsung_dmadev_release(unsigned ch, void *param) diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h index f5144cdd3001..114178268b75 100644 --- a/arch/arm/plat-samsung/include/plat/dma-ops.h +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -39,7 +39,8 @@ struct samsung_dma_config { }; struct samsung_dma_ops { - unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param); + unsigned (*request)(enum dma_ch ch, struct samsung_dma_req *param, + struct device *dev, char *ch_name); int (*release)(unsigned ch, void *param); int (*config)(unsigned ch, struct samsung_dma_config *param); int (*prepare)(unsigned ch, struct samsung_dma_prep *param); diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index f99448c48d30..0cc40aea3f5a 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -36,7 +36,8 @@ static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, } static unsigned s3c_dma_request(enum dma_ch dma_ch, - struct samsung_dma_req *param) + struct samsung_dma_req *param, + struct device *dev, char *ch_name) { struct cb_data *data; diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h index aaf5199d8fcb..b3d18f9f3e8d 100644 --- a/arch/avr32/include/asm/dma-mapping.h +++ b/arch/avr32/include/asm/dma-mapping.h @@ -336,4 +336,14 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif /* __ASM_AVR32_DMA_MAPPING_H */ diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index bbf461076a0a..054d9ec57d9d 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -154,4 +154,14 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size, _dma_sync((dma_addr_t)vaddr, size, dir); } +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif /* _BLACKFIN_DMA_MAPPING_H */ diff --git a/arch/c6x/include/asm/dma-mapping.h b/arch/c6x/include/asm/dma-mapping.h index 3c694065030f..88bd0d899bdb 100644 --- a/arch/c6x/include/asm/dma-mapping.h +++ b/arch/c6x/include/asm/dma-mapping.h @@ -89,4 +89,19 @@ extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f)) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h)) +/* Not supported for now */ +static inline int dma_mmap_coherent(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size) +{ + return -EINVAL; +} + +static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size) +{ + return -EINVAL; +} + #endif /* _ASM_C6X_DMA_MAPPING_H */ diff --git a/arch/cris/include/asm/dma-mapping.h b/arch/cris/include/asm/dma-mapping.h index 8588b2ccf854..2f0f654f1b44 100644 --- a/arch/cris/include/asm/dma-mapping.h +++ b/arch/cris/include/asm/dma-mapping.h @@ -158,5 +158,15 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size, { } +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h index dfb811002c64..1746a2b8e6e7 100644 --- a/arch/frv/include/asm/dma-mapping.h +++ b/arch/frv/include/asm/dma-mapping.h @@ -132,4 +132,19 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, flush_write_buffers(); } +/* Not supported for now */ +static inline int dma_mmap_coherent(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size) +{ + return -EINVAL; +} + +static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size) +{ + return -EINVAL; +} + #endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h index 3e6b8445af6a..292805f0762e 100644 --- a/arch/m68k/include/asm/dma-mapping.h +++ b/arch/m68k/include/asm/dma-mapping.h @@ -115,4 +115,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t handle) #include #endif +/* drivers/base/dma-mapping.c */ +extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size); +extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size); + +#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s) +#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s) + #endif /* _M68K_DMA_MAPPING_H */ diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig index d7af29f1fcf0..ba611927749b 100644 --- a/arch/mips/bcm47xx/Kconfig +++ b/arch/mips/bcm47xx/Kconfig @@ -8,8 +8,10 @@ config BCM47XX_SSB select SSB_DRIVER_EXTIF select SSB_EMBEDDED select SSB_B43_PCI_BRIDGE if PCI + select SSB_DRIVER_PCICORE if PCI select SSB_PCICORE_HOSTMODE if PCI select SSB_DRIVER_GPIO + select GPIOLIB default y help Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. @@ -25,6 +27,7 @@ config BCM47XX_BCMA select BCMA_HOST_PCI if PCI select BCMA_DRIVER_PCI_HOSTMODE if PCI select BCMA_DRIVER_GPIO + select GPIOLIB default y help Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 9f883bf76953..33b72144db31 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -30,6 +30,7 @@ * measurement, and debugging facilities. */ +#include #include #include #include @@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter) */ static void fault_in(uint64_t addr, int len) { - volatile char *ptr; - volatile char dummy; + char *ptr; + /* * Adjust addr and length so we get all cache lines even for * small ranges spanning two cache lines. */ len += addr & CVMX_CACHE_LINE_MASK; addr &= ~CVMX_CACHE_LINE_MASK; - ptr = (volatile char *)cvmx_phys_to_ptr(addr); + ptr = cvmx_phys_to_ptr(addr); /* * Invalidate L1 cache to make sure all loads result in data * being in L2. */ CVMX_DCACHE_INVALIDATE; while (len > 0) { - dummy += *ptr; + ACCESS_ONCE(*ptr); len -= CVMX_CACHE_LINE_SIZE; ptr += CVMX_CACHE_LINE_SIZE; } diff --git a/arch/mips/include/asm/dsp.h b/arch/mips/include/asm/dsp.h index e9bfc0813c72..7bfad0520e25 100644 --- a/arch/mips/include/asm/dsp.h +++ b/arch/mips/include/asm/dsp.h @@ -16,7 +16,7 @@ #include #define DSP_DEFAULT 0x00000000 -#define DSP_MASK 0x3ff +#define DSP_MASK 0x3f #define __enable_dsp_hazard() \ do { \ diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h index ab84064283db..33c34adbecfa 100644 --- a/arch/mips/include/asm/inst.h +++ b/arch/mips/include/asm/inst.h @@ -353,6 +353,7 @@ union mips_instruction { struct u_format u_format; struct c_format c_format; struct r_format r_format; + struct p_format p_format; struct f_format f_format; struct ma_format ma_format; struct b_format b_format; diff --git a/arch/mips/include/asm/mach-pnx833x/war.h b/arch/mips/include/asm/mach-pnx833x/war.h index edaa06d9d492..e410df4e1b3a 100644 --- a/arch/mips/include/asm/mach-pnx833x/war.h +++ b/arch/mips/include/asm/mach-pnx833x/war.h @@ -21,4 +21,4 @@ #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */ +#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index c63191055e69..013d5f781263 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp) #else #define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT)) #define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) #endif #define __pgd_offset(address) pgd_index(address) diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild index a1a0452ac185..77d4fb33f75a 100644 --- a/arch/mips/include/uapi/asm/Kbuild +++ b/arch/mips/include/uapi/asm/Kbuild @@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm header-y += auxvec.h header-y += bitsperlong.h +header-y += break.h header-y += byteorder.h header-y += cachectl.h header-y += errno.h diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/uapi/asm/break.h similarity index 100% rename from arch/mips/include/asm/break.h rename to arch/mips/include/uapi/asm/break.h diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 6a2d758dd8e9..83fa1460e294 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -25,6 +25,12 @@ #define MCOUNT_OFFSET_INSNS 4 #endif +/* Arch override because MIPS doesn't need to run this from stop_machine() */ +void arch_ftrace_update_code(int command) +{ + ftrace_modify_all_code(command); +} + /* * Check if the address is in kernel space * @@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code) return 0; } +#ifndef CONFIG_64BIT +static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1, + unsigned int new_code2) +{ + int faulted; + + safe_store_code(new_code1, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + ip += 4; + safe_store_code(new_code2, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + flush_icache_range(ip, ip + 8); /* original ip + 12 */ + return 0; +} +#endif + /* * The details about the calling site of mcount on MIPS * @@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod, * needed. */ new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F; - +#ifdef CONFIG_64BIT return ftrace_modify_code(ip, new); +#else + /* + * On 32 bit MIPS platforms, gcc adds a stack adjust + * instruction in the delay slot after the branch to + * mcount and expects mcount to restore the sp on return. + * This is based on a legacy API and does nothing but + * waste instructions so it's being removed at runtime. + */ + return ftrace_modify_code_2(ip, new, INSN_NOP); +#endif } int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 4c968e7efb74..165867673357 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -46,9 +46,8 @@ PTR_L a5, PT_R9(sp) PTR_L a6, PT_R10(sp) PTR_L a7, PT_R11(sp) - PTR_ADDIU sp, PT_SIZE #else - PTR_ADDIU sp, (PT_SIZE + 8) + PTR_ADDIU sp, PT_SIZE #endif .endm @@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra) .globl _mcount _mcount: b ftrace_stub - nop + addiu sp,sp,8 + + /* When tracing is activated, it calls ftrace_caller+8 (aka here) */ lw t1, function_trace_stop bnez t1, ftrace_stub nop diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index eec690af6581..147cec19621d 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v) printk(KERN_WARNING "VPE loader: TC %d is already in use.\n", - t->index); + v->tc->index); return -ENOEXEC; } } else { diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index f36acd1b3808..a7935bf0fecb 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent) #endif /* tell oprofile which irq to use */ - cp0_perfcount_irq = LTQ_PERF_IRQ; + cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ); /* * if the timer irq is not one of the mips irqs we need to diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index dc81ca8dc0dd..288f7954988d 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -21,7 +21,7 @@ void __delay(unsigned long loops) " .set noreorder \n" " .align 3 \n" "1: bnez %0, 1b \n" -#if __SIZEOF_LONG__ == 4 +#if BITS_PER_LONG == 32 " subu %0, 1 \n" #else " dsubu %0, 1 \n" diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index 7657fd21cd3f..cacfd31e8ec9 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr) EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(__iounmap); - -int __virt_addr_valid(const volatile void *kaddr) -{ - return pfn_valid(PFN_DOWN(virt_to_phys(kaddr))); -} -EXPORT_SYMBOL_GPL(__virt_addr_valid); diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c index d9be7540a6be..7e5fe2790d8a 100644 --- a/arch/mips/mm/mmap.c +++ b/arch/mips/mm/mmap.c @@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) return ret; } + +int __virt_addr_valid(const volatile void *kaddr) +{ + return pfn_valid(PFN_DOWN(virt_to_phys(kaddr))); +} +EXPORT_SYMBOL_GPL(__virt_addr_valid); diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c index 4e7f49d3d5a8..c5ce6992ac4c 100644 --- a/arch/mips/netlogic/xlr/setup.c +++ b/arch/mips/netlogic/xlr/setup.c @@ -193,8 +193,11 @@ static void nlm_init_node(void) void __init prom_init(void) { - int i, *argv, *envp; /* passed as 32 bit ptrs */ + int *argv, *envp; /* passed as 32 bit ptrs */ struct psb_info *prom_infop; +#ifdef CONFIG_SMP + int i; +#endif /* truncate to 32 bit and sign extend all args */ argv = (int *)(long)(int)fw_arg1; diff --git a/arch/mips/pci/pci-ar71xx.c b/arch/mips/pci/pci-ar71xx.c index 1552522b8718..6eaa4f2d0e38 100644 --- a/arch/mips/pci/pci-ar71xx.c +++ b/arch/mips/pci/pci-ar71xx.c @@ -24,7 +24,7 @@ #include #define AR71XX_PCI_MEM_BASE 0x10000000 -#define AR71XX_PCI_MEM_SIZE 0x08000000 +#define AR71XX_PCI_MEM_SIZE 0x07000000 #define AR71XX_PCI_WIN0_OFFS 0x10000000 #define AR71XX_PCI_WIN1_OFFS 0x11000000 diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 86d77a666458..c11c75be2d7e 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -21,7 +21,7 @@ #define AR724X_PCI_CTRL_SIZE 0x100 #define AR724X_PCI_MEM_BASE 0x10000000 -#define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_MEM_SIZE 0x04000000 #define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h index c1be4397b1ed..a18abfc558eb 100644 --- a/arch/mn10300/include/asm/dma-mapping.h +++ b/arch/mn10300/include/asm/dma-mapping.h @@ -168,4 +168,19 @@ void dma_cache_sync(void *vaddr, size_t size, mn10300_dcache_flush_inv(); } +/* Not supported for now */ +static inline int dma_mmap_coherent(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size) +{ + return -EINVAL; +} + +static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size) +{ + return -EINVAL; +} + #endif diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 467bbd510eac..106b395688e1 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -238,4 +238,19 @@ void * sba_get_iommu(struct parisc_device *dev); /* At the moment, we panic on error for IOMMU resource exaustion */ #define dma_mapping_error(dev, x) 0 +/* This API cannot be supported on PA-RISC */ +static inline int dma_mmap_coherent(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size) +{ + return -EINVAL; +} + +static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt, + void *cpu_addr, dma_addr_t dma_addr, + size_t size) +{ + return -EINVAL; +} + #endif diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index d22e73e4618b..e514de57a125 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -439,6 +439,8 @@ ret_from_fork: ret_from_kernel_thread: REST_NVGPRS(r1) bl schedule_tail + li r3,0 + stw r3,0(r1) mtlr r14 mr r3,r15 PPC440EP_ERR42 diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index b310a0573625..3d990d3bd8ba 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -664,6 +664,19 @@ resume_kernel: ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b + + /* + * arch_local_irq_restore() from preempt_schedule_irq above may + * enable hard interrupt but we really should disable interrupts + * when we return from the interrupt, and so that we don't get + * interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else + ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ + mtmsrd r10,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ #endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index c470a40b29f5..a7bc7521c064 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; - struct thread_info *backup_current_thread_info = \ - (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); + struct thread_info *backup_current_thread_info; if (user_mode(regs)) return 0; + backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); /* * On Book E and perhaps other processors, singlestep is handled on * the critical exception stack. This causes current_thread_info() @@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs) /* Restore current_thread_info lastly. */ memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); + kfree(backup_current_thread_info); return 1; } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6f6b1cccc916..127361e093f4 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs) set_dec(DECREMENTER_MAX); /* Some implementations of hotplug will get timer interrupts while - * offline, just ignore these + * offline, just ignore these and we also need to set + * decrementers_next_tb as MAX to make sure __check_irq_replay + * don't replay timer interrupt when return, otherwise we'll trap + * here infinitely :( */ - if (!cpu_online(smp_processor_id())) + if (!cpu_online(smp_processor_id())) { + *next_tb = ~(u64)0; return; + } /* Conditionally hard-enable interrupts now that the DEC has been * bumped to its maximum value diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 56585086413a..7443481a315c 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -115,11 +115,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) sldi r29,r5,SID_SHIFT - VPN_SHIFT rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - - /* Calculate hash value for primary slot and store it in r28 */ - rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ - rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ - xor r28,r5,r0 + /* + * Calculate hash value for primary slot and store it in r28 + * r3 = va, r5 = vsid + * r0 = (va >> 12) & ((1ul << (28 - 12)) -1) + */ + rldicl r0,r3,64-12,48 + xor r28,r5,r0 /* hash */ b 4f 3: /* Calc vpn and put it in r29 */ @@ -130,11 +132,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) /* * calculate hash value for primary slot and * store it in r28 for 1T segment + * r3 = va, r5 = vsid */ - rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ - clrldi r5,r5,40 /* vsid & 0xffffff */ - rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */ - xor r28,r28,r5 + sldi r28,r5,25 /* vsid << 25 */ + /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */ + rldicl r0,r3,64-12,36 + xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ @@ -407,11 +410,13 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) */ rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - - /* Calculate hash value for primary slot and store it in r28 */ - rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ - rldicl r0,r3,64-12,48 /* (ea >> 12) & 0xffff */ - xor r28,r5,r0 + /* + * Calculate hash value for primary slot and store it in r28 + * r3 = va, r5 = vsid + * r0 = (va >> 12) & ((1ul << (28 - 12)) -1) + */ + rldicl r0,r3,64-12,48 + xor r28,r5,r0 /* hash */ b 4f 3: /* Calc vpn and put it in r29 */ @@ -426,11 +431,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) /* * Calculate hash value for primary slot and * store it in r28 for 1T segment + * r3 = va, r5 = vsid */ - rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ - clrldi r5,r5,40 /* vsid & 0xffffff */ - rldicl r0,r3,64-12,36 /* (ea >> 12) & 0xfffffff */ - xor r28,r28,r5 + sldi r28,r5,25 /* vsid << 25 */ + /* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */ + rldicl r0,r3,64-12,36 + xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ @@ -752,25 +758,27 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT) or r29,r28,r29 - /* Calculate hash value for primary slot and store it in r28 */ - rldicl r5,r5,0,25 /* vsid & 0x0000007fffffffff */ - rldicl r0,r3,64-16,52 /* (ea >> 16) & 0xfff */ - xor r28,r5,r0 + /* Calculate hash value for primary slot and store it in r28 + * r3 = va, r5 = vsid + * r0 = (va >> 16) & ((1ul << (28 - 16)) -1) + */ + rldicl r0,r3,64-16,52 + xor r28,r5,r0 /* hash */ b 4f 3: /* Calc vpn and put it in r29 */ sldi r29,r5,SID_SHIFT_1T - VPN_SHIFT rldicl r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT) or r29,r28,r29 - /* * calculate hash value for primary slot and * store it in r28 for 1T segment + * r3 = va, r5 = vsid */ - rldic r28,r5,25,25 /* (vsid << 25) & 0x7fffffffff */ - clrldi r5,r5,40 /* vsid & 0xffffff */ - rldicl r0,r3,64-16,40 /* (ea >> 16) & 0xffffff */ - xor r28,r28,r5 + sldi r28,r5,25 /* vsid << 25 */ + /* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */ + rldicl r0,r3,64-16,40 + xor r28,r28,r5 /* vsid ^ ( vsid << 25) */ xor r28,r28,r0 /* hash */ /* Convert linux PTE bits into HW equivalents */ diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 315f9495e9b2..f444b94935f5 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1) for (pmc = 0; pmc < 4; pmc++) { psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK << (OPROFILE_MAX_PMC_NUM - pmc) - * OPROFILE_MAX_PMC_NUM); + * OPROFILE_PMSEL_FIELD_WIDTH); psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc) * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL; unit = mmcr1 & (OPROFILE_PM_UNIT_MSK diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index 95d00173029f..890f30e70f98 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -236,6 +236,13 @@ out: static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) { + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state != SYSTEM_BOOTING) + return 0; + if (sdcasr_mapbase) iounmap(sdcasr_mapbase); if (sdcpwr_mapbase) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index c1d7930a82f4..098adbb62660 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma, __pmd_idte(address, pmdp); } +#define __HAVE_ARCH_PMDP_SET_WRPROTECT +static inline void pmdp_set_wrprotect(struct mm_struct *mm, + unsigned long address, pmd_t *pmdp) +{ + pmd_t pmd = *pmdp; + + if (pmd_write(pmd)) { + __pmd_idte(address, pmdp); + set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd)); + } +} + static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot) { pmd_t __pmd; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index a0fa5791cd44..aaff7671101b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -887,12 +887,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -static struct sh_fsi_platform_info fsi_info = { - .port_b = { - .flags = SH_FSI_BRS_INV, - }, -}; - static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -911,25 +905,22 @@ static struct platform_device fsi_device = { .id = 0, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct asoc_simple_dai_init_info fsi_da7210_init_info = { - .fmt = SND_SOC_DAIFMT_I2S, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, }; static struct asoc_simple_card_info fsi_da7210_info = { .name = "DA7210", .card = "FSIB-DA7210", - .cpu_dai = "fsib-dai", .codec = "da7210.0-001a", .platform = "sh_fsi.0", - .codec_dai = "da7210-hifi", - .init = &fsi_da7210_init_info, + .daifmt = SND_SOC_DAIFMT_I2S, + .cpu_dai = { + .name = "fsib-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "da7210-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + }, }; static struct platform_device fsi_da7210_device = { diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 35f6efa3ac0e..4010e63e82d8 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -279,12 +279,6 @@ static struct platform_device ceu1_device = { /* FSI */ /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ -static struct sh_fsi_platform_info fsi_info = { - .port_a = { - .flags = SH_FSI_BRS_INV, - }, -}; - static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -303,26 +297,23 @@ static struct platform_device fsi_device = { .id = 0, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct asoc_simple_dai_init_info fsi2_ak4642_init_info = { - .fmt = SND_SOC_DAIFMT_LEFT_J, - .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, - .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, - .sysclk = 11289600, }; static struct asoc_simple_card_info fsi_ak4642_info = { .name = "AK4642", .card = "FSIA-AK4642", - .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi.0", - .codec_dai = "ak4642-hifi", - .init = &fsi2_ak4642_init_info, + .daifmt = SND_SOC_DAIFMT_LEFT_J, + .cpu_dai = { + .name = "fsia-dai", + .fmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_IB_NF, + }, + .codec_dai = { + .name = "ak4642-hifi", + .fmt = SND_SOC_DAIFMT_CBM_CFM, + .sysclk = 11289600, + }, }; static struct platform_device fsi_ak4642_device = { diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 79795af59810..225543bf45a5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2138,6 +2138,7 @@ config OLPC_XO1_RTC config OLPC_XO1_SCI bool "OLPC XO-1 SCI extras" depends on OLPC && OLPC_XO1_PM + depends on INPUT=y select POWER_SUPPLY select GPIO_CS5535 select MFD_CORE diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index ccce0ed67dde..379814bc41e3 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -71,7 +71,7 @@ GCOV_PROFILE := n $(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@ $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @@ -92,7 +92,7 @@ targets += voffset.h $(obj)/voffset.h: vmlinux FORCE $(call if_changed,voffset) -sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' quiet_cmd_zoffset = ZOFFSET $@ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 18e329ca108e..f8fa41190c35 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params) int i; struct setup_data *data; - data = (struct setup_data *)params->hdr.setup_data; + data = (struct setup_data *)(unsigned long)params->hdr.setup_data; while (data && data->next) - data = (struct setup_data *)data->next; + data = (struct setup_data *)(unsigned long)data->next; status = efi_call_phys5(sys_table->boottime->locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto, @@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params) if (!pci) continue; +#ifdef CONFIG_X86_64 status = efi_call_phys4(pci->attributes, pci, EfiPciIoAttributeOperationGet, 0, &attributes); - +#else + status = efi_call_phys5(pci->attributes, pci, + EfiPciIoAttributeOperationGet, 0, 0, + &attributes); +#endif if (status != EFI_SUCCESS) continue; - if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)) - continue; - if (!pci->romimage || !pci->romsize) continue; @@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params) memcpy(rom->romdata, pci->romimage, pci->romsize); if (data) - data->next = (uint64_t)rom; + data->next = (unsigned long)rom; else - params->hdr.setup_data = (uint64_t)rom; + params->hdr.setup_data = (unsigned long)rom; data = (struct setup_data *)rom; @@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto, * Once we've found a GOP supporting ConOut, * don't bother looking any further. */ + first_gop = gop; if (conout_found) break; - - first_gop = gop; } } diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index aa4aaf1b2380..1e3184f6072f 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -35,11 +35,11 @@ ENTRY(startup_32) #ifdef CONFIG_EFI_STUB jmp preferred_addr - .balign 0x10 /* * We don't need the return address, so set up the stack so - * efi_main() can find its arugments. + * efi_main() can find its arguments. */ +ENTRY(efi_pe_entry) add $0x4, %esp call make_boot_params @@ -50,8 +50,10 @@ ENTRY(startup_32) pushl %eax pushl %esi pushl %ecx + sub $0x4, %esp - .org 0x30,0x90 +ENTRY(efi_stub_entry) + add $0x4, %esp call efi_main cmpl $0, %eax movl %eax, %esi diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 2c4b171eec33..f5d1aaa0dec8 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -201,12 +201,12 @@ ENTRY(startup_64) */ #ifdef CONFIG_EFI_STUB /* - * The entry point for the PE/COFF executable is 0x210, so only - * legacy boot loaders will execute this jmp. + * The entry point for the PE/COFF executable is efi_pe_entry, so + * only legacy boot loaders will execute this jmp. */ jmp preferred_addr - .org 0x210 +ENTRY(efi_pe_entry) mov %rcx, %rdi mov %rdx, %rsi pushq %rdi @@ -218,7 +218,7 @@ ENTRY(startup_64) popq %rsi popq %rdi - .org 0x230,0x90 +ENTRY(efi_stub_entry) call efi_main movq %rax,%rsi cmpq $0,%rax diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 8c132a625b94..944ce595f767 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -21,6 +21,7 @@ #include #include #include +#include #include "boot.h" #include "voffset.h" #include "zoffset.h" @@ -255,6 +256,9 @@ section_table: # header, from the old boot sector. .section ".header", "a" + .globl sentinel +sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ + .globl hdr hdr: setup_sects: .byte 0 /* Filled in by build.c */ @@ -279,7 +283,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x020b # header version number (>= 0x0105) + .word 0x020c # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -297,13 +301,7 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer # flags, unused bits must be zero (RFU) bit within loadflags loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free - .byte LOADED_HIGH + .byte LOADED_HIGH # The kernel is to be loaded high setup_move_size: .word 0x8000 # size to move, when setup is not # loaded at 0x90000. We will move setup @@ -369,7 +367,23 @@ relocatable_kernel: .byte 1 relocatable_kernel: .byte 0 #endif min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment -pad3: .word 0 + +xloadflags: +#ifdef CONFIG_X86_64 +# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ +#else +# define XLF0 0 +#endif +#ifdef CONFIG_EFI_STUB +# ifdef CONFIG_X86_64 +# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ +# else +# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ +# endif +#else +# define XLF23 0 +#endif + .word XLF0 | XLF23 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, #added with boot protocol @@ -397,8 +411,13 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr #define INIT_SIZE VO_INIT_SIZE #endif init_size: .long INIT_SIZE # kernel initialization size -handover_offset: .long 0x30 # offset to the handover +handover_offset: +#ifdef CONFIG_EFI_STUB + .long 0x30 # offset to the handover # protocol entry point +#else + .long 0 +#endif # End of setup header ##################################################### diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 03c0683636b6..96a6c7563538 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -13,7 +13,7 @@ SECTIONS .bstext : { *(.bstext) } .bsdata : { *(.bsdata) } - . = 497; + . = 495; .header : { *(.header) } .entrytext : { *(.entrytext) } .inittext : { *(.inittext) } diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index 4b8e165ee572..94c544650020 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -52,6 +52,10 @@ int is_big_kernel; #define PECOFF_RELOC_RESERVE 0x20 +unsigned long efi_stub_entry; +unsigned long efi_pe_entry; +unsigned long startup_64; + /*----------------------------------------------------------------------*/ static const u32 crctab32[] = { @@ -132,7 +136,7 @@ static void die(const char * str, ...) static void usage(void) { - die("Usage: build setup system [> image]"); + die("Usage: build setup system [zoffset.h] [> image]"); } #ifdef CONFIG_EFI_STUB @@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) */ put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]); -#ifdef CONFIG_X86_32 /* - * Address of entry point. - * - * The EFI stub entry point is +16 bytes from the start of - * the .text section. + * Address of entry point for PE/COFF executable */ - put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]); -#else - /* - * Address of entry point. startup_32 is at the beginning and - * the 64-bit entry point (startup_64) is always 512 bytes - * after. The EFI stub entry point is 16 bytes after that, as - * the first instruction allows legacy loaders to jump over - * the EFI stub initialisation - */ - put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]); -#endif /* CONFIG_X86_32 */ + put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]); update_pecoff_section_header(".text", text_start, text_sz); } #endif /* CONFIG_EFI_STUB */ + +/* + * Parse zoffset.h and find the entry points. We could just #include zoffset.h + * but that would mean tools/build would have to be rebuilt every time. It's + * not as if parsing it is hard... + */ +#define PARSE_ZOFS(p, sym) do { \ + if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \ + sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \ +} while (0) + +static void parse_zoffset(char *fname) +{ + FILE *file; + char *p; + int c; + + file = fopen(fname, "r"); + if (!file) + die("Unable to open `%s': %m", fname); + c = fread(buf, 1, sizeof(buf) - 1, file); + if (ferror(file)) + die("read-error on `zoffset.h'"); + buf[c] = 0; + + p = (char *)buf; + + while (p && *p) { + PARSE_ZOFS(p, efi_stub_entry); + PARSE_ZOFS(p, efi_pe_entry); + PARSE_ZOFS(p, startup_64); + + p = strchr(p, '\n'); + while (p && (*p == '\r' || *p == '\n')) + p++; + } +} + int main(int argc, char ** argv) { unsigned int i, sz, setup_sectors; @@ -241,7 +269,19 @@ int main(int argc, char ** argv) void *kernel; u32 crc = 0xffffffffUL; - if (argc != 3) + /* Defaults for old kernel */ +#ifdef CONFIG_X86_32 + efi_pe_entry = 0x10; + efi_stub_entry = 0x30; +#else + efi_pe_entry = 0x210; + efi_stub_entry = 0x230; + startup_64 = 0x200; +#endif + + if (argc == 4) + parse_zoffset(argv[3]); + else if (argc != 3) usage(); /* Copy the setup code */ @@ -299,6 +339,11 @@ int main(int argc, char ** argv) #ifdef CONFIG_EFI_STUB update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz)); + +#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */ + efi_stub_entry -= 0x200; +#endif + put_unaligned_le32(efi_stub_entry, &buf[0x264]); #endif crc = partial_crc32(buf, i, crc); diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 102ff7cb3e41..142c4ceff112 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -207,7 +207,7 @@ sysexit_from_sys_call: testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz ia32_ret_from_sys_call TRACE_IRQS_ON - sti + ENABLE_INTERRUPTS(CLBR_NONE) movl %eax,%esi /* second arg, syscall return value */ cmpl $-MAX_ERRNO,%eax /* is it an error ? */ jbe 1f @@ -217,7 +217,7 @@ sysexit_from_sys_call: call __audit_syscall_exit movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi - cli + DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz \exit diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 6e8fdf5ad113..28677c55113f 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; +extern unsigned long x86_efi_facility; extern void efi_set_executable(efi_memory_desc_t *md, bool executable); extern int efi_memblock_x86_reserve_range(void); extern void efi_call_phys_prelog(void); diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h index b47c2a82ff15..062921ef34e9 100644 --- a/arch/x86/include/asm/uv/uv.h +++ b/arch/x86/include/asm/uv/uv.h @@ -16,7 +16,7 @@ extern void uv_system_init(void); extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, unsigned long start, - unsigned end, + unsigned long end, unsigned int cpu); #else /* X86_UV */ diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 92862cd90201..c15ddaf90710 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -1,6 +1,31 @@ #ifndef _ASM_X86_BOOTPARAM_H #define _ASM_X86_BOOTPARAM_H +/* setup_data types */ +#define SETUP_NONE 0 +#define SETUP_E820_EXT 1 +#define SETUP_DTB 2 +#define SETUP_PCI 3 + +/* ram_size flags */ +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +/* loadflags */ +#define LOADED_HIGH (1<<0) +#define QUIET_FLAG (1<<5) +#define KEEP_SEGMENTS (1<<6) +#define CAN_USE_HEAP (1<<7) + +/* xloadflags */ +#define XLF_KERNEL_64 (1<<0) +#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) +#define XLF_EFI_HANDOVER_32 (1<<2) +#define XLF_EFI_HANDOVER_64 (1<<3) + +#ifndef __ASSEMBLY__ + #include #include #include @@ -9,12 +34,6 @@ #include #include