evie/android_kernel_oneplus_msm8998
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

devicetree: bindings: Make msm8974-pinctrl documentation match code

Browse source 
The compatible string doesn't have an x in it. Fix it. Also
remove the "qcom" prefix from pins and functions as this binding
uses the generic pinctrl bindings for the pins and functions.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Stephen Boyd 2014-02-26 11:12:23 -08:00 • committed by Linus Walleij
parent e6fae2d03d
commit 893a7d11a1
1 changed files with 7 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
View file

@ -1,7 +1,7 @@
Qualcomm MSM8974 TLMM block Qualcomm MSM8974 TLMM block
Required properties: Required properties:
- compatible: "qcom,msm8x74-pinctrl" - compatible: "qcom,msm8974-pinctrl"
- reg: Should be the base address and length of the TLMM block. - reg: Should be the base address and length of the TLMM block.
- interrupts: Should be the parent IRQ of the TLMM block. - interrupts: Should be the parent IRQ of the TLMM block.
- interrupt-controller: Marks the device node as an interrupt controller. - interrupt-controller: Marks the device node as an interrupt controller.
@ -42,14 +42,14 @@ Non-empty subnodes must specify the 'pins' property.
Note that not all properties are valid for all pins. Note that not all properties are valid for all pins.
Valid values for qcom,pins are: Valid values for pins are:
gpio0-gpio145 gpio0-gpio145
Supports mux, bias and drive-strength Supports mux, bias and drive-strength
sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
Supports bias and drive-strength Supports bias and drive-strength
Valid values for qcom,function are: Valid values for function are:
blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus
(Note that this is not yet the complete list of functions) (Note that this is not yet the complete list of functions)
@ -73,18 +73,18 @@ Example:
uart2_default: uart2_default { uart2_default: uart2_default {
mux { mux {
qcom,pins = "gpio4", "gpio5"; pins = "gpio4", "gpio5";
qcom,function = "blsp_uart2"; function = "blsp_uart2";
}; };
tx { tx {
qcom,pins = "gpio4"; pins = "gpio4";
drive-strength = <4>; drive-strength = <4>;
bias-disable; bias-disable;
}; };
rx { rx {
qcom,pins = "gpio5"; pins = "gpio5";
drive-strength = <2>; drive-strength = <2>;
bias-pull-up; bias-pull-up;
}; };