evie/android_kernel_oneplus_msm8998
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

adv7604: Initialize drive strength to default when using DT

Browse source 
[ Upstream commit da8892d410db224d9a24104529794e6e37e0c100 ]

The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.

Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.

Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.

Fixes: 0e158be0162b ("adv7604: Add DT support")

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Lars-Peter Clausen 2016-11-29 09:23:48 -02:00 • committed by Greg Kroah-Hartman
parent c54d0707aa
commit 8a56b1b25e
1 changed files with 3 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
drivers/media/i2c/adv7604.c
View file

@ -2856,6 +2856,9 @@ static int adv76xx_parse_dt(struct adv76xx_state *state)
state->pdata.alt_data_sat = 1;
state->pdata.op_format_mode_sel = ADV7604_OP_FORMAT_MODE0;
state->pdata.bus_order = ADV7604_BUS_ORDER_RGB;
state->pdata.dr_str_data = ADV76XX_DR_STR_MEDIUM_HIGH;
state->pdata.dr_str_clk = ADV76XX_DR_STR_MEDIUM_HIGH;
state->pdata.dr_str_sync = ADV76XX_DR_STR_MEDIUM_HIGH;
return 0;
}