diff --git a/arch/arm/boot/dts/qcom/apq8998-v2.1-mediabox.dts b/arch/arm/boot/dts/qcom/apq8998-v2.1-mediabox.dts
index 03fa038d9413..bc18fb54400f 100644
--- a/arch/arm/boot/dts/qcom/apq8998-v2.1-mediabox.dts
+++ b/arch/arm/boot/dts/qcom/apq8998-v2.1-mediabox.dts
@@ -1,4 +1,4 @@
-/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2016-2017 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -46,3 +46,31 @@
 		};
 	};
 };
+
+&mdss_dsi {
+	status = "disabled";
+};
+
+&sdhc_2 {
+	vdd-supply = <&pm8998_l21>;
+	qcom,vdd-voltage-level = <2950000 2960000>;
+	qcom,vdd-current-level = <200 800000>;
+
+	vdd-io-supply = <&pm8998_l13>;
+	qcom,vdd-io-voltage-level = <1808000 2960000>;
+	qcom,vdd-io-current-level = <200 22000>;
+
+	pinctrl-names = "active", "sleep";
+	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on
+			&sdc2_cd_on_mediabox>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
+			&sdc2_cd_off_mediabox>;
+
+	qcom,clk-rates = <400000 20000000 25000000
+				50000000 100000000 200000000>;
+	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+
+	cd-gpios = <&tlmm 86 0x1>;
+
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi b/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
index ce3604f4dc3b..19b227f1b60f 100644
--- a/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
@@ -3143,5 +3143,31 @@
 				};
 			};
 		};
+
+		sdc2_cd_on_mediabox: sdc2_cd_on_mediabox {
+			mux {
+				pins = "gpio86";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio86";
+				bias-pull-up;           /* pull up */
+				drive-strength = <2>;   /* 2 MA */
+			};
+		};
+
+		sdc2_cd_off_mediabox: sdc2_cd_off_mediabox {
+			mux {
+				pins = "gpio86";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio86";
+				bias-pull-up;           /* pull up */
+				drive-strength = <2>;   /* 2 MA */
+			};
+		};
 	};
 };