diff --git a/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-cdp.dtsi b/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-cdp.dtsi
index 3ef09569a430..0b8d84766fc4 100644
--- a/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-cdp.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-cdp.dtsi
@@ -12,6 +12,24 @@
  */
 
 &soc {
+	led_flash0: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		qcom,flash-source = <&pm2falcon_flash0 &pm2falcon_flash1>;
+		qcom,torch-source = <&pm2falcon_torch0 &pm2falcon_torch1>;
+		qcom,switch-source = <&pm2falcon_switch0>;
+		status = "ok";
+	};
+
+	led_flash1: qcom,camera-flash@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera-flash";
+		qcom,flash-source = <&pm2falcon_flash2>;
+		qcom,torch-source = <&pm2falcon_torch2>;
+		qcom,switch-source = <&pm2falcon_switch1>;
+		status = "ok";
+	};
+
 	qcom,csiphy@ca34000 {
 		qcom,clock-rates = <0 0 0 0 0 0 384000000 0 0 269333333 0
 			0 384000000 0>;
@@ -164,6 +182,46 @@
 		qcom,clock-rates = <24000000 0>;
 	};
 
+	eeprom2: qcom,eeprom@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&pmfalcon_l11>;
+		cam_vana-supply = <&pm2falcon_bob>;
+		cam_vdig-supply = <&pmfalcon_s5>;
+		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+		qcom,cam-vreg-min-voltage = <0 3300000 1350000>;
+		qcom,cam-vreg-max-voltage = <0 3600000 1350000>;
+		qcom,cam-vreg-op-mode = <0 80000 105000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				 &cam_sensor_front_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				 &cam_sensor_front_suspend>;
+		gpios = <&tlmm 14 0>,
+			<&tlmm 28 0>,
+			<&pmfalcon_gpios 3 0>,
+			<&tlmm 29 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-vdig = <2>;
+		qcom,gpio-vana = <3>;
+		qcom,gpio-req-tbl-num = <0 1 2 3>;
+		qcom,gpio-req-tbl-flags = <1 0 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2",
+					"CAM_VDIG",
+					"CAM_VANA";
+		qcom,sensor-position = <1>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <1>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk1_clk_src>,
+			<&clock_mmss clk_mmss_camss_mclk1_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+		qcom,clock-rates = <24000000 0>;
+	};
+
 	qcom,camera@0 {
 		cell-index = <0>;
 		compatible = "qcom,camera";
@@ -171,6 +229,7 @@
 		qcom,csiphy-sd-index = <0>;
 		qcom,csid-sd-index = <0>;
 		qcom,mount-angle = <270>;
+		qcom,led-flash-src = <&led_flash0>;
 		qcom,actuator-src = <&actuator0>;
 		qcom,ois-src = <&ois0>;
 		qcom,eeprom-src = <&eeprom0>;
@@ -209,8 +268,55 @@
 		clock-names = "cam_src_clk", "cam_clk";
 		qcom,clock-rates = <24000000 0>;
 	};
+
+	qcom,camera@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera";
+		reg = <0x02>;
+		qcom,csiphy-sd-index = <2>;
+		qcom,csid-sd-index = <2>;
+		qcom,mount-angle = <90>;
+		qcom,led-flash-src = <&led_flash1>;
+		qcom,eeprom-src = <&eeprom2>;
+		qcom,actuator-src = <&actuator1>;
+		cam_vio-supply = <&pmfalcon_l11>;
+		cam_vana-supply = <&pm2falcon_bob>;
+		cam_vdig-supply = <&pmfalcon_s5>;
+		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+		qcom,cam-vreg-min-voltage = <0 3300000 1350000>;
+		qcom,cam-vreg-max-voltage = <0 3600000 1350000>;
+		qcom,cam-vreg-op-mode = <0 80000 105000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				 &cam_sensor_front_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				 &cam_sensor_front_suspend>;
+		gpios = <&tlmm 14 0>,
+			<&tlmm 28 0>,
+			<&pmfalcon_gpios 3 0>,
+			<&tlmm 29 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-vdig = <2>;
+		qcom,gpio-vana = <3>;
+		qcom,gpio-req-tbl-num = <0 1 2 3>;
+		qcom,gpio-req-tbl-flags = <1 0 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2",
+					"CAM_VDIG",
+					"CAM_VANA";
+		qcom,sensor-position = <1>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <1>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk1_clk_src>,
+			<&clock_mmss clk_mmss_camss_mclk1_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+		qcom,clock-rates = <24000000 0>;
+	};
 };
 
+
 &pmfalcon_gpios {
 	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/
 		qcom,mode = <1>;                /* Output */
@@ -221,4 +327,14 @@
 		qcom,master-en = <1>;           /* Enable GPIO */
 		status = "ok";
 	};
+
+	gpio@c200 { /* GPIO3 -CAMERA SENSOR 1 VDIG*/
+		qcom,mode = <1>;                /* Output */
+		qcom,pull = <5>;                /* No Pull */
+		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */
+		qcom,src-sel = <0>;             /* GPIO */
+		qcom,invert = <0>;              /* Invert */
+		qcom,master-en = <1>;           /* Enable GPIO */
+		status = "ok";
+	};
 };
diff --git a/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-mtp.dtsi b/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-mtp.dtsi
index 3ef09569a430..0b8d84766fc4 100644
--- a/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-mtp.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-interposer-camera-sensor-mtp.dtsi
@@ -12,6 +12,24 @@
  */
 
 &soc {
+	led_flash0: qcom,camera-flash@0 {
+		cell-index = <0>;
+		compatible = "qcom,camera-flash";
+		qcom,flash-source = <&pm2falcon_flash0 &pm2falcon_flash1>;
+		qcom,torch-source = <&pm2falcon_torch0 &pm2falcon_torch1>;
+		qcom,switch-source = <&pm2falcon_switch0>;
+		status = "ok";
+	};
+
+	led_flash1: qcom,camera-flash@1 {
+		cell-index = <1>;
+		compatible = "qcom,camera-flash";
+		qcom,flash-source = <&pm2falcon_flash2>;
+		qcom,torch-source = <&pm2falcon_torch2>;
+		qcom,switch-source = <&pm2falcon_switch1>;
+		status = "ok";
+	};
+
 	qcom,csiphy@ca34000 {
 		qcom,clock-rates = <0 0 0 0 0 0 384000000 0 0 269333333 0
 			0 384000000 0>;
@@ -164,6 +182,46 @@
 		qcom,clock-rates = <24000000 0>;
 	};
 
+	eeprom2: qcom,eeprom@2 {
+		cell-index = <2>;
+		reg = <0x2>;
+		compatible = "qcom,eeprom";
+		cam_vio-supply = <&pmfalcon_l11>;
+		cam_vana-supply = <&pm2falcon_bob>;
+		cam_vdig-supply = <&pmfalcon_s5>;
+		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+		qcom,cam-vreg-min-voltage = <0 3300000 1350000>;
+		qcom,cam-vreg-max-voltage = <0 3600000 1350000>;
+		qcom,cam-vreg-op-mode = <0 80000 105000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				 &cam_sensor_front_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				 &cam_sensor_front_suspend>;
+		gpios = <&tlmm 14 0>,
+			<&tlmm 28 0>,
+			<&pmfalcon_gpios 3 0>,
+			<&tlmm 29 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-vdig = <2>;
+		qcom,gpio-vana = <3>;
+		qcom,gpio-req-tbl-num = <0 1 2 3>;
+		qcom,gpio-req-tbl-flags = <1 0 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2",
+					"CAM_VDIG",
+					"CAM_VANA";
+		qcom,sensor-position = <1>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <1>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk1_clk_src>,
+			<&clock_mmss clk_mmss_camss_mclk1_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+		qcom,clock-rates = <24000000 0>;
+	};
+
 	qcom,camera@0 {
 		cell-index = <0>;
 		compatible = "qcom,camera";
@@ -171,6 +229,7 @@
 		qcom,csiphy-sd-index = <0>;
 		qcom,csid-sd-index = <0>;
 		qcom,mount-angle = <270>;
+		qcom,led-flash-src = <&led_flash0>;
 		qcom,actuator-src = <&actuator0>;
 		qcom,ois-src = <&ois0>;
 		qcom,eeprom-src = <&eeprom0>;
@@ -209,8 +268,55 @@
 		clock-names = "cam_src_clk", "cam_clk";
 		qcom,clock-rates = <24000000 0>;
 	};
+
+	qcom,camera@2 {
+		cell-index = <2>;
+		compatible = "qcom,camera";
+		reg = <0x02>;
+		qcom,csiphy-sd-index = <2>;
+		qcom,csid-sd-index = <2>;
+		qcom,mount-angle = <90>;
+		qcom,led-flash-src = <&led_flash1>;
+		qcom,eeprom-src = <&eeprom2>;
+		qcom,actuator-src = <&actuator1>;
+		cam_vio-supply = <&pmfalcon_l11>;
+		cam_vana-supply = <&pm2falcon_bob>;
+		cam_vdig-supply = <&pmfalcon_s5>;
+		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";
+		qcom,cam-vreg-min-voltage = <0 3300000 1350000>;
+		qcom,cam-vreg-max-voltage = <0 3600000 1350000>;
+		qcom,cam-vreg-op-mode = <0 80000 105000>;
+		qcom,gpio-no-mux = <0>;
+		pinctrl-names = "cam_default", "cam_suspend";
+		pinctrl-0 = <&cam_sensor_mclk1_active
+				 &cam_sensor_front_active>;
+		pinctrl-1 = <&cam_sensor_mclk1_suspend
+				 &cam_sensor_front_suspend>;
+		gpios = <&tlmm 14 0>,
+			<&tlmm 28 0>,
+			<&pmfalcon_gpios 3 0>,
+			<&tlmm 29 0>;
+		qcom,gpio-reset = <1>;
+		qcom,gpio-vdig = <2>;
+		qcom,gpio-vana = <3>;
+		qcom,gpio-req-tbl-num = <0 1 2 3>;
+		qcom,gpio-req-tbl-flags = <1 0 0 0>;
+		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
+					"CAM_RESET2",
+					"CAM_VDIG",
+					"CAM_VANA";
+		qcom,sensor-position = <1>;
+		qcom,sensor-mode = <0>;
+		qcom,cci-master = <1>;
+		status = "ok";
+		clocks = <&clock_mmss clk_mclk1_clk_src>,
+			<&clock_mmss clk_mmss_camss_mclk1_clk>;
+		clock-names = "cam_src_clk", "cam_clk";
+		qcom,clock-rates = <24000000 0>;
+	};
 };
 
+
 &pmfalcon_gpios {
 	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/
 		qcom,mode = <1>;                /* Output */
@@ -221,4 +327,14 @@
 		qcom,master-en = <1>;           /* Enable GPIO */
 		status = "ok";
 	};
+
+	gpio@c200 { /* GPIO3 -CAMERA SENSOR 1 VDIG*/
+		qcom,mode = <1>;                /* Output */
+		qcom,pull = <5>;                /* No Pull */
+		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */
+		qcom,src-sel = <0>;             /* GPIO */
+		qcom,invert = <0>;              /* Invert */
+		qcom,master-en = <1>;           /* Enable GPIO */
+		status = "ok";
+	};
 };
diff --git a/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi b/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
index 645f9c2c083c..436df2410de6 100644
--- a/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998-pinctrl.dtsi
@@ -1347,14 +1347,14 @@
 		};
 
 		cam_sensor_front_active: cam_sensor_front_active {
-			/* RESET */
+			/* RESET  VANA*/
 			mux {
-				pins = "gpio28";
+				pins = "gpio28", "gpio29";
 				function = "gpio";
 			};
 
 			config {
-				pins = "gpio28";
+				pins = "gpio28", "gpio29";
 				bias-disable; /* No PULL */
 				drive-strength = <2>; /* 2 MA */
 			};