Merge "input: misc: pat9125: add regulator framework support"

Documentation/devicetree/bindings/input/pixart-pat9125-switch.txt

@@ -10,6 +10,8 @@ Required properties:
  - reg	: i2c slave address of the device.
  - interrupt-parent	: parent of interrupt.
  - interrupts	: interrupt to indicate motion of the rotating switch.
+ - vdd-supply	: Power supply needed to power up the device.
+ - vld-supply	: Power source required to power up I2C bus.
 
 Optional properties:
  - pixart,inverse-x 	: boolean, use this to invert the x data before sending it to input framework
@@ -44,6 +46,8 @@ Example:
 		reg = <0x75>;
 		interrupt-parent = <&msm_gpio>;
 		interrupts = <98 0x2008>;
+		vdd-supply = <&pm8110_l5>;
+		vld-supply = <&pm8110_l17>;
 		pixart,irq-gpio = <&msm_gpio 98 0x2008>;
 		pinctrl-names = "pmx_rot_switch_active",
 				"pmx_rot_switch_suspend",

drivers/input/misc/ots_pat9125/pat9125_linux_driver.c

@@ -12,6 +12,7 @@
 #include <linux/irq.h>
 #include <linux/of_gpio.h>
 #include <linux/delay.h>
+#include <linux/regulator/consumer.h>
 #include "pixart_ots.h"
 
 struct pixart_pat9125_data {
@@ -22,6 +23,8 @@ struct pixart_pat9125_data {
 	bool press_en;
 	bool inverse_x;
 	bool inverse_y;
+	struct regulator *vdd;
+	struct regulator *vld;
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pinctrl_state_active;
 	struct pinctrl_state *pinctrl_state_suspend;
@@ -150,7 +153,7 @@ static ssize_t pat9125_test_store(struct device *dev,
 	int reg_data = 0, i;
 	long rd_addr, wr_addr, wr_data;
 	struct pixart_pat9125_data *data =
-		(struct pixart_pat9125_data *)dev->driver_data;
+		(struct pixart_pat9125_data *) dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
 
 	for (i = 0; i < sizeof(s); i++)
@@ -238,6 +241,98 @@ static int pixart_pinctrl_init(struct pixart_pat9125_data *data)
 	return 0;
 }
 
+static int pat9125_regulator_init(struct pixart_pat9125_data *data)
+{
+	int err = 0;
+	struct device *dev = &data->client->dev;
+
+	data->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(data->vdd)) {
+		dev_err(dev, "Failed to get regulator vdd %ld\n",
+					PTR_ERR(data->vdd));
+		return PTR_ERR(data->vdd);
+	}
+
+	data->vld = devm_regulator_get(dev, "vld");
+	if (IS_ERR(data->vld)) {
+		dev_err(dev, "Failed to get regulator vld %ld\n",
+					PTR_ERR(data->vld));
+		return PTR_ERR(data->vld);
+	}
+
+	err = regulator_set_voltage(data->vdd, VDD_VTG_MIN_UV, VDD_VTG_MAX_UV);
+	if (err) {
+		dev_err(dev, "Failed to set voltage for vdd reg %d\n", err);
+		return err;
+	}
+
+	err = regulator_set_load(data->vdd, VDD_ACTIVE_LOAD_UA);
+	if (err < 0) {
+		dev_err(dev, "Failed to set opt mode for vdd reg %d\n", err);
+		return err;
+	}
+
+	err = regulator_set_voltage(data->vld, VLD_VTG_MIN_UV, VLD_VTG_MAX_UV);
+	if (err) {
+		dev_err(dev, "Failed to set voltage for vld reg %d\n", err);
+		return err;
+	}
+
+	err = regulator_set_load(data->vld, VLD_ACTIVE_LOAD_UA);
+	if (err < 0) {
+		dev_err(dev, "Failed to set opt mode for vld reg %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int pat9125_power_on(struct pixart_pat9125_data *data, bool on)
+{
+	int err = 0;
+	struct device *dev = &data->client->dev;
+
+	if (on) {
+		err = regulator_enable(data->vdd);
+		if (err) {
+			dev_err(dev, "Failed to enable vdd reg %d\n", err);
+			return err;
+		}
+
+		usleep_range(DELAY_BETWEEN_REG_US, DELAY_BETWEEN_REG_US + 1);
+
+		/*
+		 * Initialize pixart sensor after some delay, when vdd
+		 * regulator is enabled
+		 */
+		if (!ots_sensor_init(data->client)) {
+			err = -ENODEV;
+			dev_err(dev, "Failed to initialize sensor %d\n", err);
+			return err;
+		}
+
+		err = regulator_enable(data->vld);
+		if (err) {
+			dev_err(dev, "Failed to enable vld reg %d\n", err);
+			return err;
+		}
+	} else {
+		err = regulator_disable(data->vld);
+		if (err) {
+			dev_err(dev, "Failed to disable vld reg %d\n", err);
+			return err;
+		}
+
+		err = regulator_disable(data->vdd);
+		if (err) {
+			dev_err(dev, "Failed to disable vdd reg %d\n", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
 static int pat9125_parse_dt(struct device *dev,
 		struct pixart_pat9125_data *data)
 {
@@ -351,9 +446,16 @@ static int pat9125_i2c_probe(struct i2c_client *client,
 		}
 	}
 
-	if (!ots_sensor_init(client)) {
-		err = -ENODEV;
-		goto err_sensor_init;
+	err = pat9125_regulator_init(data);
+	if (err) {
+		dev_err(dev, "Failed to init regulator, %d\n", err);
+		return err;
+	}
+
+	err = pat9125_power_on(data, true);
+	if (err) {
+		dev_err(dev, "Failed to power-on the sensor %d\n", err);
+		goto err_power_on;
 	}
 
 	err = devm_request_threaded_irq(dev, client->irq, NULL, pat9125_irq,
@@ -374,7 +476,11 @@ static int pat9125_i2c_probe(struct i2c_client *client,
 
 err_sysfs_create:
 err_request_threaded_irq:
-err_sensor_init:
+err_power_on:
+	regulator_set_load(data->vdd, 0);
+	regulator_set_load(data->vld, 0);
+	if (pat9125_power_on(data, false) < 0)
+		dev_err(dev, "Failed to disable regulators\n");
 	if (data->pinctrl)
 		if (pinctrl_select_state(data->pinctrl,
 				data->pinctrl_state_release) < 0)
@@ -388,10 +494,14 @@ static int pat9125_i2c_remove(struct i2c_client *client)
 	struct pixart_pat9125_data *data = i2c_get_clientdata(client);
 	struct device *dev = &data->client->dev;
 
+	sysfs_remove_group(&(data->input->dev.kobj), &pat9125_attr_grp);
 	if (data->pinctrl)
 		if (pinctrl_select_state(data->pinctrl,
 				data->pinctrl_state_release) < 0)
 			dev_err(dev, "Couldn't set pin to release state\n");
+	regulator_set_load(data->vdd, 0);
+	regulator_set_load(data->vld, 0);
+	pat9125_power_on(data, false);
 	return 0;
 }
 
@@ -399,7 +509,7 @@ static int pat9125_suspend(struct device *dev)
 {
 	int rc;
 	struct pixart_pat9125_data *data =
-		(struct pixart_pat9125_data *)dev->driver_data;
+		(struct pixart_pat9125_data *) dev_get_drvdata(dev);
 
 	disable_irq(data->client->irq);
 	if (data->pinctrl) {
@@ -410,6 +520,12 @@ static int pat9125_suspend(struct device *dev)
 									rc);
 	}
 
+	rc = pat9125_power_on(data, false);
+	if (rc) {
+		dev_err(dev, "Failed to disable regulators %d\n", rc);
+		return rc;
+	}
+
 	return 0;
 }
 
@@ -417,7 +533,7 @@ static int pat9125_resume(struct device *dev)
 {
 	int rc;
 	struct pixart_pat9125_data *data =
-		(struct pixart_pat9125_data *)dev->driver_data;
+		(struct pixart_pat9125_data *) dev_get_drvdata(dev);
 
 	if (data->pinctrl) {
 		rc = pinctrl_select_state(data->pinctrl,
@@ -426,9 +542,26 @@ static int pat9125_resume(struct device *dev)
 			dev_err(dev, "Could not set pin to active state %d\n",
 									rc);
 	}
+
+	rc = pat9125_power_on(data, true);
+	if (rc) {
+		dev_err(dev, "Failed to power-on the sensor %d\n", rc);
+		goto err_sensor_init;
+	}
+
 	enable_irq(data->client->irq);
 
 	return 0;
+
+err_sensor_init:
+	if (data->pinctrl)
+		if (pinctrl_select_state(data->pinctrl,
+				data->pinctrl_state_suspend) < 0)
+			dev_err(dev, "Couldn't set pin to suspend state\n");
+	if (pat9125_power_on(data, false) < 0)
+		dev_err(dev, "Failed to disable regulators\n");
+
+	return rc;
 }
 
 static const struct i2c_device_id pat9125_device_id[] = {

drivers/input/misc/ots_pat9125/pixart_ots.c

@@ -19,7 +19,8 @@ static void ots_write_read(struct i2c_client *client, u8 address, u8 wdata)
 
 bool ots_sensor_init(struct i2c_client *client)
 {
-	unsigned char sensor_pid = 0, read_id_ok = 0;
+	u8 sensor_pid = 0;
+	bool read_id_ok = false;
 
 	/*
 	 * Read sensor_pid in address 0x00 to check if the
@@ -28,7 +29,7 @@ bool ots_sensor_init(struct i2c_client *client)
 	sensor_pid = read_data(client, PIXART_PAT9125_PRODUCT_ID1_REG);
 
 	if (sensor_pid == PIXART_PAT9125_SENSOR_ID) {
-		read_id_ok = 1;
+		read_id_ok = true;
 
 		/*
 		 * PAT9125 sensor recommended settings:

drivers/input/misc/ots_pat9125/pixart_ots.h

@@ -13,6 +13,13 @@
 #define PINCTRL_STATE_ACTIVE	"pmx_rot_switch_active"
 #define PINCTRL_STATE_SUSPEND	"pmx_rot_switch_suspend"
 #define PINCTRL_STATE_RELEASE	"pmx_rot_switch_release"
+#define VDD_VTG_MIN_UV		1800000
+#define VDD_VTG_MAX_UV		1800000
+#define VDD_ACTIVE_LOAD_UA	10000
+#define VLD_VTG_MIN_UV		2800000
+#define VLD_VTG_MAX_UV		3300000
+#define VLD_ACTIVE_LOAD_UA	10000
+#define DELAY_BETWEEN_REG_US	20000
 
 /* Register addresses */
 #define PIXART_PAT9125_PRODUCT_ID1_REG		0x00