diff --git a/Documentation/devicetree/bindings/regulator/cprh-kbss-regulator.txt b/Documentation/devicetree/bindings/regulator/cprh-kbss-regulator.txt
index 833fb645b92a..b286b0838643 100644
--- a/Documentation/devicetree/bindings/regulator/cprh-kbss-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/cprh-kbss-regulator.txt
@@ -30,7 +30,12 @@ KBSS specific properties:
 - compatible
 	Usage:      required
 	Value type: <string>
-	Definition: "qcom,cprh-msmcobalt-kbss-regulator".
+	Definition: should be one of the following:
+		    "qcom,cprh-msmcobalt-v1-kbss-regulator",
+		    "qcom,cprh-msmcobalt-v2-kbss-regulator",
+		    "qcom,cprh-msmcobalt-kbss-regulator".
+		    If the SoC revision is not specified, then it is assumed to
+		    be the most recent revision of MSMCOBALT, i.e. v2.
 
 - qcom,cpr-controller-id
 	Usage:      required
diff --git a/arch/arm/boot/dts/qcom/msmcobalt-regulator.dtsi b/arch/arm/boot/dts/qcom/msmcobalt-regulator.dtsi
index 9f8ecea15568..eaf8f0d6240a 100644
--- a/arch/arm/boot/dts/qcom/msmcobalt-regulator.dtsi
+++ b/arch/arm/boot/dts/qcom/msmcobalt-regulator.dtsi
@@ -555,7 +555,7 @@
 &soc {
 /* CPR controller regulators */
 	apc0_cpr: cprh-ctrl@179c8000 {
-		compatible = "qcom,cprh-msmcobalt-kbss-regulator";
+		compatible = "qcom,cprh-msmcobalt-v1-kbss-regulator";
 		reg = <0x179c8000 0x4000>, <0x00784000 0x1000>;
 		reg-names = "cpr_ctrl", "fuse_base";
 		clocks = <&clock_gcc clk_gcc_hmss_rbcpr_clk>;
@@ -717,7 +717,7 @@
 	};
 
 	apc1_cpr: cprh-ctrl@179c4000{
-		compatible = "qcom,cprh-msmcobalt-kbss-regulator";
+		compatible = "qcom,cprh-msmcobalt-v1-kbss-regulator";
 		reg = <0x179c4000 0x4000>, <0x00784000 0x1000>;
 		reg-names = "cpr_ctrl", "fuse_base";
 		clocks = <&clock_gcc clk_gcc_hmss_rbcpr_clk>;
diff --git a/drivers/regulator/cprh-kbss-regulator.c b/drivers/regulator/cprh-kbss-regulator.c
index dfdd6921fed5..1c444d6d2607 100644
--- a/drivers/regulator/cprh-kbss-regulator.c
+++ b/drivers/regulator/cprh-kbss-regulator.c
@@ -184,13 +184,25 @@ static const struct cpr3_fuse_param msmcobalt_kbss_speed_bin_param[] = {
 /*
  * Open loop voltage fuse reference voltages in microvolts for MSMCOBALT v1
  */
-static const int msmcobalt_kbss_fuse_ref_volt[MSMCOBALT_KBSS_FUSE_CORNERS] = {
+static const int
+msmcobalt_v1_kbss_fuse_ref_volt[MSMCOBALT_KBSS_FUSE_CORNERS] = {
 	696000,
 	768000,
 	896000,
 	1112000,
 };
 
+/*
+ * Open loop voltage fuse reference voltages in microvolts for MSMCOBALT v2
+ */
+static const int
+msmcobalt_v2_kbss_fuse_ref_volt[MSMCOBALT_KBSS_FUSE_CORNERS] = {
+	688000,
+	756000,
+	828000,
+	1056000,
+};
+
 #define MSMCOBALT_KBSS_FUSE_STEP_VOLT		10000
 #define MSMCOBALT_KBSS_VOLTAGE_FUSE_SIZE	6
 #define MSMCOBALT_KBSS_QUOT_OFFSET_SCALE	5
@@ -357,9 +369,10 @@ static int cprh_msmcobalt_kbss_calculate_open_loop_voltages(
 {
 	struct device_node *node = vreg->of_node;
 	struct cprh_msmcobalt_kbss_fuses *fuse = vreg->platform_fuses;
-	int i, j, rc = 0;
+	int i, j, soc_revision, rc = 0;
 	bool allow_interpolation;
 	u64 freq_low, volt_low, freq_high, volt_high;
+	const int *ref_volt;
 	int *fuse_volt;
 	int *fmax_corner;
 
@@ -372,9 +385,17 @@ static int cprh_msmcobalt_kbss_calculate_open_loop_voltages(
 		goto done;
 	}
 
+	soc_revision = vreg->thread->ctrl->soc_revision;
+	if (soc_revision == 1)
+		ref_volt = msmcobalt_v1_kbss_fuse_ref_volt;
+	else if (soc_revision == 2)
+		ref_volt = msmcobalt_v2_kbss_fuse_ref_volt;
+	else
+		ref_volt = msmcobalt_v2_kbss_fuse_ref_volt;
+
 	for (i = 0; i < vreg->fuse_corner_count; i++) {
 		fuse_volt[i] = cpr3_convert_open_loop_voltage_fuse(
-			msmcobalt_kbss_fuse_ref_volt[i],
+			ref_volt[i],
 			MSMCOBALT_KBSS_FUSE_STEP_VOLT, fuse->init_voltage[i],
 			MSMCOBALT_KBSS_VOLTAGE_FUSE_SIZE);
 
@@ -1366,14 +1387,27 @@ static int cprh_kbss_regulator_resume(struct platform_device *pdev)
 	return cpr3_regulator_resume(ctrl);
 }
 
+/* Data corresponds to the SoC revision */
 static struct of_device_id cprh_regulator_match_table[] = {
-	{ .compatible = "qcom,cprh-msmcobalt-kbss-regulator", },
+	{
+		.compatible =  "qcom,cprh-msmcobalt-v1-kbss-regulator",
+		.data = (void *)(uintptr_t)1
+	},
+	{
+		.compatible = "qcom,cprh-msmcobalt-v2-kbss-regulator",
+		.data = (void *)(uintptr_t)2
+	},
+	{
+		.compatible = "qcom,cprh-msmcobalt-kbss-regulator",
+		.data = (void *)(uintptr_t)2
+	},
 	{}
 };
 
 static int cprh_kbss_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
 	struct cpr3_controller *ctrl;
 	int rc;
 
@@ -1397,6 +1431,12 @@ static int cprh_kbss_regulator_probe(struct platform_device *pdev)
 		return rc;
 	}
 
+	match = of_match_node(cprh_regulator_match_table, dev->of_node);
+	if (match)
+		ctrl->soc_revision = (uintptr_t)match->data;
+	else
+		cpr3_err(ctrl, "could not find compatible string match\n");
+
 	rc = cpr3_map_fuse_base(ctrl, pdev);
 	if (rc) {
 		cpr3_err(ctrl, "could not map fuse base address\n");