e1000e: initial support for 82579 LOMs

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/e1000e/defines.h

@@ -359,6 +359,7 @@
 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001
 #define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008
 #define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG           0x00000080
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16
 #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK   0x0FFF0000
@@ -714,6 +715,7 @@
 #define BME1000_E_PHY_ID_R2  0x01410CB1
 #define I82577_E_PHY_ID      0x01540050
 #define I82578_E_PHY_ID      0x004DD040
+#define I82579_E_PHY_ID      0x01540090
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */

drivers/net/e1000e/e1000.h

@@ -164,6 +164,7 @@ enum e1000_boards {
 	board_ich9lan,
 	board_ich10lan,
 	board_pchlan,
+	board_pch2lan,
 };
 
 struct e1000_queue_stats {
@@ -477,6 +478,7 @@ extern struct e1000_info e1000_ich8_info;
 extern struct e1000_info e1000_ich9_info;
 extern struct e1000_info e1000_ich10_info;
 extern struct e1000_info e1000_pch_info;
+extern struct e1000_info e1000_pch2_info;
 extern struct e1000_info e1000_es2_info;
 
 extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -495,6 +497,8 @@ extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);

drivers/net/e1000e/ethtool.c

@@ -880,6 +880,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	switch (mac->type) {
 	case e1000_ich10lan:
 	case e1000_pchlan:
+	case e1000_pch2lan:
 		mask |= (1 << 18);
 		break;
 	default:
@@ -1321,6 +1322,17 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 		/* Workaround: K1 must be disabled for stable 1Gbps operation */
 		e1000_configure_k1_ich8lan(hw, false);
 		break;
+	case e1000_phy_82579:
+		/* Disable PHY energy detect power down */
+		e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
+		e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
+		/* Disable full chip energy detect */
+		e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
+		/* Enable loopback on the PHY */
+#define I82577_PHY_LBK_CTRL          19
+		e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
+		break;
 	default:
 		break;
 	}
@@ -1878,6 +1890,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 
 	if ((hw->phy.type == e1000_phy_ife) ||
 	    (hw->mac.type == e1000_pchlan) ||
+	    (hw->mac.type == e1000_pch2lan) ||
 	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);

drivers/net/e1000e/hw.h

@@ -217,7 +217,10 @@ enum e1e_registers {
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
 	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
-	E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
+	E1000_FFLT_DBG  = 0x05F04, /* Debug Register */
+	E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
+#define E1000_PCH_RAICC(_n)	(E1000_PCH_RAICC_BASE + ((_n) * 4))
+#define E1000_CRC_OFFSET	E1000_PCH_RAICC_BASE
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -303,13 +306,14 @@ enum e1e_registers {
 #define E1000_KMRNCTRLSTA_OFFSET	0x001F0000
 #define E1000_KMRNCTRLSTA_OFFSET_SHIFT	16
 #define E1000_KMRNCTRLSTA_REN		0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET	0x1    /* Kumeran Control */
 #define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
 #define E1000_KMRNCTRLSTA_TIMEOUTS	0x4    /* Kumeran Timeouts */
 #define E1000_KMRNCTRLSTA_INBAND_PARAM	0x9    /* Kumeran InBand Parameters */
 #define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
 #define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
 #define E1000_KMRNCTRLSTA_K1_ENABLE	0x140E
-#define E1000_KMRNCTRLSTA_K1_DISABLE	0x1400
+#define E1000_KMRNCTRLSTA_HD_CTRL	0x0002
 
 #define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
 #define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Control */
@@ -387,6 +391,8 @@ enum e1e_registers {
 #define E1000_DEV_ID_PCH_M_HV_LC		0x10EB
 #define E1000_DEV_ID_PCH_D_HV_DM		0x10EF
 #define E1000_DEV_ID_PCH_D_HV_DC		0x10F0
+#define E1000_DEV_ID_PCH2_LV_LM			0x1502
+#define E1000_DEV_ID_PCH2_LV_V			0x1503
 
 #define E1000_REVISION_4 4
 
@@ -406,6 +412,7 @@ enum e1000_mac_type {
 	e1000_ich9lan,
 	e1000_ich10lan,
 	e1000_pchlan,
+	e1000_pch2lan,
 };
 
 enum e1000_media_type {
@@ -442,6 +449,7 @@ enum e1000_phy_type {
 	e1000_phy_bm,
 	e1000_phy_82578,
 	e1000_phy_82577,
+	e1000_phy_82579,
 };
 
 enum e1000_bus_width {

drivers/net/e1000e/ich8lan.c

@@ -52,6 +52,8 @@
  * 82577LC Gigabit Network Connection
  * 82578DM Gigabit Network Connection
  * 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
  */
 
 #include "e1000.h"
@@ -126,6 +128,9 @@
 #define HV_SMB_ADDR_PEC_EN     0x0200
 #define HV_SMB_ADDR_VALID      0x0080
 
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+
 /* Strapping Option Register - RO */
 #define E1000_STRAP                     0x0000C
 #define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
@@ -279,13 +284,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
-	if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
 	/*
 	 * The MAC-PHY interconnect may still be in SMBus mode
-		 * after Sx->S0.  Toggle the LANPHYPC Value bit to force
+	 * after Sx->S0.  If the manageability engine (ME) is
-		 * the interconnect to PCIe mode, but only if there is no
+	 * disabled, then toggle the LANPHYPC Value bit to force
-		 * firmware present otherwise firmware will have done it.
+	 * the interconnect to PCIe mode.
 	 */
+	if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
 		ctrl = er32(CTRL);
 		ctrl |=  E1000_CTRL_LANPHYPC_OVERRIDE;
 		ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
@@ -326,6 +331,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 
 	switch (phy->type) {
 	case e1000_phy_82577:
+	case e1000_phy_82579:
 		phy->ops.check_polarity = e1000_check_polarity_82577;
 		phy->ops.force_speed_duplex =
 			e1000_phy_force_speed_duplex_82577;
@@ -530,6 +536,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 		mac->ops.led_off = e1000_led_off_ich8lan;
 		break;
 	case e1000_pchlan:
+	case e1000_pch2lan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
 		/* ID LED init */
@@ -550,6 +557,14 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	if (mac->type == e1000_ich8lan)
 		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
 
+	/* Disable PHY configuration by hardware, config by software */
+	if (mac->type == e1000_pch2lan) {
+		u32 extcnf_ctrl = er32(EXTCNF_CTRL);
+
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+	}
+
 	return 0;
 }
 
@@ -653,10 +668,19 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	if (rc)
 		return rc;
 
-	if (hw->mac.type == e1000_pchlan)
+	switch (hw->mac.type) {
-		rc = e1000_init_phy_params_pchlan(hw);
+	case e1000_ich8lan:
-	else
+	case e1000_ich9lan:
+	case e1000_ich10lan:
 		rc = e1000_init_phy_params_ich8lan(hw);
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+		rc = e1000_init_phy_params_pchlan(hw);
+		break;
+	default:
+		break;
+	}
 	if (rc)
 		return rc;
 
@@ -861,6 +885,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 		}
 		/* Fall-thru */
 	case e1000_pchlan:
+	case e1000_pch2lan:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
 		break;
 	default:
@@ -880,8 +905,10 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	 * extended configuration before SW configuration
 	 */
 	data = er32(EXTCNF_CTRL);
+	if (!(hw->mac.type == e1000_pch2lan)) {
 		if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
 			goto out;
+	}
 
 	cnf_size = er32(EXTCNF_SIZE);
 	cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
@@ -893,7 +920,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
 
 	if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
-	    (hw->mac.type == e1000_pchlan)) {
+	    ((hw->mac.type == e1000_pchlan) ||
+	     (hw->mac.type == e1000_pch2lan))) {
 		/*
 		 * HW configures the SMBus address and LEDs when the
 		 * OEM and LCD Write Enable bits are set in the NVM.
@@ -1100,16 +1128,18 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 	u32 mac_reg;
 	u16 oem_reg;
 
-	if (hw->mac.type != e1000_pchlan)
+	if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
 		return ret_val;
 
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
+	if (!(hw->mac.type == e1000_pch2lan)) {
 		mac_reg = er32(EXTCNF_CTRL);
 		if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
 			goto out;
+	}
 
 	mac_reg = er32(FEXTNVM);
 	if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
@@ -1249,6 +1279,243 @@ out:
 	return ret_val;
 }
 
+/**
+ *  e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ *  @hw:   pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+	u16 i;
+
+	/* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+	for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+		mac_reg = er32(RAL(i));
+		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+		mac_reg = er32(RAH(i));
+		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0x8000));
+	}
+}
+
+static u32 e1000_calc_rx_da_crc(u8 mac[])
+{
+	u32 poly = 0xEDB88320;	/* Polynomial for 802.3 CRC calculation */
+	u32 i, j, mask, crc;
+
+	crc = 0xffffffff;
+	for (i = 0; i < 6; i++) {
+		crc = crc ^ mac[i];
+		for (j = 8; j > 0; j--) {
+			mask = (crc & 1) * (-1);
+			crc = (crc >> 1) ^ (poly & mask);
+		}
+	}
+	return ~crc;
+}
+
+/**
+ *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ *  with 82579 PHY
+ *  @hw: pointer to the HW structure
+ *  @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+	s32 ret_val = 0;
+	u16 phy_reg, data;
+	u32 mac_reg;
+	u16 i;
+
+	if (hw->mac.type != e1000_pch2lan)
+		goto out;
+
+	/* disable Rx path while enabling/disabling workaround */
+	e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+	if (ret_val)
+		goto out;
+
+	if (enable) {
+		/*
+		 * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+		 * SHRAL/H) and initial CRC values to the MAC
+		 */
+		for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+			u8 mac_addr[ETH_ALEN] = {0};
+			u32 addr_high, addr_low;
+
+			addr_high = er32(RAH(i));
+			if (!(addr_high & E1000_RAH_AV))
+				continue;
+			addr_low = er32(RAL(i));
+			mac_addr[0] = (addr_low & 0xFF);
+			mac_addr[1] = ((addr_low >> 8) & 0xFF);
+			mac_addr[2] = ((addr_low >> 16) & 0xFF);
+			mac_addr[3] = ((addr_low >> 24) & 0xFF);
+			mac_addr[4] = (addr_high & 0xFF);
+			mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+			ew32(PCH_RAICC(i),
+					e1000_calc_rx_da_crc(mac_addr));
+		}
+
+		/* Write Rx addresses to the PHY */
+		e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+		/* Enable jumbo frame workaround in the MAC */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(1 << 14);
+		mac_reg |= (7 << 15);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg |= E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data | (1 << 0));
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			goto out;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			goto out;
+
+		/* Enable jumbo frame workaround in the PHY */
+		e1e_rphy(hw, PHY_REG(769, 20), &data);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		data |= (0x37 << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 13);
+		data |= (1 << 12);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x1A << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			goto out;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+		if (ret_val)
+			goto out;
+	} else {
+		/* Write MAC register values back to h/w defaults */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(0xF << 14);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg &= ~E1000_RCTL_SECRC;
+		ew32(FFLT_DBG, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data & ~(1 << 0));
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			goto out;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			goto out;
+
+		/* Write PHY register values back to h/w defaults */
+		e1e_rphy(hw, PHY_REG(769, 20), &data);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 12);
+		data |= (1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x8 << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			goto out;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+		if (ret_val)
+			goto out;
+	}
+
+	/* re-enable Rx path after enabling/disabling workaround */
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->mac.type != e1000_pch2lan)
+		goto out;
+
+	/* Set MDIO slow mode before any other MDIO access */
+	ret_val = e1000_set_mdio_slow_mode_hv(hw);
+
+out:
+	return ret_val;
+}
+
 /**
  *  e1000_lan_init_done_ich8lan - Check for PHY config completion
  *  @hw: pointer to the HW structure
@@ -1300,12 +1567,17 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 		break;
+	case e1000_pch2lan:
+		ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			goto out;
+		break;
 	default:
 		break;
 	}
 
 	/* Dummy read to clear the phy wakeup bit after lcd reset */
-	if (hw->mac.type == e1000_pchlan)
+	if (hw->mac.type >= e1000_pchlan)
 		e1e_rphy(hw, BM_WUC, &reg);
 
 	/* Configure the LCD with the extended configuration region in NVM */
@@ -2829,6 +3101,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 
 	ew32(FCTTV, hw->fc.pause_time);
 	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
 		ew32(FCRTV_PCH, hw->fc.refresh_time);
 
@@ -2892,6 +3165,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 		break;
 	case e1000_phy_82577:
+	case e1000_phy_82579:
 		ret_val = e1000_copper_link_setup_82577(hw);
 		if (ret_val)
 			return ret_val;
@@ -3399,6 +3673,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 
 	/* Clear PHY statistics registers */
 	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
 		hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
 		hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
@@ -3534,3 +3809,22 @@ struct e1000_info e1000_pch_info = {
 	.phy_ops		= &ich8_phy_ops,
 	.nvm_ops		= &ich8_nvm_ops,
 };
+
+struct e1000_info e1000_pch2_info = {
+	.mac			= e1000_pch2lan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_RX_CSUM_ENABLED
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};

drivers/net/e1000e/netdev.c

@@ -67,6 +67,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_ich9lan]		= &e1000_ich9_info,
 	[board_ich10lan]	= &e1000_ich10_info,
 	[board_pchlan]		= &e1000_pch_info,
+	[board_pch2lan]		= &e1000_pch2_info,
 };
 
 struct e1000_reg_info {
@@ -2723,6 +2724,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		e1e_wphy(hw, 22, phy_data);
 	}
 
+	/* Workaround Si errata on 82579 - configure jumbo frame flow */
+	if (hw->mac.type == e1000_pch2lan) {
+		s32 ret_val;
+
+		if (rctl & E1000_RCTL_LPE)
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+		else
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+	}
+
 	/* Setup buffer sizes */
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
@@ -3118,7 +3129,27 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
 	 * - the full Rx FIFO size minus one full frame
 	 */
-	if (hw->mac.type == e1000_pchlan) {
+	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+		fc->pause_time = 0xFFFF;
+	else
+		fc->pause_time = E1000_FC_PAUSE_TIME;
+	fc->send_xon = 1;
+	fc->current_mode = fc->requested_mode;
+
+	switch (hw->mac.type) {
+	default:
+		if ((adapter->flags & FLAG_HAS_ERT) &&
+		    (adapter->netdev->mtu > ETH_DATA_LEN))
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		else
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - adapter->max_frame_size));
+
+		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+		break;
+	case e1000_pchlan:
 		/*
 		 * Workaround PCH LOM adapter hangs with certain network
 		 * loads.  If hangs persist, try disabling Tx flow control.
@@ -3131,26 +3162,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
 			fc->low_water  = 0x3000;
 		}
 		fc->refresh_time = 0x1000;
-	} else {
+		break;
-		if ((adapter->flags & FLAG_HAS_ERT) &&
+	case e1000_pch2lan:
-		    (adapter->netdev->mtu > ETH_DATA_LEN))
+		fc->high_water = 0x05C20;
-			hwm = min(((pba << 10) * 9 / 10),
+		fc->low_water = 0x05048;
-				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		fc->pause_time = 0x0650;
-		else
+		fc->refresh_time = 0x0400;
-			hwm = min(((pba << 10) * 9 / 10),
+		break;
-				  ((pba << 10) - adapter->max_frame_size));
-
-		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-		fc->low_water = fc->high_water - 8;
 	}
 
-	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
-		fc->pause_time = 0xFFFF;
-	else
-		fc->pause_time = E1000_FC_PAUSE_TIME;
-	fc->send_xon = 1;
-	fc->current_mode = fc->requested_mode;
-
 	/* Allow time for pending master requests to run */
 	mac->ops.reset_hw(hw);
 
@@ -4918,14 +4938,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	int retval = 0;
 
 	/* copy MAC RARs to PHY RARs */
-	for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
+	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
-		mac_reg = er32(RAL(i));
-		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
-		mac_reg = er32(RAH(i));
-		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
-	}
 
 	/* copy MAC MTA to PHY MTA */
 	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
@@ -5976,6 +5989,9 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
 
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);

drivers/net/e1000e/phy.c

@@ -2319,6 +2319,9 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case I82577_E_PHY_ID:
 		phy_type = e1000_phy_82577;
 		break;
+	case I82579_E_PHY_ID:
+		phy_type = e1000_phy_82579;
+		break;
 	default:
 		phy_type = e1000_phy_unknown;
 		break;