diff --git a/Documentation/devicetree/bindings/usb/msm-ssusb.txt b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
index fa6ee8969946..47fad8aa4a1a 100644
--- a/Documentation/devicetree/bindings/usb/msm-ssusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
@@ -19,6 +19,7 @@ Required properties :
   and reset lines used by this controller.
 - reset-names: reset signal name strings sorted in the same order as the resets
   property.
+- qcom,core-clk-rate: clock frequency to be set for USB master clock.
 
 Optional properties :
 - reg: Additional registers
@@ -54,7 +55,8 @@ Optional properties :
 - qcom,disable-dev-mode-pm: If present, it disables PM runtime functionality for device mode.
 - qcom,disable-host-mode-pm: If present, it disables XHCI PM runtime functionality when USB
   host mode is used.
-- qcom,core-clk-rate: If present, indicates clock frequency to be set for USB master clock.
+- qcom,core-clk-rate-hs: If present, indicates min core clock frequency required to support
+  hs speed.
 - extcon: phandles to external connector devices. First phandle should point to
 	  external connector, which provide "USB" cable events, the second
 	  should point to external connector device, which provide "USB-HOST"
diff --git a/arch/arm/boot/dts/qcom/msm8998.dtsi b/arch/arm/boot/dts/qcom/msm8998.dtsi
index 9490046133a3..c71392dad5de 100644
--- a/arch/arm/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm/boot/dts/qcom/msm8998.dtsi
@@ -1739,6 +1739,7 @@
 				"utmi_clk", "sleep_clk", "xo";
 
 		qcom,core-clk-rate = <120000000>;
+		qcom,core-clk-rate-hs = <60000000>;
 
 		resets = <&clock_gcc USB_30_BCR>;
 		reset-names = "core_reset";
diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
index ecfee972ea56..1e252febc783 100644
--- a/drivers/usb/dwc3/dwc3-msm.c
+++ b/drivers/usb/dwc3/dwc3-msm.c
@@ -156,6 +156,7 @@ struct dwc3_msm {
 	struct clk		*xo_clk;
 	struct clk		*core_clk;
 	long			core_clk_rate;
+	long			core_clk_rate_hs;
 	struct clk		*iface_clk;
 	struct clk		*sleep_clk;
 	struct clk		*utmi_clk;
@@ -195,6 +196,7 @@ struct dwc3_msm {
 	struct power_supply	*usb_psy;
 	struct work_struct	vbus_draw_work;
 	bool			in_host_mode;
+	enum usb_device_speed	max_rh_port_speed;
 	unsigned int		tx_fifo_size;
 	bool			vbus_active;
 	bool			suspend;
@@ -342,6 +344,23 @@ static inline void dwc3_msm_write_readback(void *base, u32 offset,
 			__func__, val, offset);
 }
 
+static bool dwc3_msm_is_ss_rhport_connected(struct dwc3_msm *mdwc)
+{
+	int i, num_ports;
+	u32 reg;
+
+	reg = dwc3_msm_read_reg(mdwc->base, USB3_HCSPARAMS1);
+	num_ports = HCS_MAX_PORTS(reg);
+
+	for (i = 0; i < num_ports; i++) {
+		reg = dwc3_msm_read_reg(mdwc->base, USB3_PORTSC + i*0x10);
+		if ((reg & PORT_CONNECT) && DEV_SUPERSPEED(reg))
+			return true;
+	}
+
+	return false;
+}
+
 static bool dwc3_msm_is_host_superspeed(struct dwc3_msm *mdwc)
 {
 	int i, num_ports;
@@ -2128,6 +2147,7 @@ static int dwc3_msm_suspend(struct dwc3_msm *mdwc)
 static int dwc3_msm_resume(struct dwc3_msm *mdwc)
 {
 	int ret;
+	long core_clk_rate;
 	struct dwc3 *dwc = platform_get_drvdata(mdwc->dwc3);
 
 	dev_dbg(mdwc->dev, "%s: exiting lpm\n", __func__);
@@ -2175,7 +2195,15 @@ static int dwc3_msm_resume(struct dwc3_msm *mdwc)
 	clk_prepare_enable(mdwc->iface_clk);
 	if (mdwc->noc_aggr_clk)
 		clk_prepare_enable(mdwc->noc_aggr_clk);
-	clk_set_rate(mdwc->core_clk, mdwc->core_clk_rate);
+
+	core_clk_rate = mdwc->core_clk_rate;
+	if (mdwc->in_host_mode && mdwc->max_rh_port_speed == USB_SPEED_HIGH) {
+		core_clk_rate = mdwc->core_clk_rate_hs;
+		dev_dbg(mdwc->dev, "%s: set hs core clk rate %ld\n", __func__,
+			core_clk_rate);
+	}
+
+	clk_set_rate(mdwc->core_clk, core_clk_rate);
 	clk_prepare_enable(mdwc->core_clk);
 
 	/* set Memory core: ON, Memory periphery: ON */
@@ -2496,6 +2524,11 @@ static int dwc3_msm_get_clk_gdsc(struct dwc3_msm *mdwc)
 	if (ret)
 		dev_err(mdwc->dev, "fail to set core_clk freq:%d\n", ret);
 
+	if (of_property_read_u32(mdwc->dev->of_node, "qcom,core-clk-rate-hs",
+				(u32 *)&mdwc->core_clk_rate_hs)) {
+		dev_dbg(mdwc->dev, "USB core-clk-rate-hs is not present\n");
+		mdwc->core_clk_rate_hs = mdwc->core_clk_rate;
+	}
 
 	mdwc->core_reset = devm_reset_control_get(mdwc->dev, "core_reset");
 	if (IS_ERR(mdwc->core_reset)) {
@@ -3179,10 +3212,26 @@ static int dwc3_msm_host_notifier(struct notifier_block *nb,
 	if (udev->parent && !udev->parent->parent &&
 			udev->dev.parent->parent == &dwc->xhci->dev) {
 		if (event == USB_DEVICE_ADD && udev->actconfig) {
+			if (!dwc3_msm_is_ss_rhport_connected(mdwc)) {
+				/*
+				 * Core clock rate can be reduced only if root
+				 * hub SS port is not enabled/connected.
+				 */
+				clk_set_rate(mdwc->core_clk,
+				mdwc->core_clk_rate_hs);
+				dev_dbg(mdwc->dev,
+					"set hs core clk rate %ld\n",
+					mdwc->core_clk_rate_hs);
+				mdwc->max_rh_port_speed = USB_SPEED_HIGH;
+			} else {
+				mdwc->max_rh_port_speed = USB_SPEED_SUPER;
+			}
+
 			if (udev->speed >= USB_SPEED_SUPER)
 				max_power = udev->actconfig->desc.bMaxPower * 8;
 			else
 				max_power = udev->actconfig->desc.bMaxPower * 2;
+
 			dev_dbg(mdwc->dev, "%s configured bMaxPower:%d (mA)\n",
 					dev_name(&udev->dev), max_power);
 
@@ -3194,6 +3243,7 @@ static int dwc3_msm_host_notifier(struct notifier_block *nb,
 			pval.intval = 0;
 			power_supply_set_property(mdwc->usb_psy,
 					POWER_SUPPLY_PROP_BOOST_CURRENT, &pval);
+			mdwc->max_rh_port_speed = USB_SPEED_UNKNOWN;
 		}
 	}