diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index ec4b6516e448..faff7ea618d0 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \ msm8996pro-auto-adp.dtb \ msm8996pro-auto-adp-lite.dtb \ msm8996pro-auto-cdp.dtb \ + msm8996pro-auto-cv2x.dtb \ msm8996pro-pmi8994-cdp.dtb \ msm8996pro-pmi8994-mtp.dtb \ msm8996pro-pmi8994-pmk8001-cdp.dtb \ diff --git a/arch/arm/boot/dts/qcom/msm8996-cv2x.dtsi b/arch/arm/boot/dts/qcom/msm8996-cv2x.dtsi new file mode 100644 index 000000000000..d18344eb3daf --- /dev/null +++ b/arch/arm/boot/dts/qcom/msm8996-cv2x.dtsi @@ -0,0 +1,641 @@ +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8996-pinctrl.dtsi" +#include "external-soc.dtsi" + +/ { + reserved-memory { + lk_mem: lk_pool@91600000 { + reg = <0x0 0x91600000 0x0 0x600000>; + label = "lk_pool"; + }; + }; + + aliases { + mhi_rmnet0 = &mhi_rmnet_0; + mhi_rmnet1 = &mhi_rmnet_1; + mhi_uci0 = &mhi_uci; + mhi0 = &mhi; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + gpios = <&tlmm 21 0>; + default-state = "on"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_pps>; + gpios = <&tlmm 22 0>; + status = "okay"; + }; +}; + +&soc { + /delete-node/ sound-9335; + + qcom,ntn_avb { + compatible = "qcom,ntn_avb"; + vdd-ntn-pci-supply = <&ntn_vreg>; + vdd-ntn-io-supply = <&ntn_vreg>; + qcom,ntn-rst-delay-msec = <100>; + qcom,ntn-rc-num = <1>; + qcom,ntn-bus-num = <1>; + qcom,ntn-mdio-bus-id = <1>; + qcom,ntn-phy-addr = <7>; + qcom,msm-bus,name = "ntn"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <100 512 0 0>, + <100 512 207108 14432000>; + }; + + usb_detect: usb_detect { + compatible = "qcom,gpio-usbdetect"; + qcom,vbus-det-gpio = <&pm8994_gpios 17 0>; + interrupt-parent = <&spmi_bus>; + interrupts = <0x0 0x9 0x0 IRQ_TYPE_NONE>; + interrupt-names ="pmic_id_irq"; + }; + + qcom,cnss { + vdd-wlan-en-supply = <&wlan_en_vreg>; + qcom,wlan-en-vreg-support; + /delete-property/ wlan-en-gpio; + /delete-property/ wlan-bootstrap-gpio; + /delete-property/ vdd-wlan-core-supply; + }; + + qcom,cnss_sdio { + compatible = "qcom,cnss_sdio"; + subsys-name = "AR6320_SDIO"; + vdd-wlan-supply = <&rome_vreg>; + vdd-wlan-xtal-supply = <&pm8994_l30>; + vdd-wlan-io-supply = <&pm8994_s4>; + vdd-wlan-dsrc-supply = <&dsrc_vreg>; + qcom,wlan-ramdump-dynamic = <0x200000>; + qcom,skip-wlan-en-toggle; + }; + + ntn_vreg: regulator-ntn-tps65051 { + compatible = "regulator-fixed"; + regulator-name = "ntn_vreg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <920>; + gpio = <&tlmm 138 0>; + enable-active-high; + }; + + eth_phy_vreg: regulator-eth-phy-tps65051 { + compatible = "regulator-fixed"; + regulator-name = "eth_phy_vreg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <920>; + gpio = <&tlmm 136 0>; + enable-active-high; + regulator-always-on; + }; + + hsm_vreg: regulator-hsm-tps22966 { + compatible = "regulator-fixed"; + regulator-name = "hsm_vreg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <2410>; + gpio = <&tlmm 81 0>; + enable-active-high; + regulator-always-on; + }; + + dsrc_vreg: dsrc_vreg { + compatible = "regulator-fixed"; + regulator-name = "dsrc_vreg"; + startup-delay-us = <2410>; + enable-active-high; + gpio = <&tlmm 125 0>; + }; + + mhi_rmnet_0: qcom,mhi-rmnet@0 { + compatible = "qcom,mhi-rmnet"; + cell-index = <0>; + qcom,mhi = <&mhi>; + qcom,mhi-rx-channel = <101>; + qcom,mhi-tx-channel = <100>; + qcom,mhi-mru = <0x4000>; + status = "okay"; + }; + + mhi_rmnet_1: qcom,mhi-rmnet@1 { + compatible = "qcom,mhi-rmnet"; + cell-index = <1>; + qcom,mhi = <&mhi>; + qcom,mhi-rx-channel = <47>; + qcom,mhi-tx-channel = <46>; + qcom,mhi-mru = <0x4000>; + qcom,interface-name = "mhi_swip"; + status = "okay"; + }; + + mhi_uci: qcom,mhi-uci { + compatible = "qcom,mhi-uci"; + qcom,mhi-uci-channels = <0 0xffff>, + <1 0x1000>, + <2 0xffff>, + <3 0xffff>, + <10 0xffff>, + <11 0x1000>, + <14 0xffff>, + <15 0x1000>, + <16 0xffff>, + <17 0x1000>, + <18 0xffff>, + <19 0x1000>, + <22 0xffff>, + <23 0x1000>, + <24 0xffff>, + <25 0x1000>, + <32 0xffff>, + <33 0x1000>; + qcom,mhi-uci-ctrlchan = <18>; + qcom,mhi = <&mhi>; + status = "okay"; + }; +}; + +/delete-node/ &sde_kms; +/delete-node/ &sde_dsi0; +/delete-node/ &sde_dsi1; +/delete-node/ &sde_dsi_phy0; +/delete-node/ &sde_dsi_phy1; +/delete-node/ &sde_hdmi_tx; +/delete-node/ &mdss_mdp; +/delete-node/ &mdss_dsi; +/delete-node/ &msm_ext_disp; +/delete-node/ &mdss_hdmi_tx; +/delete-node/ &mdss_rotator; +/delete-node/ &routing; + +&pil_modem { + status = "disabled"; +}; + +&pm8994_l9 { + regulator-always-on; +}; + +&pm8994_l10 { + regulator-always-on; +}; + +&wlan_en_vreg { + status = "okay"; +}; + +&i2c_12 { + status = "disabled"; +}; + +&spi_9 { + status = "okay"; + + /* CAN controller */ + spi@0 { + compatible = "nxp,mpc57xx"; + reg = <0>; + spi-max-frequency = <19200000>; + }; +}; + +&spi_12 { + status = "okay"; + + /* HSM module */ + spi@0 { + compatible = "infineon,sli97"; + reg = <0>; + spi-max-frequency = <4800000>; + }; +}; + +&ufs_ice { + status = "okay"; +}; + +&ufsphy1 { + status = "okay"; +}; + +&ufs1 { + status = "okay"; +}; + +&uartblsp2dm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; +}; + +/* Rome SDIO */ +&sdhc_1 { + reg = <0x7464900 0x500>, <0x7464000 0x800>; + reg-names = "hc_mem", "core_mem"; + + vdd-supply = <&wlan_en_vreg>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + + qcom,clk-rates = <400000 20000000 25000000 50000000 + 96000000 192000000>; + qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; + + qcom,bus-width = <4>; + qcom,core_3_0v_support; + qcom,nonremovable; + qcom,force-sdhc1-probe; + + status = "okay"; +}; + +/* SDCARD slot */ +&sdhc_2 { + vdd-supply = <&pm8994_l21>; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <200 800000>; + + vdd-io-supply = <&pm8994_l13>; + qcom,vdd-io-voltage-level = <1800000 2950000>; + qcom,vdd-io-current-level = <200 22000>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on + &sdc2_cd_on_sbc>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off + &sdc2_cd_off_sbc>; + + qcom,clk-rates = <400000 20000000 25000000 + 50000000 100000000 200000000>; + qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&usb2s { + status = "okay"; +}; + +&usb3 { + extcon = <&usb_detect>; + vbus_dwc3-supply = <&usb_otg_switch>; + vdda33-supply = <&pm8994_l24>; + vdda18-supply = <&pm8994_l12>; +}; + +&usb_otg_switch { + gpio = <&pm8994_gpios 11 0>; + enable-active-high; + status = "ok"; + /delete-property/ vin-supply; +}; + +&pcie1 { + qcom,msi-gicm-addr = <0x09bd0040>; + qcom,msi-gicm-base = <0x240>; +}; + +&pcie2 { + /* Enumerate MDM on wake interrupt */ + qcom,boot-option = <0x0>; +}; + +&mdm3 { + pinctrl-names = "mdm_active", "mdm_suspend"; + pinctrl-0 = <&ap2mdm_active &mdm2ap_active>; + pinctrl-1 = <&ap2mdm_sleep &mdm2ap_sleep>; + interrupt-map = <0 &tlmm 108 0x3 + 1 &tlmm 107 0x3 + 2 &tlmm 112 0x3>; + qcom,mdm2ap-errfatal-gpio = <&tlmm 108 0x00>; + qcom,ap2mdm-errfatal-gpio = <&tlmm 109 0x00>; + qcom,mdm2ap-status-gpio = <&tlmm 106 0x00>; + qcom,ap2mdm-status-gpio = <&tlmm 107 0x00>; + qcom,ap2mdm-soft-reset-gpio = <&pm8994_mpps 2 GPIO_ACTIVE_LOW>; + qcom,ap2mdm-vddmin-gpio = <&tlmm 111 0x00>; + qcom,mdm2ap-vddmin-gpio = <&tlmm 112 0x00>; + status = "okay"; +}; + +&mhi { + qcom,mhi-address-window = <0x0 0x80000000 0x1 0xffffffff>; + qcom,pci-dev_id = <0x0302>; + qcom,pci-domain = <2>; + qcom,pci-bus = <1>; + qcom,pci-slot = <0>; + esoc-names = "mdm"; + esoc-0 = <&mdm3>; + qcom,msm-bus,name = "mhi"; + qcom,msm-bus,num-cases = <2>; + qcom,msm-bus,num-paths = <1>; + qcom,msm-bus,vectors-KBps = + <100 512 0 0>, + <100 512 1200000000 650000000>; + mhi-chan-cfg-0 = <0x0 0x80 0x2 0x92>; + mhi-chan-cfg-1 = <0x1 0x80 0x2 0xa2>; + mhi-chan-cfg-2 = <0x2 0x80 0x1 0x91>; + mhi-chan-cfg-3 = <0x3 0x80 0x1 0xa1>; + mhi-chan-cfg-4 = <0x4 0x80 0x2 0x92>; + mhi-chan-cfg-5 = <0x5 0x80 0x2 0xa2>; + mhi-chan-cfg-6 = <0x6 0xa 0x2 0x92>; + mhi-chan-cfg-7 = <0x7 0xa 0x2 0xa2>; + mhi-chan-cfg-10 = <0xa 0x80 0x1 0x92>; + mhi-chan-cfg-11 = <0xb 0x80 0x1 0xa2>; + mhi-chan-cfg-14 = <0xe 0x40 0x1 0x92>; + mhi-chan-cfg-15 = <0xf 0x40 0x1 0xa2>; + mhi-chan-cfg-16 = <0x10 0x40 0x1 0x92>; + mhi-chan-cfg-17 = <0x11 0x40 0x1 0xa2>; + mhi-chan-cfg-18 = <0x12 0x40 0x1 0x92>; + mhi-chan-cfg-19 = <0x13 0x40 0x1 0xa2>; + mhi-chan-cfg-20 = <0x14 0xa 0x2 0x92>; + mhi-chan-cfg-21 = <0x15 0xa 0x2 0xa2>; + mhi-chan-cfg-22 = <0x16 0x40 0x2 0x92>; + mhi-chan-cfg-23 = <0x17 0x40 0x2 0xa2>; + mhi-chan-cfg-24 = <0x18 0xa 0x1 0x91>; + mhi-chan-cfg-25 = <0x19 0xa 0x1 0xa1>; + mhi-chan-cfg-32 = <0x20 0x80 0x2 0x92>; + mhi-chan-cfg-33 = <0x21 0x80 0x2 0xa2>; + mhi-chan-cfg-34 = <0x22 0x80 0x2 0x92>; + mhi-chan-cfg-35 = <0x23 0x80 0x2 0xa2>; + mhi-chan-cfg-46 = <0x2e 0x80 0x2 0x412>; + mhi-chan-cfg-47 = <0x2f 0x80 0x3 0x422>; + mhi-chan-cfg-100 = <0x64 0x80 0x4 0x652>; + mhi-chan-cfg-101 = <0x65 0x80 0x5 0x762>; + mhi-event-rings = <6>; + mhi-event-cfg-0 = <0x80 0x0 0x1 0 1 0x11>; + mhi-event-cfg-1 = <0x80 0x1 0x1 0 1 0x11>; + mhi-event-cfg-2 = <0x80 0x2 0x5 0 2 0x11>; + mhi-event-cfg-3 = <0x100 0x3 0x1 47 1 0x48>; + mhi-event-cfg-4 = <0x100 0x4 0x1 100 1 0x69>; + mhi-event-cfg-5 = <0x100 0x5 0x1 101 1 0x68>; + status = "okay"; +}; + +&tlmm { + /* Set these up as hogs */ + pinctrl-names = "default"; + pinctrl-0 = <&can_reset_gpio>; +}; + +&pm8994_gpios { + gpio@c700 { /* GPIO 8 - WLAN_EN */ + qcom,mode = <1>; /* Digital output*/ + qcom,pull = <4>; /* Pulldown 10uA */ + qcom,vin-sel = <2>; /* VIN2 */ + qcom,src-sel = <0>; /* GPIO */ + qcom,invert = <0>; /* Invert */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@c800 { /* GPIO 9 - Rome 3.3V control */ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* MOS logic */ + qcom,invert = <1>; /* Output high */ + qcom,vin-sel = <0>; /* VPH_PWR */ + qcom,src-sel = <0>; /* Constant */ + qcom,out-strength = <1>; /* High drive strength */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@ca00 { /* GPIO 11 - USB ENB1 (otg switch) */ + qcom,mode = <1>; /* DIGITAL OUT */ + qcom,vin-sel = <2>; /* 1.8 */ + qcom,src-sel = <0>; /* GPIO */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@d000 { /* GPIO 17 - USB1 VBUS detect */ + qcom,mode = <0>; /* Digital Input*/ + qcom,pull = <5>; /* No pull */ + qcom,vin-sel = <2>; /* 1.8 V */ + qcom,src-sel = <0>; /* GPIO */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; + + gpio@d100 { /* GPIO 18 - Rome Sleep Clock */ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,invert = <0>; /* Output low initially */ + qcom,vin-sel = <2>; /* VIN 2 */ + qcom,src-sel = <3>; /* Function 2 */ + qcom,out-strength = <2>; /* Medium */ + qcom,master-en = <1>; /* Enable GPIO */ + status = "okay"; + }; +}; + +&pm8994_mpps { + mpp@a100 { /* MPP 2 */ + /* MDM PON conrol*/ + qcom,mode = <1>; /* Digital output */ + qcom,output-type = <0>; /* CMOS logic */ + qcom,vin-sel = <2>; /* S4 1.8V */ + qcom,src-sel = <0>; /* Constant */ + qcom,master-en = <1>; /* Enable GPIO */ + qcom,invert = <1>; /* Output high */ + status = "okay"; + }; +}; + +&pm8994_vadc { + chan@5 { + label = "vcoin"; + reg = <5>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <1>; + qcom,calibration-type = "absolute"; + qcom,scale-function = <0>; + qcom,hw-settle-time = <0>; + qcom,fast-avg-setup = <0>; + }; + + chan@7 { + label = "vph_pwr"; + reg = <7>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <1>; + qcom,calibration-type = "absolute"; + qcom,scale-function = <0>; + qcom,hw-settle-time = <0>; + qcom,fast-avg-setup = <0>; + }; + + chan@73 { + label = "msm_therm"; + reg = <0x73>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; + + chan@74 { + label = "emmc_therm"; + reg = <0x74>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; + + chan@75 { + label = "pa_therm0"; + reg = <0x75>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; + + chan@77 { + label = "pa_therm1"; + reg = <0x77>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; + + chan@78 { + label = "quiet_therm"; + reg = <0x78>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; + + chan@7c { + label = "xo_therm_buf"; + reg = <0x7c>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <4>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + }; +}; + +&pm8994_adc_tm { + chan@73 { + label = "msm_therm"; + reg = <0x73>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x48>; + qcom,thermal-node; + }; + + chan@74 { + label = "emmc_therm"; + reg = <0x74>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x68>; + qcom,thermal-node; + }; + + chan@75 { + label = "pa_therm0"; + reg = <0x75>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x70>; + qcom,thermal-node; + }; + + chan@77 { + label = "pa_therm1"; + reg = <0x77>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x78>; + qcom,thermal-node; + }; + + chan@78 { + label = "quiet_therm"; + reg = <0x78>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <2>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x80>; + qcom,thermal-node; + }; + + chan@7c { + label = "xo_therm_buf"; + reg = <0x7c>; + qcom,decimation = <0>; + qcom,pre-div-channel-scaling = <0>; + qcom,calibration-type = "ratiometric"; + qcom,scale-function = <4>; + qcom,hw-settle-time = <2>; + qcom,fast-avg-setup = <0>; + qcom,btm-channel-number = <0x88>; + qcom,thermal-node; + }; +}; diff --git a/arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi b/arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi index 316859a65801..d800fdaae3de 100644 --- a/arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi +++ b/arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi @@ -1,4 +1,4 @@ -/* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. +/* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -2731,5 +2731,32 @@ }; }; }; + + pmx_pps: pmx_pps { + mux { + pins = "gpio22"; + function = "gpio"; + }; + + config { + pins = "gpio22"; + drive-strength = <16>; /* 16 mA */ + bias-pull-down; /* pull down */ + }; + }; + + can_reset_gpio: can_reset_gpio { + mux { + pins = "gpio71"; + function = "gpio"; + }; + + config { + pins = "gpio71"; + drive-strength = <2>; + output-high; + bias-pull-up; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom/msm8996pro-auto-cv2x.dts b/arch/arm/boot/dts/qcom/msm8996pro-auto-cv2x.dts new file mode 100644 index 000000000000..a89aa879436b --- /dev/null +++ b/arch/arm/boot/dts/qcom/msm8996pro-auto-cv2x.dts @@ -0,0 +1,26 @@ +/* Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include +#include "msm8996pro.dtsi" +#include "msm8996-pm8994.dtsi" +#include "msm8996pro-auto.dtsi" +#include "msm8996-cv2x.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO CV2X"; + compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp"; + qcom,msm-id = <315 0x10001>; + qcom,board-id = <0x1e 0>; +};