Staging: speakup: Fix trailing space · f6bb9e390c - evie/android_kernel_oneplus_msm8998 - Gay Catgirls Forgejo: gay catgirls having sex

evie/android_kernel_oneplus_msm8998

Staging: speakup: Fix trailing space

This patch fixes checkpatch.pl error in file spkguide.txt
ERROR: trailing whitespace

Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit is contained in:

Aybuke Ozdemir

2014-09-25 02:14:51 +03:00

• committed by

Greg Kroah-Hartman

parent 43bb32a585

commit f6bb9e390c

1 changed files with 18 additions and 18 deletions

36

drivers/staging/speakup/spkguide.txt

View file

 Speakup does support two other synthesizers, but because they work in
 conjunction with other software, they must be loaded as modules after
 their related software is loaded, and so are not available at boot up.
 These are as follows:
 decpc -- DecTalk PC (not available at boot up)
 Once you have booted the system, and if necessary, have supplied the
 proper bootup parameter for your synthesizer, Speakup will begin
 talking as soon as the kernel is loaded.  In fact, it will talk a lot!
 It will speak all the boot up messages that the kernel prints on the
 screen during the boot process.  This is because Speakup is not a
 separate screen reader, but is actually built into the operating
 kernel, they are automatically handled properly by Speakup.  There are a
 few exceptions, but we'll come to those later.
 Note:  In this guide I will refer to the numeric keypad as the keypad.
 This is done because the speakupmap.map file referred to later in this
 manual uses the term keypad instead of numeric keypad.  Also I'm lazy
 and would rather only type one word.  So keypad it is.  Got it?  Good.
 You can check to see if the boot process has completed by pressing the 8
 key on the keypad, which reads the current line.  This also has the
 effect of starting Speakup talking again, so you can press keypad enter
 to silence it again if the boot process has not completed.
 When the boot process is complete, you will arrive at a "login" prompt.
 At this point, you'll need to type in your user id and password, as
 When you are running a program or command, Speakup will automatically
 speak new text as it arrives on the screen.  You can at any time silence
 the speech with keypad enter, or use any of the Speakup review keys.
 Here are some basic Speakup review keys, and a short description of what
 they do.
 "Keypad 8 is line, say current."
 You'll notice that some commands do not have keys assigned to them.
 This is because they are very infrequently used commands, and are also
 accessible through the sys system.  We'll discuss the sys system later
 in this manual.
 You'll also notice that some commands have two keys assigned to them.
 This is because Speakup has a built in set of alternative key bindings
 for laptop users.  The alternate speakup key is the caps lock key.  You
 can press and hold the caps lock key, while pressing an alternate
 spk key_kp6 = say_to_right
  key_kpplus = say_screen
 spk key_kpplus = say_win
  key_kp1 = say_prev_char
 spk key_kp1 = right_edge
  key_kp2 = say_char
 spk key_kp2 = say_to_bottom
 double key_kp2 = say_phonetic_char
  key_kp3 = say_next_char
 spk  key_kp3 = bottom_edge
  key_kp0 = spk_key
  key_kpdot = say_position
 ln -s /sys/accessibility/speakup /speakup
 to directly access speakup parameters from /speakup.
 You can see these entries by typing the command:
 ls -1 /speakup/*
 this:
 cat /speakup/version
 Speakup v-2.00 CVS: Thu Oct 21 10:38:21 EDT 2004
 synth dtlk version 1.1
 The display shows the Speakup version number, along with the version
 All the entries in the Speakup sys system are readable, some are
 writable by root only, and some are writable by everyone.  Unless you
 know what you are doing, you should probably leave the ones that are
 writable by root only alone.  Most of the names are self explanatory.
 Vol for controlling volume, pitch for pitch, rate for controlling speaking
 rate, etc.  If you find one you aren't sure about, you can post a query
 on the Speakup list.
 It is possible to change to a different synthesizer while speakup is
 running.  In other words, it is not necessary to reboot the system
 in order to use a different synthesizer.  You can simply echo the
 synthesizer keyword to the /speakup/synth sys entry.
 Depending on your situation, you may wish to echo none to the synth
 sys entry, to disable speech while one synthesizer is disconnected and
 a second one is connected in its place.  Then echo the keyword for the
 Espeakup may already be available as a package for your distribution
 of Linux.  If it is not packaged, you need to install it manually.
 You can find it in the contrib/ subdirectory of the Speakup sources.
 The filename is espeakup-$VERSION.tar.bz2, where $VERSION
 depends on the current release of Espeakup.  The Speakup 3.1.2 source
 ships with version 0.71 of Espeakup.
 The README file included with the Espeakup sources describes the process
 These procedures are not described in this document.
 If you built Espeakup manually, the "make install" step placed the binary
 under /usr/bin.
 Run the following command as root:
 /usr/bin/espeakup
 Espeakup should start speaking.
 Once you've installed, configured, and tested Speech Dispatcher with your
 chosen software synthesizer, you still need one more piece of software
 in order to make things work.  You need a package called speechd-up.
 You get it from the free(b)soft web site mentioned above.  After you've
 compiled and installed speechd-up, you are almost ready to begin using
 your software synthesizer.
 position the reading cursor on the rightmost character of the above
 url. Press the keypad slash key once again to actually cut the text
 from the screen.  Speakup will say, "cut".  Although we call this
 cutting, Speakup does not actually delete the cut text from the screen.
 It makes a copy of the text in a special buffer for later pasting.
 Now that you have the url cut from the screen, you can paste it into
 One final warning.  If you try to load a partial map, you will quickly
 find that all the mappings you didn't include in your file got deleted
 from the working map.  Be extremely careful, and always make a backup!
 You have been warned!
 .  Internationalizing Speakup