diff --git a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts
index cb070d426bf2..3c2ee294ce11 100644
--- a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts
+++ b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996-ivi-la.dts
@@ -127,3 +127,132 @@
 	status = "okay";
 };
 
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pm8994_gpios {
+	gpio@c600 { /* GPIO 7 - adv7481 INT3 */
+		qcom,mode = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		status = "okay";
+	};
+
+	gpio@c800 { /* GPIO 9 - Rome 3.3V control */
+		qcom,mode = <1>;                /* Digital output */
+		qcom,output-type = <0>;         /* MOS logic */
+		qcom,invert = <1>;              /* Output high */
+		qcom,vin-sel = <0>;             /* VPH_PWR */
+		qcom,src-sel = <0>;             /* Constant */
+		qcom,out-strength = <1>;        /* High drive strength */
+		qcom,master-en = <1>;           /* Enable GPIO */
+		status = "okay";
+	};
+
+	gpio@c900 { /* GPIO 10 - NFC CLK _REQ*/
+		qcom,mode = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		qcom,master-en = <1>;
+		status = "okay";
+	};
+
+	gpio@cd00 { /* GPIO 14 - lcd_bklt_reg_en */
+		qcom,mode = <1>;        /* DIGITAL OUT */
+		qcom,output-type = <0>;         /* CMOS logic */
+		qcom,invert = <1>;      /* output hight initially */
+		qcom,vin-sel = <2>;     /* 1.8 */
+		qcom,src-sel = <0>;     /* CONSTANT */
+		qcom,out-strength = <1>;        /* Low drive strength */
+		qcom,master-en = <1>;   /* ENABLE GPIO */
+		status = "okay";
+	};
+	gpio@c100 { /* GPIO 2 */
+		qcom,mode = <0>;
+		qcom,pull = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		status = "okay";
+	};
+	gpio@c300 { /* GPIO 4 - adv7481 RST */
+		qcom,mode = <1>;
+		qcom,pull = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		status = "okay";
+	};
+
+	gpio@c400 { /* GPIO 5 - adv7481 INT1 */
+		qcom,mode = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		status = "okay";
+	};
+
+	gpio@c500 { /* GPIO 6 - adv7481 INT2*/
+		qcom,mode = <0>;
+		qcom,vin-sel = <2>;
+		qcom,src-sel = <0>;
+		status = "okay";
+	};
+
+	gpio@ca00 { /* GPIO 11 - USB enb1 (otg switch) */
+		qcom,mode = <1>;        /* DIGITAL OUT */
+		qcom,vin-sel = <2>;     /* 1.8 */
+		qcom,src-sel = <0>;     /* GPIO */
+		qcom,master-en = <1>;   /* Enable GPIO */
+		status = "okay";
+	};
+
+	gpio@cc00 { /* GPIO 13 - NTN_RST */
+		qcom,mode = <1>; /* DIGITAL OUT */
+		qcom,output-type = <0>; /* CMOS logic */
+		qcom,pull = <5>;
+		qcom,vin-sel = <2>; /* 1.8 */
+		qcom,out-strength = <1>;
+		qcom,src-sel = <0>; /* GPIO */
+		qcom,master-en = <1>; /* Enable GPIO */
+		status = "okay";
+	};
+
+	gpio@ce00 { /* GPIO 15 */
+		qcom,mode = <1>;
+		qcom,output-type = <0>;
+		qcom,pull = <5>;
+		qcom,vin-sel = <2>;
+		qcom,out-strength = <1>;
+		qcom,src-sel = <2>;
+		qcom,master-en = <1>;
+		status = "okay";
+	};
+	gpio@d000 { /* GPIO 17 - USB1 VBUS detect */
+		qcom,mode = <0>;        /* Digital Input*/
+		qcom,pull = <5>;        /* No pull */
+		qcom,vin-sel = <2>;     /* 1.8 V */
+		qcom,src-sel = <0>;     /* GPIO */
+		qcom,master-en = <1>;   /* Enable GPIO */
+		status = "okay";
+	};
+
+	gpio@d100 { /* GPIO 18 - Rome Sleep Clock */
+		qcom,mode = <1>;                /* Digital output */
+		qcom,output-type = <0>;         /* CMOS logic */
+		qcom,invert = <0>;              /* Output low initially */
+		qcom,vin-sel = <2>;             /* VIN 2 */
+		qcom,src-sel = <3>;             /* Function 2 */
+		qcom,out-strength = <2>;        /* Medium */
+		qcom,master-en = <1>;           /* Enable GPIO */
+		status = "okay";
+	};
+
+	gpio@d200 { /* GPIO 19 - Rome BT Reset */
+		qcom,mode = <1>;                /* Digital output*/
+		qcom,pull = <4>;                /* Pulldown 10uA */
+		qcom,vin-sel = <2>;             /* VIN2 */
+		qcom,src-sel = <0>;             /* GPIO */
+		qcom,invert = <0>;              /* Invert */
+		qcom,master-en = <1>;           /* Enable GPIO */
+		status = "okay";
+	};
+};