Expose "sector_range", which will indicate to the low-level driver
unit-tests the size (in sectors, starting from "start_sector") of the
address space in which they can perform I/O operations. This user-defined
variable can be used to change the address space size from the default
512MiB.
Change-Id: I515a6849eb39b78e653f4018993a2c8e64e2a77f
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
Unit tests submit large requests of 512KB made of 128 bios.
Current allocation was done via kmalloc which may not be able
to allocate such a large buffer which is also physically contiguous.
Using kmalloc to allocate each bio separately is also problematic as
it might not be page aligned. Some bio may end up using more than a
single memory segment which will fail the mapping of the bios to
the request which supports up to 128 physical segments.
To avoid such failure, allocate a separate page for each bio
(bio size is single page size).
Change-Id: Id0da394d458942e093d924bc7aa23aa3231cdca7
Signed-off-by: Gilad Broner <gbroner@codeaurora.org>
[venkatg@codeaurora.org: Drop changes to mmc_block_test.c]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Current test-iosched design enables running only a single test
for a single block device.
This change modifies the test-iosched framework to allow running
several tests on several block devices.
Change-Id: I051d842733873488b64e89053d9c4e30e1249870
Signed-off-by: Gilad Broner <gbroner@codeaurora.org>
[merez@codeaurora.org: fix conflicts due to removal of BKOPs UT]
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
[venkatg@codeaurora.org: Drop changes to ufs_test.c and
mmc_block_test.c]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
When running a test, a timer was set to detect test timeout
and to unblock the wait_event() function which is waiting for the
test to finish. This is redundant as wait_event timeout variant
gives the same functionality without the overhead of managing a
timer for this purpose and improve code readability.
Change-Id: Icbd3cb0f3fcb5854673f4506b102b0c80e97d6bb
Signed-off-by: Gilad Broner <gbroner@codeaurora.org>
The test will verify correctness of sequential data pattern
written to the device while new data (with same pattern) is
written simultaneously.
First this test will run a long sequential write scenario.
This first stage will write the pattern that will be read
later. Second, sequential read requests will read and
compare the same data. The second stage reads, will issue in
Parallel to write requests with the same LBA and size.
NOTE: The test requires a long timeout.
The purpose of this test is to mix read and write requests on the same
LBA while checking for the read data correctness.
Change-Id: I6a437ce689b66233af3055d07a7f62f1e7b40765
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
[venkatg@codeaurora.org: Changes to ufs_test.c are already
present as part of earlier commit, hence drop them here]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Introduce a new callback 'check_test_completion_fn' to test-iosched
framework. This callback is necessary to determine if a test has
completed or not in situation where the request queue is empty, but the
test was not completed.
Change-Id: I60bd8cccffacab11a5a7cba78caccf53fea3e1d8
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
[venkatg@codeaurora.org: Changes to ufs_test.c are already
present as part of earlier commit, hence drop them here]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
This test adds the ability to test the UFS task management feature
in the driver. It loads the queue with requests in order to allow
the task management to operate in full capacity.
Modify test-iosched infrastructure to support the new tests:
- expose check_test_completion()
Note: we submit 16-bio requests since the current HW is very slow
and we don't want to exceed the timeout duration.
Change-Id: I8ee752cba3c6838d8edc05747fa0288c4b347ef6
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
[merez@codeaurora.org: fix trivial conflicts in ufs_test.c]
Signed-off-by: Maya Erez <merez@codeaurora.org>
[venkatg@codeaurora.org: Changes to ufs_test.c are already
present as part of earlier commit, hence drop them here]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Add a define for the test bio size (which is the size of a page),
this is used for allocating the right sized buffer for the bio during
test request creation.
Change-Id: I9505c85c4352009bdee442172eb8ae8f4254cfb0
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
Change time measurements in long_sequential_test from jiffies to ktime,
and make the relevant change in test-iosched infrastructure.
In long_sequential_test we measure throughput, and the jiffies resolution
is not sensitive enough for this calculation.
Change-Id: If7c9a03c687f61996609c014e056bcd7132b9012
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
[venkatg@codeaurora.org: Drop changes to mmc_block_test.c]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Change the test design so that requests are dynamically created
and freed. This enables running tests with more than 128 requests,
therefore more than 50MiB can be written/read and makes it possible
to measure driver write/read throughput more accurately.
Change-Id: I56c9d6c1afba5c91a0621a16d97feafd4689521d
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
[merez@codeaurora.org: fix conflicts due to BKOPS tests removal]
Signed-off-by: Maya Erez <merez@codeaurora.org>
[venkatg@codeaurora.org: Drop changes to mmc_block_test.c]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Some block devices requires the rq_disk field to be assigned.
This patch exposes a new API to the block device test utility for
getting the rq_disk assigned, in the created request.
Change-Id: I61dc4dad50eb7600728156a6cd08bb1ee134df0d
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Add functionality to test-iosched so that it could simulate the
ROW scheduler behaviour. The main additions are:
- 3 distinct requests queue with counters
- support for urgent request pending
- reinsert request implementation (callback + dispatch behavior)
Change-Id: I83b5d9e3d2b8cd9a2353afa6a3e6a4cbc83b0cd4
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
[merez@codeaurora.org: fixed conflicts due to bkops tests removal]
Signed-off-by: Maya Erez <merez@codeaurora.org>
[venkatg@codeaurora.org: Dropping elevator is_urgent_fn and
reinsert_req_fn ops fn as they are not present in 3.18 kernel]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Long sequential read test measures read throughput
at the driver level by reading large requests sequentially.
Change-Id: I3b6d685930e1d0faceabbc7d20489111734cc9d4
Signed-off-by: Lee Susman <lsusman@codeaurora.org>
[merez@codeaurora.org: Fix conflicts as BKOPS tests were removed]
Signed-off-by: Maya Erez <merez@codeaurora.org>
[venkatg@codeaurora.org: Drop changes to mmc_block_test.c]
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
The test scheduler allows testing a block device by dispatching
specific requests according to the test case and declare PASS/FAIL
according to the requests completion error code
Change-Id: Ief91f9fed6e3c3c75627d27264d5252ea14f10ad
Signed-off-by: Maya Erez <merez@codeaurora.org>
