* refs/heads/tmp-8a53962
Linux 4.4.105
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
usb: host: fix incorrect updating of offset
USB: usbfs: Filter flags passed in from user space
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: Increase usbfs transfer limit
USB: core: Add type-specific length check of BOS descriptors
usb: ch9: Add size macro for SSP dev cap descriptor
usb: Add USB 3.1 Precision time measurement capability descriptor support
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
usb: hub: Cycle HUB power when initialization fails
Revert "ocfs2: should wait dio before inode lock in ocfs2_setattr()"
net: fec: fix multicast filtering hardware setup
xen-netfront: Improve error handling during initialization
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
tcp: correct memory barrier usage in tcp_check_space()
dmaengine: pl330: fix double lock
tipc: fix cleanup at module unload
net: sctp: fix array overrun read on sctp_timer_tbl
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
NFSv4: Fix client recovery when server reboots multiple times
KVM: arm/arm64: Fix occasional warning from the timer work function
nfs: Don't take a reference on fl->fl_file for LOCK operation
ravb: Remove Rx overflow log messages
net/appletalk: Fix kernel memory disclosure
vti6: fix device register to report IFLA_INFO_KIND
ARM: OMAP1: DMA: Correct the number of logical channels
net: systemport: Pad packet before inserting TSB
net: systemport: Utilize skb_put_padto()
kprobes/x86: Disable preemption in ftrace-based jprobes
perf test attr: Fix ignored test case result
sysrq : fix Show Regs call trace on ARM
EDAC, sb_edac: Fix missing break in switch
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
spi: sh-msiof: Fix DMA transfer size check
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
selftests/x86/ldt_get: Add a few additional tests for limits
s390/pci: do not require AIS facility
ima: fix hash algorithm initialization
USB: serial: option: add Quectel BG96 id
s390/runtime instrumentation: simplify task exit handling
serial: 8250_pci: Add Amazon PCI serial device ID
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
bcache: recover data from backing when data is clean
bcache: only permit to recovery read error when cache device is clean
ANDROID: initramfs: call free_initrd() when skipping init
Conflicts:
drivers/usb/core/config.c
include/linux/usb.h
include/uapi/linux/usb/ch9.h
Change-Id: Ibada5100be12f3a1389461f7738ee2ecb0d427af
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
commit faee822c5a7ab99de25cd34fcde3f8d37b6b9923 upstream.
USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor
Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since dcba dma address is not required by class driver
therefore remove the API definitions.
Change-Id: I2623cf3bf406ca0d47ea2549b5163d9e9b7351a1
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Function provides controller id used by a remote entity
to identify which usb controller to program to initiate
data transfer.
Change-Id: Ied396f34496104c139a7910ee86844c124e6803f
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
This descriptor describes the list of functions present in a given
configuration. There should be one such descriptor per configuration
supported by the device. The order in which these descriptors appear
in the BOS descriptor reflects the order of preference of configurations
as desired by the device for optimal functionality. Configuration Summary
descriptors are used by Host software to decide which Configuration to set
to obtain the desired functionality.
Change-Id: I7ec095ce19caa690c0d3dc0fdd3add5ad37a74f3
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
* refs/heads/tmp-c71ad0f:
BACKPORT: arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
ANDROID: sdcardfs: update module info
ANDROID: sdcardfs: use d_splice_alias
ANDROID: sdcardfs: add read_iter/write_iter opeations
ANDROID: sdcardfs: fix ->llseek to update upper and lower offset
ANDROID: sdcardfs: copy lower inode attributes in ->ioctl
ANDROID: sdcardfs: remove unnecessary call to do_munmap
Merge 4.4.59 into android-4.4
UPSTREAM: ipv6 addrconf: implement RFC7559 router solicitation backoff
android: base-cfg: enable CONFIG_INET_DIAG_DESTROY
ANDROID: android-base.cfg: add CONFIG_MODULES option
ANDROID: android-base.cfg: add CONFIG_IKCONFIG option
ANDROID: android-base.cfg: properly sort the file
ANDROID: binder: add hwbinder,vndbinder to BINDER_DEVICES.
ANDROID: sort android-recommended.cfg
UPSTREAM: config/android: Remove CONFIG_IPV6_PRIVACY
UPSTREAM: config: android: set SELinux as default security mode
config: android: move device mapper options to recommended
ANDROID: ARM64: Allow to choose appended kernel image
UPSTREAM: arm64: vdso: constify vm_special_mapping used for aarch32 vectors page
UPSTREAM: arm64: vdso: add __init section marker to alloc_vectors_page
UPSTREAM: ARM: 8597/1: VDSO: put RO and RO after init objects into proper sections
UPSTREAM: arm64: Add support for CLOCK_MONOTONIC_RAW in clock_gettime() vDSO
UPSTREAM: arm64: Refactor vDSO time functions
UPSTREAM: arm64: fix vdso-offsets.h dependency
UPSTREAM: kbuild: drop FORCE from PHONY targets
UPSTREAM: mm: add PHYS_PFN, use it in __phys_to_pfn()
UPSTREAM: ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
Linux 4.4.58
crypto: algif_hash - avoid zero-sized array
fbcon: Fix vc attr at deinit
serial: 8250_pci: Detach low-level driver during PCI error recovery
ACPI / blacklist: Make Dell Latitude 3350 ethernet work
ACPI / blacklist: add _REV quirks for Dell Precision 5520 and 3520
uvcvideo: uvc_scan_fallback() for webcams with broken chain
s390/zcrypt: Introduce CEX6 toleration
block: allow WRITE_SAME commands with the SG_IO ioctl
vfio/spapr: Postpone allocation of userspace version of TCE table
PCI: Do any VF BAR updates before enabling the BARs
PCI: Ignore BAR updates on virtual functions
PCI: Update BARs using property bits appropriate for type
PCI: Don't update VF BARs while VF memory space is enabled
PCI: Decouple IORESOURCE_ROM_ENABLE and PCI_ROM_ADDRESS_ENABLE
PCI: Add comments about ROM BAR updating
PCI: Remove pci_resource_bar() and pci_iov_resource_bar()
PCI: Separate VF BAR updates from standard BAR updates
x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic
igb: add i211 to i210 PHY workaround
igb: Workaround for igb i210 firmware issue
xen: do not re-use pirq number cached in pci device msi msg data
xfs: clear _XBF_PAGES from buffers when readahead page
USB: usbtmc: add missing endpoint sanity check
nl80211: fix dumpit error path RTNL deadlocks
xfs: fix up xfs_swap_extent_forks inline extent handling
xfs: don't allow di_size with high bit set
libceph: don't set weight to IN when OSD is destroyed
raid10: increment write counter after bio is split
cpufreq: Restore policy min/max limits on CPU online
ARM: dts: at91: sama5d2: add dma properties to UART nodes
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
xen/acpi: upload PM state from init-domain to Xen
mmc: sdhci: Do not disable interrupts while waiting for clock
ext4: mark inode dirty after converting inline directory
parport: fix attempt to write duplicate procfiles
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
iio: adc: ti_am335x_adc: fix fifo overrun recovery
mmc: ushc: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
uwb: i1480-dfu: fix NULL-deref at probe
usb: hub: Fix crash after failure to read BOS descriptor
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
USB: wusbcore: fix NULL-deref at probe
USB: idmouse: fix NULL-deref at probe
USB: lvtest: fix NULL-deref at probe
USB: uss720: fix NULL-deref at probe
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
ACM gadget: fix endianness in notifications
USB: serial: qcserial: add Dell DW5811e
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
ALSA: hda - Adding a group of pin definition to fix headset problem
ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
Input: sur40 - validate number of endpoints before using them
Input: kbtab - validate number of endpoints before using them
Input: cm109 - validate number of endpoints before using them
Input: yealink - validate number of endpoints before using them
Input: hanwang - validate number of endpoints before using them
Input: ims-pcu - validate number of endpoints before using them
Input: iforce - validate number of endpoints before using them
Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw
tcp: initialize icsk_ack.lrcvtime at session start time
socket, bpf: fix sk_filter use after free in sk_clone_lock
ipv4: provide stronger user input validation in nl_fib_input()
net: bcmgenet: remove bcmgenet_internal_phy_setup()
net/mlx5e: Count LRO packets correctly
net/mlx5: Increase number of max QPs in default profile
net: unix: properly re-increment inflight counter of GC discarded candidates
amd-xgbe: Fix jumbo MTU processing on newer hardware
net: properly release sk_frag.page
net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabled
net/openvswitch: Set the ipv6 source tunnel key address attribute correctly
Linux 4.4.57
ext4: fix fencepost in s_first_meta_bg validation
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
gfs2: Avoid alignment hole in struct lm_lockname
isdn/gigaset: fix NULL-deref at probe
target: Fix VERIFY_16 handling in sbc_parse_cdb
scsi: libiscsi: add lock around task lists to fix list corruption regression
scsi: lpfc: Add shutdown method for kexec
target/pscsi: Fix TYPE_TAPE + TYPE_MEDIMUM_CHANGER export
md/raid1/10: fix potential deadlock
powerpc/boot: Fix zImage TOC alignment
cpufreq: Fix and clean up show_cpuinfo_cur_freq()
perf/core: Fix event inheritance on fork()
give up on gcc ilog2() constant optimizations
kernek/fork.c: allocate idle task for a CPU always on its local node
hv_netvsc: use skb_get_hash() instead of a homegrown implementation
tpm_tis: Use devm_free_irq not free_irq
drm/amdgpu: add missing irq.h include
s390/pci: fix use after free in dma_init
KVM: PPC: Book3S PR: Fix illegal opcode emulation
xen/qspinlock: Don't kick CPU if IRQ is not initialized
Drivers: hv: avoid vfree() on crash
Drivers: hv: balloon: don't crash when memory is added in non-sorted order
pinctrl: cherryview: Do not mask all interrupts in probe
ACPI / video: skip evaluating _DOD when it does not exist
cxlflash: Increase cmd_per_lun for better throughput
crypto: mcryptd - Fix load failure
crypto: cryptd - Assign statesize properly
crypto: ghash-clmulni - Fix load failure
USB: don't free bandwidth_mutex too early
usb: core: hub: hub_port_init lock controller instead of bus
ANDROID: sdcardfs: Fix style issues in macros
ANDROID: sdcardfs: Use seq_puts over seq_printf
ANDROID: sdcardfs: Use to kstrout
ANDROID: sdcardfs: Use pr_[...] instead of printk
ANDROID: sdcardfs: remove unneeded null check
ANDROID: sdcardfs: Fix style issues with comments
ANDROID: sdcardfs: Fix formatting
ANDROID: sdcardfs: correct order of descriptors
fix the deadlock in xt_qtaguid when enable DDEBUG
net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.
Linux 4.4.56
futex: Add missing error handling to FUTEX_REQUEUE_PI
futex: Fix potential use-after-free in FUTEX_REQUEUE_PI
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
fscrypto: lock inode while setting encryption policy
fscrypt: fix renaming and linking special files
net sched actions: decrement module reference count after table flush.
dccp: fix memory leak during tear-down of unsuccessful connection request
dccp/tcp: fix routing redirect race
bridge: drop netfilter fake rtable unconditionally
ipv6: avoid write to a possibly cloned skb
ipv6: make ECMP route replacement less greedy
mpls: Send route delete notifications when router module is unloaded
act_connmark: avoid crashing on malformed nlattrs with null parms
uapi: fix linux/packet_diag.h userspace compilation error
vrf: Fix use-after-free in vrf_xmit
dccp: fix use-after-free in dccp_feat_activate_values
net: fix socket refcounting in skb_complete_tx_timestamp()
net: fix socket refcounting in skb_complete_wifi_ack()
tcp: fix various issues for sockets morphing to listen state
dccp: Unlock sock before calling sk_free()
net: net_enable_timestamp() can be called from irq contexts
net: don't call strlen() on the user buffer in packet_bind_spkt()
l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
ipv4: mask tos for input route
vti6: return GRE_KEY for vti6
vxlan: correctly validate VXLAN ID against VXLAN_N_VID
netlink: remove mmapped netlink support
ANDROID: mmc: core: export emmc revision
BACKPORT: mmc: core: Export device lifetime information through sysfs
ANDROID: android-verity: do not compile as independent module
ANDROID: sched: fix duplicate sched_group_energy const specifiers
config: disable CONFIG_USELIB and CONFIG_FHANDLE
ANDROID: power: align wakeup_sources format
ANDROID: dm: android-verity: allow disable dm-verity for Treble VTS
uid_sys_stats: change to use rt_mutex
ANDROID: vfs: user permission2 in notify_change2
ANDROID: sdcardfs: Fix gid issue
ANDROID: sdcardfs: Use tabs instead of spaces in multiuser.h
ANDROID: sdcardfs: Remove uninformative prints
ANDROID: sdcardfs: move path_put outside of spinlock
ANDROID: sdcardfs: Use case insensitive hash function
ANDROID: sdcardfs: declare MODULE_ALIAS_FS
ANDROID: sdcardfs: Get the blocksize from the lower fs
ANDROID: sdcardfs: Use d_invalidate instead of drop_recurisve
ANDROID: sdcardfs: Switch to internal case insensitive compare
ANDROID: sdcardfs: Use spin_lock_nested
ANDROID: sdcardfs: Replace get/put with d_lock
ANDROID: sdcardfs: rate limit warning print
ANDROID: sdcardfs: Fix case insensitive lookup
ANDROID: uid_sys_stats: account for fsync syscalls
ANDROID: sched: add a counter to track fsync
ANDROID: uid_sys_stats: fix negative write bytes.
ANDROID: uid_sys_stats: allow writing same state
ANDROID: uid_sys_stats: rename uid_cputime.c to uid_sys_stats.c
ANDROID: uid_cputime: add per-uid IO usage accounting
DTB: Add EAS compatible Juno Energy model to 'juno.dts'
arm64: dts: juno: Add idle-states to device tree
ANDROID: Replace spaces by '_' for some android filesystem tracepoints.
usb: gadget: f_accessory: Fix for UsbAccessory clean unbind.
android: binder: move global binder state into context struct.
android: binder: add padding to binder_fd_array_object.
binder: use group leader instead of open thread
nf: IDLETIMER: Use fullsock when querying uid
nf: IDLETIMER: Fix use after free condition during work
ANDROID: dm: android-verity: fix table_make_digest() error handling
ANDROID: usb: gadget: function: Fix commenting style
cpufreq: interactive governor drops bits in time calculation
ANDROID: sdcardfs: support direct-IO (DIO) operations
ANDROID: sdcardfs: implement vm_ops->page_mkwrite
ANDROID: sdcardfs: Don't bother deleting freelist
ANDROID: sdcardfs: Add missing path_put
ANDROID: sdcardfs: Fix incorrect hash
ANDROID: ext4 crypto: Disables zeroing on truncation when there's no key
ANDROID: ext4: add a non-reversible key derivation method
ANDROID: ext4: allow encrypting filenames using HEH algorithm
ANDROID: arm64/crypto: add ARMv8-CE optimized poly_hash algorithm
ANDROID: crypto: heh - factor out poly_hash algorithm
ANDROID: crypto: heh - Add Hash-Encrypt-Hash (HEH) algorithm
ANDROID: crypto: gf128mul - Add ble multiplication functions
ANDROID: crypto: gf128mul - Refactor gf128 overflow macros and tables
UPSTREAM: crypto: gf128mul - Zero memory when freeing multiplication table
ANDROID: crypto: shash - Add crypto_grab_shash() and crypto_spawn_shash_alg()
ANDROID: crypto: allow blkcipher walks over ablkcipher data
UPSTREAM: arm/arm64: crypto: assure that ECB modes don't require an IV
ANDROID: Refactor fs readpage/write tracepoints.
ANDROID: export security_path_chown
Squashfs: optimize reading uncompressed data
Squashfs: implement .readpages()
Squashfs: replace buffer_head with BIO
Squashfs: refactor page_actor
Squashfs: remove the FILE_CACHE option
ANDROID: android-recommended.cfg: CONFIG_CPU_SW_DOMAIN_PAN=y
FROMLIST: 9p: fix a potential acl leak
BACKPORT: posix_acl: Clear SGID bit when setting file permissions
UPSTREAM: udp: properly support MSG_PEEK with truncated buffers
UPSTREAM: arm64: Allow hw watchpoint of length 3,5,6 and 7
BACKPORT: arm64: hw_breakpoint: Handle inexact watchpoint addresses
UPSTREAM: arm64: Allow hw watchpoint at varied offset from base address
BACKPORT: hw_breakpoint: Allow watchpoint of length 3,5,6 and 7
ANDROID: sdcardfs: Switch strcasecmp for internal call
ANDROID: sdcardfs: switch to full_name_hash and qstr
ANDROID: sdcardfs: Add GID Derivation to sdcardfs
ANDROID: sdcardfs: Remove redundant operation
ANDROID: sdcardfs: add support for user permission isolation
ANDROID: sdcardfs: Refactor configfs interface
ANDROID: sdcardfs: Allow non-owners to touch
ANDROID: binder: fix format specifier for type binder_size_t
ANDROID: fs: Export vfs_rmdir2
ANDROID: fs: Export free_fs_struct and set_fs_pwd
BACKPORT: Input: xpad - validate USB endpoint count during probe
BACKPORT: Input: xpad - fix oops when attaching an unknown Xbox One gamepad
ANDROID: mnt: remount should propagate to slaves of slaves
ANDROID: sdcardfs: Switch ->d_inode to d_inode()
ANDROID: sdcardfs: Fix locking issue with permision fix up
ANDROID: sdcardfs: Change magic value
ANDROID: sdcardfs: Use per mount permissions
ANDROID: sdcardfs: Add gid and mask to private mount data
ANDROID: sdcardfs: User new permission2 functions
ANDROID: vfs: Add setattr2 for filesystems with per mount permissions
ANDROID: vfs: Add permission2 for filesystems with per mount permissions
ANDROID: vfs: Allow filesystems to access their private mount data
ANDROID: mnt: Add filesystem private data to mount points
ANDROID: sdcardfs: Move directory unlock before touch
ANDROID: sdcardfs: fix external storage exporting incorrect uid
ANDROID: sdcardfs: Added top to sdcardfs_inode_info
ANDROID: sdcardfs: Switch package list to RCU
ANDROID: sdcardfs: Fix locking for permission fix up
ANDROID: sdcardfs: Check for other cases on path lookup
ANDROID: sdcardfs: override umask on mkdir and create
arm64: kernel: Fix build warning
DEBUG: sched/fair: Fix sched_load_avg_cpu events for task_groups
DEBUG: sched/fair: Fix missing sched_load_avg_cpu events
UPSTREAM: l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
UPSTREAM: packet: fix race condition in packet_set_ring
UPSTREAM: netlink: Fix dump skb leak/double free
UPSTREAM: net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
MIPS: Prevent "restoration" of MSA context in non-MSA kernels
net: socket: don't set sk_uid to garbage value in ->setattr()
ANDROID: configs: CONFIG_ARM64_SW_TTBR0_PAN=y
UPSTREAM: arm64: Disable PAN on uaccess_enable()
UPSTREAM: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: xen: Enable user access before a privcmd hvc call
UPSTREAM: arm64: Handle faults caused by inadvertent user access with PAN enabled
BACKPORT: arm64: Disable TTBR0_EL1 during normal kernel execution
BACKPORT: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
BACKPORT: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
BACKPORT: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
UPSTREAM: arm64: alternative: add auto-nop infrastructure
UPSTREAM: arm64: barriers: introduce nops and __nops macros for NOP sequences
Revert "FROMLIST: arm64: Factor out PAN enabling/disabling into separate uaccess_* macros"
Revert "FROMLIST: arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro"
Revert "FROMLIST: arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1"
Revert "FROMLIST: arm64: Disable TTBR0_EL1 during normal kernel execution"
Revert "FROMLIST: arm64: Handle faults caused by inadvertent user access with PAN enabled"
Revert "FROMLIST: arm64: xen: Enable user access before a privcmd hvc call"
Revert "FROMLIST: arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN"
ANDROID: sched/walt: fix build failure if FAIR_GROUP_SCHED=n
ANDROID: trace: net: use %pK for kernel pointers
ANDROID: android-base: Enable QUOTA related configs
net: ipv4: Don't crash if passing a null sk to ip_rt_update_pmtu.
net: inet: Support UID-based routing in IP protocols.
net: core: add UID to flows, rules, and routes
net: core: Add a UID field to struct sock.
Revert "net: core: Support UID-based routing."
UPSTREAM: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
UPSTREAM: arm64: mm: always take dirty state from new pte in ptep_set_access_flags
UPSTREAM: arm64: Implement pmdp_set_access_flags() for hardware AF/DBM
UPSTREAM: arm64: Fix typo in the pmdp_huge_get_and_clear() definition
UPSTREAM: arm64: enable CONFIG_DEBUG_RODATA by default
goldfish: enable CONFIG_INET_DIAG_DESTROY
sched/walt: kill {min,max}_capacity
sched: fix wrong truncation of walt_avg
build: fix build config kernel_dir
ANDROID: dm verity: add minimum prefetch size
build: add build server configs for goldfish
usb: gadget: Fix compilation problem with tx_qlen field
Conflicts:
android/configs/android-base.cfg
arch/arm64/Makefile
arch/arm64/include/asm/cpufeature.h
arch/arm64/kernel/vdso/gettimeofday.S
arch/arm64/mm/cache.S
drivers/md/Kconfig
drivers/misc/Makefile
drivers/mmc/host/sdhci.c
drivers/usb/core/hcd.c
drivers/usb/gadget/function/u_ether.c
fs/sdcardfs/derived_perm.c
fs/sdcardfs/file.c
fs/sdcardfs/inode.c
fs/sdcardfs/lookup.c
fs/sdcardfs/main.c
fs/sdcardfs/multiuser.h
fs/sdcardfs/packagelist.c
fs/sdcardfs/sdcardfs.h
fs/sdcardfs/super.c
include/linux/mmc/card.h
include/linux/mmc/mmc.h
include/trace/events/android_fs.h
include/trace/events/android_fs_template.h
drivers/android/binder.c
fs/exec.c
fs/ext4/crypto_key.c
fs/ext4/ext4.h
fs/ext4/inline.c
fs/ext4/inode.c
fs/ext4/readpage.c
fs/f2fs/data.c
fs/f2fs/inline.c
fs/mpage.c
include/linux/dcache.h
include/trace/events/sched.h
include/uapi/linux/ipv6.h
net/ipv4/tcp_ipv4.c
net/netfilter/xt_IDLETIMER.c
Change-Id: Ie345db6a14869fe0aa794aef4b71b5d0d503690b
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 upstream.
The XHCI controller presents two USB buses to the system - one for USB2
and one for USB3. The hub init code (hub_port_init) is reentrant but
only locks one bus per thread, leading to a race condition failure when
two threads attempt to simultaneously initialise a USB2 and USB3 device:
[ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 13.183701] usb 3-3: device descriptor read/all, error -110
On a test system this failure occurred on 6% of all boots.
The call traces at the point of failure are:
Call Trace:
[<ffffffff81b9bab7>] schedule+0x37/0x90
[<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0
[<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30
[<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150
[<ffffffff817db10c>] usb_control_msg+0xbc/0xf0
[<ffffffff817d07de>] hub_port_init+0x51e/0xb70
[<ffffffff817d4697>] hub_event+0x817/0x1570
[<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
[<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
[<ffffffff810f4684>] worker_thread+0x64/0x4b0
[<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
[<ffffffff810fa7f5>] kthread+0x105/0x120
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
[<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
Call Trace:
[<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40
[<ffffffff817fd87e>] xhci_address_device+0xe/0x10
[<ffffffff817d047f>] hub_port_init+0x1bf/0xb70
[<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff817d4697>] hub_event+0x817/0x1570
[<ffffffff810f3e6f>] process_one_work+0x1ff/0x620
[<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620
[<ffffffff810f4684>] worker_thread+0x64/0x4b0
[<ffffffff810f4620>] ? rescuer_thread+0x390/0x390
[<ffffffff810fa7f5>] kthread+0x105/0x120
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
[<ffffffff81ba183f>] ret_from_fork+0x3f/0x70
[<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200
Which results from the two call chains:
hub_port_init
usb_get_device_descriptor
usb_get_descriptor
usb_control_msg
usb_internal_control_msg
usb_start_wait_urb
usb_submit_urb / wait_for_completion_timeout / usb_kill_urb
hub_port_init
hub_set_address
xhci_address_device
xhci_setup_device
Mathias Nyman explains the current behaviour violates the XHCI spec:
hub_port_reset() will end up moving the corresponding xhci device slot
to default state.
As hub_port_reset() is called several times in hub_port_init() it
sounds reasonable that we could end up with two threads having their
xhci device slots in default state at the same time, which according to
xhci 4.5.3 specs still is a big no no:
"Note: Software shall not transition more than one Device Slot to the
Default State at a time"
So both threads fail at their next task after this.
One fails to read the descriptor, and the other fails addressing the
device.
Fix this in hub_port_init by locking the USB controller (instead of an
individual bus) to prevent simultaneous initialisation of both buses.
Fixes: 638139eb95 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.org/lkml/2016/2/8/312
Link: https://lkml.org/lkml/2016/2/4/748
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: minor merge conflict resolution for linux-4.4.y]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows xHC to remain in low power mode and not
resume the bus when system wide resume happens.
Controller comes out of low power mode only when usb
device issues a remote wakeup or if there is a host
initiated bus resume.
Change-Id: I96cdcb9e3642906b4afa08d9bde07e123d9b3977
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
* origin/tmp-da9a92f:
arm64: kaslr: increase randomization granularity
arm64: relocatable: deal with physically misaligned kernel images
arm64: don't map TEXT_OFFSET bytes below the kernel if we can avoid it
arm64: kernel: replace early 64-bit literal loads with move-immediates
arm64: introduce mov_q macro to move a constant into a 64-bit register
arm64: kernel: perform relocation processing from ID map
arm64: kernel: use literal for relocated address of __secondary_switched
arm64: kernel: don't export local symbols from head.S
arm64: simplify kernel segment mapping granularity
arm64: cover the .head.text section in the .text segment mapping
arm64: move early boot code to the .init segment
arm64: use 'segment' rather than 'chunk' to describe mapped kernel regions
arm64: mm: Mark .rodata as RO
Linux 4.4.16
ovl: verify upper dentry before unlink and rename
drm/i915: Revert DisplayPort fast link training feature
tmpfs: fix regression hang in fallocate undo
tmpfs: don't undo fallocate past its last page
crypto: qat - make qat_asym_algs.o depend on asn1 headers
xen/acpi: allow xen-acpi-processor driver to load on Xen 4.7
File names with trailing period or space need special case conversion
cifs: dynamic allocation of ntlmssp blob
Fix reconnect to not defer smb3 session reconnect long after socket reconnect
53c700: fix BUG on untagged commands
s390: fix test_fp_ctl inline assembly contraints
scsi: fix race between simultaneous decrements of ->host_failed
ovl: verify upper dentry in ovl_remove_and_whiteout()
ovl: Copy up underlying inode's ->i_mode to overlay inode
ARM: mvebu: fix HW I/O coherency related deadlocks
ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
ALSA: hda: add AMD Stoney PCI ID with proper driver caps
ALSA: hda - fix use-after-free after module unload
ALSA: ctl: Stop notification after disconnection
ALSA: pcm: Free chmap at PCM free callback, too
ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
ALSA: hda - fix read before array start
ALSA: hda - Add PCI ID for Kabylake-H
ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup
ALSA: timer: Fix negative queue usage by racy accesses
ALSA: echoaudio: Fix memory allocation
ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()
ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
ALSA: hda - Fix the headset mic jack detection on Dell machine
ALSA: dummy: Fix a use-after-free at closing
hwmon: (dell-smm) Cache fan_type() calls and change fan detection
hwmon: (dell-smm) Disallow fan_type() calls on broken machines
hwmon: (dell-smm) Restrict fan control and serial number to CAP_SYS_ADMIN by default
tty/vt/keyboard: fix OOB access in do_compute_shiftstate()
tty: vt: Fix soft lockup in fbcon cursor blink timer.
iio:ad7266: Fix probe deferral for vref
iio:ad7266: Fix support for optional regulators
iio:ad7266: Fix broken regulator error handling
iio: accel: kxsd9: fix the usage of spi_w8r8()
staging: iio: accel: fix error check
iio: hudmidity: hdc100x: fix incorrect shifting and scaling
iio: humidity: hdc100x: fix IIO_TEMP channel reporting
iio: humidity: hdc100x: correct humidity integration time mask
iio: proximity: as3935: fix buffer stack trashing
iio: proximity: as3935: remove triggered buffer processing
iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output
iio: light apds9960: Add the missing dev.parent
iio:st_pressure: fix sampling gains (bring inline with ABI)
iio: Fix error handling in iio_trigger_attach_poll_func
xen/balloon: Fix declared-but-not-defined warning
perf/x86: Fix undefined shift on 32-bit kernels
memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
drm/vmwgfx: Fix error paths when mapping framebuffer
drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set
drm/vmwgfx: Check pin count before attempting to move a buffer
drm/vmwgfx: Work around mode set failure in 2D VMs
drm/vmwgfx: Add an option to change assumed FB bpp
drm/ttm: Make ttm_bo_mem_compat available
drm: atmel-hlcdc: actually disable scaling when no scaling is required
drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
drm: add missing drm_mode_set_crtcinfo call
drm/i915: Update CDCLK_FREQ register on BDW after changing cdclk frequency
drm/i915: Update ifdeffery for mutex->owner
drm/i915: Refresh cached DP port register value on resume
drm/i915/ilk: Don't disable SSC source if it's in use
drm/nouveau/disp/sor/gf119: select correct sor when poking training pattern
drm/nouveau: fix for disabled fbdev emulation
drm/nouveau/fbcon: fix out-of-bounds memory accesses
drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
drm/nouveau/disp/sor/gf119: both links use the same training register
virtio_balloon: fix PFN format for virtio-1
drm/dp/mst: Always clear proposed vcpi table for port.
drm/amdkfd: destroy dbgmgr in notifier release
drm/amdkfd: unbind only existing processes
ubi: Make recover_peb power cut aware
drm/amdgpu/gfx7: fix broken condition check
drm/radeon: fix asic initialization for virtualized environments
btrfs: account for non-CoW'd blocks in btrfs_abort_transaction
percpu: fix synchronization between synchronous map extension and chunk destruction
percpu: fix synchronization between chunk->map_extend_work and chunk destruction
af_unix: fix hard linked sockets on overlay
vfs: add d_real_inode() helper
arm64: Rework valid_user_regs
ipmi: Remove smi_msg from waiting_rcv_msgs list before handle_one_recv_msg()
drm/mgag200: Black screen fix for G200e rev 4
iommu/amd: Fix unity mapping initialization race
iommu/vt-d: Enable QI on all IOMMUs before setting root entry
iommu/arm-smmu: Wire up map_sg for arm-smmu-v3
base: make module_create_drivers_dir race-free
tracing: Handle NULL formats in hold_module_trace_bprintk_format()
HID: multitouch: enable palm rejection for Windows Precision Touchpad
HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands
HID: elo: kill not flush the work
KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.
kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES
KEYS: potential uninitialized variable
ARCv2: LLSC: software backoff is NOT needed starting HS2.1c
ARCv2: Check for LL-SC livelock only if LLSC is enabled
ipv6: Fix mem leak in rt6i_pcpu
cdc_ncm: workaround for EM7455 "silent" data interface
net_sched: fix mirrored packets checksum
packet: Use symmetric hash for PACKET_FANOUT_HASH.
sched/fair: Fix cfs_rq avg tracking underflow
UBIFS: Implement ->migratepage()
mm: Export migrate_page_move_mapping and migrate_page_copy
MIPS: KVM: Fix modular KVM under QEMU
ARM: 8579/1: mm: Fix definition of pmd_mknotpresent
ARM: 8578/1: mm: ensure pmd_present only checks the valid bit
ARM: imx6ul: Fix Micrel PHY mask
NFS: Fix another OPEN_DOWNGRADE bug
make nfs_atomic_open() call d_drop() on all ->open_context() errors.
nfsd: check permissions when setting ACLs
posix_acl: Add set_posix_acl
nfsd: Extend the mutex holding region around in nfsd4_process_open2()
nfsd: Always lock state exclusively.
nfsd4/rpc: move backchannel create logic into rpc code
writeback: use higher precision calculation in domain_dirty_limits()
thermal: cpu_cooling: fix improper order during initialization
uvc: Forward compat ioctls to their handlers directly
Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"
x86/amd_nb: Fix boot crash on non-AMD systems
kprobes/x86: Clear TF bit in fault on single-stepping
x86, build: copy ldlinux.c32 to image.iso
locking/static_key: Fix concurrent static_key_slow_inc()
locking/qspinlock: Fix spin_unlock_wait() some more
locking/ww_mutex: Report recursive ww_mutex locking early
of: irq: fix of_irq_get[_byname]() kernel-doc
of: fix autoloading due to broken modalias with no 'compatible'
mnt: If fs_fully_visible fails call put_filesystem.
mnt: Account for MS_RDONLY in fs_fully_visible
mnt: fs_fully_visible test the proper mount for MNT_LOCKED
usb: common: otg-fsm: add license to usb-otg-fsm
USB: EHCI: declare hostpc register as zero-length array
usb: dwc2: fix regression on big-endian PowerPC/ARM systems
powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
powerpc/pseries: Fix PCI config address for DDW
powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs
IB/cm: Fix a recently introduced locking bug
EDAC, sb_edac: Fix rank lookup on Broadwell
mac80211: Fix mesh estab_plinks counting in STA removal case
mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNAL
mac80211: mesh: flush mesh paths unconditionally
mac80211: fix fast_tx header alignment
Linux 4.4.15
usb: dwc3: exynos: Fix deferred probing storm.
usb: host: ehci-tegra: Grab the correct UTMI pads reset
usb: gadget: fix spinlock dead lock in gadgetfs
USB: mos7720: delete parport
xhci: Fix handling timeouted commands on hosts in weird states.
USB: xhci: Add broken streams quirk for Frescologic device id 1009
usb: xhci-plat: properly handle probe deferral for devm_clk_get()
xhci: Cleanup only when releasing primary hcd
usb: musb: host: correct cppi dma channel for isoch transfer
usb: musb: Ensure rx reinit occurs for shared_fifo endpoints
usb: musb: Stop bulk endpoint while queue is rotated
usb: musb: only restore devctl when session was set in backup
usb: quirks: Add no-lpm quirk for Acer C120 LED Projector
usb: quirks: Fix sorting
USB: uas: Fix slave queue_depth not being set
crypto: user - re-add size check for CRYPTO_MSG_GETALG
crypto: ux500 - memmove the right size
crypto: vmx - Increase priority of aes-cbc cipher
AX.25: Close socket connection on session completion
bpf: try harder on clones when writing into skb
net: alx: Work around the DMA RX overflow issue
net: macb: fix default configuration for GMAC on AT91
neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()
bpf, perf: delay release of BPF prog after grace period
sock_diag: do not broadcast raw socket destruction
Bridge: Fix ipv6 mc snooping if bridge has no ipv6 address
ipmr/ip6mr: Initialize the last assert time of mfc entries.
netem: fix a use after free
esp: Fix ESN generation under UDP encapsulation
sit: correct IP protocol used in ipip6_err
net: Don't forget pr_fmt on net_dbg_ratelimited for CONFIG_DYNAMIC_DEBUG
net_sched: fix pfifo_head_drop behavior vs backlog
sdcardfs: Truncate packages_gid.list on overflow
UPSTREAM: cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
BACKPORT: proc: add /proc/<pid>/timerslack_ns interface
BACKPORT: timer: convert timer_slack_ns from unsigned long to u64
netfilter: xt_quota2: make quota2_log work well
Revert "usb: gadget: prevent change of Host MAC address of 'usb0' interface"
BACKPORT: PM / sleep: Go direct_complete if driver has no callbacks
ANDROID: base-cfg: enable UID_CPUTIME
UPSTREAM: USB: usbfs: fix potential infoleak in devio
UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_ccallback
UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
UPSTREAM: ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS
ANDROID: configs: remove unused configs
ANDROID: cpu: send KOBJ_ONLINE event when enabling cpus
ANDROID: dm verity fec: initialize recursion level
ANDROID: dm verity fec: fix RS block calculation
Linux 4.4.14
netfilter: x_tables: introduce and use xt_copy_counters_from_user
netfilter: x_tables: do compat validation via translate_table
netfilter: x_tables: xt_compat_match_from_user doesn't need a retval
netfilter: ip6_tables: simplify translate_compat_table args
netfilter: ip_tables: simplify translate_compat_table args
netfilter: arp_tables: simplify translate_compat_table args
netfilter: x_tables: don't reject valid target size on some architectures
netfilter: x_tables: validate all offsets and sizes in a rule
netfilter: x_tables: check for bogus target offset
netfilter: x_tables: check standard target size too
netfilter: x_tables: add compat version of xt_check_entry_offsets
netfilter: x_tables: assert minimum target size
netfilter: x_tables: kill check_entry helper
netfilter: x_tables: add and use xt_check_entry_offsets
netfilter: x_tables: validate targets of jumps
netfilter: x_tables: don't move to non-existent next rule
drm/core: Do not preserve framebuffer on rmfb, v4.
crypto: qat - fix adf_ctl_drv.c:undefined reference to adf_init_pf_wq
netfilter: x_tables: fix unconditional helper
netfilter: x_tables: make sure e->next_offset covers remaining blob size
netfilter: x_tables: validate e->target_offset early
MIPS: Fix 64k page support for 32 bit kernels.
sparc64: Fix return from trap window fill crashes.
sparc: Harden signal return frame checks.
sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
sparc64: Reduce TLB flushes during hugepte changes
sparc/PCI: Fix for panic while enabling SR-IOV
sparc64: Fix sparc64_set_context stack handling.
sparc64: Fix numa node distance initialization
sparc64: Fix bootup regressions on some Kconfig combinations.
sparc: Fix system call tracing register handling.
fix d_walk()/non-delayed __d_free() race
sched: panic on corrupted stack end
proc: prevent stacking filesystems on top
x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
ecryptfs: forbid opening files without mmap handler
memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
parisc: Fix pagefault crash in unaligned __get_user() call
pinctrl: mediatek: fix dual-edge code defect
powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
powerpc: Use privileged SPR number for MMCR2
powerpc: Fix definition of SIAR and SDAR registers
powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
arm64: mm: always take dirty state from new pte in ptep_set_access_flags
arm64: Provide "model name" in /proc/cpuinfo for PER_LINUX32 tasks
crypto: ccp - Fix AES XTS error for request sizes above 4096
crypto: public_key: select CRYPTO_AKCIPHER
irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
s390/bpf: reduce maximum program size to 64 KB
s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
ARM: fix PTRACE_SETVFPREGS on SMP systems
ALSA: hda/realtek: Add T560 docking unit fixup
ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
ALSA: hda/realtek - ALC256 speaker noise issue
ALSA: hda - Fix headset mic detection problem for Dell machine
ALSA: hda - Add PCI ID for Kabylake
KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
geneve: Relax MTU constraints
vxlan: Relax MTU constraints
ipv6: Skip XFRM lookup if dst_entry in socket cache is valid
l2tp: fix configuration passed to setup_udp_tunnel_sock()
bridge: Don't insert unnecessary local fdb entry on changing mac address
tcp: record TLP and ER timer stats in v6 stats
vxlan: Accept user specified MTU value when create new vxlan link
team: don't call netdev_change_features under team->lock
sfc: on MC reset, clear PIO buffer linkage in TXQs
bpf, inode: disallow userns mounts
uapi glibc compat: fix compilation when !__USE_MISC in glibc
udp: prevent skbs lingering in tunnel socket queues
bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
tuntap: correctly wake up process during uninit
switchdev: pass pointer to fib_info instead of copy
tipc: fix nametable publication field in nl compat
netlink: Fix dump skb leak/double free
tipc: check nl sock before parsing nested attributes
scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
cs-etm: associating output packet with CPU they executed on
cs-etm: removing unecessary structure field
cs-etm: account for each trace buffer in the queue
cs-etm: avoid casting variable
perf tools: fixing Makefile problems
perf tools: new naming convention for openCSD
perf scripts: Add python scripts for CoreSight traces
perf tools: decoding capailitity for CoreSight traces
perf symbols: Check before overwriting build_id
perf tools: pushing driver configuration down to the kernel
perf tools: add infrastructure for PMU specific configuration
coresight: etm-perf: incorporating sink definition from the cmd line
coresight: adding sink parameter to function coresight_build_path()
perf: passing struct perf_event to function setup_aux()
perf/core: adding PMU driver specific configuration
perf tools: adding coresight etm PMU record capabilities
perf tools: making coresight PMU listable
coresight: tmc: implementing TMC-ETR AUX space API
coresight: Add support for Juno platform
coresight: Handle build path error
coresight: Fix erroneous memset in tmc_read_unprepare_etr
coresight: Fix tmc_read_unprepare_etr
coresight: Fix NULL pointer dereference in _coresight_build_path
ANDROID: dm verity fec: add missing release from fec_ktype
ANDROID: dm verity fec: limit error correction recursion
ANDROID: restrict access to perf events
FROMLIST: security,perf: Allow further restriction of perf_event_open
BACKPORT: perf tools: Document the perf sysctls
Revert "armv6 dcc tty driver"
Revert "arm: dcc_tty: fix armv6 dcc tty build failure"
ARM64: Ignore Image-dtb from git point of view
arm64: add option to build Image-dtb
ANDROID: usb: gadget: f_midi: set fi->f to NULL when free f_midi function
Linux 4.4.13
xfs: handle dquot buffer readahead in log recovery correctly
xfs: print name of verifier if it fails
xfs: skip stale inodes in xfs_iflush_cluster
xfs: fix inode validity check in xfs_iflush_cluster
xfs: xfs_iflush_cluster fails to abort on error
xfs: Don't wrap growfs AGFL indexes
xfs: disallow rw remount on fs with unknown ro-compat features
gcov: disable tree-loop-im to reduce stack usage
scripts/package/Makefile: rpmbuild add support of RPMOPTS
dma-debug: avoid spinlock recursion when disabling dma-debug
PM / sleep: Handle failures in device_suspend_late() consistently
ext4: silence UBSAN in ext4_mb_init()
ext4: address UBSAN warning in mb_find_order_for_block()
ext4: fix oops on corrupted filesystem
ext4: clean up error handling when orphan list is corrupted
ext4: fix hang when processing corrupted orphaned inode list
drm/imx: Match imx-ipuv3-crtc components using device node in platform data
drm/i915: Don't leave old junk in ilk active watermarks on readout
drm/atomic: Verify connector->funcs != NULL when clearing states
drm/fb_helper: Fix references to dev->mode_config.num_connector
drm/i915/fbdev: Fix num_connector references in intel_fb_initial_config()
drm/amdgpu: Fix hdmi deep color support.
drm/amdgpu: use drm_mode_vrefresh() rather than mode->vrefresh
drm/vmwgfx: Fix order of operation
drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
drm/gma500: Fix possible out of bounds read
sunrpc: fix stripping of padded MIC tokens
xen: use same main loop for counting and remapping pages
xen/events: Don't move disabled irqs
powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
powerpc/book3s64: Fix branching to OOL handlers in relocatable kernel
pipe: limit the per-user amount of pages allocated in pipes
QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
wait/ptrace: assume __WALL if the child is traced
mm: use phys_addr_t for reserve_bootmem_region() arguments
media: v4l2-compat-ioctl32: fix missing reserved field copy in put_v4l2_create32
PCI: Disable all BAR sizing for devices with non-compliant BARs
pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range
clk: bcm2835: divider value has to be 1 or more
clk: bcm2835: pll_off should only update CM_PLL_ANARST
clk: at91: fix check of clk_register() returned value
clk: bcm2835: Fix PLL poweron
cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter()
cpuidle: Indicate when a device has been unregistered
PM / Runtime: Fix error path in pm_runtime_force_resume()
mfd: intel_soc_pmic_core: Terminate panel control GPIO lookup table correctly
mfd: intel-lpss: Save register context on suspend
hwmon: (ads7828) Enable internal reference
aacraid: Fix for KDUMP driver hang
aacraid: Fix for aac_command_thread hang
aacraid: Relinquish CPU during timeout wait
rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring
rtlwifi: Fix logic error in enter/exit power-save mode
rtlwifi: btcoexist: Implement antenna selection
rtlwifi: rtl8723be: Add antenna select module parameter
hwrng: exynos - Fix unbalanced PM runtime put on timeout error path
ath5k: Change led pin configuration for compaq c700 laptop
ath10k: fix kernel panic, move arvifs list head init before htt init
ath10k: fix rx_channel during hw reconfigure
ath10k: fix firmware assert in monitor mode
ath10k: fix debugfs pktlog_filter write
ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
ath9k: Add a module parameter to invert LED polarity.
ARM: dts: imx35: restore existing used clock enumeration
ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description
ARM: mvebu: fix GPIO config on the Linksys boards
Input: uinput - handle compat ioctl for UI_SET_PHYS
ASoC: ak4642: Enable cache usage to fix crashes on resume
affs: fix remount failure when there are no options changed
MIPS: VDSO: Build with `-fno-strict-aliasing'
MIPS: lib: Mark intrinsics notrace
MIPS: Build microMIPS VDSO for microMIPS kernels
MIPS: Fix sigreturn via VDSO on microMIPS kernel
MIPS: ptrace: Prevent writes to read-only FCSR bits
MIPS: ptrace: Fix FP context restoration FCSR regression
MIPS: Disable preemption during prctl(PR_SET_FP_MODE, ...)
MIPS: Prevent "restoration" of MSA context in non-MSA kernels
MIPS: Fix MSA ld_*/st_* asm macros to use PTR_ADDU
MIPS: Use copy_s.fmt rather than copy_u.fmt
MIPS: Loongson-3: Reserve 32MB for RS780E integrated GPU
MIPS: Reserve nosave data for hibernation
MIPS: ath79: make bootconsole wait for both THRE and TEMT
MIPS: Sync icache & dcache in set_pte_at
MIPS: Handle highmem pages in __update_cache
MIPS: Flush highmem pages in __flush_dcache_page
MIPS: Fix watchpoint restoration
MIPS: Fix uapi include in exported asm/siginfo.h
MIPS: Fix siginfo.h to use strict posix types
MIPS: Avoid using unwind_stack() with usermode
MIPS: Don't unwind to user mode with EVA
MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
MIPS: math-emu: Fix jalr emulation when rd == $0
MIPS64: R6: R2 emulation bugfix
coresight: etb10: adjust read pointer only when needed
coresight: configuring ETF in FIFO mode when acting as link
coresight: tmc: implementing TMC-ETF AUX space API
coresight: moving struct cs_buffers to header file
coresight: tmc: keep track of memory width
coresight: tmc: make sysFS and Perf mode mutually exclusive
coresight: tmc: dump system memory content only when needed
coresight: tmc: adding mode of operation for link/sinks
coresight: tmc: getting rid of multiple read access
coresight: tmc: allocating memory when needed
coresight: tmc: making prepare/unprepare functions generic
coresight: tmc: splitting driver in ETB/ETF and ETR components
coresight: tmc: cleaning up header file
coresight: tmc: introducing new header file
coresight: tmc: clearly define number of transfers per burst
coresight: tmc: re-implementing tmc_read_prepare/unprepare() functions
coresight: tmc: waiting for TMCReady bit before programming
coresight: tmc: modifying naming convention
coresight: tmc: adding sysFS management entries
coresight: etm4x: add tracer ID for A72 Maia processor.
coresight: etb10: fixing the right amount of words to read
coresight: stm: adding driver for CoreSight STM component
coresight: adding path for STM device
coresight: etm4x: modify q_support type
coresight: no need to do the forced type conversion
coresight: removing gratuitous boot time log messages
coresight: etb10: splitting sysFS "status" entry
coresight: moving coresight_simple_func() to header file
coresight: etm4x: implementing the perf PMU API
coresight: etm4x: implementing user/kernel mode tracing
coresight: etm4x: moving etm_drvdata::enable to atomic field
coresight: etm4x: unlocking tracers in default arch init
coresight: etm4x: splitting etmv4 default configuration
coresight: etm4x: splitting struct etmv4_drvdata
coresight: etm4x: adding config and traceid registers
coresight: etm4x: moving sysFS entries to a dedicated file
stm class: Support devices that override software assigned masters
stm class: Remove unnecessary pointer increment
stm class: Fix stm device initialization order
stm class: Do not leak the chrdev in error path
stm class: Remove a pointless line
stm class: stm_heartbeat: Make nr_devs parameter read-only
stm class: dummy_stm: Make nr_dummies parameter read-only
MAINTAINERS: Add a git tree for the stm class
perf/ring_buffer: Document AUX API usage
perf/core: Free AUX pages in unmap path
perf/ring_buffer: Refuse to begin AUX transaction after rb->aux_mmap_count drops
perf auxtrace: Add perf_evlist pointer to *info_priv_size()
perf session: Simplify tool stubs
perf inject: Hit all DSOs for AUX data in JIT and other cases
perf tools: tracepoint_error() can receive e=NULL, robustify it
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf evsel: Introduce disable() method
perf cpumap: Auto initialize cpu__max_{node,cpu}
drivers/hwtracing: make coresight-etm-perf.c explicitly non-modular
drivers/hwtracing: make coresight-* explicitly non-modular
coresight: introducing a global trace ID function
coresight: etm-perf: new PMU driver for ETM tracers
coresight: etb10: implementing AUX API
coresight: etb10: adding operation mode for sink->enable()
coresight: etb10: moving to local atomic operations
coresight: etm3x: implementing perf_enable/disable() API
coresight: etm3x: implementing user/kernel mode tracing
coresight: etm3x: consolidating initial config
coresight: etm3x: changing default trace configuration
coresight: etm3x: set progbit to stop trace collection
coresight: etm3x: adding operation mode for etm_enable()
coresight: etm3x: splitting struct etm_drvdata
coresight: etm3x: unlocking tracers in default arch init
coresight: etm3x: moving sysFS entries to dedicated file
coresight: etm3x: moving etm_readl/writel to header file
coresight: moving PM runtime operations to core framework
coresight: add API to get sink from path
coresight: associating path with session rather than tracer
coresight: etm4x: Check every parameter used by dma_xx_coherent.
coresight: "DEVICE_ATTR_RO" should defined as static.
coresight: implementing 'cpu_id()' API
coresight: removing bind/unbind options from sysfs
coresight: remove csdev's link from topology
coresight: release reference taken by 'bus_find_device()'
coresight: coresight_unregister() function cleanup
coresight: fixing lockdep error
coresight: fixing indentation problem
coresight: Fix a typo in Kconfig
coresight: checking for NULL string in coresight_name_match()
perf/core: Disable the event on a truncated AUX record
perf/core: Don't leak event in the syscall error path
perf/core: Fix perf_sched_count derailment
stm class: dummy_stm: Add link callback for fault injection
stm class: Plug stm device's unlink callback
stm class: Fix a race in unlinking
stm class: Fix unbalanced module/device refcounting
stm class: Guard output assignment against concurrency
stm class: Fix unlocking braino in the error path
stm class: Add heartbeat stm source device
stm class: dummy_stm: Create multiple devices
stm class: Support devices with multiple instances
stm class: Use driver's packet callback return value
stm class: Prevent user-controllable allocations
stm class: Fix link list locking
stm class: Fix locking in unbinding policy path
stm class: Select CONFIG_SRCU
stm class: Hide STM-specific options if STM is disabled
perf: Synchronously free aux pages in case of allocation failure
Linux 4.4.12
kbuild: move -Wunused-const-variable to W=1 warning level
Revert "scsi: fix soft lockup in scsi_remove_target() on module removal"
scsi: Add intermediate STARGET_REMOVE state to scsi_target_state
hpfs: implement the show_options method
hpfs: fix remount failure when there are no options changed
UBI: Fix static volume checks when Fastmap is used
SIGNAL: Move generic copy_siginfo() to signal.h
thunderbolt: Fix double free of drom buffer
IB/srp: Fix a debug kernel crash
ALSA: hda - Fix headset mic detection problem for one Dell machine
ALSA: hda/realtek - Add support for ALC295/ALC3254
ALSA: hda - Fix headphone noise on Dell XPS 13 9360
ALSA: hda/realtek - New codecs support for ALC234/ALC274/ALC294
mcb: Fixed bar number assignment for the gdd
clk: bcm2835: add locking to pll*_on/off methods
locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()
serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
serial: 8250_mid: recognize interrupt source in handler
serial: 8250_mid: use proper bar for DNV platform
serial: 8250_pci: fix divide error bug if baud rate is 0
Fix OpenSSH pty regression on close
tty/serial: atmel: fix hardware handshake selection
TTY: n_gsm, fix false positive WARN_ON
tty: vt, return error when con_startup fails
xen/x86: actually allocate legacy interrupts on PV guests
KVM: x86: mask CPUID(0xD,0x1).EAX against host value
MIPS: KVM: Fix timer IRQ race when writing CP0_Compare
MIPS: KVM: Fix timer IRQ race when freezing timer
KVM: x86: fix ordering of cr0 initialization code in vmx_cpu_reset
KVM: MTRR: remove MSR 0x2f8
staging: comedi: das1800: fix possible NULL dereference
usb: gadget: udc: core: Fix argument of dev_err() in usb_gadget_map_request()
USB: leave LPM alone if possible when binding/unbinding interface drivers
usb: misc: usbtest: fix pattern tests for scatterlists.
usb: f_mass_storage: test whether thread is running before starting another
usb: gadget: f_fs: Fix EFAULT generation for async read operations
USB: serial: option: add even more ZTE device ids
USB: serial: option: add more ZTE device ids
USB: serial: option: add support for Cinterion PH8 and AHxx
USB: serial: io_edgeport: fix memory leaks in probe error path
USB: serial: io_edgeport: fix memory leaks in attach error path
USB: serial: quatech2: fix use-after-free in probe error path
USB: serial: keyspan: fix use-after-free in probe error path
USB: serial: mxuport: fix use-after-free in probe error path
mei: bus: call mei_cl_read_start under device lock
mei: amthif: discard not read messages
mei: fix NULL dereferencing during FW initiated disconnection
Bluetooth: vhci: Fix race at creating hci device
Bluetooth: vhci: purge unhandled skbs
Bluetooth: vhci: fix open_timeout vs. hdev race
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: longer timeout for long read time quirk
dell-rbtn: Ignore ACPI notifications if device is suspended
ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: mmc: Fix partition switch timeout for some eMMCs
can: fix handling of unmodifiable configuration options
irqchip/gic-v3: Configure all interrupts as non-secure Group-1
irqchip/gic: Ensure ordering between read of INTACK and shared data
Input: pwm-beeper - fix - scheduling while atomic
mfd: omap-usb-tll: Fix scheduling while atomic BUG
sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
clk: qcom: msm8916: Fix crypto clock flags
crypto: sun4i-ss - Replace spinlock_bh by spin_lock_irq{save|restore}
crypto: talitos - fix ahash algorithms registration
crypto: caam - fix caam_jr_alloc() ret code
ring-buffer: Prevent overflow of size in ring_buffer_resize()
ring-buffer: Use long for nr_pages to avoid overflow failures
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
fs/cifs: correctly to anonymous authentication for the NTLM(v2) authentication
fs/cifs: correctly to anonymous authentication for the NTLM(v1) authentication
fs/cifs: correctly to anonymous authentication for the LANMAN authentication
fs/cifs: correctly to anonymous authentication via NTLMSSP
remove directory incorrectly tries to set delete on close on non-empty directories
kvm: arm64: Fix EC field in inject_abt64
arm/arm64: KVM: Enforce Break-Before-Make on Stage-2 page tables
arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str
arm64: Implement pmdp_set_access_flags() for hardware AF/DBM
arm64: Implement ptep_set_access_flags() for hardware AF/DBM
arm64: Ensure pmd_present() returns false after pmd_mknotpresent()
arm64: Fix typo in the pmdp_huge_get_and_clear() definition
ext4: iterate over buffer heads correctly in move_extent_per_page()
perf test: Fix build of BPF and LLVM on older glibc libraries
perf/core: Fix perf_event_open() vs. execve() race
perf/x86/intel/pt: Generate PMI in the STOP region as well
Btrfs: don't use src fd for printk
UPSTREAM: mac80211: fix "warning: ‘target_metric’ may be used uninitialized"
Revert "drivers: power: use 'current' instead of 'get_current()'"
cpufreq: interactive: drop cpufreq_{get,put}_global_kobject func calls
Revert "cpufreq: interactive: build fixes for 4.4"
xt_qtaguid: Fix panic caused by processing non-full socket.
fiq_debugger: Add fiq_debugger.disable option
UPSTREAM: procfs: fixes pthread cross-thread naming if !PR_DUMPABLE
FROMLIST: wlcore: Disable filtering in AP role
Revert "drivers: power: Add watchdog timer to catch drivers which lockup during suspend."
fiq_debugger: Add option to apply uart overlay by FIQ_DEBUGGER_UART_OVERLAY
Revert "Recreate asm/mach/mmc.h include file"
Revert "ARM: Add 'card_present' state to mmc_platfrom_data"
usb: dual-role: make stub functions inline
Revert "mmc: Add status IRQ and status callback function to mmc platform data"
quick selinux support for tracefs
Revert "hid-multitouch: Filter collections by application usage."
Revert "HID: steelseries: validate output report details"
xt_qtaguid: Fix panic caused by synack processing
Revert "mm: vmscan: Add a debug file for shrinkers"
Revert "SELinux: Enable setting security contexts on rootfs inodes."
Revert "SELinux: build fix for 4.1"
fuse: Add support for d_canonical_path
vfs: change d_canonical_path to take two paths
android: recommended.cfg: remove CONFIG_UID_STAT
netfilter: xt_qtaguid: seq_printf fixes
Revert "misc: uidstat: Adding uid stat driver to collect network statistics."
Revert "net: activity_stats: Add statistics for network transmission activity"
Revert "net: activity_stats: Stop using obsolete create_proc_read_entry api"
Revert "misc: uidstat: avoid create_stat() race and blockage."
Revert "misc: uidstat: Remove use of obsolete create_proc_read_entry api"
Revert "misc seq_printf fixes for 4.4"
Revert "misc: uid_stat: Include linux/atomic.h instead of asm/atomic.h"
Revert "net: socket ioctl to reset connections matching local address"
Revert "net: fix iterating over hashtable in tcp_nuke_addr()"
Revert "net: fix crash in tcp_nuke_addr()"
Revert "Don't kill IPv4 sockets when killing IPv6 sockets was requested."
Revert "tcp: Fix IPV6 module build errors"
android: base-cfg: remove CONFIG_SWITCH
Revert "switch: switch class and GPIO drivers."
Revert "drivers: switch: remove S_IWUSR from dev_attr"
ANDROID: base-cfg: enable CONFIG_IP_NF_NAT
BACKPORT: selinux: restrict kernel module loading
android: base-cfg: enable CONFIG_QUOTA
Conflicts:
Documentation/sysctl/kernel.txt
drivers/cpufreq/cpufreq_interactive.c
drivers/hwtracing/coresight/Kconfig
drivers/hwtracing/coresight/Makefile
drivers/hwtracing/coresight/coresight-etm4x.c
drivers/hwtracing/coresight/coresight-etm4x.h
drivers/hwtracing/coresight/coresight-priv.h
drivers/hwtracing/coresight/coresight-stm.c
drivers/hwtracing/coresight/coresight-tmc.c
drivers/mmc/core/core.c
include/linux/coresight-stm.h
include/linux/coresight.h
include/linux/msm_mdp.h
include/uapi/linux/coresight-stm.h
kernel/events/core.c
kernel/sched/fair.c
net/Makefile
net/ipv4/netfilter/arp_tables.c
net/ipv4/netfilter/ip_tables.c
net/ipv4/tcp.c
net/ipv6/netfilter/ip6_tables.c
net/netfilter/xt_quota2.c
sound/core/pcm.c
Change-Id: I17aa0002815014e9bddc47e67769a53c15768a99
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Add support for USB atomic notifier callbacks when host controller
drivers reports death of controller on some fatal error.
Current implementation doesn't help to recover from this condition.
Controller platform drivers can register for this callback and take
necessary steps to reset and add hcd again.
CRs-fixed: 1048766
Change-Id: Ie9064e669424096fee8c35cddccab29faf60cc6b
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
dma address of secondary event ring, transfer ring and
device context base address are required to pass to
remote entity. Remote entity uses these addresses to
program xhci controller registers.
Change-Id: Ie0756d646a396a11b41b93e886bca9aff636ee5d
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Implement APIs to dynamically allocate and free secondary
event rings based upon interrupter number. Also add exported
APIs in usb core layer which allows secondary event ring
management via remote processor entity.
Change-Id: I5ee7d44d6cad8e35e22d3c1a027a1eec5d208585
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
commit 6fb650d43da3e7054984dc548eaa88765a94d49f upstream.
When a USB driver is bound to an interface (either through probing or
by claiming it) or is unbound from an interface, the USB core always
disables Link Power Management during the transition and then
re-enables it afterward. The reason is because the driver might want
to prevent hub-initiated link power transitions, in which case the HCD
would have to recalculate the various LPM parameters. This
recalculation takes place when LPM is re-enabled and the new
parameters are sent to the device and its parent hub.
However, if the driver does not want to prevent hub-initiated link
power transitions then none of this work is necessary. The parameters
don't need to be recalculated, and LPM doesn't need to be disabled and
re-enabled.
It turns out that disabling and enabling LPM can be time-consuming,
enough so that it interferes with user programs that want to claim and
release interfaces rapidly via usbfs. Since the usbfs kernel driver
doesn't set the disable_hub_initiated_lpm flag, we can speed things up
and get the user programs to work by leaving LPM alone whenever the
flag isn't set.
And while we're improving the way disable_hub_initiated_lpm gets used,
let's also fix its kerneldoc.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Matthew Giassa <matthew@giassa.net>
CC: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf5ce5bf3cc7136fd7fe5e8999a580bc93a9c8f6 upstream.
Commit 655fe4effe ("usbcore: add sysfs support to xHCI usb3
hardware LPM") introduced usb3_hardware_lpm sysfs node. This
doesn't show the correct status of USB3 U1 and U2 LPM status.
This patch fixes this by replacing usb3_hardware_lpm with two
nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2
(for U2), and recording the U1/U2 LPM status in right places.
This patch should be back-ported to kernels as old as 4.3,
that contains Commit 655fe4effe ("usbcore: add sysfs support
to xHCI usb3 hardware LPM").
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a device supports usb 3.1 SupeerSpeedPlus Gen2 speeds it povides
a SuperSpeedPlus device capability descriptor as a part of its
BOS descriptor. If we find one while parsing the BOS then save it
togeter with the other device capabilities found in the BOS
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The attribute authorized shows the authorization state for an interface.
Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every USB Host controller should use this new
macro to define for how long resume signalling
should be driven on the bus.
Currently, almost every single USB controller
is using a 20ms timeout for resume signalling.
That's problematic for two reasons:
a) sometimes that 20ms timer expires a little
before 20ms, which makes us fail certification
b) some (many) devices actually need more than
20ms resume signalling.
Sure, in case of (b) we can state that the device
is against the USB spec, but the fact is that
we have no control over which device the certification
lab will use. We also have no control over which host
they will use. Most likely they'll be using a Windows
PC which, again, we have no control over how that
USB stack is written and how long resume signalling
they are using.
At the end of the day, we must make sure Linux passes
electrical compliance when working as Host or as Device
and currently we don't pass compliance as host because
we're driving resume signallig for exactly 20ms and
that confuses certification test setup resulting in
Certification failure.
Cc: <stable@vger.kernel.org> # v3.10+
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The USB stack provides a mechanism for drivers to request an
asynchronous device reset (usb_queue_reset_device()). The mechanism
uses a work item (reset_ws) embedded in the usb_interface structure
used by the driver, and the reset is carried out by a work queue
routine.
The asynchronous reset can race with driver unbinding. When this
happens, we try to cancel the queued reset before unbinding the
driver, on the theory that the driver won't care about any resets once
it is unbound.
However, thanks to the fact that lockdep now tracks work queue
accesses, this can provoke a lockdep warning in situations where the
device reset causes another interface's driver to be unbound; see
http://marc.info/?l=linux-usb&m=141893165203776&w=2
for an example. The reason is that the work routine for reset_ws in
one interface calls cancel_queued_work() for the reset_ws in another
interface. Lockdep thinks this might lead to a work routine trying to
cancel itself. The simplest solution is not to cancel queued resets
when unbinding drivers.
This means we now need to acquire a reference to the usb_interface
when queuing a reset_ws work item and to drop the reference when the
work routine finishes. We also need to make sure that the
usb_interface structure doesn't outlive its parent usb_device; this
means acquiring and dropping a reference when the interface is created
and destroyed.
In addition, cancelling a queued reset can fail (if the device is in
the middle of an earlier reset), and this can cause usb_reset_device()
to try to rebind an interface that has been deallocated (see
http://marc.info/?l=linux-usb&m=142175717016628&w=2 for details).
Acquiring the extra references prevents this failure.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reported-by: Olivier Sobrie <olivier@sobrie.be>
Tested-by: Olivier Sobrie <olivier@sobrie.be>
Cc: stable <stable@vger.kernel.org> # 3.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The descriptor member `bNumEndpoints' is plural.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so quite a few
depend on CONFIG_PM (or even dropped in some cases).
Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code
and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this patch, USB activity can be signaled by blinking a LED. There
are two triggers, one for activity on USB host and one for USB gadget.
Both triggers should work with all host/device controllers. Tested only
with musb.
Performace: I measured performance overheads on ARM Cortex-A8 (TI
AM335x) running on 600 MHz.
Duration of usb_led_activity():
- with no LED attached to the trigger: 2 ± 1 µs
- with one GPIO LED attached to the trigger: 2 ± 1 µs or 8 ± 2 µs (two peaks in histogram)
Duration of functions calling usb_led_activity() (with this patch
applied and no LED attached to the trigger):
- __usb_hcd_giveback_urb(): 10 - 25 µs
- usb_gadget_giveback_request(): 2 - 6 µs
Signed-off-by: Michal Sojka <sojka@merica.cz>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch creates a separate instance of the usb_address0 mutex for each USB
bus, and attaches it to the usb_bus device struct. This allows devices on
separate buses to be enumerated in parallel; saving time.
In the current code, there is a single, global instance of the usb_address0
mutex which is used for all devices on all buses. This isn't completely
necessary, as this mutex is only needed to prevent address0 collisions for
devices on the *same* bus (usb 2.0 spec, sec 4.6.1). This superfluous coverage
can cause additional delay in system resume on systems with multiple hosts
(up to several seconds depending on what devices are attached).
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big USB pull request for 3.15-rc1.
The normal set of patches, lots of controller driver updates, and a
smattering of individual USB driver updates as well.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7AbcACgkQMUfUDdst+ymbZACgncdbZyPsVZ7ZUpBFNbO/vBVT
T9UAmwciojEzjh7b+x4ylsWH+O3LWVN3
=RpAF
-----END PGP SIGNATURE-----
Merge tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg KH:
"Here's the big USB pull request for 3.15-rc1.
The normal set of patches, lots of controller driver updates, and a
smattering of individual USB driver updates as well.
All have been in linux-next for a while"
* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
xhci: Transition maintainership to Mathias Nyman.
USB: disable reset-resume when USB_QUIRK_RESET is set
USB: unbind all interfaces before rebinding any
usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
usb: gadget: tcm_usb_gadget: stop format strings
usb: gadget: f_fs: add missing spinlock and mutex unlock
usb: gadget: composite: switch over to ERR_CAST()
usb: gadget: inode: switch over to memdup_user()
usb: gadget: f_subset: switch over to PTR_RET
usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
USB: keyspan: remove dead debugging code
USB: serial: add missing newlines to dev_<level> messages.
USB: serial: add missing braces
USB: serial: continue to write on errors
USB: serial: continue to read on errors
USB: serial: make bulk_out_size a lower limit
USB: cypress_m8: fix potential scheduling while atomic
devicetree: bindings: document lsi,zevio-usb
usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
...
Since it is needed outside usbcore and exposed in include/linux/usb.h,
it conflicts with enum dev_state in rt2x00 wireless driver.
Mark it as usb specific to avoid conflicts in the future.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A device should not be able to be used concurrently both by
the server and the client. Claiming the port used by the
shared device ensures no interface drivers bind to it and
that it is not usable from the server.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a preparation patch for adding support for bulk streams to usbfs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
So that it can be used in other places too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
This reverts commit 35773dac5f. It's a
hack that caused regressions in the usb-storage and userspace USB
drivers that use usbfs and libusb. Commit 70cabb7d992f "xhci 1.0: Limit
arbitrarily-aligned scatter gather." should fix the issues seen with the
ax88179_178a driver on xHCI 1.0 hosts, without causing regressions.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org # 3.12
This driver was previously an interface driver. Since USB/IP
exports a whole device, not just an interface, it would make
sense to be a device driver.
This patch also modifies the way userspace sees and uses a
shared device:
* the usbip_status file is no longer created for interface 0, but for
the whole device (such as
/sys/devices/pci0000:00/0000:00:01.2/usb1/1-1/usbip_status).
* per interface information, such as interface class or protocol, is
no longer sent/received; only device specific information is
transmitted.
* since the driver was moved one level below in the USB architecture,
there is no need to bind/unbind each interface, just the device as a
whole.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Often, usb drivers need some driver_info to get a device to work. To
have access to driver_info when using new_id, allow to pass a reference
vendor:product tuple from which new_id will inherit driver_info.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Section 4.11.7.1 of rev 1.0 of the xhci specification states that a link TRB
can only occur at a boundary between underlying USB frames (512 bytes for
high speed devices).
If this isn't done the USB frames aren't formatted correctly and, for example,
the USB3 ethernet ax88179_178a card will stop sending (while still receiving)
when running a netperf tcp transmit test with (say) and 8k buffer.
This should be a candidate for stable, the ax88179_178a driver defaults to
gso and tso enabled so it passes a lot of fragmented skb to the USB stack.
Notes from Sarah:
Discussion: http://marc.info/?l=linux-usb&m=138384509604981&w=2
This patch fixes a long-standing xHCI driver bug that was revealed by a
change in 3.12 in the usb-net driver. Commit
638c5115a7 "USBNET: support DMA SG" added
support to use bulk endpoint scatter-gather (urb->sg). Only the USB
ethernet drivers trigger this bug, because the mass storage driver sends
sg list entries in page-sized chunks.
This patch only fixes the issue for bulk endpoint scatter-gather. The
problem will still occur for periodic endpoints, because hosts will
interpret no-op transfers as a request to skip a service interval, which
is not what we want.
Luckily, the USB core isn't set up for scatter-gather on isochronous
endpoints, and no USB drivers use scatter-gather for interrupt
endpoints. Document this known limitation so that developers won't try
to use urb->sg for interrupt endpoints until this issue is fixed. The
more comprehensive fix would be to allow link TRBs in the middle of the
endpoint ring and revert this patch, but that fix would touch too much
code to be allowed in for stable.
This patch should be backported to kernels as old as 3.12, that contain
the commit 638c5115a7 "USBNET: support DMA
SG". Without this patch, the USB network device gets wedged, and stops
sending packets. Mark Lord confirms this patch fixes the regression:
http://marc.info/?l=linux-netdev&m=138487107625966&w=2
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Mark Lord <mlord@pobox.com>
Cc: stable@vger.kernel.org
How it's supposed to work:
--------------------------
USB 2.0 Link PM is a lower power state that some newer USB 2.0 devices
support. USB 3.0 devices certified by the USB-IF are required to
support it if they are plugged into a USB 2.0 only port, or a USB 2.0
cable is used. USB 2.0 Link PM requires both a USB device and a host
controller that supports USB 2.0 hardware-enabled LPM.
USB 2.0 Link PM is designed to be enabled once by software, and the host
hardware handles transitions to the L1 state automatically. The premise
of USB 2.0 Link PM is to be able to put the device into a lower power
link state when the bus is idle or the device NAKs USB IN transfers for
a specified amount of time.
...but hardware is broken:
--------------------------
It turns out many USB 3.0 devices claim to support USB 2.0 Link PM (by
setting the LPM bit in their USB 2.0 BOS descriptor), but they don't
actually implement it correctly. This manifests as the USB device
refusing to respond to transfers when it is plugged into a USB 2.0 only
port under the Haswell-ULT/Lynx Point LP xHCI host.
These devices pass the xHCI driver's simple test to enable USB 2.0 Link
PM, wait for the port to enter L1, and then bring it back into L0. They
only start to break when L1 entry is interleaved with transfers.
Some devices then fail to respond to the next control transfer (usually
a Set Configuration). This results in devices never enumerating.
Other mass storage devices (such as a later model Western Digital My
Passport USB 3.0 hard drive) respond fine to going into L1 between
control transfers. They ACK the entry, come out of L1 when the host
needs to send a control transfer, and respond properly to those control
transfers. However, when the first READ10 SCSI command is sent, the
device NAKs the data phase while it's reading from the spinning disk.
Eventually, the host requests to put the link into L1, and the device
ACKs that request. Then it never responds to the data phase of the
READ10 command. This results in not being able to read from the drive.
Some mass storage devices (like the Corsair Survivor USB 3.0 flash
drive) are well behaved. They ACK the entry into L1 during control
transfers, and when SCSI commands start coming in, they NAK the requests
to go into L1, because they need to be at full power.
Not all USB 3.0 devices advertise USB 2.0 link PM support. My Point
Grey USB 3.0 webcam advertises itself as a USB 2.1 device, but doesn't
have a USB 2.0 BOS descriptor, so we don't enable USB 2.0 Link PM. I
suspect that means the device isn't certified.
What do we do about it?
-----------------------
There's really no good way for the kernel to test these devices.
Therefore, the kernel needs to disable USB 2.0 Link PM by default, and
distros will have to enable it by writing 1 to the sysfs file
/sys/bus/usb/devices/../power/usb2_hardware_lpm. Rip out the xHCI Link
PM test, since it's not sufficient to detect these buggy devices, and
don't automatically enable LPM after the device is addressed.
This patch should be backported to kernels as old as 3.11, that
contain the commit a558ccdcc7 "usb: xhci:
add USB2 Link power management BESL support". Without this fix, some
USB 3.0 devices will not enumerate or work properly under USB 2.0 ports
on Haswell-ULT systems.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
usb_wait_anchor_empty_timeout() should wait till the completion handler
has run. Both the zd1211rw driver and the uas driver (in its task mgmt) depend
on the completion handler having completed when usb_wait_anchor_empty_timeout()
returns, as they read state set by the completion handler after an
usb_wait_anchor_empty_timeout() call.
But __usb_hcd_giveback_urb() calls usb_unanchor_urb before calling the
completion handler. This is necessary as the completion handler may
re-submit and re-anchor the urb. But this introduces a race where the state
these drivers want to read has not been set yet by the completion handler
(this race is easily triggered with the uas task mgmt code).
I've considered adding an anchor_count to struct urb, which would be
incremented on anchor and decremented on unanchor, and then only actually
do the anchor / unanchor on 0 -> 1 and 1 -> 0 transtions, combined with
moving the unanchor call in hcd_giveback_urb to after calling the completion
handler. But this will only work if urb's are only re-anchored to the same
anchor as they were anchored to before the completion handler ran.
And at least one driver re-anchors to another anchor from the completion
handler (rtlwifi).
So I have come up with this patch instead, which adds the ability to
suspend wakeups of usb_wait_anchor_empty_timeout() waiters to the usb_anchor
functionality, and uses this in __usb_hcd_giveback_urb() to delay wake-ups
until the completion handler has run.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And do so in a way which ensures that any fields added in the future will
also get properly zero-ed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hcd-driver free_streams method can return an error, so lets properly
propagate that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some host controllers(such as xHCI) can support building
packet from discontinuous buffers, so introduce one flag
and helper for this kind of host controllers, then the
feature can help some applications(such as usbnet) by
supporting arbitrary length of sg buffers.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When building the htmldocs (in verbose mode), scripts/kernel-doc reports the
following type of warnings:
Warning(drivers/usb/core/usb.c:76): No description found for return value of
'usb_find_alt_setting'
Fix them by:
- adding some missing descriptions of return values
- using "Return" sections for those descriptions
Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bInterval must be within the range 1 - 16
when running at High/Super speed, and within
the range 1 - 255 when running at Full/Low speed.
In order to catch drivers passing a too
large bInterval on Super/High speed scenarios
(thus overflowing urb->interval), let's clamp()
the argument to the allowed ranges.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB spec stats that short packet can only appear at the end
of transfer. Because lost of HC(EHCI/UHCI/OHCI/...) can't
build a full packet from discontinuous buffers, we introduce
the limit in usb_submit_urb() to avoid such kind of bad sg buffers
coming from driver.
The limit might be a bit strict:
- platform has iommu to do sg list mapping
- some host controllers may support to build full packet from
discontinuous buffers.
But considered that most of HCs don't support that, and driver
need work well or keep consistent on different HCs and ARCHs, we
have to introduce the limit.
Currently, only usbtest is reported to pass such sg buffers to HC,
and other users(mass storage, usbfs) don't have the problem.
We don't check it on USB wireless device, because:
- wireless devices can't be attached to common USB
bus(EHCI/UHCI/OHCI/...)
- the max packet size of endpoint may be odd, and often can't
devide 4KB which is a typical usage in usb mass storage application
Reported-by: Konstantin Filatov <kfilatov@parallels.com>
Reported-by: Denis V. Lunev <den@openvz.org>
Cc: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB_MAXCHILDREN symbol is used in include/uapi/linux/usb/ch11.h, a
user-mode header, even though it is defined in include/linux/usb.h,
which is kernel-only. This causes compile-time errors when user
programs try to #include linux/usb/ch11.h.
This patch fixes the problem by moving the definition of USB_MAXCHILDREN
into ch11.h. It also gets rid of unneeded parentheses.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds abitilty to tune L1 timeout (inactivity timer for usb2 link sleep)
and BESL (best effort service latency)via sysfs.
This also adds a new usb2_lpm_parameters structure with those variables to
struct usb_device.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
usb 2.0 devices with link power managment (LPM) can describe their idle link
timeouts either in BESL or HIRD format, so far xHCI has only supported HIRD but
later xHCI errata add BESL support as well
BESL timeouts need to inform exit latency changes with an evaluate
context command the same way USB 3.0 link PM code does.
The same xhci_change_max_exit_latency() function is used as with USB3
but code is pulled out from #ifdef CONFIG_PM as USB2.0 BESL LPM
funcionality does not depend on CONFIG_PM.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
The current EHCI code sleeps a flat 110ms in the resume path if there
was a USB 1.1 device connected to its companion controller during
suspend, waiting for the device to reappear and reset so that it can be
handed back to the companion. This is necessary if the device uses
persist, so that the companion controller can actually see it during its
own resume path.
However, if the device doesn't use persist, this is entirely
unnecessary. We might just as well ignore it and have the normal device
detection/reset/handoff code handle it asynchronously when it eventually
shows up. As USB 1.1 devices are almost exclusively HIDs these days (for
which persist has no value), this can allow distros to shave another
tenth of a second off their resume time.
In order to enable this optimization, the patch also adds a new
usb_for_each_dev() iterator that is exported by the USB core and wraps
bus_for_each_dev() with the logic to differentiate between struct
usb_device and struct usb_interface on the usb_bus_type bus.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially
replacing it everywhere with CONFIG_PM_RUNTIME (except for one place
in hub.c, where it is replaced with CONFIG_PM because the code needs
to be used in both runtime and system PM). The net result is code
shrinkage and simplification.
There's very little point in keeping CONFIG_USB_SUSPEND because almost
everybody enables it. The few that don't will find that the usbcore
module has gotten somewhat bigger and they will have to take active
measures if they want to prevent hubs from being runtime suspended.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds comments on interface driver suspend callback
to emphasize that the failure return value is ignored by
USB core in system sleep context, so do not try to recover
device for this case and let resume/reset_resume callback
handle the suspend failure if needed.
Also kerneldoc for usb_suspend_both() is updated with the
fact.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Agarwal
Srinivasarao P
Mathias Nyman
Hemant Kumar
Blagovest Kolenichev
Chris Bainbridge
Runmin Wang
Manu Gautam
Alan Stern
Lu Baolu
Stefan Koch
Felipe Balbi
Chris Rorvick
Rafael J. Wysocki
Michal Sojka
Todd E Brandt
Linus Torvalds
Valentina Manea
Hans de Goede
Greg Kroah-Hartman
Sarah Sharp
Wolfram Sang
David Laight
Ming Lei
Yacine Belkadi
Julius Werner