refs/heads/tmp-28ec98b:
Linux 4.4.55
ext4: don't BUG when truncating encrypted inodes on the orphan list
dm: flush queued bios when process blocks to avoid deadlock
nfit, libnvdimm: fix interleave set cookie calculation
s390/kdump: Use "LINUX" ELF note name instead of "CORE"
KVM: s390: Fix guest migration for huge guests resulting in panic
mvsas: fix misleading indentation
serial: samsung: Continue to work if DMA request fails
USB: serial: io_ti: fix information leak in completion handler
USB: serial: io_ti: fix NULL-deref in interrupt callback
USB: iowarrior: fix NULL-deref in write
USB: iowarrior: fix NULL-deref at probe
USB: serial: omninet: fix reference leaks at open
USB: serial: safe_serial: fix information leak in completion handler
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: host: xhci-dbg: HCIVERSION should be a binary number
usb: gadget: function: f_fs: pass companion descriptor along
usb: dwc3: gadget: make Set Endpoint Configuration macros safe
usb: gadget: dummy_hcd: clear usb_gadget region before registration
powerpc: Emulation support for load/store instructions on LE
tracing: Add #undef to fix compile error
MIPS: Netlogic: Fix CP0_EBASE redefinition warnings
MIPS: DEC: Avoid la pseudo-instruction in delay slots
mm: memcontrol: avoid unused function warning
cpmac: remove hopeless #warning
MIPS: ralink: Remove unused rt*_wdt_reset functions
MIPS: ralink: Cosmetic change to prom_init().
mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy
MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT change
MIPS: ip22: Fix ip28 build for modern gcc
MIPS: Update ip27_defconfig for SCSI_DH change
MIPS: ip27: Disable qlge driver in defconfig
MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE change
crypto: improve gcc optimization flags for serpent and wp512
USB: serial: digi_acceleport: fix OOB-event processing
USB: serial: digi_acceleport: fix OOB data sanity check
Linux 4.4.54
drivers: hv: Turn off write permission on the hypercall page
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
libceph: use BUG() instead of BUG_ON(1)
drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
fakelb: fix schedule while atomic
drm/atomic: fix an error code in mode_fixup()
drm/ttm: Make sure BOs being swapped out are cacheable
drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS
drm/ast: Call open_key before enable_mmio in POST code
drm/ast: Fix test for VGA enabled
drm/amdgpu: add more cases to DCE11 possible crtc mask setup
mac80211: flush delayed work when entering suspend
xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
pwm: pca9685: Fix period change with same duty cycle
nlm: Ensure callback code also checks that the files match
target: Fix NULL dereference during LUN lookup + active I/O shutdown
ceph: remove req from unsafe list when unregistering it
ktest: Fix child exit code processing
IB/srp: Fix race conditions related to task management
IB/srp: Avoid that duplicate responses trigger a kernel bug
IB/IPoIB: Add destination address when re-queue packet
IB/ipoib: Fix deadlock between rmmod and set_mode
mnt: Tuck mounts under others instead of creating shadow/side mounts.
net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()
s390: use correct input data address for setup_randomness
s390: make setup_randomness work
s390: TASK_SIZE for kernel threads
s390/dcssblk: fix device size calculation in dcssblk_direct_access()
s390/qdio: clear DSCI prior to scanning multiple input queues
Bluetooth: Add another AR3012 04ca:3018 device
KVM: VMX: use correct vmcs_read/write for guest segment selector/base
KVM: s390: Disable dirty log retrieval for UCONTROL guests
serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
tty: n_hdlc: get rid of racy n_hdlc.tbuf
TTY: n_hdlc, fix lockdep false positive
Linux 4.4.53
scsi: lpfc: Correct WQ creation for pagesize
MIPS: IP22: Fix build error due to binutils 2.25 uselessnes.
MIPS: IP22: Reformat inline assembler code to modern standards.
powerpc/xmon: Fix data-breakpoint
dmaengine: ipu: Make sure the interrupt routine checks all interrupts.
bcma: use (get|put)_device when probing/removing device driver
md linear: fix a race between linear_add() and linear_congested()
rtc: sun6i: Switch to the external oscillator
rtc: sun6i: Add some locking
NFSv4: fix getacl ERANGE for some ACL buffer sizes
NFSv4: fix getacl head length estimation
NFSv4: Fix memory and state leak in _nfs4_open_and_get_state
nfsd: special case truncates some more
nfsd: minor nfsd_setattr cleanup
rtlwifi: rtl8192c-common: Fix "BUG: KASAN:
rtlwifi: Fix alignment issues
gfs2: Add missing rcu locking for glock lookup
rdma_cm: fail iwarp accepts w/o connection params
RDMA/core: Fix incorrect structure packing for booleans
Drivers: hv: util: Backup: Fix a rescind processing issue
Drivers: hv: util: Fcopy: Fix a rescind processing issue
Drivers: hv: util: kvp: Fix a rescind processing issue
hv: init percpu_list in hv_synic_alloc()
hv: allocate synic pages for all present CPUs
usb: gadget: udc: fsl: Add missing complete function.
usb: host: xhci: plat: check hcc_params after add hcd
usb: musb: da8xx: Remove CPPI 3.0 quirk and methods
w1: ds2490: USB transfer buffers need to be DMAable
w1: don't leak refcount on slave attach failure in w1_attach_slave_device()
can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
iio: pressure: mpl3115: do not rely on structure field ordering
iio: pressure: mpl115: do not rely on structure field ordering
arm/arm64: KVM: Enforce unconditional flush to PoC when mapping to stage-2
fuse: add missing FR_FORCE
crypto: testmgr - Pad aes_ccm_enc_tv_template vector
ath9k: use correct OTP register offsets for the AR9340 and AR9550
ath9k: fix race condition in enabling/disabling IRQs
ath5k: drop bogus warning on drv_set_key with unsupported cipher
target: Fix multi-session dynamic se_node_acl double free OOPs
target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
samples/seccomp: fix 64-bit comparison macros
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
ext4: fix inline data error paths
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: do not polute the extents cache while shifting extents
ext4: Include forgotten start block on fallocate insert range
loop: fix LO_FLAGS_PARTSCAN hang
block/loop: fix race between I/O and set_status
jbd2: don't leak modified metadata buffers on an aborted journal
Fix: Disable sys_membarrier when nohz_full is enabled
sd: get disk reference in sd_check_events()
scsi: use 'scsi_device_from_queue()' for scsi_dh
scsi: aacraid: Reorder Adapter status check
scsi: storvsc: properly set residual data length on errors
scsi: storvsc: properly handle SRB_ERROR when sense message is present
scsi: storvsc: use tagged SRB requests if supported by the device
dm stats: fix a leaked s->histogram_boundaries array
dm cache: fix corruption seen when using cache > 2TB
ipc/shm: Fix shmat mmap nil-page protection
mm: do not access page->mapping directly on page_endio
mm: vmpressure: fix sending wrong events on underflow
mm/page_alloc: fix nodes for reclaim in fast path
iommu/vt-d: Tylersburg isoch identity map check is done too late.
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
regulator: Fix regulator_summary for deviceless consumers
staging: rtl: fix possible NULL pointer dereference
ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
ALSA: seq: Fix link corruption by event error handling
ALSA: ctxfi: Fallback DMA mask to 32bit
ALSA: timer: Reject user params with too small ticks
ALSA: hda - fix Lewisburg audio issue
ALSA: hda/realtek - Cannot adjust speaker's volume on a Dell AIO
ARM: dts: at91: Enable DMA on sama5d2_xplained console
ARM: dts: at91: Enable DMA on sama5d4_xplained console
ARM: at91: define LPDDR types
media: fix dm1105.c build error
uvcvideo: Fix a wrong macro
am437x-vpfe: always assign bpp variable
MIPS: Handle microMIPS jumps in the same way as MIPS32/MIPS64 jumps
MIPS: Calculate microMIPS ra properly when unwinding the stack
MIPS: Fix is_jump_ins() handling of 16b microMIPS instructions
MIPS: Fix get_frame_info() handling of microMIPS function size
MIPS: Prevent unaligned accesses during stack unwinding
MIPS: Clear ISA bit correctly in get_frame_info()
MIPS: Lantiq: Keep ethernet enabled during boot
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
MIPS: Fix special case in 64 bit IP checksumming.
samples: move mic/mpssd example code from Documentation
Linux 4.4.52
kvm: vmx: ensure VMCS is current while enabling PML
Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"
rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down
block: fix double-free in the failure path of cgwb_bdi_init()
goldfish: Sanitize the broken interrupt handler
x86/platform/goldfish: Prevent unconditional loading
USB: serial: ark3116: fix register-accessor error handling
USB: serial: opticon: fix CTS retrieval at open
USB: serial: spcp8x5: fix modem-status handling
USB: serial: ftdi_sio: fix line-status over-reporting
USB: serial: ftdi_sio: fix extreme low-latency setting
USB: serial: ftdi_sio: fix modem-status error handling
USB: serial: cp210x: add new IDs for GE Bx50v3 boards
USB: serial: mos7840: fix another NULL-deref at open
tty: serial: msm: Fix module autoload
net: socket: fix recvmmsg not returning error from sock_error
ip: fix IP_CHECKSUM handling
irda: Fix lockdep annotations in hashbin_delete().
dccp: fix freeing skb too early for IPV6_RECVPKTINFO
packet: Do not call fanout_release from atomic contexts
packet: fix races in fanout_add()
net/llc: avoid BUG_ON() in skb_orphan()
blk-mq: really fix plug list flushing for nomerge queues
rtc: interface: ignore expired timers when enqueuing new timers
rtlwifi: rtl_usb: Fix missing entry in USB driver's private data
Linux 4.4.51
mmc: core: fix multi-bit bus width without high-speed mode
bcache: Make gc wakeup sane, remove set_task_state()
ntb_transport: Pick an unused queue
NTB: ntb_transport: fix debugfs_remove_recursive
printk: use rcuidle console tracepoint
ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
futex: Move futex_init() to core_initcall
drm/dp/mst: fix kernel oops when turning off secondary monitor
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
Input: elan_i2c - add ELAN0605 to the ACPI table
Fix missing sanity check in /dev/sg
scsi: don't BUG_ON() empty DMA transfers
fuse: fix use after free issue in fuse_dev_do_read()
siano: make it work again with CONFIG_VMAP_STACK
vfs: fix uninitialized flags in splice_to_pipe()
Linux 4.4.50
l2tp: do not use udp_ioctl()
ping: fix a null pointer dereference
packet: round up linear to header len
net: introduce device min_header_len
sit: fix a double free on error path
sctp: avoid BUG_ON on sctp_wait_for_sndbuf
mlx4: Invoke softirqs after napi_reschedule
macvtap: read vnet_hdr_size once
tun: read vnet_hdr_sz once
tcp: avoid infinite loop in tcp_splice_read()
ipv6: tcp: add a missing tcp_v6_restore_cb()
ip6_gre: fix ip6gre_err() invalid reads
netlabel: out of bound access in cipso_v4_validate()
ipv4: keep skb->dst around in presence of IP options
net: use a work queue to defer net_disable_timestamp() work
tcp: fix 0 divide in __tcp_select_window()
ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
ipv6: fix ip6_tnl_parse_tlv_enc_lim()
can: Fix kernel panic at security_sock_rcv_skb
Conflicts:
drivers/scsi/sd.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/host/xhci-plat.c
CRs-Fixed: 2023471
Change-Id: I396051a8de30271af77b3890d4b19787faa1c31e
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit 61cd1b4cd1e8f7f7642ab64529d9bd52e8374641 upstream.
ds2490 driver was doing USB transfers from / to buffers on a stack.
This is not permitted and made the driver non-working with vmapped stacks.
Since all these transfers are done under the same bus_mutex lock we can
simply use shared buffers in a device private structure for two most common
of them.
While we are at it, let's also fix a comparison between int and size_t in
ds9490r_search() which made the driver spin in this function if state
register get requests were failing.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2ce4ea1a0b0162e5d2d7e7942ab6f5cc2063d5a upstream.
Near the beginning of w1_attach_slave_device() we increment a w1 master
reference count.
Later, when we are going to exit this function without actually attaching
a slave device (due to failure of __w1_attach_slave_device()) we need to
decrement this reference count back.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: 9fcbbac5de ("w1: process w1 netlink commands in w1_process thread")
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conflicts:
in fs/proc/task_mmu.c:
looks like vma_get_anon_name() want have a name for anonymous
vma when there is no name used in vma. commit: 586278d78b
The name show is after any other names, so it maybe covered.
but anyway, it just a show here.
commit ecfaf0c42fc4306b5ec4bf6be01b66f8fe9a9733 upstream.
Commit e93762bbf6 ("w1: masters: omap_hdq: add support for 1-wire
mode") added a statement to clear the hdq_irqstatus flags in
hdq_read_byte().
If the hdq reading process is scheduled slowly or interrupts are
disabled for a while the hardware read activity might already be
finished on entry of hdq_read_byte(). And hdq_isr() already has set the
hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the
TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel.
This means there is no need to wait and the hdq_read_byte() can just
read the byte from the hdq controller.
By resetting hdq_irqstatus to 0 the read process is forced to be always
waiting again (because the if statement always succeeds) but the
hardware will not issue another RXCOMPLETE interrupt. This results in a
false timeout.
After such a situation the hdq bus hangs.
Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.com
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Place SLPZ pin in sleep state at system suspend time if a GPIO is
provided by board platform data.
Change-Id: I93c61fa0ae474e968e0f909209c9bfcaafe3dd2c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Let's stop using legacy platform driver hooks for power management and
switch to using the standard dev_pm_ops-based hooks.
Also, instead of guarding PM methods with #ifdef CONFIG_PM annotate them
as __maybe_unused as it provides better compile coverage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patches makes following changes to omap_hdq driver
- Enable 1-wire mode.
- Implement w1_triplet callback to facilitate search rom
procedure and auto detection of 1-wire slaves.
- Proper enabling and disabling of interrupt.
- Cleanups (formatting and return value checks).
HDQ mode remains unchanged.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, memsetting and kfreeing the device is bad behaviour. The
device will have a reference count of 1 and hence can cause trouble
because it has kfree'd. Proper way to handle a failed device_register is
to call put_device right after it fails.
Signed-off-by: Levente Kurusa <levex@linux.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When initialized as a platform device the initializer must now specify
a device. An empty device name is no longer valid.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Use module_pci_driver for drivers whose init and exit functions
only register and unregister, respectively.
A simplified version of the Coccinelle semantic patch that performs
this transformation is as follows:
@a@
identifier f, x;
@@
-static f(...) { return pci_register_driver(&x); }
@b depends on a@
identifier e, a.x;
@@
-static e(...) { pci_unregister_driver(&x); }
@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);
@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_pci_driver;
@@
-module_exit(e);
+module_pci_driver(x);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed there was a problem here because Smatch complained:
drivers/w1/slaves/w1_therm.c:416 w1_seq_show() warn:
inconsistent returns 'mutex:&sl->master->mutex'.
Locked on: line 416
Unlocked on: line 413
The problem is that we lock ->mutex but we unlock ->bus_mutex on error.
David Fries says that ->bus_mutex is correct and ->mutex is incorrect.
Fixes: d9411e57dc ('w1: Add support for DS28EA00 sequence to w1-therm')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The W1_42_FINISHED_BYTE is 0xFF so the cast means the condition is
never true.
Fixes: d9411e57dc ('w1: Add support for DS28EA00 sequence to w1-therm')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add i2c alias to enable autoloading of the module for device specified
in device-tree.
Signed-off-by: Ludek Hlavacek <ludek_h@seznam.cz>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides support for the DS28EA00 digital thermometer.
The DS28EA00 provides an additional two pins for implementing a sequence
detection algorithm. This feature allows you to determine the physical
location of the chip in the 1-wire bus without needing pre-existing
knowledge of the bus ordering. Support is provided through the sysfs
w1_seq file. The file will contain a single line with an integer value
representing the device index in the bus starting at 0.
Signed-off-by: Matt Campbell <mattrcampbell@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A temperature conversion can take 750 ms and when possible the
w1_therm slave driver drops the bus_mutex to allow other bus
operations, but that includes operations such as a periodic slave
search, which can remove this slave when it is no longer detected.
If that happens the sl->family_data will be freed and set to NULL
causing w1_slave_show to crash when it wakes up.
Signed-off-by: David Fries <David@Fries.net>
Reported-By: Thorsten Bschorr <thorsten@bschorr.de>
Tested-by: Thorsten Bschorr <thorsten@bschorr.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of 1-Wire devices commonly associated with physical access control
systems are attached/generate presence for as short as 100 ms - hence
the tens-to-hundreds milliseconds scan intervals are required.
Signed-off-by: Dmitry Khromov <dk@icelogic.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a new
subsystem, "coresight" has been added. Full details are in the
shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSODosACgkQMUfUDdst+ykSNwCfcqx1Z3rQzbLwSrR2sa1fV3Zb
yEAAniJoLZ4ZkoQK4/1ozsFc31q+gXNm
=/epr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver update for 3.19-rc1
Lots of little things all over the place in different drivers, and a
new subsystem, "coresight" has been added. Full details are in the
shortlog"
* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
parport: parport_pc, do not remove parent devices early
spmi: Remove shutdown/suspend/resume kernel-doc
carma-fpga-program: drop videobuf dependency
carma-fpga: drop videobuf dependency
carma-fpga-program.c: fix compile errors
i8k: Fix temperature bug handling in i8k_get_temp()
cxl: Name interrupts in /proc/interrupt
CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
coresight-replicator: remove .owner field for driver
coresight: fixed comments in coresight.h
coresight: fix typo in comment in coresight-priv.h
coresight: bindings for coresight drivers
coresight: Adding ABI documentation
w1: support auto-load of w1_bq27000 module.
w1: avoid potential u16 overflow
cn: verify msg->len before making callback
mei: export fw status registers through sysfs
mei: read and print all six FW status registers
mei: txe: add cherrytrail device id
mei: kill cached host and me csr values
...
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
1/ change request_module call to zero-pad single digit
family numbers. This appears to be the intention of
the code, but not what it actually does.
This means that the alias created for W1_FAMILY_SMEM_01
might actually be useful.
2/ Define a family name for the BQ27000 battery charge monitor.
Unfortunately this is the same number as W1_FAMILY_SMEM_01
so if both a compiled on a system, one module might need to
be blacklisted.
3/ Add a MODULE_ALIAS for the bq27000.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver has no 'compatible' string and so is not found when
using device-tree.
Add one with value to match
hdqw1w: 1w@480b2000 {
device in omap3.dtsi.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from 0x81: err=-110.
[ 31.504168] 0x81: count=-110, status:
[ 31.613404] Failed to read 1-wire data from 0x81: err=-110.
[ 31.621915] 0x81: count=-110, status:
[ 43.260968] Failed to read 1-wire data from 0x81: err=-110.
[ 43.270998] 0x81: count=-110, status:
[ 43.379959] Failed to read 1-wire data from 0x81: err=-110.
[ 43.388854] 0x81: count=-110, status:
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94859308a2 "w1: new w1_ds2406 driver" added a new driver
that uses the crc16 library, but didn't ensure that the core is
there. This adds the necessary Kconfig statements, just like we
have it for other w1 drivers.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Scott Alfter <scott@alfter.us>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces all calls to the "printk" function within the "masters"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces all calls to the "printk" function within the main "w1"
directory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces all calls to the "printk" function within the "slaves"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:
WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some preliminary work at making use of this driver led me to implement
CRC-16 checks on read and write to deal with the occasional glitchiness of
the 1-Wire bus. The revised driver (attached) returns an I/O error if the
CRC check fails. When reading the chip's state, either you get a valid
indication or you get an I/O error. When changing its state, either the
change is successful or an I/O error is returned.
Signed-off-by: Scott Alfter <scott@alfter.us>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace spaces at beginning of the string with tabs, and replace foo * bar with foo *bar in a pointer declaration.
Signed-off-by: Thomas Wood <tommyandrena@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the i.MX reference manual, the read/write bit operations
takes from 60 us to 120 us.
This patch optimizes mxc_w1_ds2_touch_bit() function to use proper
value for such delay. Nevertheless, a small margin for the timeout has
been added for the case if clock frequency is inaccurate.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a software reset for 1-Wire module at driver startup.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the i.MX reference manual, the reset procedure and
"presence" pulse takes 511 and 512 us, respectively. Measurement for
i.MX27 is about 1100 us. There is no need to wait Reset+Presence
more than this time.
This patch optimizes mxc_w1_ds2_reset_bus() function to use proper
value for delay after w1 bus reset. Nevertheless, a small margin for
the timeout has been added for the case if clock frequency is inaccurate.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W1 reset_bus() should return zero if slave device is present.
This patch fix this issue.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
w1_process_callbacks() expects to be called with dev->list_mutex held,
but it is the fact only in w1_process(). __w1_remove_master_device()
calls w1_process_callbacks() after it releases list_mutex.
The patch fixes __w1_remove_master_device() to acquire list_mutex
for w1_process_callbacks().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: David Fries <david@fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org> # 3.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Applications can submit a set of commands in one packet to the kernel,
and in some cases it is required such as reading the temperature
sensor results. This adds an option W1_CN_BUNDLE to the flags of
cn_msg to request the kernel to reply in one packet for efficiency.
The cn_msg flags now check for unknown flag values and return an error
if one is seen. See "Proper handling of unknown flags in system
calls" http://lwn.net/Articles/588444/
This corrects the ack values returned as per the protocol standard,
namely the original ack for status messages and seq + 1 for all others
such as the data returned from a read.
Some of the common variable names have been standardized as follows.
struct cn_msg *cn
struct w1_netlink_msg *msg
struct w1_netlink_cmd *cmd
struct w1_master *dev
When an argument and a function scope variable would collide, add req_
to the argument.
Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__w1_attach_slave_device calls device_add which calls w1_bus_notify
which calls the w1_bq27000 slave driver, which calls
platform_device_add and device_add and deadlocks on getting
&(&priv->bus_notifier)->rwsem as it is still held in the previous
device_add. This avoids the problem by processing the family
add/remove outside of the slave device_add call.
Commit 47eba33a09 introduced this deadlock and added
a KOBJ_ADD, as the add was already reported in device_register two add
events were being sent. This change suppresses the device_register
add so that any slave device sysfs entries are setup before the add
goes out.
Belisko Marek reported this change fixed the deadlock he was seeing on
ARM device tree, while testing on my x86-64 system never saw the
deadlock.
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the message type is W1_MASTER_CMD or W1_SLAVE_CMD, then a reference
is taken when searching for the slave or master device. If there
isn't any following data m->len (mlen is a copy) is 0 and packing up
the message for later execution is skipped leaving nothing to
decrement the reference counts.
Way back when, m->len was checked before the search that increments the
reference count, but W1_LIST_MASTERS has no additional data, the check
was moved in 9be62e0b2f causing this bug.
This change reorders to put the check before the reference count is
incremented avoiding the problem.
Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helps increasing build testing coverage.
To do this, __raw_{read,write}b() functions was be replaced with
simple {read,write}b() variants.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Remove old and currently wrong address of the FSF from license
parts of the code.
- Remove unused #include and sort remaining headers alphabetically.
- Remove unised definitions.
- Add definitions for bit-fields.
- Add missing module owner field.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix mxc_w1_ds2_reset_bus() return value.
According to i.MX reference manual, "presence status" reflected
in the bit 6 of control register.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Configuration for masters and slaves is included only if W1 symbol
enabled, so no reason to check it once more.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
