As the IMEM approach to store reset reason is deprecated, so use
the spare register in PMIC power-on peripheral to store the oem
restart reason.
Bit-2 to bit-7 of SOFT_RB_SPARE for hard reset reason, so divide
existing range into regions, value 0 to 31 for common defined features
and 32 to 63 values are for OEMs/ODMs specific features.
Change-Id: Ib8e64d6dd5a335325d0469280e41e9d10ec9b893
Signed-off-by: Lijuan Gao <lijuang@codeaurora.org>
Remove synaptics v2.6 touch driver from the kernel code
as it has never been used in any of the recent platforms.
Change-Id: Ibf14dec548a180e517d9b41098af642577c4328b
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Move the qpnp-power-on driver from the drivers/input directory
into the drivers/input/misc directory. This is the standard
location where other power key drivers are kept.
Also make a small fix to use octal instead of symbolic
permissions for the ship_mode_en module parameter.
Change-Id: I4d80c2ca0f161bd443dbfe0fcef822459c9fe44b
Signed-off-by: David Collins <collinsd@codeaurora.org>
During device resume, the touch resume function is called after display's
resume. In this case, the ft5x06's resume function needs to wait for
200ms because of reset requirement. Defer the touch resume to a workqueue
to reduce the total device resume time. For this an optional DT property
is added to enable this on targets that need this feature.
Change-Id: Ib0677ca792aea83ece1caf8a0afff341302747fb
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Signed-off-by: zhaoyuan <yzhao@codeaurora.org>
remove psensor support as the linux/sensors.h file is not yet merged
in msm-3.18 kernel.
Change-Id: I6d46b35938b7420072f9245ffa27bb59f28d5e03
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Focaltech touch controller FT6436 support new feature Screen-off-Gesture.
It is able to turn on the screen by drawing gestures on the touch screen
when the screen is during off status. Enable the FT CTP driver to support
the screen off gesture recognization.
This patch is propagated from msm-3.18 kernel.
'commit 5cc0bff80d65 ("input: ft5x06_ts: add gesture feature support")'
Also cleared the following checkpatch warnings.
- Missing a blank line after declarations
- Missing a blank line after declarations
- Comparisons should place the constant on the right side of the test.
Change-Id: I77d111d3ef800b636a337221d7e605f746a113dd
Signed-off-by: Mao Li <maol@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
During device resume, the touch resume function is called after
display resume. Touch resume function will take about >200ms.
Defer the touch resume function to a workqueue to reduce the total
device resume time. An optional DT property is added to enable this
on targets that need this feature.
This change has been merged. Now, touch driver was updated to V2.6,
so, merge this change to V2.6 driver.
Change-Id: Ica477f35bd4fda59eb49c9b4f5e88b460366c761
Signed-off-by: zhaoyuan <yzhao@codeaurora.org>
Focaltech's CTP FT6436 is able to behave like a proximity sensor.
Enable the driver support this new feature.
Also cleared the chekpatch warning on 3.18 kernel.
Change-Id: I7a6ec3a387536c512637b0bd8dab95e7cceca212
Signed-off-by: Mao Li <maol@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
The firmware image format is changed in CTP FT6436. Also vendor
id and version id are read from fw image from a different offset
as compared to previous controllers. The driver is updated to
support the new image format.
This patch is propagated from msm-3.18 kernel
'commit 6146c68f81b4 ("input: ft5x06_ts: add support for firmware
update for CTP FT6X36")'
Change-Id: I465fdfa73e56e8fc4bbfdde980c558e4715d6d08
Signed-off-by: Mao Li <maol@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Focaltech touchscreen ICs may use different chip IDs for same module.
Add support to ignore ID check for such cases.
This patch is propagated from msm-3.10 kernel
'commit d6e831bdf2af ("input: touchscreen: add option to ignore
Focaltech family-id check")'
Also fix the checkpatch errors.
Change-Id: I0fe8da6a5e687317b4878b59ac5d1a4a4b620e1d
Signed-off-by: Bingzhe Cai <bingzhec@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Upgrade firmware on the controller only when a new
version of firmware is available.
This patch is propagated from msm-3.18 kernel
'commit 88d102ef081f ("input: ft5x06_ts: Upgrade
firmware based on version")'
Change-Id: I4cf75b3c5efb90f151da09ed73b1ba62b9b5bb1c
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
To support all models supported by focaltech push necessary
parameters to platform data.
This patch is propagated from msm-3.18 kernel
'commit 473f8cd84f93 ("input: ft5x06_ts: Parse board specific
parameters from pdata")'
Also fix the below checkpatch warnings on 3.18 Kernel.
WARNING: Possible unnecessary 'out of memory' message
+ if (!data) {
+ dev_err(&client->dev, "Not enough memory\n");
WARNING: Possible unnecessary 'out of memory' message
+ if (!data->ts_info) {
+ dev_err(&client->dev, "Not enough memory\n");
Change-Id: I00b0e8ba7cfc8d8fbd48aa910bd3d0010283ed00
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Add device tree support for focaltech controller driver.
The data is represented in device tree format and parsed
by the driver using of framework apis.
This patch is a propagated patch from 3.18 kernel
'commit 83310a9a151e ("input: ft5x06_ts: Add DT support")'
Change-Id: Ibcdd8c3579f401ac0632d670e1b7c674aa67ba8d
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
[abinayap@codeaurora.org: Fix checkpatch errors for 4.4 kernel
struct of_device_id should normally be const]
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
Clean up the focaltech driver by fixing the following checkpatch
errors.
1. else is not generally useful after a break or return
2. Possible unnecessary 'out of memory' message
3. Using __devexit is unnecessary
4. Unnecessary space before function pointer arguments
This patch is a propagated patch from 3.18 kernel
'commit 2b6ea311a968 ("input: ft5x06_ts: fix checkpatch errors")'
Change-Id: I36ed0497c12b0f14e9d7b60c2d8e78729871b8d0
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
Signed-off-by: Abinaya P <abinayap@codeaurora.org>
Ft5x06 controllers are single chip capacitive
touch panel controller ICs with a built-in 8 bit
Micro Controller Unit. It supports multi-touch
capability and can detect up to five touches.
Change-Id: I39eb1175d473d1f2c463e1c4a0a1606307da9dc0
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
(cherry picked from commit a2595074a6528a1a2d28470c11ed14c21081068c)
Synaptics reference driver V2.6 is being cleaned up to enable touch
controller S332U. Add Kconfig and Makefile changes to enable Synaptics dsx
V2.6 driver's compilation.
CRs-Fixed: 943896
Change-Id: I7e79e9ee321b7a7c90d27f065281dc73cee65391
Signed-off-by: Mao Li <maol@codeaurora.org>
Squash and apply the following changes taken from the msm-3.14
kernel branch as of msm-3.14
commit 8139d0b4e7a6d ("ARM: dts: msm: Set flag to manage clks")
commit c24a3df92a457643cc0821eb9e8f392ae5a907ee
Author: Amy Maloche <amaloche@codeaurora.org>
Date: Thu May 9 10:23:41 2013 -0700
input: gen_vkeys: Make y_offset an optional property
Not all targets will need the y coordinate shifted to
function properly, so set this value as default 0.
Change-Id: I1816433c3601fe099ffb8ee275637e573990e432
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Documentation/devicetree/bindings/input/gen_vkeys.txt
drivers/input/touchscreen/gen_vkeys.c
2 files changed, 13 insertions(+), 5 deletions(-)
commit bb2ac18f8fab38fa12d8a7d8b7ee80d9c0049329
Author: Amy Maloche <amaloche@codeaurora.org>
Date: Wed Apr 17 12:15:56 2013 -0700
vkeys: gen_vkeys: Add key position offset
Add virtual key position offset to match virtual key
positions with front panel.
Change-Id: Ibbf89e816d9654f202b75470df0c673aa42439c8
Acked-by: Chun Zhang <chunz@qti.qualcomm.com>
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Documentation/devicetree/bindings/input/gen_vkeys.txt
drivers/input/touchscreen/gen_vkeys.c
include/linux/input/gen_vkeys.h
3 files changed, 10 insertions(+), 2 deletions(-)
commit 1a6d213cf5a3e40d8b39507e2b010dc81de63630
Author: Mohan Pallaka <mpallaka@codeaurora.org>
Date: Wed Aug 8 11:25:52 2012 +0530
input: Add support for virtual key generation
Virtual keys are used for navigation on Android.
These are not specific to the controller used
in the target but are specific to the target.
Add a module to generate virtual keys independently
of the controller.
Change-Id: I0c86dc77f1bc53c283e990be419c2715edf4e1c0
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
[stepanm@codeaurora.org: resolve Kconfig conflicts]
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
.../devicetree/bindings/input/gen_vkeys.txt
drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/Makefile
drivers/input/touchscreen/gen_vkeys.c
include/linux/input/gen_vkeys.h
5 files changed, 278 insertions(+)
Change-Id: Ie0e14d201a42632af57ff23dc85cec8881125e5a
Signed-off-by: Alex Sarraf <asarraf@codeaurora.org>
During device resume, the touch resume function is called after
display resume. Touch resume function will take about >200ms.
Defer the touch resume function to a workqueue to reduce the total
device resume time. An optional DT property is added to enable this
on targets that need this feature.
Change-Id: Ia9b055144c5a7f29f0f0d57428cccbe15a7d7a87
Signed-off-by: zhaoyuan <yzhao@codeaurora.org>
This is the reference driver source code for synaptics touch driver,
the version is 2.6.
All the new files are copied from the git commit:
7b6b9d126aca1f371e8abf3ae56d7a5a4e538f13
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_active_pen.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_active_pen.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_core.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_core.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_core.h
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_core.h;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_fw_update.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_fw_update.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_gesture.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_gesture.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_i2c.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_i2c.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_proximity.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_proximity.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_rmi_dev.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_rmi_dev.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_rmi_hid_i2c.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_rmi_hid_i2c.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_spi.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_spi.c;
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_test_reporting.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_test_reporting.c
drivers/input/touchscreen/synaptics_dsx_2.6/synaptics_dsx_video.c
is copied from
kernel/drivers/input/touchscreen/synaptics_dsx/synaptics_dsx_video.c
include/linux/input/synaptics_dsx_v2_6.h
is copied from
kernel/include/linux/input/synaptics_dsx.h
Change-Id: Ifda2c38ca5b4a82c3363d8c59ae9da3839568e82
Signed-off-by: Mao Li <maol@codeaurora.org>
Squash and apply the following touchscreen changes taken from the msm-3.14
kernel branch as of msm-3.14 commit 8139d0b
(ARM: dts: msm: Set flag to manage clks during suspend for msm8996)
421c2f3 input: touchscreen: atmel_maxtouch_ts: delay init call
48e0a07 input: atmel_maxtouch_ts: recover from bootloader
b3ebb61 input: atmel_maxtouch_ts: add support for force cfg update
8467fe3 input: atmel_maxtouch_ts: fix firmware update routines
c83ee59 input: atmel: Secure Touch support
1c7d5e2 input: atmel_maxtouch_ts: fix power up sequence
d4c1ffc input: atmel_maxtouch_ts: add support to ignore CRC
f402790 input: atmel_maxtouch_ts: add support for standard features
9374cef input: atmel_maxtouch_ts: use proper data types
0fbe83e input: atmel_maxtouch_ts: add regulator error conditions
e22d100 input: atmel_maxtouch_ts: add gpio support
63d4b74 input: atmel_maxtouch_ts: add device tree support
575c2fc input: atmel_maxtouch_ts: enable compilation on 3.10 kenrel
Signed-off-by: Alex Sarraf <asarraf@codeaurora.org>
Update the firmware based on strict config ID versioning, rather than
the entire config ID as a 4 byte number. This will also protect
against config ID major number mismatches and packrat id mismatches.
This is a propagated patch from 3.10 kernel.
commit - 458cbab5c53d5141a66590441f9567d67d580c6f,
input: synaptics_dsx_fw_update: update fw based on config id
Change-Id: I1097585d3bd8b6ab753676dc56f268c7ce52680d
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Add support for reading configuration ID from the touch controller
during probe and print it. This is required to identify if touch
controller is programmed with correct touch firmware or not.
Change-Id: I155f0392ae67e5f9b184b9cef2a7bbb7666be30d
Signed-off-by: Sudhakar Manapati <smanap@codeaurora.org>
Signed-off-by: Himanshu Aggarwal <haggarwa@codeaurora.org>
Move kernel data structures to driver and keep the
data structures shared between kernel and user space
in the header file. Move the header to uapi to make
it accesible to user space.
Fix checkpatch errors to replace deprecated functions
and hardcoded error return values.
Change-Id: Ic3312c11ddda9f02da9807a6243206d582281995
Signed-off-by: Jing Lin <jinglin@codeaurora.org>
We do not have any users of platform data in the tree and all newer
platforms are either DT or ACPI, so let's drop handling of platform data.
Tested-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current/old gpio framework used doesn't properly listen to
ACTIVE_LOW and ACTIVE_HIGH flags. The newer gpio framework takes into
account these flags when setting gpio values.
Since the values being output were based on voltage and not logic they
change to reflect this difference. Also use gpiod_set_value_cansleep since
wake and reset pins can be provided by bus based io expanders.
Switch from msleep(5) to udelay_range(5000,6000) to avoid check patch
warning.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's move driver's platform data definitions from include/linux/input/
into include/linux/platform_data/ so that it stays with the rest of
platform data definitions.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's switch form OF to device properties so that common parsing code could
work not only on device tree but also on ACPI-based platforms.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When applying touchscreen parameters specified in device tree let's make
sure we keep whatever setup was done by the driver and not reset the
missing values to zero.
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some devices are not fast enough to differentiate between a fast-moving
contact and a new contact. This problem cannot be fully resolved because
information is truly missing, but it is possible to safe-guard against
obvious mistakes by restricting movement with a maximum displacement.
The new problem formulation for dmax > 0 cannot benefit from the speedup
for positive definite matrices, but since the convergence is faster, the
result is about the same. For a handful of contacts, the latency difference
is truly negligible.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some semi-mt drivers use the slots in a manual way, but may still
want to call parts of the frame synchronization logic. This patch
makes input_mt_drop_unused callable from those drivers.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some variants of the Pixcir touch controller support up to 5 simultaneous
fingers and hardware tracking IDs. Prepare the driver for that.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add common DT binding documentation for touchscreen devices and
implement input_parse_touchscreen_of_params, which parses the common
properties and configures the input device accordingly.
The method currently does not interpret the axis inversion properties,
since there is no matching flag in the generic linux input device.
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Get rid of the attb_read_val() platform hook. Instead, read the ATTB gpio
directly from the driver.
Fail if valid ATTB gpio is not provided by patform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce helper functions to configure power and interrupt registers.
Default to IDLE mode on probe as device supports auto wakeup to ACVIE mode
on detecting finger touch.
Configure interrupt mode and polarity on start up. Power down on device
closure or module removal.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
But we also have:
- Support for the TPS659038 PMIC from the palmas driver.
- Intel's Coleto Creek and Avoton SoCs support from the lpc_ich driver.
- RTL8411B support from the rtsx driver.
- More DT support for the Arizona, max8998, twl4030-power and the
ti_am335x_tsadc drivers.
- The SSBI driver move under MFD.
- A conversion to the devm_* API for most of the MFD drivers.
- The twl4030-power got split from twl-core into its own module.
- A major ti_am335x_adc cleanup, leading to a proper DT support.
- Our regular arizona and wm* updates and cleanups from the Wolfson
folks.
- A better error handling and initialization, and a regulator subdevice
addition for the 88pm80x driver.
- A bulk platform_set_drvdata() call removal that's no longer need since
commit 0998d063.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=RqMp
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next
Pull MFD update from Samuel Ortiz:
"For the 3.11 merge we only have one new MFD driver for the Kontron
PLD.
But we also have:
- Support for the TPS659038 PMIC from the palmas driver.
- Intel's Coleto Creek and Avoton SoCs support from the lpc_ich
driver.
- RTL8411B support from the rtsx driver.
- More DT support for the Arizona, max8998, twl4030-power and the
ti_am335x_tsadc drivers.
- The SSBI driver move under MFD.
- A conversion to the devm_* API for most of the MFD drivers.
- The twl4030-power got split from twl-core into its own module.
- A major ti_am335x_adc cleanup, leading to a proper DT support.
- Our regular arizona and wm* updates and cleanups from the Wolfson
folks.
- A better error handling and initialization, and a regulator
subdevice addition for the 88pm80x driver.
- A bulk platform_set_drvdata() call removal that's no longer need
since commit 0998d06310 ("device-core: Ensure drvdata = NULL when
no driver is bound")
* tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits)
mfd: sec: Provide max_register to regmap
mfd: wm8994: Remove duplicate check for active JACKDET
MAINTAINERS: Add include directory to MFD file patterns
mfd: sec: Remove fields not used since regmap conversion
watchdog: Kontron PLD watchdog timer driver
mfd: max8998: Add support for Device Tree
regulator: max8998: Use arrays for specifying voltages in platform data
mfd: max8998: Add irq domain support
regulator: palmas: Add TPS659038 support
mfd: Kontron PLD mfd driver
mfd: palmas: Add TPS659038 PMIC support
mfd: palmas: Add SMPS10_BOOST feature
mfd: palmas: Check if irq is valid
mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs
mfd: twl-core: Change TWL6025 references to TWL6032
mfd: davinci_voicecodec: Fix build breakage
mfd: vexpress: Make the driver optional for arm and arm64
mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache()
mfd: davinci_voicecodec: Convert to use devm_* APIs
mfd: twl4030-power: Fix relocking on error
...
Although defined in platform data, vref is not used anywhere.
Also remove model, irq, and clear_penirq as they are not used either.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The two header files removed here are unused and have no users as this
platform was never used with platform devices.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
The current driver expected touchscreen input
wires(XP,XN,YP,YN) to be connected in a particular order.
Making changes to accept this as platform data.
Sebastian reworked the original patch and removed a lot of the not
required pieces.
Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- The ChromeOS embedded controller which provides keyboard, battery and power
management services. This controller is accessible through i2c or SPI.
- Silicon Laboratories 476x controller, providing access to their FM chipset
and their audio codec.
- Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader.
- Nokia's Tahvo power button and watchdog device. This device is very similar
to Retu and is thus supported by the same code base.
- STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by
the stmpe driver.
- ST-Ericsson AB8540 and AB8505 power management and voltage converter
controllers through the existing ab8500 code.
Some other drivers got cleaned up or improved. In particular:
- The Linaro/STE guys got the ab8500 driver in sync with their internal code
through a series of optimizations, fixes and improvements.
- The AS3711 and OMAP USB drivers now have DT support.
- The arizona clock and interrupt handling code got improved.
- The wm5102 register patch and boot mechanism also got improved.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRhttxAAoJEIqAPN1PVmxKl6QP/ilyz2OnuZSJKAT+N3tt0EpR
6hFk0H6uSiHJ5aNyA22WGJq97R3jW9eGK9uD4AKCQ05l9UF/c5+YeXtmGHtxDLCb
jBrErfB6GmEn1H2TzVK+Rp1WPAB/yoYHJosgGNCwohvuffhMiogSVHlI09EY4mQh
2Eo0RTN1UXKXSOZN+E7hb+GbIFzU8eOlEFdc2jh4qtfsvMDANbEByrZM6s0QFB31
LPn03uBL0+iwE8KW2144LKsfzeOos4JWbumyG9Lh6BugUSy1e/Zvv7aWNVeMvY8C
0+ZUk0bzRm9g7e3X4iYLPSboZt7J6DLaBlWXnUaOsJb+YRkUGh094ySdKojP3EiK
8SWSfH4EDwIANKC4zyXMcyny8OewySyrTTd0BTlbgHFyDmvmHk213crsCcilHzRb
3wrX0ETrk96Dkla4/e7IAyME+AbrglStHVGGf2hexlPm2nZdLsE8lfyo9yqjPqzy
w49y7mpTA5PVE63szB1tI/58W2snZtXAEdQGjZmDQp29vDZaeR1t3W/IhKNG30JN
SZGiX3H/6YS4MDZ48N709H83hM4V93XrHKsN59NjQe8NZ7AnSIfns9IgMciGBv7r
aBE+Uwm9htK270Hvl5q8qDDnKaVGYOFlCq9qaeZ2k8NPyyRlQCRpJYjtSplYAnGr
iLI0JdM32u3qdf5IT+Cw
=Wq20
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next
Pull MFD update from Samuel Ortiz:
"For 3.10 we have a few new MFD drivers for:
- The ChromeOS embedded controller which provides keyboard, battery
and power management services. This controller is accessible
through i2c or SPI.
- Silicon Laboratories 476x controller, providing access to their FM
chipset and their audio codec.
- Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
reader.
- Nokia's Tahvo power button and watchdog device. This device is
very similar to Retu and is thus supported by the same code base.
- STMicroelectronics STMPE1801, a keyboard and GPIO controller
supported by the stmpe driver.
- ST-Ericsson AB8540 and AB8505 power management and voltage
converter controllers through the existing ab8500 code.
Some other drivers got cleaned up or improved. In particular:
- The Linaro/STE guys got the ab8500 driver in sync with their
internal code through a series of optimizations, fixes and
improvements.
- The AS3711 and OMAP USB drivers now have DT support.
- The arizona clock and interrupt handling code got improved.
- The wm5102 register patch and boot mechanism also got improved."
* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
mfd: si476x: Don't use 0bNNN
mfd: vexpress: Handle pending config transactions
mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
mfd: si476x: Fix i2c warning
mfd: si476x: Add header files and Kbuild plumbing
mfd: si476x: Add chip properties handling code
mfd: si476x: Add the bulk of the core driver
mfd: si476x: Add commands abstraction layer
mfd: rtsx: Support RTS5249
mfd: retu: Add Tahvo support
mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
mfd: wm8994: Add some OF properties
mfd: wm8994: Add device ID data to WM8994 OF device IDs
input: Export matrix_keypad_parse_of_params()
mfd: tps65090: Add compatible string for charger subnode
mfd: db8500-prcmu: Support platform dependant device selection
mfd: syscon: Fix warnings when printing resource_size_t
of: Add stub of_get_parent for non-OF builds
mfd: omap-usb-tll: Convert to devm_ioremap_resource()
mfd: omap-usb-host: Convert to devm_ioremap_resource()
...
Most semi-mt drivers use the slots in a manual way, but really only
need to treat the finger count manually. With this patch, a semi-mt
driver may use the input-mt core for everything else.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
