Expose all the hysteresis parameters + shutdown (emergency) +
fan_boost (fixed pwm trip point).
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For now, we only boost the fan speed to the maximum and auto-mode
when hitting the FAN_BOOST threshold and halt the computer when it
reaches the shutdown temperature. The downclock and critical thresholds
do nothing.
On nv43:50 and nva3+, temperature is polled because of the limited hardware.
I'll improve the nva3+ situation by implementing alarm management in PDAEMON
whenever I can but polling once every second shouldn't be such a problem.
v2 (Ben Skeggs):
- rebased
v3: fixed false-detections and threshold reprogrammation handling on nv50:nvc0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
We are going to use PTHERM's IRQs for thermal monitoring but we need to route
them first.
On nv31-50, PBUS's IRQ line is shared with GPIOs IRQs.
It seems like nv10-31 GPIO interruptions aren't well handled. I kept the
original behaviour but it is wrong and may lead to an IRQ storm.
Since we enable all PBUS IRQs, we need a way to avoid being stormed if we
don't handle them. The solution I used was to mask the IRQs that have not been
handled. This will also print one message in the logs to let us know.
v2: drop the shared intr handler because of was racy
v3: style fixes
v4: drop a useless construct in the chipset-dependent INTR
v5: add BUS to the disable mask
v6 (Ben Skeggs):
- general tidy to match the rest of the driver's style
- nva3->nvc0, nva3 can be serviced just fine with nv50.c, rnndb even notes
that the THERM_ALARM bit got left in the hw until fermi anyway.. so, it's
not going to conflict
- removed the peephole and user stuff, for the moment.. will handle them
later if we find a good reason to actually care..
- limited INTR_EN to just what we can handle for now, mostly to prevent
spam of unknown status bits (seen on at least nv4x)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2: improved design but drops safety monitoring (to be in a later patch)
v3: fix locking and mode management
v4: gently fallback to the no-control mode when temperature cannot be got
and use kernel-provided min/max macros
v5 (Ben Skeggs):
- rebased on my previous patches
v6: fix hysterisis management in trip-based auto fan management
This commit also forbids access to fan management to nvc0+ chipsets as
fan management is already taken care of my PDAEMON's default fw.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2 (Ben Skeggs):
- split from larger patch
- fixed to not require alarm resched patch
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
v2: change percent from int to atomic_t
v3: random fixes
v4 (Ben Skeggs):
- adapted for split-out fan-control "protocol" structure
- removed need for timer resched
- support for forcing 'toggle' control on PWM boards
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Mostly to allow for the possibility of testing 'toggle' fan control easily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
This info will be used by two more implementations in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo:
"This is part of on-going cleanups to remove / minimize usages of
workqueue interfaces which are deprecated and/or misleading.
This round drops a number of usages of [delayed_]work_pending(), which
are dangerous as they lack any form of synchronization and thus often
lead to buggy / unnecessary code. There are a couple legitimate use
cases in kernel. Hopefully, they can be converted and
[delayed_]work_pending() can be removed completely. Even if not,
removing most of misuses should make it more difficult to find
examples of misuses and thus slow down growth of them.
These changes are independent from other workqueue changes."
* 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
wimax/i2400m: fix i2400m->wake_tx_skb handling
kprobes: fix wait_for_kprobe_optimizer()
ipw2x00: simplify scan_event handling
video/exynos: don't use [delayed_]work_pending()
tty/max3100: don't use [delayed_]work_pending()
x86/mce: don't use [delayed_]work_pending()
rfkill: don't use [delayed_]work_pending()
wl1251: don't use [delayed_]work_pending()
thinkpad_acpi: don't use [delayed_]work_pending()
mwifiex: don't use [delayed_]work_pending()
sja1000: don't use [delayed_]work_pending()
Pull x86 UV3 support update from Ingo Molnar:
"Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming
third major iteration and upscaling of the SGI UV supercomputing
platform."
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3
x86, uv, uv3: Check current gru hub support for SGI UV3
x86, uv, uv3: Update Time Support for SGI UV3
x86, uv, uv3: Update x2apic Support for SGI UV3
x86, uv, uv3: Update Hub Info for SGI UV3
x86, uv, uv3: Update ACPI Check to include SGI UV3
x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)
Pull x86 platform changes from Ingo Molnar:
- Support for the Technologic Systems TS-5500 platform, by Vivien
Didelot
- Improved NUMA support on AMD systems:
Add support for federated systems where multiple memory controllers
can exist and see each other over multiple PCI domains. This
basically means that AMD node ids can be more than 8 now and the code
handling this is taught to incorporate PCI domain into those IDs.
- Support for the Goldfish virtual Android emulator, by Jun Nakajima,
Intel, Google, et al.
- Misc fixlets.
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Add TS-5500 platform support
x86/srat: Simplify memory affinity init error handling
x86/apb/timer: Remove unnecessary "if"
goldfish: platform device for x86
amd64_edac: Fix type usage in NB IDs and memory ranges
amd64_edac: Fix PCI function lookup
x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
x86, AMD, NB: Add multi-domain support
Pull x86/hyperv changes from Ingo Molnar:
"The biggest change is support for Windows 8's improved hypervisor
interrupt model on the Linux Hyper-V guest subsystem code side.
Smallish fixes otherwise."
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, hyperv: HYPERV depends on X86_LOCAL_APIC
X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts
X86: Add a check to catch Xen emulation of Hyper-V
x86: Hyper-V: register clocksource only if its advertised
Pull x86/debug changes from Ingo Molnar:
"Two init annotations and a built-in memtest speedup"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/memtest: Shorten time for tests
x86: Convert a few mistaken __cpuinit annotations to __init
x86/EFI: Properly init-annotate BGRT code
John W. Linville says:
====================
One last batch of stragglers intended for 3.9...
For the iwlwifi pull, Johannes says:
"I hadn't expected to ask you to pull iwlwifi-next again, but I have a
number of fixes most of which I'd also send in after rc1, so here it is.
The first commit is a merge error between mac80211-next and
iwlwifi-next; in addition I have fixes for P2P scanning and MVM driver
MAC (virtual interface) management from Ilan, a CT-kill (critical
temperature) fix from Eytan, and myself fixed three different little but
annoying bugs in the MVM driver.
The only ones I might not send for -rc1 are Emmanuel's debug patch, but
OTOH it should help greatly if there are any issues, and my own time
event debugging patch that I used to find the race condition but we
decided to keep it for the future."
For the mac80211 pull, Johannes says:
"Like iwlwifi-next, this would almost be suitable for rc1.
I have a fix for station management on non-TDLS drivers, a CAB queue
crash fix for mesh, a fix for an annoying (but harmless) warning, a
tracing fix and a documentation fix. Other than that, only a few mesh
cleanups."
Along with that is a fix for memory corruption in rtlwifi, an
orinoco_usb fix to avoid allocating a DMA buffer on the stack, an a
hostap fix to return -ENOMEM instead of -1 after a memory allocation
failure. The remaining bits implement 802.11ac support for the mwifiex
driver -- I think that is still worth getting into 3.9.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 68c3316311 (v4 GRE: Add TCP segmentation offload for GRE)
introduced a bug in error path.
dst is attached to skb, so will be released when skb is freed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 cleanup patches from Ingo Molnar:
"Misc smaller cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: ptrace.c only needs export.h and not the full module.h
x86, apb_timer: remove unused variable percpu_timer
um: don't compare a pointer to 0
arch/x86/platform/uv: use ARRAY_SIZE where possible
Pull two x86 kernel build changes from Ingo Molnar:
"The first change modifies how 'make oldconfig' works on cross-bitness
situations on x86. It was felt the new behavior of preserving the
bitness of the .config is more logical. This is a leftover of the
merge.
The second change eliminates a Perl warning. (There's another, more
complete fix resulting of this warning fix, which second fix in flight
to you via the kbuild tree, which will remove the timeconst.pl script
altogether.)"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timeconst.pl: Eliminate Perl warning
x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
Pull x86 bootup changes from Ingo Molnar:
"Deal with bootloaders which fail to initialize unknown fields in
boot_params to zero, by sanitizing boot params passed in.
This unbreaks versions of kexec-utils. Other bootloaders do not
appear to show sensitivity to this change, but it's a possibility for
breakage nevertheless."
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, boot: Sanitize boot_params if not zeroed on creation
Pull x86/asm changes from Ingo Molnar:
"The biggest change (by line count) is the unification of the XOR code
and then the introduction of an additional SSE based XOR assembly
method.
The other bigger change is the head_32.S rework/cleanup by Borislav
Petkov.
Last but not least there's the usual laundry list of small but
dangerous (and hopefully perfectly tested) changes to subtle low level
x86 code, plus cleanups."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, head_32: Give the 6 label a real name
x86, head_32: Remove second CPUID detection from default_entry
x86: Detect CPUID support early at boot
x86, head_32: Remove i386 pieces
x86: Require MOVBE feature in cpuid when we use it
x86: Enable ARCH_USE_BUILTIN_BSWAP
x86/xor: Add alternative SSE implementation only prefetching once per 64-byte line
x86/xor: Unify SSE-base xor-block routines
x86: Fix a typo
x86/mm: Fix the argument passed to sync_global_pgds()
x86/mm: Convert update_mmu_cache() and update_mmu_cache_pmd() to functions
ix86: Tighten asmlinkage_protect() constraints
Pull x86/apic changes from Ingo Molnar:
"Main changes:
- Multiple MSI support added to the APIC, PCI and AHCI code - acked
by all relevant maintainers, by Alexander Gordeev.
The advantage is that multiple AHCI ports can have multiple MSI
irqs assigned, and can thus spread to multiple CPUs.
[ Drivers can make use of this new facility via the
pci_enable_msi_block_auto() method ]
- x86 IOAPIC code from interrupt remapping cleanups from Joerg
Roedel:
These patches move all interrupt remapping specific checks out of
the x86 core code and replaces the respective call-sites with
function pointers. As a result the interrupt remapping code is
better abstraced from x86 core interrupt handling code.
- Various smaller improvements, fixes and cleanups."
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess
x86, kvm: Fix intialization warnings in kvm.c
x86, irq: Move irq_remapped out of x86 core code
x86, io_apic: Introduce eoi_ioapic_pin call-back
x86, msi: Introduce x86_msi.compose_msi_msg call-back
x86, irq: Introduce setup_remapped_irq()
x86, irq: Move irq_remapped() check into free_remapped_irq
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq()
x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
x86, irq: Add data structure to keep AMD specific irq remapping information
x86, irq: Move irq_remapping_enabled declaration to iommu code
x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin
x86, io_apic: Move irq_remapping_enabled checks out of check_timer()
x86, io_apic: Convert setup_ioapic_entry to function pointer
x86, io_apic: Introduce set_affinity function pointer
x86, msi: Use IRQ remapping specific setup_msi_irqs routine
x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging
x86, io_apic: Introduce x86_io_apic_ops.disable()
x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume
...
Pull timer changes from Ingo Molnar:
"Main changes:
- ntp: Add CONFIG_RTC_SYSTOHC: a generic RTC driver facility
complementing the existing CONFIG_RTC_HCTOSYS, which uses NTP to
keep the hardware clock updated.
- posix-timers: Fix clock_adjtime to always return timex data on
success. This is changing the ABI, but no breakage was expected
and found - caution is warranted nevertheless.
- platform persistent clock improvements/cleanups.
- clockevents: refactor timer broadcast handling to be more generic
and less duplicated with matching architecture code (mostly ARM
motivated.)
- various fixes and cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/x86/hpet: Use HPET_COUNTER to specify the hpet counter in vread_hpet()
posix-cpu-timers: Fix nanosleep task_struct leak
clockevents: Fix generic broadcast for FEAT_C3STOP
time, Fix setting of hardware clock in NTP code
hrtimer: Prevent hrtimer_enqueue_reprogram race
clockevents: Add generic timer broadcast function
clockevents: Add generic timer broadcast receiver
timekeeping: Switch HAS_PERSISTENT_CLOCK to ALWAYS_USE_PERSISTENT_CLOCK
x86/time/rtc: Don't print extended CMOS year when reading RTC
x86: Select HAS_PERSISTENT_CLOCK on x86
timekeeping: Add CONFIG_HAS_PERSISTENT_CLOCK option
rtc: Skip the suspend/resume handling if persistent clock exist
timekeeping: Add persistent_clock_exist flag
posix-timers: Fix clock_adjtime to always return timex data on success
Round the calculated scale factor in set_cyc2ns_scale()
NTP: Add a CONFIG_RTC_SYSTOHC configuration
MAINTAINERS: Update John Stultz's email
time: create __getnstimeofday for WARNless calls
Pull preparatory smp/hotplug patches from Ingo Molnar:
"Some early preparatory changes for the WIP hotplug rework by Thomas
Gleixner."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stop_machine: Use smpboot threads
stop_machine: Store task reference in a separate per cpu variable
smpboot: Allow selfparking per cpu threads
There is a loophole between Xen's current implementation of
pv-spinlocks and the scheduler. This was triggerable through
a testcase until v3.6 changed the TLB flushing code. The
problem potentially is still there just not observable in the
same way.
What could happen was (is):
1. CPU n tries to schedule task x away and goes into a slow
wait for the runq lock of CPU n-# (must be one with a lower
number).
2. CPU n-#, while processing softirqs, tries to balance domains
and goes into a slow wait for its own runq lock (for updating
some records). Since this is a spin_lock_irqsave in softirq
context, interrupts will be re-enabled for the duration of
the poll_irq hypercall used by Xen.
3. Before the runq lock of CPU n-# is unlocked, CPU n-1 receives
an interrupt (e.g. endio) and when processing the interrupt,
tries to wake up task x. But that is in schedule and still
on_cpu, so try_to_wake_up goes into a tight loop.
4. The runq lock of CPU n-# gets unlocked, but the message only
gets sent to the first waiter, which is CPU n-# and that is
busily stuck.
5. CPU n-# never returns from the nested interruption to take and
release the lock because the scheduler uses a busy wait.
And CPU n never finishes the task migration because the unlock
notification only went to CPU n-#.
To avoid this and since the unlocking code has no real sense of
which waiter is best suited to grab the lock, just send the IPI
to all of them. This causes the waiters to return from the hyper-
call (those not interrupted at least) and do active spinlocking.
BugLink: http://bugs.launchpad.net/bugs/1011792
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
ioremap can't be used to map ring pages on ARM because it uses device
memory caching attributes (MT_DEVICE*).
Introduce a Xen specific abstraction to map ring pages, called
xen_remap, that is defined as ioremap on x86 (no behavioral changes).
On ARM it explicitly calls __arm_ioremap with the right caching
attributes: MT_MEMORY.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The evtchn device has been moved to /dev/xen. Also change log level to
KERN_ERR as other xen drivers.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To avoid compile issue and it's meanigfull only under CONFIG_XEN_DOM0.
In file included from linux/arch/x86/xen/enlighten.c:47:0:
linux/include/xen/acpi.h:75:76: error: unknown type name ‘acpi_handle’
make[3]: *** [arch/x86/xen/enlighten.o] Error 1
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
[v1: Fixed spelling mistakes]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch implement real Xen ACPI cpu hotplug driver as module.
When loaded, it replaces Xen stub driver.
For booting existed cpus, the driver enumerates them.
For hotadded cpus, which added at runtime and notify OS via
device or container event, the driver is invoked to add them,
parsing cpu information, hypercalling to Xen hypervisor to add
them, and finally setting up new /sys interface for them.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
So that it could be reused by Xen CPU hotplug logic.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add Xen stub driver for CPU hotplug, early occupy to block native,
will be replaced later by real Xen processor driver module.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch implements real Xen acpi memory hotplug driver as module.
When loaded, it replaces Xen stub driver.
When an acpi memory device hotadd event occurs, it notifies OS and
invokes notification callback, adding related memory device and parsing
memory information, finally hypercall to xen hypervisor to add memory.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch create a file (xen-stub.c) for Xen stub drivers.
Xen stub drivers are used to reserve space for Xen drivers, i.e.
memory hotplug and cpu hotplug, and to block native drivers loaded,
so that real Xen drivers can be modular and loaded on demand.
This patch is specific for Xen memory hotplug (other Xen logic
can add stub drivers on their own). The xen stub driver will
occupied earlier via subsys_initcall (than native memory hotplug
driver via module_init and so blocking native). Later real Xen
memory hotplug logic will unregister the stub driver and register
itself to take effect on demand.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Allows for more fine grained error reporting. Only used by PVH and
ARM both of which are marked EXPERIMENTAL precisely because the ABI
is not yet stable
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
[v1: Rebased without PVH patches]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The PV and PVH code CPU init code share some functionality. The
PVH code ("xen/pvh: Extend vcpu_guest_context, p2m, event, and XenBus")
sets some of these up, but not all. To make it easier to read, this
patch removes the PV specific out of the generic way.
No functional change - just code movement.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v2: Fixed compile errors noticed by Fengguang Wu build system]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
