The invalidation is required in order to maintain proper semantics
under CoW conditions. In scenarios where a process clones several
threads, a thread operating on a core whose DTLB entry for a
particular hugepage has not been invalidated, will be reading from
the hugepage that belongs to the forked child process, even after
hugetlb_cow().
The thread will not see the updated page as long as the stale DTLB
entry remains cached, the thread attempts to write into the page,
the child process exits, or the thread gets migrated to a different
processor.
Signed-off-by: Anthony Iliopoulos <anthony.iliopoulos@huawei.com>
Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corp
Suggested-by: Shay Goikhman <shay.goikhman@huawei.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.16+ (!)
Add USB ID for Peak DVB-T USB.
[crope@iki.fi: fix Brian email address and indentation]
Signed-off-by: Brian Healy <healybrian@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
S5PC210 SoC doesn't support encoding NV12 raw images. Remove
relavant flag from the respective entry in the sjpeg_formats
array.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch fixes build break occurring when there is no support
for Device Tree turned on in the kernel configuration. In such
case only the driver variant for S5PC210 SoC will be available.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Prevent decompression of a JPEG 4:2:0 with odd width to
the YUV 4:2:0 compliant formats for Exynos4x12 SoCs and
adjust capture format to RGB565 in such a case. This is
required because the configuration would produce a raw
image with broken luma component.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This patch fixes jpeg sysmmu page fault on Exynos4x12 SoCs.
During encoding Exynos4x12 SoCs access wider memory area
than it results from Image_x and Image_y values written to
the JPEG_IMAGE_SIZE register. In order to avoid sysmmu page
fault apply proper output buffer size alignment.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Remove erroneous guard preventing successful execution of
g_selection callback in case the driver variant is different
from SJPEG_S5P.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Simplify the code by adding m2m_ops field to the
s5p_jpeg_variant structure which allows to avoid
"if" statement in the s5p_jpeg_probe function.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Change the driver variant check from "is not S5PC210"
to "is Exynos4" while checking whether YUV format needs
to be downgraded in order to prevent upsampling which
is not supported by Exynos4 SoCs family.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Simplify the code by adding fmt_ver_flag field
to the s5p_jpeg_variant structure which allows
to avoid "if" statement in the s5p_jpeg_find_format
function.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This formula did not take into account the required tiled alignement for
NV12MT format. As this was already computed an stored in payload array
initially, reuse that value.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Testing showed that HW produces BGR32 rather then RGB32 as exposed
in the driver. The documentation seems to state the pixels are stored
in little endian order.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
[s.nawrocki@samsung.com] replaced "BGRB888, 32 bpp" with "BGRA8888, 32 bpp"
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Depth and payload is defined per memory plane. It's better to iterate using
number of memory planes. This was not causing much issue since the rest
of the arrays involved where intialized to zero.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
If a struct contains 64-bit fields, it is aligned on 64-bit boundaries
within containing structs in 64-bit compilations. This is the case with
struct v4l2_window, which contains pointers and is embedded into struct
v4l2_format, and that one is embedded into struct v4l2_create_buffers.
Unlike some other structs, used as a part of the kernel ABI as ioctl()
arguments, that are packed, these structs aren't packed. This isn't a
problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains
a bug, that triggers in such 64-bit builds. That code wrongly assumes,
that in struct v4l2_create_buffers, struct v4l2_format immediately follows
the __u32 memory field, which in fact isn't the case. This bug wasn't
visible until now, because until recently hardly any applications used
this ioctl() and mostly embedded 32-bit only drivers implemented it. This
is changing now with addition of this ioctl() to some USB drivers, e.g.
UVC. This patch fixes the bug by copying parts of struct
v4l2_create_buffers separately.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: stable@vger.kernel.org
Commit 75e2bdad89 "ov7670: allow
configuration of image size, clock speed, and I/O method" uses a wrong
index to iterate an array. Apart from being wrong, it also uses an
unchecked value from user-space, which can cause access to unmapped
memory in the kernel, triggered by a normal desktop user with rights to
use V4L2 devices.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
If a struct contains 64-bit fields, it is aligned on 64-bit boundaries
within containing structs in 64-bit compilations. This is the case with
struct v4l2_window, which contains pointers and is embedded into struct
v4l2_format, and that one is embedded into struct v4l2_create_buffers.
Unlike some other structs, used as a part of the kernel ABI as ioctl()
arguments, that are packed, these structs aren't packed. This isn't a
problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains
a bug, that triggers in such 64-bit builds. That code wrongly assumes,
that in struct v4l2_create_buffers, struct v4l2_format immediately follows
the __u32 memory field, which in fact isn't the case. This bug wasn't
visible until now, because until recently hardly any applications used
this ioctl() and mostly embedded 32-bit only drivers implemented it. This
is changing now with addition of this ioctl() to some USB drivers, e.g.
UVC. This patch fixes the bug by copying parts of struct
v4l2_create_buffers separately.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Commit 75e2bdad89 "ov7670: allow
configuration of image size, clock speed, and I/O method" uses a wrong
index to iterate an array. Apart from being wrong, it also uses an
unchecked value from user-space, which can cause access to unmapped
memory in the kernel, triggered by a normal desktop user with rights to
use V4L2 devices.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
If the sub-device did not report any tvnorms, then disable the STD
ioctls.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
While there was already a g_tvnorms_output video op, it's counterpart for
video capture was missing. Add it.
This is necessary for generic bridge drivers like soc-camera to set the
video_device tvnorms field correctly. Otherwise ENUMSTD cannot work.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Search for Broadcom specific ibft sign "BIFT"
along with other possible values on UEFI
This patch is fix for regression introduced in
“935a9fee51c945b8942be2d7b4bae069167b4886”.
https://lkml.org/lkml/2011/12/16/353
This impacts Broadcom CNA for iSCSI Boot on UEFI platform.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.
To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Commit 10df350977 ("ASoC: Intel: Fix Audio DSP usage when IOMMU is
enabled.") caused following regression in Baytrail SST:
baytrail-pcm-audio baytrail-pcm-audio: error: DMA alloc failed
baytrail-pcm-audio baytrail-pcm-audio: error: failed to load firmware
Fix this by calling dma_coerce_mask_and_coherent() in sst_byt_init() with
the same dma_dev device what is now used in sst_fw_new() when allocating the
DMA buffer.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The input field in struct v4l2_buffer no longer exists but has been replaced
by a reserved field. Remove the field documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
V4L2_MBUS_FRAME_DESC_FL_BLOB intends to say the receiver must use 1D DMA to
receive the image, as the format does not have line offsets. This typically
includes all compressed formats.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
When the sub-device is registered, increment the use count of the sub-device
owner only if it's different from the owner of the driver for the media
device. This avoids increasing the use count by the module itself and thus
making it possible to unload it when it's not in use.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
mdev->fops->owner is actually the owner of the very same module which
implements media_device_register(), so it can't be unloaded anyway. Instead,
use THIS_MODULE through a macro as does video_register_device().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
VIDIOC_SUBDEV_[GS]_FRAME_INTERVAL IOCTLs argument structs contain the pad
field but the validity check was missing. There should be no implications
security-wise from this since no driver currently uses the pad field in the
struct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is already available from saa7134_dev.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Don't calculate this for every buffer, store it globally instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This will make the next patch a bit easier to read.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
saa7134-alsa used low-level videobuf functions to allocate and sync
DMA buffers. Replace this with saa7134-specific code. These functions
will not be available when we convert to vb2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Just white space and coding style changes to reduce the noise in the
following patches.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This solves this bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73361
The problem is that when you quit tvtime it calls STREAMOFF, but then it queues a
bunch of buffers for no good reason before closing the file descriptor.
In the past closing the fd would free the vb queue since that was part of the file
handle struct. Since that was moved to the global struct that no longer happened.
This wouldn't be a problem, but the extra QBUF calls that tvtime does meant that
the buffer list in videobuf (q->stream) contained buffers, so REQBUFS would fail
with -EBUSY.
The solution is to init the list head explicitly when releasing the file
descriptor and to not free the video resource when calling streamoff.
The real fix will hopefully go into kernel 3.16 when the vb2 conversion is
merged. Basically the saa7134 driver with the old videobuf is so full of holes it
ain't funny anymore, so consider this a band-aid for kernels 3.14 and 15.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v3.14 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Setting the P state of the core to max at init time is a hold over
from early implementation of intel_pstate where intel_pstate disabled
cpufreq and loaded VERY early in the boot sequence. This was to
ensure that intel_pstate did not affect boot time. This in not needed
now that intel_pstate is a cpufreq driver.
Removing this covers the case where a CPU has gone through a manual
CPU offline/online cycle and the P state is set to MAX on init and the
CPU immediately goes idle. Due to HW coordination the P state request
on the idle CPU will drag all cores to MAX P state until the load is
reevaluated when to core goes non-idle.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While updating cgroup_freezer locking, 68fafb77d827 ("cgroup_freezer:
replace freezer->lock with freezer_mutex") introduced a bug in
update_if_frozen() where it returns with rcu_read_lock() held. Fix it
by adding rcu_read_unlock() before returning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
After 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it
to css_set_rwsem"), css task iterators requires sleepable context as
it may block on css_set_rwsem. I missed that cgroup_freezer was
iterating tasks under IRQ-safe spinlock freezer->lock. This leads to
errors like the following on freezer state reads and transitions.
BUG: sleeping function called from invalid context at /work
/os/work/kernel/locking/rwsem.c:20
in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash
5 locks held by bash/462:
#0: (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0
#1: (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170
#2: (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170
#3: (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0
#4: (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0
Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460
CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ #10
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000
ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740
0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246
Call Trace:
[<ffffffff81cf8c96>] dump_stack+0x4e/0x7a
[<ffffffff810cf4f2>] __might_sleep+0x162/0x260
[<ffffffff81d05974>] down_read+0x24/0x60
[<ffffffff81133e87>] css_task_iter_start+0x27/0x70
[<ffffffff8113584d>] freezer_apply_state+0x5d/0x130
[<ffffffff81135a16>] freezer_write+0xf6/0x1e0
[<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230
[<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170
[<ffffffff811f0756>] vfs_write+0xb6/0x1c0
[<ffffffff811f121d>] SyS_write+0x4d/0xc0
[<ffffffff81d08292>] system_call_fastpath+0x16/0x1b
freezer->lock used to be used in hot paths but that time is long gone
and there's no reason for the lock to be IRQ-safe spinlock or even
per-cgroup. In fact, given the fact that a cgroup may contain large
number of tasks, it's not a good idea to iterate over them while
holding IRQ-safe spinlock.
Let's simplify locking by replacing per-cgroup freezer->lock with
global freezer_mutex. This also makes the comments explaining the
intricacies of policy inheritance and the locking around it as the
states are protected by a common mutex.
The conversion is mostly straight-forward. The followings are worth
mentioning.
* freezer_css_online() no longer needs double locking.
* freezer_attach() now performs propagation simply while holding
freezer_mutex. update_if_frozen() race no longer exists and the
comment is removed.
* freezer_fork() now tests whether the task is in root cgroup using
the new task_css_is_root() without doing rcu_read_lock/unlock(). If
not, it grabs freezer_mutex and performs the operation.
* freezer_read() and freezer_change_state() grab freezer_mutex across
the whole operation and pin the css while iterating so that each
descendant processing happens in sleepable context.
Fixes: 96d365e0b8 ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.
Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.
v2: cgroup no longer supports modular controllers. No need to export
init_css_set. Pointed out by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report. This patch reverts Linux to the original behavior.
Fixes: 0249ed2444 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
