The patch sets the stream for user PD based on
its active mdlog session. The patch updates proper
peripheral information required for hdlc encoding.
CRs-Fixed: 2063972
Change-Id: Iedfad5161b1145245883282b29811a82343e79ba
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Remove compilation of the module as built-in
by default.
Change-Id: Iadb70814c02df68b75ae4efae66637beaf520b9e
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Add mdio_bus_id and phy_addr to access phy device
instead of scanning mdio bus. It will reduce time
cost during ethernet driver loading.
Change-Id: Ifb1574d4a68944a087dcafb12bc79098bc3156e4
Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org>
Currently, there is a possibility of using already freed
memory device session members during mask updates. The
patch fixes the issue by adding proper protection.
CRs-Fixed: 2074264
Change-Id: Iff2009a498506ffe574655badfe0a0f9f0dece9a
Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Disable CGROUP_DEBUG config for msm8998 in perf defconfig.
Change-Id: Ib321201ea0761548fb26db42d59cad07a08eca85
Signed-off-by: Mohammed Khajapasha <mkhaja@codeaurora.org>
WLED module does not have the SC protection feature on PM660l.
Hence remove the SC properties from the WLED device tree node.
CRs-Fixed: 2071302
Change-Id: I45ea0b7581780988b51ab3665c08d8a67a3ce4d3
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
We observed an interrupt storm on that interrupt
even after the usb path is suspended.
So keep this interrupt disabled as long as the usb
path is suspended.
Note that since the current limit votes can come in
prior to interrupt registration, rerun the election
on the votable after interrupts are registered.
Change-Id: Ib43b071b7b0decf8e50d27d585bea04b727f9475
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
As per PCIe spec, PCIe link needs to be set to D3hot state before
entering D3cold state.
Change-Id: I68defc4cf29fe88262e92fe8fb934948ad13aef4
CRs-fixed: 2059087
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Currently the buck frequency is set to 700kHz only when the smb138x is
in master mode. The buck frequency needs to be 700kHz in both master and
slave mode to prevent ADC errors. Do it.
Change-Id: Ib2cea9b38b6b23f9f229ee85c2bde5a5fd6220fd
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
WLAN QCA6290 chipset specific changes are featurized under
this config entry.
Change-Id: I9283ea5dcac702018b2483cdcd4aea254e96c51a
CRs-fixed: 2071634
Signed-off-by: Yue Ma <yuem@codeaurora.org>
Start offset is not considered in cache operation logic,
due to which bytes at the end of payload might be stale.
Add logic to add offset to cache operation length
from start of buffer, to ensure correct cache operation.
Change-Id: I5fed2fe78f803d3d4d3283ab293ad86238dbc620
Signed-off-by: Surajit Podder <spodder@codeaurora.org>
On consecutive writes in bulk write API, ensure delay
is provided for atleast 100us between each soundwire
master write for WR_DONE status update and reflect
current register value. Also ensure delay in soundwire
master read is present after register address update
and before register value read.
CRs-Fixed: 2035787
Change-Id: I8399c5ca32328abdd4e90b46d6f8d6a6c0225905
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Pointer from userspace is de-referenced before the command is checked.
This might cause a crash if the command being sent is not a valid command.
Hence changing the de-reference such that the pointer is accessed after
checking if a valid command is sent from the userspace.
Change-Id: I8db9382dd184f1564176ab45355954dcde8a3ab3
Signed-off-by: Samyukta Mogily <smogily@codeaurora.org>
