Update total number of temperature sensors (TSENS)
supported on controller 0. Remove support to read from
TSENS sensor 5 and 6.
Change-Id: I63e2a0a29f6bbe787fa10170c28569cf692d2807
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
tsens_get_hw_id_mapping() API is used by thermal
client to obtain the logical ID or HW ID mapping
for the available temperature sensors (TSENS)
controller with sensor ID details. Clients
currently query the driver on a per sensor basis.
The API update allows the clients to get the sensor
ID information at once for the available number
of sensors.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Change-Id: Ibae066276b099ffb78c72a890a689f83e4df56a9
The wakeup variable keeps track of the 2 edge interrupts needed to detect
wakeup from deep sleep, when the second edge interrupt is detected the
wake byte is injected into the tty buffer.
On some boards due to noisy GPIO pins an interrupt is detected as soon as
the wakeup irq is enabled and before the variable is reset leading to
bogus wakeup bytes being injected into the serial buffer.
To protect against this, make sure the wakeup interrupt is enabled after
all the state variables are reset to protect against spurious wakeups.
Change-Id: I8002a67d8d9cb41709049ff34f35717f3dd0acd0
Acked-by: Yijiang Yuan <yijiangy@qti.qualcomm.com>
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Add support for audio over MI2S and AUX PCM interfaces
so that applications have flexibility to select MI2S/AUX
PCM interfaces in addition to Slimbus.
CRs-Fixed: 1047362 1047365
Change-Id: I48e6680b026391d8e77bbdcba4fb59ed90b13581
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
Fix possible NULL pointer dereference issue as strrchr() API can
return NULL if there is no port_num found as part of passed string.
Change-Id: I410e58361282f175e46b68cbfaf4824e386454f8
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Device state is updated incorrectly during codec probe when
the wsa881x soundwire slave device is in suspend state, resulting
in register read/write failures. Update the device state during
device probe instead of codec probe.
Change-Id: I46afe2a08495c2ed06806b0568b1c44a6ffd947f
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Currently a device without a battery will shutdown soon after boot since
the SOC will be 0. Add a DT property called "qcom,batteryless-platform"
which indicates that the device does not have a battery. If this
property is set then charging will be disabled, and all of the necessary
battery parameters will be faked to ensure normal operation.
Change-Id: I6943b7f5565ad95eddb9e3d30de5efbc47106e3d
Signed-off-by: Nicholas Troast <ntroast@codeaurora.org>
The RBBM_ALWAYS_COUNT countable does not function properly
when top level clock gating is enabled. Return -EINVAL
when user requests this perfcounter.
CRs-Fixed: 1038778
Change-Id: I48d560ab2caa6ea467ac56bf0d323937a475cdde
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
Initialize the return value in the glink tx scheduler
function.
CRs-Fixed: 1067981
Change-Id: I3f78196927501f582c36d5815096581185d797b4
Signed-off-by: Dhoat Harpal <hdhoat@codeaurora.org>
Add carve-outs, firmware regions and other cma areas as part of initial
memory map configuration for msmtriton.
Change-Id: If3f17a913aac8fb5959c919ae28973544e33444a
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Use div64_s64() instead of direct division required for 32-bit kernel
compilation.
CRs-Fixed: 1070141
Change-Id: I9f58a411c2a923c07fd27ab9dc5ac244e4b13a44
Signed-off-by: ansharma <ansharma@codeaurora.org>
Update regulator name and phandle for msmfalcon.
While at it, add buck-boost regulator.
CRs-Fixed: 1070486
Change-Id: Ia3c1beed20590e4135d58ad235ff861d47db5882
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Update the initial memory map details for the carveout memory regions
for msmfalcon.
Change-Id: I81b7992aa1117590400050c2da7dc7c9e3903572
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
During suspend, where there isn't a explicit timer requirement, suspend
driver adds a ~0ULL value to current timer value and passes it on to RPM as
the wakeup timer. However, RPM doesn't handle overflow of timer wakeups,
which could indicate that the master is requesting a wakeup in the past
and causes a crash.
Adding 1 to current wakeup times, sets the wakeup time to 0 for suspend
usecases. MPM maps a 0 wakeup time to ~0ULL which would be handled
correctly on the RPM side.
Change-Id: Ida24c83eb2f1ae94ad7168b6065db69da35c3ec9
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Girish S Ghongdemath <girishsg@codeaurora.org>
Since GEF was introduced, effect control function is moved to user land
and driver related logics are not needed anymore. Adding a config to
limit audiosphere related functions to legacy platforms only.
CRs-Fixed: 1067706
Change-Id: I1d860a1ecf930e09988fa116add8518bfb3abc25
Signed-off-by: Weiyin Jiang <wjiang@codeaurora.org>
Convert Goodix driver to dev_pm_ops.
Add return type and parameters for suspend/resume for
Goodix driver.
Change-Id: I5243d9ab801f6964e675ad37c2161beda3586dfe
Signed-off-by: Shantanu Jain <shjain@codeaurora.org>
gic_poke_irq creates lots of RTB logging. Update the API to call
the no log version of write_relax.
CRs-Fixed: 1070282
Change-Id: I6924bc24fafb1685a2a157656281e7d36223257e
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Commit 573979dee2 ("perf: Add support for exclude_idle attribute")
does a register_idle_notifier call so that exclude_idle events
are updated when a CPU goes idle. This commit fixes a bug which
causes unregister_idle_notifier to be erroneously called.
Change-Id: I13dbd369c0ce137e884c156360c514df92746e39
Signed-off-by: Patrick Fay <pfay@codeaurora.org>
This reverts 'commit 0754aea0fd ("ARM: dts: msm: configure CX voltage
levels from MDSS for msmcobalt")'.
Correctly indicating to the RPM driver when to turn off the MMSS
GDSC. 'commit f1b5dbb743b3 ("msm: mdss: control when MMSS
GDSC gets turned off")' is the correct fix for this issue.
Crs-Fixed: 1068650
Change-Id: I7eae1fbad8467e36c1a216d1ea719c6e3ed9e586
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
RPM has no way to know if they have to disable the MMSS gdsc
during idle power collapse or if its a full suspend.
Setting up the RPM RAM msg to 1 going into idle power collapse
and setting it to 0 while going to full suspend.
All these states mentioned are from a display point of
view.
Crs-Fixed: 1068650
Change-Id: I0ed47e89f6a4dd332ff28e8a1203ae3bfe44e7fa
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Update the FMAXes for camera clocks on MSMCOBALT v2 to match
the SW frequency plan.
CRs-Fixed: 1070162
Change-Id: I72af0d68ce2f7b57300966206b5861916620a79c
Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
