The fsl_ssi driver only checks for the ac97 mode property, so remove the unused
ones.
Suggested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the ssm2602/ssm2603/ssm2604 codec driver to be
instantiated from the device tree.
Also, add Kconfig prompts to allow manual selection of both the
I2C and SPI configuration versions of the driver.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
This adds regulator support to enable/disable the LCD voltage, using
'lcd-supply' as regulator name.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch adds a function to get the MACIDs from the am33xx SoC
control module registers which hold unique vendor MACIDs. This is only
used if of_get_mac_address() fails to get a valid mac address.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mac-address is an optional property. If no mac-address is set, a random
mac-address will be generated.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
For function and group configuration nodes, use "function"
"groups" string pairs, not "pins" where there should be
"groups".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds the Device tree bindings for the
Ethernet over SPI protocol driver of the Qualcomm
QCA7000 HomePlug GreenPHY.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the pwm regulator
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Here's our last set of fixes for 3.17. Most of these are for TI platforms,
fixing some noisy Kconfig issues, runtime clock and power issues on
several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a small
fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures clock
management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but nothing
stands out as risky either so it seems like the right thing to send it
up now instead of holding it to the merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=K6xV
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Here's our last set of fixes for 3.17. Most of these are for TI
platforms, fixing some noisy Kconfig issues, runtime clock and power
issues on several platforms and NAND timings on DRA7.
There are also a couple of bug fixes for i.MX, one for QCOM and a
small fix to avoid section mismatch noise on PXA.
Diffstat looks large, partially due to some tables being updated and
thus touching many lines. The qcom gsbi change also restructures
clock management a bit and thus touches a bunch of lines.
All in all, a bit more changes than we'd like at this point, but
nothing stands out as risky either so it seems like the right thing to
send it up now instead of holding it to the merge window"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
drivers/soc: qcom: do not disable the iface clock in probe
ARM: imx: fix .is_enabled() of shared gate clock
ARM: OMAP3: Fix I/O chain clock line assertion timed out error
ARM: keystone: dts: fix bindings for pcie and usb clock nodes
bus: omap_l3_noc: Fix connID for OMAP4
ARM: DT: imx53: fix lvds channel 1 port
ARM: dts: cm-t54: fix serial console power supply.
ARM: dts: dra7-evm: Fix NAND GPMC timings
ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init
ARM: OMAP: Fix Kconfig warning for omap1
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZkI9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Allwinner Clocks Additions for 3.18
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
Analog Devices SSM4567 is a boost class-D audio amplifier.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The MBUS clock on sun8i is slightly different from the old mod0 clocks.
The divider is 3 bits wider, while also needing a divider table for the
higher 4 values, which all set the same divider.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The MMC clock we thought we had until now are actually not one but three
different clocks.
The main one is unchanged, and will have three outputs:
- The clock fed into the MMC
- a sample and output clocks, to deal with when should we output/sample data
to/from the MMC bus
The phase control we had are actually controlling the two latter clocks, but
the main MMC one is unchanged.
We can adjust the phase with a 3 bits value, from 0 to 7, 0 meaning a 180 phase
shift, and the other values being the number of periods from the MMC parent
clock to outphase the clock of.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Even though the mbus clock is a regular module clock, given its nature, it
needs to be enabled all the time.
Introduce a new compatible, to differentiate it from the other module clocks.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
The added gpio-gate-clock is a basic clock that can be enabled and
disabled trough a gpio output. The DT binding document for the clock
is also added. For EPROBE_DEFER handling the registering of the clock
has to be delayed until of_clk_get() call time.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This driver registers a restart handler to set a GPIO line high/low
to reset a board based on devicetree bindings.
Signed-off-by: David Riley <davidriley@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
According to Wikipedia, Innolux started out in 2003 as InnoLux Display
Corporation and merged with Chi Mei Optoelectronics in 2006. It went by
the name of Chimei Innolux Corporation for a while and changed its name
back to Innolux Corporation in late 2012.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The stock ticker for Sitronix is just a number.
"sitronix,st1232" is already in use for the Sitronix st1232 touchscreen
controller on Atmark Techno Armadillo 800 EVA.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Add Gateworks Corporation to the list of device tree vendor prefixes.
Gateworks designs and manufactures single board computers designed for
embedded wireless and wired network applications.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The kernel supports devices with the following compatible strings
already:
energymicro,efm32-i2c
energymicro,efm32-uart
energymicro,efm32-spi
energymicro,efm32-timer
So add "energymicro" to the list of vendors.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Recently we introduced the generic device tree infrastructure for couple of DMA
bus parameter, dma-ranges and dma-coherent. Update the documentation so that
its useful for future users.
The "dma-ranges" property is intended to be used for describing the
configuration of DMA bus RAM addresses and its offset w.r.t CPU addresses.
The "dma-coherent" property is intended to be used for identifying devices
supported coherent DMA operations.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Document DT bindings used to describe the Qualcomm SPMI PMICs.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The rtc driver now supports PM8941 PMIC device, reflect this
in the binding document.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.
So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The GPBR block provides a set of battery-backed registers that can be used
to save data which need to be kept when the system is powered down and
VDD-core is maintained by an external battery.
A typical usage is the RTT block (when used as an RTC) which needs one of
those registers to save the current time.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
STMPE now supports using a GPIO as an IRQ source. Document the device
tree binding for this option.
Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add device tree bindings documentation and a header file
for rockchip's RK808 pmic.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Zhang Qing <zhangqing@rock-chips.com>
Tested-by: Heiko <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.
Signed-off-by: Inha Song <ideal.song@samsung.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This adds the device tree bindings documentation for Ricoh RN5T618.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the device tree bindings documentation for the Amlogic Meson
variant of the Synopsys DesignWare MAC.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the device tree bindings used by register bit LEDs.
Cc: devicetree@vger.kernel.org
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJUIB6OAAoJEAf03oE53VmQL+IIALNg2XPS49u2Y6VMjL3srFLt
7CUdNoGB7GJKoGrIXPSyAhJLkRlWREgRsEk/RSYqfBpyBZV4PIx9R6dIz1L+VxGU
9neXLkZGrYNzN8qJPz82+ARuCXdCF13N8ClVfXkNDhwbDnlbZgTkh4hNV118mKLt
+PF0d3w354ujieUD7D0pOcdRlny487qMNjtc/0U4P+H2sp2EtL0PpFHicn79InPT
V36PpFtUMEgbw2wQPNtlFkjQWstyZ7WJJGUbIX/2P3PASCwKsgrbmkvDvmfp5tUT
FdclJwJnxgcpni2fDvbz8Vq04i3hixl2Olm8tAvIXOI/hdVcurvZSfweJ5BrfDk=
=fMfO
-----END PGP SIGNATURE-----
Merge tag 'at91-soc2' of git://github.com/at91linux/linux-at91 into next/soc
Pull "Second SoC batch for 3.18" from Nicolas Ferre:
- introduction of the new SAMA5D4 SoC and associated Evaluation Kit
- low level soc detection and early printk code
- taking advantage of this, documentation of all AT91 SoC DT strings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-soc2' of git://github.com/at91linux/linux-at91:
ARM: at91: document Atmel SMART compatibles
ARM: at91: add sama5d4 support to sama5_defconfig
ARM: at91: dt: add device tree file for SAMA5D4ek board
ARM: at91: dt: add device tree file for SAMA5D4 SoC
ARM: at91: SAMA5D4 SoC detection code and low level routines
ARM: at91: introduce basic SAMA5D4 support
clk: at91: add a driver for the h32mx clock
start using the SRAM driver for some omaps, and update the
defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iau9
-----END PGP SIGNATURE-----
Merge tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "part 2 of omap SoC changes" from Tony Lindgren:
Few hwmod changes to support upcoming 8250 driver with DMA,
start using the SRAM driver for some omaps, and update the
defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'soc-part2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: Remove static iotable mappings for SRAM
ARM: OMAP4+: Move SRAM data to DT
ARM: AM335x: Get rid of unused sram init function
ARM: omap2plus_defconfig: Enable some display features
ARM: omap2plus_defconfig: Enable battery and reset drivers
ARM: omap2plus_defconfig: Add support for distros with systemd
ARM: omap2plus_defconfig: Add cpufreq to defconfig
ARM: omap2plus_defconfig: Shrink with savedefconfig
ARM: OMAP3: Use manual idle for UARTs because of DMA errata
ARM: OMAP2+: Add hwmod flag for HWMOD_RECONFIG_IO_CHAIN
Merge "ARM: BCM: Broadcom BCM63138 support" from Florian Fainelli:
This patchset adds very minimal support for the BCM63138 SoC which is
a xDSL SoC using a dual Cortex A9 CPU complex.
* tag 'bcm63138-v4' of http://github.com/brcm/linux:
MAINTAINERS: add entry for the Broadcom BCM63xx ARM SoCs
ARM: BCM63XX: add BCM963138DVT Reference platform DTS
ARM: BCM63XX: add BCM63138 minimal Device Tree
ARM: BCM63XX: add low-level UART debug support
ARM: BCM63XX: add basic support for the Broadcom BCM63138 DSL SoC
Conflicts:
arch/arm/Kconfig.debug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add new driver for Rockchip IO voltage domains
- update MAINTAINERS to reflect maintenance of drivers/power/avs/*
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=owv3
-----END PGP SIGNATURE-----
Merge tag 'avs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux into pm-avs
Pull AVS changes for v3.18 from Kevin Hilman:
- Add new driver for Rockchip IO voltage domains
- update MAINTAINERS to reflect maintenance of drivers/power/avs/*
* tag 'avs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux:
MAINTAINERS: update entry for drivers/power/avs
PM / AVS: rockchip-io: add driver handling Rockchip io domains
