Add a device tree property to override the minimum and maximum
charger buck/boost switching frequency.
Change-Id: I6b827157c23a389edf2daa412e6825b6ce07a886
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
On PM660 the charger buck/boost frequency is configured in
the same register. Present ordering of the sink/source
removal function call causes incorrect charger frequency
configuration.
Fix this by first calling sink_removal and then source_insertion
function. Also, configure the buck frequency to the initial
5V USB value during source insertion.
Change-Id: I0d436f7e0843f2ddaa3d09db05cec403d03b6893
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
An error message is printed even when the task's scheduling class
is switched back successfully. Fix the error condition check and
print the error value in the message.
Change-Id: Ib75c4cfa22d58dd9309542e96096ac4e91f0c3db
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
This patch updates the global variables and checks
for the logging mode status to mark the buffer
status properly.
CRs-Fixed: 2033760
Change-Id: I29a13e2fecaecacc1a0f46358ae7d4db1d2b3786
Signed-off-by: Manoj Prabhu B <bmanoj@codeaurora.org>
Unlock spin lock before returning in case of
tasklet overflow. Increase tasklet queue size
to avoid tasklet overflow.
Change-Id: If9dc03b8dc0bd026b904b6339dd7a7c9c6443871
Signed-off-by: Abhishek Kondaveeti <akondave@codeaurora.org>
In the shutdown hook, driver forces adapter to 5V but
there is a possibility that the source change IRQ triggers
and moves back the adapter to 9V.
To avoid this and any race between the irq's and shutdown path,
disable all irqs as the first step in shutdown path.
CRs-Fixed: 2032575
Change-Id: I0d8f59a73b6631e9bf6f5d64dd215c239e7772fe
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Module parameter allows to load specific FW used
for FTM testing.
Change-Id: Ic6b4e1596edc0068a6cbd656ec7dfb82746c3f8a
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
global_state file output is prepared by reading the members of CPU
and cluster data structures. These members are updated under state_lock,
so acquire the same lock while preparing the output.
Change-Id: I8cb3ca6f9100a24f0bc9b293d364ad6aa8aabefb
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Currently, RATE_CFG registers are updated when the auto resonance
is enabled and no errors are seen with auto resonance or the play
rate is within allowed limits. However, it is getting updated
multiple times with the same play rate multiple times. This adds
up some delay in a critical path when the haptics duration is
small. While at it, add APIs to do multiple read/writes to the
peripheral registers like AUTO_RES_LO/HI and RATE_CFG1/2.
Change-Id: I1b5625cc1f9aa3f07552a6b4ef23f2d34241b6a1
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Currently, variable "val" is used for caching the last value
written to EN_CTL1 register and also it is used to read STATUS
register. This causes an incorrect value being written to
EN_CTL1 register when the module is disabled. Fix it.
CRs-Fixed: 2032850
Change-Id: Ib3cbe1b41962e5dff38d9c4d343d8f3f43fc0009
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Add support for sensor and Region of Interest (ROI) events.
Create new ioctl to receive sensor data from userspace.
Create binary sysfs entries to expose data from kernel to
userspace.
Change-Id: Ifa76f08eb293c3da0618c22c07e65976319ea926
Signed-off-by: Alex Sarraf <asarraf@codeaurora.org>
Add debug events for CPU_STARTING and CPU_DYING events when a CPU is
hotplugged. The events will help correlate with the TZ events using the
ARM timers counts for debug.
Change-Id: Ieb6449575b4a95974b787ceea430fc5362c77c29
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
If any data traffic is ON, when SSR is triggered there is a crash
since we allowed HTT packets to go through.
Stopping these packets to go through fixes this crash.
Also changing the QMI client ID for the qmi client.
CRs-Fixed: 2033262
Change-Id: I1236ef901fd8943f228497a79f11feaec1c16d8e
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Configure APC0/1 CPR instances to operate in closed-loop operation
to maintain an optimal voltage set point on the APC0/1 voltage rails.
Also, add static open-loop and closed-loop voltage margins as per
the voltage characterization results.
CRs-Fixed: 2032723
Change-Id: I1a01d78252dc71ca7def251e99581cad3714cdd1
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Set resetting flag early when stopping AP to avoid
disconnect events as a result of disconnect command
sent during AP stop procedure.
Change-Id: I59647d5775e68705b361b1aaacbc6a6088e9c813
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Existing code that ignores connection events during
reset flow will never take effect since it locks the
same mutex taken by the reset flow.
In addition, in case of unsolicited disconnect events ignore
those as well since device is about to get reset.
Change-Id: I132040822b8c1b3d1d92965d578ed5bee0b3d1cf
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
The minimum supported voltage on the SMPS5A is 1.224V, update
it accordingly.
Change-Id: Ib973febdf5b719836f5fb54e6cd6e797e7101e3e
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
