13c589d5b0 ("sysfs: use seq_file when reading regular files")
switched sysfs from custom read implementation to seq_file to enable
later transition to kernfs. After the change, the buffer passed to
->show() is acquired through seq_get_buf(); unfortunately, this
introduces a subtle behavior change. Before the commit, the buffer
passed to ->show() was always zero as it was allocated using
get_zeroed_page(). Because seq_file doesn't clear buffers on
allocation and neither does seq_get_buf(), after the commit, depending
on the behavior of ->show(), we may end up exposing uninitialized data
to userland thus possibly altering userland visible behavior and
leaking information.
Fix it by explicitly clearing the buffer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ron <ron@debian.org>
Fixes: 13c589d5b0 ("sysfs: use seq_file when reading regular files")
Cc: stable <stable@vger.kernel.org> # 3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up file names and locations. Get rid of include/ directory and move
those up to the top-level. Rename files to get rid of upper case. Remove
skeinBlockNo3F.c as it was unused (temporary file or something?).
Signed-off-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel fixes for regressions, black screens and hangs, for 3.15.
* tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Increase WM memory latency values on SNB
drm/i915: restore backlight precision when converting from ACPI
drm/i915: Use the first mode if there is no preferred mode in the EDID
drm/i915/dp: force eDP lane count to max available lanes on BDW
drm/i915/vlv: reset VLV media force wake request register
drm/i915/SDVO: For sysfs link put directory and target in correct order
drm/i915: use lane count and link rate from VBT as minimums for eDP
drm/i915: clean up VBT eDP link param decoding
drm/i915: consider the source max DP lane count too
assign pDevice->byBBPreEDIndex to ed_idx and change ed_inx
value in switch.
If ed_inx == byBBPreEDIndex and not bScanning return out.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create variables cr_201 and cr 206 with values for registers 0xc9 and 0xce.
Set both to zero .
If cr201 and cr206 are zero drop out.
write both out with ControlvWriteByte.
pDevice->byBBPreEDIndex breaks will be dealt with in next patch
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace DBG_PRT with single dev_dbg with calling function
and byBBPreEDRSSI value.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is based on viawget, proprietary version of wpa supplicant.
The code is not compatible with the current version of hostapd.
It may be possible to implement when the driver is fully converted
to mac80211.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mixing upper and lower case in names of macros like It_Is_Macro is
not accepted in the Linux Kernel. To prepare skein driver for mainline
inclusion, we rename all macros to uppercase or lowercase names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux Kernel use capitalized names for enum. To prepare skein
driver to mainline inclusion, we rename all enums to capitalized
names.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code have skein_512_ctx and skein_256_ctx but skein1024_ctx.
It would be logical to convert these names to a single form.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
camelCase is not accepted in the Linux Kernel. To prepare skein
driver for mainline inclusion, we rename all vars to
non-camelCase equivalents.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
camelCase is not accepted in the Linux Kernel. To prepare skein
driver for mainline inclusion, we rename all functions to
non-camelCase equivalents.
Signed-off-by: Anton Saraev <antonysaraev@gmail.com>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit e783c51 (ahci: imx: software workaround for phy reset issue
in resume) calls imx_sata_phy_reset() to reset phy immediately after
SATA MPLL is enabled. It seems working fine mostly, but fails in some
case as below.
...
ahci-imx 2200000.sata: failed to reset phy: -110
ahci-imx: probe of 2200000.sata failed with error -110
After talking to the designer, we learnt that when enabling i.MX6Q SATA
MPLL, we need to wait 100us for it to settle down for safety. Add this
required delay to fix above failure.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fengguang's randconfig kernel build tester discovered the following
warnings:
warning: (CRYPTO_THREEFISH) selects CRYPTO_ALGAPI which has unmet direct dependencies (CRYPTO)
warning: (DM_VERITY && CRYPTO_SKEIN) selects CRYPTO_HASH which has unmet direct dependencies (CRYPTO)
Fix this in the Kconfig by depending on CRYPTO.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary curly braces of if statements in dgnc_neo.c and
dgnc_tty.c to meet kernel coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix indenting of if-else statement in dgnc_neo.c and dgnc_tty.c
so that following else-if or else statement meets coding style.
Signed-off-by: Masaru Nomura <massa.nomura@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SetLCDStdMode is not supported as of 34c13ee2b6 ("staging: xgifb: drop
code for legacy VGA modes").
DisableLCD24bpp defined to zero was never realy useful and went away with
aa56b2790a ("staging: xgifb: vb_table: delete XGI21_LCDCapList").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was left uninitialized, likely overseen, in this commit:
56810a92c6 ("staging: xgifb: use XGIRegInit()
Avoid copy-paste and use XGIRegInit() to initialize registers addresses.")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XGI_VB_CHIP_TYPE, PCI_DEVICE_ID_XGI_42 and PCI_DEVICE_ID_XGI_27
are never defined.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bCCK is always true remove all false conditions and
local variable.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commands macros are common to all source files.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
