The current driver probe() function assumes the sensor device to be
always present and gets executed every time if the driver is loaded,
but the appropriate hardware could not be present.
So, move the platform device creation as part of platform init code
and use the 'id_table' to check if the device is present or not.
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The iio subsystem supports humidity sensors, so it makes sense
to support it in the iio-hwmon bridge as well.
Cc: Jonathan Cameron <jic23@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add simple on/off regulator support for ltc2978 and
other pmbus parts supported by the ltc2978 driver.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for simple on/off control of each channel.
To add regulator support, the pmbus part driver needs to add
regulator_desc information and number of regulators to its
pmbus_driver_info struct.
regulator_desc can be declared using default macro for a
regulator (PMBUS_REGULATOR) that is in pmbus.h
The regulator_init_data can be initialized from either
platform data or the device tree.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device tree bindings documentation for ltc2978.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
[Guenter Roeck: Minor correction of 'compatible' example]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 0b8db271f1 ("ACPI / video: check _DOD list when creating
backlight devices") checks if the video device is in the bind devices
list to decide if we should create backlight device for it, that causes
problem for one Dell Latitude E6410, where none of the video output
devices are properly bound due to the way how we did the comparing
between its _ADR and the _DOD's values. Solve this problem by comparing
the lower 12 bits of both the device's _ADR and the _DOD's values instead
of relying on bind result.
Fixes: 0b8db271f1 ("ACPI / video: check _DOD list when creating backlight devices")
Reported-and-tested-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull drm fixes from Dave Airlie:
"Two i915 regressions and one dual-gpu laptop radeon fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
drm/i915: Cancel vdd off work before suspend
drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
The SDMMC, SDIO and EMMC controllers use an external FIFO whose size is 256x32bit.
This patch set the corresponding fifo-depth properties for both RK3066 and RK3188.
Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The leds-gpio driver recently switched to the device property API. The device_node
name is no longer retrieved if the "label" devicetree property is not found.
In this case the driver tries to create entries with (null) name in
/sys/class/leds, which is wrong and generates backtrace as several gpio_leds have
the same name. Also renamed subnode "yellow" to "blue" to match the last
schematics updates.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Don Bailey noticed that our page zeroing for compression at end-io time
isn't complete. This reworks a patch from Linus to push the zeroing
into the zlib and lzo specific functions instead of trying to handle the
corners inside btrfs_decompress_buf2page
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reported-by: Don A. Bailey <donb@securitymouse.com>
cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The suspend/resume sequence on Armada XP needs to modify a number of
registers in the SDRAM controller. Therefore, this commit updates the
Armada XP Device Tree description to include the SDRAM controller
Device Tree node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-17-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
In order to support suspend/resume on Armada XP, an additional set of
registers need to be described at the MBus controller level. This
commit therefore adjusts the Device Tree of the Armada 370/XP SoC to
include those registers in the MBus controller description;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-16-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit improves the Armada XP GP Device Tree description to
describe the 3 GPIOs that are used to connect the SoC to the PIC
micro-controller that we talk to shutdown the SoC when entering
suspend to RAM.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-15-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Armada XP has multiple cores clocked by independent clocks. The
SMP startup code contains a function called set_secondary_cpus_clock()
called in armada_xp_smp_prepare_cpus() to ensure the clocks of the
secondary CPUs match the clock of the boot CPU.
With the introduction of suspend/resume, this operation is no longer
needed when booting the system, but also when existing the suspend to
RAM state. Therefore this commit reworks a bit the logic: instead of
configuring the clock of all secondary CPUs in
armada_xp_smp_prepare_cpus(), we do it on a per-secondary CPU basis in
armada_xp_boot_secondary(), as this function gets called when existing
suspend to RAM for each secondary CPU.
Since the function now only takes care of one CPU, we rename it from
set_secondary_cpus_clock() to set_secondary_cpu_clock(), and it looses
its __init marker, as it is now used beyond the system initialization.
Note that we can't use smp_processor_id() directly, because when
exiting from suspend to RAM, the code is apparently executed with
preemption enabled, so smp_processor_id() is not happy (prints a
warning). We therefore switch to using get_cpu()/put_cpu(), even
though we pretty much have the guarantee that the code starting the
secondary CPUs is going to run on the boot CPU and will not be
migrated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-14-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The armada_370_xp_cpu_resume() until now was used only as the function
called by the SoC when returning from a deep idle state (as used in
cpuidle, or when the CPU is brought offline using CPU hotplug).
However, it is now also used when exiting the suspend to RAM state. In
this case, it is the bootloader that calls back into this function,
with the MMU left enabled by the BootROM. Having the MMU enabled when
entering this function confuses the kerrnel because we are not using
the kernel page tables at this point, but in other mvebu functions we
use the information on whether the MMU is enabled or not to find out
whether we should talk to the coherency fabric using a physical
address or a virtual address. To fix that, we simply disable the MMU
when entering this function, so that the kernel is in an expected
situation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-13-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
On the Armada XP GP platform, entering suspend to RAM state is
triggering by talking to an external PIC micro-controller connected to
the SoC using 3 GPIOs. There is then a small magic sequence of GPIO
toggling that needs to be used to tell the PIC to turn off the SoC.
The code uses the Device Tree to find out which GPIOs are used to
connect to the PIC micro-controller, and then registers its
mvebu_armada_xp_gp_pm_enter() callback to the SoC-level PM code. The
SoC PM code will call back into this registered function at the very
end of the suspend procedure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-12-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
When going out of suspend to RAM, the Marvell EBU platforms go through
the bootloader, which re-configures the DRAM controller. To achieve
this, the bootloader executes a piece of code called the "DDR3
training code". It does some reads/writes to the memory to find out
the optimal timings for the memory chip being used.
This has the nasty side effect that the first 10 KB of each DRAM
chip-select are overwritten by the bootloader when exiting the suspend
to RAM state.
Therefore, this commit implements the ->reserve() hook for the 'struct
machine_desc' used on Armada XP, to reserve the 10 KB of each DRAM
chip-select using the memblock API.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-11-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit implements the core of the platform code to enable
suspend/resume on Armada XP. It registers the platform_suspend_ops
structure, and implements the ->enter() hook of this structure.
It is worth mentioning that this commit only provides the SoC-level
part of suspend/resume, which calls into some board-specific code
provided in a follow-up commit.
The most important thing that this SoC-level code has to do is to
build an in-memory structure that contains a magic number, the return
address in the kernel after resume, and a set of address/value
pairs. This structure is used by the bootloader to restore a certain
number of registers (according to the set of address/value pairs) and
then jump back into the kernel at the provided location.
The code also puts the SDRAM into self-refresh mode, before calling
into board-specific code to actually enter the suspend to RAM state.
[ jac - add email exchange between Andrew Lunn and Thomas Petazzoni to better
describe who consumes the address/value pairs ]
> > Is this a well defined mechanism supported by mainline uboot, barebox
> > etc. Or is it some Marvell extension to their uboot?
>
> As far as I know, it is a Marvell extension to their "binary header",
> so it's done even before U-Boot starts. Since the hardware needs
> assistance from the bootloader to do suspend/resume, there is
> necessarily a certain amount of cooperation/agreement needed by what
> the kernel does and what the bootloader expects. I'm not sure there's
> any "standard" mechanism here. Do you know of any?
>
> I know the suspend/resume on the Blackfin architecture works the same
> way (at least it used to work that way years ago when I did a bit of
> Blackfin stuff). And here as well, there was some cooperation between
> the kernel and the bootloader. See
> arch/blackfin/mach-common/dpmc_modes.S, function do_hibernate() at the
> end.
>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-10-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit adds suspend/resume support for the gatable clock driver
used on Marvell EBU platforms. When getting out of suspend, the
Marvell EBU platforms go through the bootloader, which re-enables all
gatable clocks. However, upon resume, the clock framework will not
disable again all gatable clocks that are not used.
Therefore, if the clock driver does not save/restore the state of the
gatable clocks, all gatable clocks that are not claimed by any device
driver will remain enabled after a resume. This is why this driver
saves and restores the state of those clocks.
Since clocks aren't real devices, we don't have the normal ->suspend()
and ->resume() of the device model, and have to use the ->suspend()
and ->resume() hooks of the syscore_ops mechanism. This mechanism has
the unfortunate idea of not providing a way of passing private data,
which requires us to change the driver to make the assumption that
there is only once instance of the gatable clock control structure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-9-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
On Marvell EBU platforms, when doing suspend/resume, the SDRAM window
configuration must be saved on suspend, and restored on
resume. However, it needs to be restored on resume *before*
re-entering the kernel, because the SDRAM window configuration defines
the layout of the memory. For this reason, it cannot simply be done in
the ->suspend() and ->resume() hooks of the mvebu-mbus driver.
Instead, it needs to be restored by the bootloader "boot info"
mechanism used when resuming. This mechanism allows the kernel to
define a list of (address, value) pairs when suspending, that the
bootloader will restore on resume before jumping back into the kernel.
This commit therefore adds a new function to the mvebu-mbus driver,
called mvebu_mbus_save_cpu_target(), which will be called by the
platform code to make the mvebu-mbus driver save the SDRAM window
configuration in a way that can be understood by the bootloader "boot
info" mechanism.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-8-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit extends the mvebu-mbus driver to provide suspend/resume
support. Since mvebu-mbus is not a platform_driver, the syscore_ops
mechanism is used to get ->suspend() and ->resume() hooks called into
the driver.
In those hooks, we save and restore the MBus windows state, to make
sure after resume all Mbus windows are properly restored. Note that
while the state of some windows could be gathered by looking again at
the Device Tree (for statically described windows), it is not the case
of dynamically described windows such as the PCIe memory and I/O
windows. Therefore, we take the simple approach of saving and
restoring the registers for all MBus windows.
In addition, the commit extends the Device Tree binding of the MBus
controller, to control the MBus bridge registers (which define which
parts of the physical address space is routed to MBus windows
vs. normal RAM memory). Those registers must be saved and restored
during suspend/resume. The Device Tree binding extension is made is a
backward compatible fashion, but of course, suspend/resume will not
work without the Device Tree update.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1416585613-2113-7-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit adds a set of suspend/resume syscore_ops to respectively
save and restore a number of timer registers, in order to make sure
the clockevent and clocksource devices continue to work properly
across a suspend/resume cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/1416585613-2113-5-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit adds suspend/resume support to the irqchip driver used on
Armada XP platforms (amongst others). It does so by adding a set of
suspend/resume syscore_ops, that will respectively save and restore
the necessary registers to ensure interrupts continue to work after
resume.
It is worth mentioning that the affinity is lost during a
suspend/resume cycle, because when a secondary CPU is brought
off-line, all interrupts that are assigned to this CPU in terms of
affinity gets re-assigned to a still running CPU. Therefore, right
before entering suspend, all interrupts are assigned to the boot CPU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: linux-kernel@vger.kernel.org
Link: https://lkml.kernel.org/r/1416585613-2113-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Original code only check/alloc plat_dat for the CONFIG_OF case, this
patch check/alloc it earlier and unconditionally to avoid kernel build
warnings:
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:275
stmmac_pltfr_probe() warn: variable dereferenced before check 'plat_dat'
V2: Fix coding style.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current driver, allocation size of skb does not care the alignment
adjust after allocation.
And also, in the current implementation, buffer alignment method by
sh_eth_set_receive_align function has a bug that this function displace
buffer start address forcedly when the alignment is corrected.
In the result, tail of the skb will exceed allocated area and kernel panic
will be occurred.
This patch fix this issue.
Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_link_get_net() holds a reference on the 'struct net', we need to release
it in case of error.
CC: Eric W. Biederman <ebiederm@xmission.com>
Fixes: b51642f6d7 ("net: Enable a userns root rtnl calls that are safe for unprivilged users")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 7f28fa10 ("bonding: add arp_ip_target netlink support")
Reported-by: John Fastabend <john.fastabend@gmail.com>
Cc: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull irq fixes from Thomas Gleixner:
"Three fixlets from the ARM SoC camp:
- correct irqdomain initialization for atmel-aic
- correct error handling for device tree parsing in bcm controllers"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map
irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map
irqchip: atmel-aic: Fix irqdomain initialization
This is a set of ten fixes: 8 for UFS including four static checker warnings,
a potential null deref in the voltage regulator code, a race on module unload,
a ref counting fix on the well known LUNs which made it impossible to remove
the ufs module and fix to correct the information in pwr_info. In addition to
UFS, there's a blacklist for the Intel Multi-Flex array which chokes on report
supported operation codes and a fix to an oops in bnx2fc caused by shared
skbs.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJUeXohAAoJEDeqqVYsXL0MKUMH/3/+cCrlKRHlYxY7wB3/7J4+
iVF5zC75598YAXfFWSkQqcITRsL8Azd7A+hd58a1JDNaA3VrpGW0E5fEYcBekJB9
wzbOPeAfq0G7hPfJ2nIP8exuJAAo84bHB3XmcduT0QubqfnQib1QG7oxX8qcGYP7
PeP/aXGYe/b7E9m7xSAxuYsnvc/XZwKqmGcIdkvf+GRbke1DYR+52zYWa4alwgiY
mKLZwn3LOOOGlYqbu6B1m4/Swfv1r5weWCtDXnHaX1Hy/wMZCR+GUtVfm+Qh3EXs
5vLSk7BPNnTS/WEe/z3qYmnPAvFcEe7Z0fKxHxQT/n1F4AdvLds/B98C871UtiQ=
=VKAj
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten fixes: 8 for UFS including four static checker
warnings, a potential null deref in the voltage regulator code, a race
on module unload, a ref counting fix on the well known LUNs which made
it impossible to remove the ufs module and fix to correct the
information in pwr_info.
In addition to UFS, there's a blacklist for the Intel Multi-Flex array
which chokes on report supported operation codes and a fix to an oops
in bnx2fc caused by shared skbs"
[ For us non-SCSI people: "UFS" here is "Universal Flash Storage" not
the filesystem. - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ufs: fix NULL dereference when no regulators are defined
ufs: ensure clk gating work is finished before module unloading
scsi: ufs: fix static checker warning in ufshcd_parse_clock_info
scsi: ufs: fix static checker warning in __ufshcd_setup_clocks
scsi: ufs: fix static checker warning in ufshcd_populate_vreg
scsi: ufs: fix static checker errors in ufshcd_system_suspend
ufs: fix power info after link start-up
ufs: fix reference counting of W-LUs
scsi: add Intel Multi-Flex to scsi scan blacklist
bnx2fc: do not add shared skbs to the fcoe_rx_list
Here are some Staging and IIO driver fixes for 3.18-rc7 that resolve a
number of reported issues, and a new device id for a staging wireless
driver.
All of these have been in linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlR4+R4ACgkQMUfUDdst+ynr6ACgwT/lNLkrC9it9f46Wzlrx+G7
vH0An1OPrgAGjpiu8LYou1CpzsJkMTAq
=3+bs
-----END PGP SIGNATURE-----
Merge tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some staging and IIO driver fixes for 3.18-rc7 that resolve a
number of reported issues, and a new device id for a staging wireless
driver.
All of these have been in linux-next"
* tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID for DLink GO-USB-N150
staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd
iio: accel: bmc150: set low default thresholds
iio: accel: bmc150: Fix iio_event_spec direction
iio: accel: bmc150: Send x, y and z motion separately
iio: accel: bmc150: Error handling when mode set fails
iio: gyro: bmg160: Fix iio_event_spec direction
iio: gyro: bmg160: Send x, y and z motion separately
iio: gyro: bmg160: Don't let interrupt mode to be open drain
iio: gyro: bmg160: Error handling when mode set fails
iio: adc: men_z188_adc: Add terminating entry for men_z188_ids
iio: accel: kxcjk-1013: Fix kxcjk10013_set_range
iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
Here is a single revert for the of-serial driver that resolves a
reported issue.
This revert has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlR4+KcACgkQMUfUDdst+ykQiwCglYDZ1zGBpqulsviysX5vT1nM
1ycAnjiZCWWodRGCF0lHyyl/mxtRb6G0
=NquU
-----END PGP SIGNATURE-----
Merge tag 'tty-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fix from Greg KH:
"Here is a single revert for the of-serial driver that resolves a
reported issue.
This revert has been in linux-next for a while"
* tag 'tty-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: of-serial: add PM suspend/resume support"
Here are some USB driver fixes and new device ids for 3.18-rc7.
Full details are in the shortlog, and all of these have been in the
linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlR4+ZAACgkQMUfUDdst+ylSwQCfaS767td92FsGWX72y5nzt9+h
HmoAoMT4V3REnelEXI8e6wc0vJs8BPlb
=+Oc7
-----END PGP SIGNATURE-----
Merge tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 3.18-rc7.
Full details are in the shortlog, and all of these have been in the
linux-next tree for a while"
* tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000
usb: xhci: rework root port wake bits if controller isn't allowed to wakeup
USB: xhci: Reset a halted endpoint immediately when we encounter a stall.
Revert "xhci: clear root port wake on bits if controller isn't wake-up capable"
USB: xhci: don't start a halted endpoint before its new dequeue is set
USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012
USB: ssu100: fix overrun-error reporting
USB: keyspan: fix overrun-error reporting
USB: keyspan: fix tty line-status reporting
usb: serial: ftdi_sio: add PIDs for Matrix Orbital products
usb: dwc3: ep0: fix for dead code
USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
This will select the appropriate register layout based on the DT
"compatible" string.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There are at least 4 incompatible variations of this hardware block,
so let's use the ARB_* constants as a table index instead of hardcoding
specific register offsets. Also, allow for the possibility of adding
old devices that are missing some of the registers.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
These will be used to abstract out chip-to-chip differences.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
BCM7xxx ARM and MIPS platforms share a similar hardware block for
reporting GISB errors, so they both benefit from the use of this driver.
Conditionally compile the ARM-specific bus error handler so that the
GISB error IRQ handler works on other architectures.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
further clean up work.
Note that we still have dependencies to the legacy booting for
omap3 board-*.c files for setting up the board specific memory
timings. For that we need the timing related things still exposed
in include/linux/omap-gpmc.h. This will all become private data
to the GPMC driver once the legacy booting support can be dropped.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUeOpCAAoJEBvUPslcq6VzJz4P/2ZSZ1L8rdc4Y4sLfBJndmd2
KPrPhjDqUDG8RibLroRN1j5dOpL5FmsfwOvCAuMCFm94SkduP5rKLKzaY/ablKRM
TW2YtN4TJ1tG6LF6OhFZcusuD3wX08JSGfmYj443WQ3FcMyIygaj5v5GmV0Ldj2G
4hN47UKStOWDCQjBCqfdB4F3kB8vbnrkA4j7BTw/Ng8+iWUhQsu9TVnm46ZktBS0
nalA3BOvm5vGEDIUTmDh7VtSejadndUwmWOhl2VPxPp7uhfUxlmW/Rtg2fUZM9iw
UbxplCKD9ddh2cpinO2EHL0XGl1LioR44pD8RpoCs4SlbRmj4/PoMMqGyXl02mkS
F/7O42OzNoWD93LvR1Oh9vWcuytV8laWHKKNYN/Lndv1AiLJvkUvoS0STDe62sVY
G9laqOSh+YRR6jIZQ4ZhZ1/Z7SJJaP5ot8MKlJOnpR0O4tL+GTlrpTGuE3RlvAaM
7AE4X/0n46UCYfDqJpQTusLRKJLKutyyvAk5gCmoAUcUSLhdGQHjCv0ygebD4YxY
U7bDV+jQunCsZpBXeDnQEjvQstHq7S0dRLo4oxj8rJOto/PpdQ70orenSaSDzDfQ
hxeT9pUC0CK+K4NP3PVmeSEEhV3RTY/T4n7gTuBIt8sEqSEUjm4hhu/mrL/OYNLm
fX5AhGQ6EUx/Mq4NtTdF
=O1GC
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.19/gpmc-move-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/omap-gpmc
Pull "move omap gpmc to drivers finally" from Tony Lindgren:
We can finally move the GPMC code to live in drivers/memory for
further clean up work.
Note that we still have dependencies to the legacy booting for
omap3 board-*.c files for setting up the board specific memory
timings. For that we need the timing related things still exposed
in include/linux/omap-gpmc.h. This will all become private data
to the GPMC driver once the legacy booting support can be dropped.
* tag 'omap-for-v3.19/gpmc-move-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
memory: gpmc: Move omap gpmc code to live under drivers
ARM: OMAP2+: Move GPMC initcall to devices.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull thermal fixes from Eduardo Valentin:
"In this -rc still very minor changes:
- Lee Jones fixes compilation warning in sti thermal driver
- Marjus Elfring removes unnecessary checks in exynos thermal driver
(as per coccinelle)
- Now we always update cpufreq policies, and thus get (hopefully)
always in sync with cpufreq, thanks to Yadwinder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: Exynos: Deletion of unnecessary checks before two function calls
thermal: sti: Ignore suspend/resume functions when !PM_SLEEP
thermal: cpu_cooling: Update always cpufreq policy with thermal constraints
No excitement, here are only minor fixes: an endian fix for the
new DSD format we added in 3.18, a fix for HP mute LED, and a
fix for Native Instrument quirk.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=azkh
-----END PGP SIGNATURE-----
Merge tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No excitement, here are only minor fixes: an endian fix for the new
DSD format we added in 3.18, a fix for HP mute LED, and a fix for
Native Instrument quirk"
* tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
ALSA: hda - One more HP machine needs to change mute led quirk
ALSA: usb-audio: Use snd_usb_ctl_msg() for Native Instruments quirk
This contains a single fix for a bug that was introduced back in v3.13.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=LOvM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/fixes-non-critical
Pull "ARM: tegra: Core code changes for v3.19" from Thierry Reding:
This contains a single fix for a bug that was introduced back in v3.13.
* tag 'tegra-for-3.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Re-add removed SoC id macro to tegra_resume()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJUbxedAAoJEN0jrNd/PrOhhXwP/2cgwNifgZDlb7knt5ObII/Q
JtHVEi/kv0YpYJ3YK+lWt2HCmq7ueoE4VVQ6/SmEtvfCy2HBxMxSesQ0vLdGHUQT
uJ6hSh2geeL8SHdfO+asTCDgiVkWyA84dcYJ3QKCnCnFCGHaiYxwvVnVTI1t1q/c
dJueREtQl07HkQJWki3hQM2beSmt08ytJ9tK14aR4vs7O/Cl08KyHTayyMM7A5Ns
D2UuIMBr+naoyqzea/ZL9ywRZB/osBmOMaQqKp1rZpCPLVAGB0Ea4rix1Gh4oe/F
AQ3lIJXO5RbW7ry033i4QUYuGzyK/+UyHpORB81tOxqSKEnrb7cdRzdUYst/0WQp
f2jQt9BXiBYVqXqP/csxthvPiCxBEgNQmy0aae4OHa0CHqe5fJNMypkWMaTFdFsB
Wm8K/GFWRJE2xjk5nYEFmPLBbY5eUmznXEL+WZw1XagGScKNj3msbSQSr2rA19sW
ZaSA6z+ToGnt1QwfRGorQIro+HB7krQ3tKM8x9GmZFISQfCjy6AqIGNFtEvcz/4L
o/qZPjLLr4FBPHyM6II8yonQtRaK3ahc9hx7GNm2TQ7MsfU2rKicRcxGcBbJaZEc
hBSq2ripHoKBGg/5NQmjt74nRkFHCmnhqLlF89DKO7kapoUvEoYMzXpJ934k0ehz
z2xXp/Aid/7Tukgxj15H
=/I47
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Pull "ARM: tegra: Default configuration changes for v3.19" from Thierry Reding:
This is merely a regeneration of the default configuration to get rid of
two symbols that are now enabled by default or removed.
* tag 'tegra-for-3.19-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Regenerate default configuration
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The most important part is adding the axi bus to the SoC dtsi file,
this is the main bus on the SoC.
These patches were all send to the arm list and I haven't got any
negative responses.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUd5jfAAoJEIZ0px9YPRMyQDgP/3EKRthup3LVF0K5Y/z256Xm
95F7fjrQSAeo47WXL5YkZPhFh2Brs0tcmR/Xt9J+sm4jRUMDgaa0DIH0R1FD6R/z
j7J2mLQ+NORMQg2A0gtJPJg+o/PMi9+jZ2I3D6dyewaQOemEbs7dej7INzRQWxik
8gKjIlPm0yKIcFnkLOg6W6++GseCM4DiP2714l6SM+W4hExZUQuVqW7yNR3Y2jPt
h3omY+kWUHIhjN7iOCvoF70x89d0pgYl6u9BIjda63a9flpiAUs7+0to1dgsSn3i
QWgIB0rxVPDrtW2TYmzxKNQgRlzKJzyzowlf+uqgE48Z9CwFlwirCIa6D8bOP27G
hJ7E7FgZZdKGI7W0OB2wru7jNLgwuVVursMh0ef7T1vQXJjZGqqXdCLQWx4i/XoW
PIPTvEwr37/oI8Zx9yxPW4jxKOmDK9lW17DR1JIn4C8QWMvWJ3/wcgUCpblWhY0k
yrtenOWc83NDcrcufonhr293lBuLi9gCZel58rkj3GP02/MijkcDSslVSCgO0nH8
YLQcTzU66vnwWAhVZXp5X0BJtkAvmbxXXkKqJxa1nGMpr8aF7QHKPFZPmRqzhnHG
JKLdANoaPygJjHACgkPjvUetIdv95Pq4CRXppsqcnm7tzu6nn2LBRRxHQiXvVlyJ
7neCvZGAtQz/WpBSHriX
=oMPU
-----END PGP SIGNATURE-----
Merge tag 'bcm5301x-dt-2014-11-27' of https://github.com/hauke/linux into next/dt
Pull "ARM: BCM5301X: Add some more devices to device tree" from Hauke Mehrtens:
The most important part is adding the axi bus to the SoC dtsi file,
this is the main bus on the SoC.
These patches were all send to the arm list and I haven't got any
negative responses.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tag 'bcm5301x-dt-2014-11-27' of https://github.com/hauke/linux:
ARM: BCM5301X: Add LEDs for Netgear R6250 V1
ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Cortex-A5x TRM states in paragraph "9.2 Generic Timer functional
description" that generic timers provide an active-LOW interrupt
output. Fix the device trees to correctly describe this.
While doing this update the CPU mask to match the number of described
CPUs as well.
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Just four simple fixes this week:
- one missing of_node_put() on armv7 based mvebu
- forcing the USB host into the right mode on Chromebook (exynos5-snow)
- enabling two important drivers for exynos_defconfig
- fixing a noncritical bug for tegra that would cause a
regression with common code patches queued for 3.19
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=68UY
-----END PGP SIGNATURE-----
Merge tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Not much interesting going on fixes-wise for us this week, as it
should be for an -rc7. I'm not expecting Olof to work much over
Thanksgiving weekend, so I decided to take over again and push these
out to you.
Just four simple fixes this week:
- one missing of_node_put() on armv7 based mvebu
- forcing the USB host into the right mode on Chromebook
(exynos5-snow)
- enabling two important drivers for exynos_defconfig
- fixing a noncritical bug for tegra that would cause a regression
with common code patches queued for 3.19"
* tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: irq: fix buggy usage of irq_data irq field
ARM: exynos_defconfig: Enable max77802 rtc and clock drivers
ARM: dts: Explicitly set dr_mode on exynos5250-snow
ARM: mvebu: add missing of_node_put() call in coherency.c
Pull ARM fixes from Russell King:
"Another round of relatively small ARM fixes.
Thomas spotted that the strex backoff delay bit was a disable bit, so
it needed to be clear for this to work. Vladimir spotted that using a
restart block for the cache flush operation would return -EINTR, which
userspace was not expecting. Dmitry spotted that the auxiliary
control register accesses for Xscale were not correct"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8226/1: cacheflush: get rid of restarting block
ARM: 8222/1: mvebu: enable strex backoff delay
ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
