Look for sudden changes in the first and second derivatives in order
to eliminate outlier changes to target_highest_slotid (which are
due to out-of-order RPC replies).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we see a lot of bouncing for the value of highest_used_slotid
due to the fact that slots are getting freed, instead of getting instantly
transmitted to the next waiting task.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to preserve the rpc_task priority for things like writebacks,
that may have differing levels of urgency.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
All it does is pass its arguments through to another function. Let's
cut out the middleman...
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Privileged rpc calls are those that are run by the state recovery thread,
in cases where we're trying to recover the system after a server reboot
or a network partition. In those cases, we want to fence off all other
rpc calls (see nfs4_begin_drain_session()) so that they don't end up
using stateids or clientids that are in the process of being recovered.
Prior to this patch, we had to set up special callback functions in
order to declare an rpc call as being privileged.
By adding a new field to the sequence arguments, this patch simplifies
things considerably, and allows us to declare the rpc call as privileged
before it is run.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is more important to preserve the task priority behaviour, which ensures
that things like reclaim writes take precedence over background and kupdate
writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We shouldn't need to pass the 'cache_reply' parameter if we
initialise the sequence_args/sequence_res in the caller.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Nobody calls nfs4_setup_sequence or nfs41_setup_sequence without
also calling rpc_call_start() on success. This commit therefore
folds the rpc_call_start call into nfs41_setup_sequence().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no point in using nfs4_setup_sequence or nfs4_sequence_done
in pure NFSv4.1 functions. We already know that those have sessions...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server requests a lower target_highest_slotid, then ensure
that we ping it with at least one RPC call containing an
appropriate SEQUENCE op. This ensures that the server won't need to
send a recall callback in order to shrink the slot table.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This means that we end up statically allocating 128 bytes for the
bitmap on each slot table.
For a server that supports 1MB write and read I/O sizes this means
that we can completely fill the maximum 1GB TCP send/receive
windows.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_wait_clnt_recover and nfs4_client_recover_expired_lease are both
generic state related functions. As such, they belong in nfs4state.c,
and not nfs4proc.c
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Coalesce nfs4_check_drain_bc_complete and nfs4_check_drain_fc_complete
into a single function that can be called when the slot table is known
to be empty, then change nfs4_callback_free_slot() and nfs4_free_slot()
to use it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the NFSv4.1 session slot allocation fails due to an ENOMEM condition,
then set the task->tk_timeout to 1/4 second to ensure that we do retry
the slot allocation more quickly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC5661 requires us to make sure that the server knows we've updated
our slot table size by sending at least one SEQUENCE op containing the
new 'highest_slotid' value.
We can do so using the 'CHECK_LEASE' functionality of the state
manager.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The state manager no longer needs any special machinery to stop the
session flow and resize the slot table. It is all done on the fly by
the SEQUENCE op code now.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of an array of slots, use a singly linked list of slots that
can be dynamically appended to or shrunk.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow the server to control the size of the session slot table
by adjusting the value of sr_target_max_slots in the reply to the
SEQUENCE operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server wants to leave us with only one slot, or it wants
to "shrink" our slot table to something larger than we have now,
then so be it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that the NFSv4.1 CB_RECALL_SLOT callback updates the slot table
target max slotid safely.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the server tells us that it is dynamically resizing the session
replay cache, we should reset the sequence number for those slots
that have been deallocated.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Dynamic slot allocation in NFSv4.1 depends on the client being able to
track the server's target value for the highest slotid in the
slot table. See the reference in Section 2.10.6.1 of RFC5661.
To avoid ordering problems in the case where 2 SEQUENCE replies contain
conflicting updates to this target value, we also introduce a generation
counter, to track whether or not an RPC containing a SEQUENCE operation
was launched before or after the last update.
Also rename the nfs4_slot_table target_max_slots field to
'target_highest_slotid' to avoid confusion with a slot
table size or number of slots.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The caller doesn't do anything with the dentry, so there's no point in
holding a reference to it on return. Also cifs_prime_dcache better
describes the actual purpose of the function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This can reduce the size of the module by ~120KB which
could be useful for embedded systems.
$ size fs/cifs/built-in.o*
text data bss dec hex filename
388567 34459 100440 523466 7fcca fs/cifs/built-in.o.new
495970 34599 117904 648473 9e519 fs/cifs/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Make the compilation work again when CIFS_DEBUG is not #define'd.
Add format and argument verification for the various macros when
CIFS_DEBUG is not #define'd.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
We were checking incorrectly if signatures were required to be sent,
so were always sending signatures after the initial session establishment.
For SMB3 mounts (vers=3.0) this was a problem because we were putting
SMB2 signatures in SMB3 requests which would cause access denied
on mount (the tree connection would fail).
This might also be worth considering for stable (for 3.7), as the
error message on mount (access denied) is confusing to users and
there is no workaround if the server is configured to only
support smb3.0. I am ok either way.
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
It uses an undefined KERN_EVENT and is itself unused.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently, the code relies on the callers to do that and they all do,
but this will ensure that it's always done.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Now that the smb_vol contains the destination sockaddr, there's no need
to pass it in separately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Take advantage of accelerated strchr() on arches that support it.
Also, no caller ever passes in a NULL pointer. Get rid of the unneeded
NULL pointer check.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Otherwise, "ls -l" will simply show the ownership of the files as
the default mnt_uid/gid. This may make "ls -l" performance on large
directories super-suck in some cases, but that's the cost of cifsacl.
One possibility to make it suck less would be to somehow proactively
dispatch the ACL requests asynchronously from readdir codepath, but
that's non-trivial to implement.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The option to have a blank "pass=" already exists, and with
a password specified both "pass=%s" and "password=%s" are supported.
Also, both blank "user=" and "username=" are supported, making
"password=" the odd man out.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This patch enables optional for original SMB2 (SMB2.02) dialect
by specifying vers=2.0 on mount.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
If we netogiate mandatory locking style, have a read lock and try
to set a write lock we end up with a write lock in vfs cache and
no lock in cifs lock cache - that's wrong. Fix it by returning
from cifs_setlk immediately if a error occurs during setting a lock.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
that reacquires byte-range locks when a file is reopened.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
because the is no difference here. This also adds support of prefixpath
mount option for SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Error out with a clear error message if there is no unc= option. The
existing code doesn't handle this in a clear fashion, and the check for
a UNCip option with no UNC string is just plain wrong.
Later, we'll fix the code to not require a unc= option, but for now we
need this to at least clarify why people are getting errors about DFS
parsing. With this change we can also get rid of some later NULL pointer
checks since we know the UNC and UNCip will never be NULL there.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If we're using cifsacl, then we don't want to override the uid/gid with
the current uid/gid, since that would prevent you from being able to
upcall for this info.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...and make those symbols static in cifsacl.c. Nothing outside
of that file refers to them.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The format specifiers are for signed values, but these are unsigned.
Given that '-' is a delimiter between fields, I don't think you'd get
what you'd expect if you got a value here that would overflow the sign
bit.
The version and authority fields are 8 bit values so use a "hh" length
modifier there. The subauths are 32 bit values, so there's no need to
use a "l" length modifier there.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
According to several places on the Internet and the samba winbind code,
this is hard limited to 15 in windows, not 5. This does balloon out
the allocation of each by 40 bytes, but I don't see any alternative.
Also, rename it to SID_MAX_SUB_AUTHORITIES to match the alleged name
of this constant in the windows header files
Finally, rename SIDLEN to SID_STRING_MAX, fix the value to reflect
the change to SID_MAX_SUB_AUTHORITIES and document how it was
determined.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
...and lift the restriction in id_to_sid upcall that the size must be
at least as big as a full cifs_sid.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
..nothing outside of cifsacl.c calls it. Also fix the incorrect
comment on the function. It returns 0 when they match.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
