* msm-4.4/tmp-510d0a3f:
Linux 4.4.11
nf_conntrack: avoid kernel pointer value leak in slab name
drm/radeon: fix DP link training issue with second 4K monitor
drm/i915/bdw: Add missing delay during L3 SQC credit programming
drm/i915: Bail out of pipe config compute loop on LPT
drm/radeon: fix PLL sharing on DCE6.1 (v2)
Revert "[media] videobuf2-v4l2: Verify planes array in buffer dequeueing"
Input: max8997-haptic - fix NULL pointer dereference
get_rock_ridge_filename(): handle malformed NM entries
tools lib traceevent: Do not reassign parg after collapse_tree()
qla1280: Don't allocate 512kb of host tags
atomic_open(): fix the handling of create_error
regulator: axp20x: Fix axp22x ldo_io voltage ranges
regulator: s2mps11: Fix invalid selector mask and voltages for buck9
workqueue: fix rebind bound workers warning
ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC
vfs: rename: check backing inode being equal
vfs: add vfs_select_inode() helper
perf/core: Disable the event on a truncated AUX record
regmap: spmi: Fix regmap_spmi_ext_read in multi-byte case
pinctrl: at91-pio4: fix pull-up/down logic
spi: spi-ti-qspi: Handle truncated frames properly
spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden
spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
ALSA: hda - Fix broken reconfig
ALSA: hda - Fix white noise on Asus UX501VW headset
ALSA: hda - Fix subwoofer pin on ASUS N751 and N551
ALSA: usb-audio: Yet another Phoneix Audio device quirk
ALSA: usb-audio: Quirk for yet another Phoenix Audio devices (v2)
crypto: testmgr - Use kmalloc memory for RSA input
crypto: hash - Fix page length clamping in hash walk
crypto: qat - fix invalid pf2vf_resp_wq logic
s390/mm: fix asce_bits handling with dynamic pagetable levels
zsmalloc: fix zs_can_compact() integer overflow
ocfs2: fix posix_acl_create deadlock
ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang
net/route: enforce hoplimit max value
tcp: refresh skb timestamp at retransmit time
net: thunderx: avoid exposing kernel stack
net: fix a kernel infoleak in x25 module
uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h MIME-Version: 1.0
bridge: fix igmp / mld query parsing
net: bridge: fix old ioctl unlocked net device walk
VSOCK: do not disconnect socket when peer has shutdown SEND only
net/mlx4_en: Fix endianness bug in IPV6 csum calculation
net: fix infoleak in rtnetlink
net: fix infoleak in llc
net: fec: only clear a queue's work bit if the queue was emptied
netem: Segment GSO packets on enqueue
sch_dsmark: update backlog as well
sch_htb: update backlog as well
net_sched: update hierarchical backlog too
net_sched: introduce qdisc_replace() helper
gre: do not pull header in ICMP error processing
net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
samples/bpf: fix trace_output example
bpf: fix check_map_func_compatibility logic
bpf: fix refcnt overflow
bpf: fix double-fdput in replace_map_fd_with_map_ptr()
net/mlx4_en: fix spurious timestamping callbacks
ipv4/fib: don't warn when primary address is missing if in_dev is dead
net/mlx5e: Fix minimum MTU
net/mlx5e: Device's mtu field is u16 and not int
openvswitch: use flow protocol when recalculating ipv6 checksums
atl2: Disable unimplemented scatter/gather feature
vlan: pull on __vlan_insert_tag error path and fix csum correction
net: use skb_postpush_rcsum instead of own implementations
cdc_mbim: apply "NDP to end" quirk to all Huawei devices
bpf/verifier: reject invalid LD_ABS | BPF_DW instruction
net: sched: do not requeue a NULL skb
packet: fix heap info leak in PACKET_DIAG_MCLIST sock_diag interface
route: do not cache fib route info on local routes with oif
decnet: Do not build routes to devices without decnet private data.
parisc: Use generic extable search and sort routines
arm64: kasan: Use actual memory node when populating the kernel image shadow
arm64: mm: treat memstart_addr as a signed quantity
arm64: lse: deal with clobbered IP registers after branch via PLT
arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly
arm64: kasan: Fix zero shadow mapping overriding kernel image shadow
arm64: consistently use p?d_set_huge
arm64: fix KASLR boot-time I-cache maintenance
arm64: hugetlb: partial revert of 66b3923a1a0f
arm64: make irq_stack_ptr more robust
arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
efi: stub: use high allocation for converted command line
efi: stub: add implementation of efi_random_alloc()
efi: stub: implement efi_get_random_bytes() based on EFI_RNG_PROTOCOL
arm64: kaslr: randomize the linear region
arm64: add support for kernel ASLR
arm64: add support for building vmlinux as a relocatable PIE binary
arm64: switch to relative exception tables
extable: add support for relative extables to search and sort routines
scripts/sortextable: add support for ET_DYN binaries
arm64: futex.h: Add missing PAN toggling
arm64: make asm/elf.h available to asm files
arm64: avoid dynamic relocations in early boot code
arm64: avoid R_AARCH64_ABS64 relocations for Image header fields
arm64: add support for module PLTs
arm64: move brk immediate argument definitions to separate header
arm64: mm: use bit ops rather than arithmetic in pa/va translations
arm64: mm: only perform memstart_addr sanity check if DEBUG_VM
arm64: User die() instead of panic() in do_page_fault()
arm64: allow kernel Image to be loaded anywhere in physical memory
arm64: defer __va translation of initrd_start and initrd_end
arm64: move kernel image to base of vmalloc area
arm64: kvm: deal with kernel symbols outside of linear mapping
arm64: decouple early fixmap init from linear mapping
arm64: pgtable: implement static [pte|pmd|pud]_offset variants
arm64: introduce KIMAGE_VADDR as the virtual base of the kernel region
arm64: add support for ioremap() block mappings
arm64: prevent potential circular header dependencies in asm/bug.h
of/fdt: factor out assignment of initrd_start/initrd_end
of/fdt: make memblock minimum physical address arch configurable
arm64: Remove the get_thread_info() function
arm64: kernel: Don't toggle PAN on systems with UAO
arm64: cpufeature: Test 'matches' pointer to find the end of the list
arm64: kernel: Add support for User Access Override
arm64: add ARMv8.2 id_aa64mmfr2 boiler plate
arm64: cpufeature: Change read_cpuid() to use sysreg's mrs_s macro
arm64: use local label prefixes for __reg_num symbols
arm64: vdso: Mark vDSO code as read-only
arm64: ubsan: select ARCH_HAS_UBSAN_SANITIZE_ALL
arm64: ptdump: Indicate whether memory should be faulting
arm64: Add support for ARCH_SUPPORTS_DEBUG_PAGEALLOC
arm64: Drop alloc function from create_mapping
arm64: prefetch: add missing #include for spin_lock_prefetch
arm64: lib: patch in prfm for copy_page if requested
arm64: lib: improve copy_page to deal with 128 bytes at a time
arm64: prefetch: add alternative pattern for CPUs without a prefetcher
arm64: prefetch: don't provide spin_lock_prefetch with LSE
arm64: allow vmalloc regions to be set with set_memory_*
arm64: kernel: implement ACPI parking protocol
arm64: mm: create new fine-grained mappings at boot
arm64: ensure _stext and _etext are page-aligned
arm64: mm: allow passing a pgdir to alloc_init_*
arm64: mm: allocate pagetables anywhere
arm64: mm: use fixmap when creating page tables
arm64: mm: add functions to walk tables in fixmap
arm64: mm: add __{pud,pgd}_populate
arm64: mm: avoid redundant __pa(__va(x))
arm64: mm: add functions to walk page tables by PA
arm64: mm: move pte_* macros
arm64: kasan: avoid TLB conflicts
arm64: mm: add code to safely replace TTBR1_EL1
arm64: add function to install the idmap
arm64: unmap idmap earlier
arm64: unify idmap removal
arm64: mm: place empty_zero_page in bss
arm64: mm: specialise pagetable allocators
asm-generic: Fix local variable shadow in __set_fixmap_offset
Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules
arm64: Fix an enum typo in mm/dump.c
arm64: kasan: ensure that the KASAN zero page is mapped read-only
arch/arm64/include/asm/pgtable.h: add pmd_mkclean for THP
arm64: hide __efistub_ aliases from kallsyms
Linux 4.4.10
drm/i915/skl: Fix DMC load on Skylake J0 and K0
lib/test-string_helpers.c: fix and improve string_get_size() tests
ACPI / processor: Request native thermal interrupt handling via _OSC
drm/i915: Fake HDMI live status
drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
drm/i915: Fix eDP low vswing for Broadwell
drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
drm/radeon: make sure vertical front porch is at least 1
iio: ak8975: fix maybe-uninitialized warning
iio: ak8975: Fix NULL pointer exception on early interrupt
drm/amdgpu: set metadata pointer to NULL after freeing.
drm/amdgpu: make sure vertical front porch is at least 1
gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
nvmem: mxs-ocotp: fix buffer overflow in read
USB: serial: cp210x: add Straizona Focusers device ids
USB: serial: cp210x: add ID for Link ECU
ata: ahci-platform: Add ports-implemented DT bindings.
libahci: save port map for forced port map
powerpc: Fix bad inline asm constraint in create_zero_mask()
ACPICA: Dispatcher: Update thread ID for recursive method calls
x86/sysfb_efi: Fix valid BAR address range check
ARC: Add missing io barriers to io{read,write}{16,32}be()
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
propogate_mnt: Handle the first propogated copy being a slave
fs/pnode.c: treat zero mnt_group_id-s as unequal
x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
MAINTAINERS: Remove asterisk from EFI directory names
writeback: Fix performance regression in wb_over_bg_thresh()
batman-adv: Reduce refcnt of removed router when updating route
batman-adv: Fix broadcast/ogm queue limit on a removed interface
batman-adv: Check skb size before using encapsulated ETH+VLAN header
batman-adv: fix DAT candidate selection (must use vid)
mm: update min_free_kbytes from khugepaged after core initialization
proc: prevent accessing /proc/<PID>/environ until it's ready
Input: zforce_ts - fix dual touch recognition
HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk
HID: wacom: Add support for DTK-1651
xen/evtchn: fix ring resize when binding new events
xen/balloon: Fix crash when ballooning on x86 32 bit PAE
xen: Fix page <-> pfn conversion on 32 bit systems
ARM: SoCFPGA: Fix secondary CPU startup in thumb2 kernel
ARM: EXYNOS: Properly skip unitialized parent clock in power domain on
mm/zswap: provide unique zpool name
mm, cma: prevent nr_isolated_* counters from going negative
Minimal fix-up of bad hashing behavior of hash_64()
MD: make bio mergeable
tracing: Don't display trigger file for events that can't be enabled
mac80211: fix statistics leak if dev_alloc_name() fails
ath9k: ar5008_hw_cmn_spur_mitigate: add missing mask_m & mask_p initialisation
lpfc: fix misleading indentation
clk: qcom: msm8960: Fix ce3_src register offset
clk: versatile: sp810: support reentrance
clk: qcom: msm8960: fix ce3_core clk enable register
clk: meson: Fix meson_clk_register_clks() signature type mismatch
clk: rockchip: free memory in error cases when registering clock branches
soc: rockchip: power-domain: fix err handle while probing
clk-divider: make sure read-only dividers do not write to their register
CNS3xxx: Fix PCI cns3xxx_write_config()
mwifiex: fix corner case association failure
ata: ahci_xgene: dereferencing uninitialized pointer in probe
nbd: ratelimit error msgs after socket close
mfd: intel-lpss: Remove clock tree on error path
ipvs: drop first packet to redirect conntrack
ipvs: correct initial offset of Call-ID header search in SIP persistence engine
ipvs: handle ip_vs_fill_iph_skb_off failure
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
Revert: "powerpc/tm: Check for already reclaimed tasks"
arm64: head.S: use memset to clear BSS
efi: stub: define DISABLE_BRANCH_PROFILING for all architectures
arm64: entry: remove pointless SPSR mode check
arm64: mm: move pgd_cache initialisation to pgtable_cache_init
arm64: module: avoid undefined shift behavior in reloc_data()
arm64: module: fix relocation of movz instruction with negative immediate
arm64: traps: address fallout from printk -> pr_* conversion
arm64: ftrace: fix a stack tracer's output under function graph tracer
arm64: pass a task parameter to unwind_frame()
arm64: ftrace: modify a stack frame in a safe way
arm64: remove irq_count and do_softirq_own_stack()
arm64: hugetlb: add support for PTE contiguous bit
arm64: Use PoU cache instr for I/D coherency
arm64: Defer dcache flush in __cpu_copy_user_page
arm64: reduce stack use in irq_handler
arm64: Documentation: add list of software workarounds for errata
arm64: mm: place __cpu_setup in .text
arm64: cmpxchg: Don't incldue linux/mmdebug.h
arm64: mm: fold alternatives into .init
arm64: Remove redundant padding from linker script
arm64: mm: remove pointless PAGE_MASKing
arm64: don't call C code with el0's fp register
arm64: when walking onto the task stack, check sp & fp are in current->stack
arm64: Add this_cpu_ptr() assembler macro for use in entry.S
arm64: irq: fix walking from irq stack to task stack
arm64: Add do_softirq_own_stack() and enable irq_stacks
arm64: Modify stack trace and dump for use with irq_stack
arm64: Store struct thread_info in sp_el0
arm64: Add trace_hardirqs_off annotation in ret_to_user
arm64: ftrace: fix the comments for ftrace_modify_code
arm64: ftrace: stop using kstop_machine to enable/disable tracing
arm64: spinlock: serialise spin_unlock_wait against concurrent lockers
arm64: enable HAVE_IRQ_TIME_ACCOUNTING
arm64: fix COMPAT_SHMLBA definition for large pages
arm64: add __init/__initdata section marker to some functions/variables
arm64: pgtable: implement pte_accessible()
arm64: mm: allow sections for unaligned bases
arm64: mm: detect bad __create_mapping uses
Linux 4.4.9
extcon: max77843: Use correct size for reading the interrupt register
stm class: Select CONFIG_SRCU
megaraid_sas: add missing curly braces in ioctl handler
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
thermal: rockchip: fix a impossible condition caused by the warning
unbreak allmodconfig KCONFIG_ALLCONFIG=...
jme: Fix device PM wakeup API usage
jme: Do not enable NIC WoL functions on S0
bus: imx-weim: Take the 'status' property value into account
ARM: dts: pxa: fix dma engine node to pxa3xx-nand
ARM: dts: armada-375: use armada-370-sata for SATA
ARM: EXYNOS: select THERMAL_OF
ARM: prima2: always enable reset controller
ARM: OMAP3: Add cpuidle parameters table for omap3430
ext4: fix races of writeback with punch hole and zero range
ext4: fix races between buffered IO and collapse / insert range
ext4: move unlocked dio protection from ext4_alloc_file_blocks()
ext4: fix races between page faults and hole punching
perf stat: Document --detailed option
perf tools: handle spaces in file names obtained from /proc/pid/maps
perf hists browser: Only offer symbol scripting when a symbol is under the cursor
mtd: nand: Drop mtd.owner requirement in nand_scan
mtd: brcmnand: Fix v7.1 register offsets
mtd: spi-nor: remove micron_quad_enable()
serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock
ext4: fix NULL pointer dereference in ext4_mark_inode_dirty()
x86/mm/kmmio: Fix mmiotrace for hugepages
perf evlist: Reference count the cpu and thread maps at set_maps()
drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errors
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: rx8025: remove rv8803 id
rtc: ds1685: passing bogus values to irq_restore
rtc: vr41xx: Wire up alarm_irq_enable
rtc: hym8563: fix invalid year calculation
PM / Domains: Fix removal of a subdomain
PM / OPP: Initialize u_volt_min/max to a valid value
misc: mic/scif: fix wrap around tests
misc/bmp085: Enable building as a module
lib/mpi: Endianness fix
fbdev: da8xx-fb: fix videomodes of lcd panels
scsi_dh: force modular build if SCSI is a module
paride: make 'verbose' parameter an 'int' again
regulator: s5m8767: fix get_register() error handling
irqchip/mxs: Fix error check of of_io_request_and_map()
irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
spi/rockchip: Make sure spi clk is on in rockchip_spi_set_cs
locking/mcs: Fix mcs_spin_lock() ordering
regulator: core: Fix nested locking of supplies
regulator: core: Ensure we lock all regulators
regulator: core: fix regulator_lock_supply regression
Revert "regulator: core: Fix nested locking of supplies"
videobuf2-v4l2: Verify planes array in buffer dequeueing
videobuf2-core: Check user space planes array in dqbuf
USB: usbip: fix potential out-of-bounds write
cgroup: make sure a parent css isn't freed before its children
mm/hwpoison: fix wrong num_poisoned_pages accounting
mm: vmscan: reclaim highmem zone if buffer_heads is over limit
numa: fix /proc/<pid>/numa_maps for THP
mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
memcg: relocate charge moving from ->attach to ->post_attach
cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback
slub: clean up code for kmem cgroup support to kmem_cache_free_bulk
workqueue: fix ghost PENDING flag while doing MQ IO
x86/apic: Handle zero vector gracefully in clear_vector_irq()
efi: Expose non-blocking set_variable() wrapper to efivars
efi: Fix out-of-bounds read in variable_matches()
IB/security: Restrict use of the write() interface
IB/mlx5: Expose correct max_sge_rd limit
cxl: Keep IRQ mappings on context teardown
v4l2-dv-timings.h: fix polarity for 4k formats
vb2-memops: Fix over allocation of frame vectors
ASoC: rt5640: Correct the digital interface data select
ASoC: dapm: Make sure we have a card when displaying component widgets
ASoC: ssm4567: Reset device before regcache_sync()
ASoC: s3c24xx: use const snd_soc_component_driver pointer
EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback
toshiba_acpi: Fix regression caused by hotkey enabling value
i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared
i2c: cpm: Fix build break due to incompatible pointer types
perf intel-pt: Fix segfault tracing transactions
drm/i915: Use fw_domains_put_with_fifo() on HSW
drm/i915: Fixup the free space logic in ring_prepare
drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()
drm/i915: skl_update_scaler() wants a rotation bitmask instead of bit number
drm/i915: Cleanup phys status page too
pwm: brcmstb: Fix check of devm_ioremap_resource() return code
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
drm/dp/mst: Restore primary hub guid on resume
drm/dp/mst: Validate port in drm_dp_payload_send_msg()
drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries
drm: Loongson-3 doesn't fully support wc memory
drm/radeon: fix vertical bars appear on monitor (v2)
drm/radeon: forbid mapping of userptr bo through radeon device file
drm/radeon: fix initial connector audio value
drm/radeon: add a quirk for a XFX R9 270X
drm/amdgpu: fix regression on CIK (v2)
amdgpu/uvd: add uvd fw version for amdgpu
drm/amdgpu: bump the afmt limit for CZ, ST, Polaris
drm/amdgpu: use defines for CRTCs and AMFT blocks
drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work.
iommu/dma: Restore scatterlist offsets correctly
iommu/amd: Fix checking of pci dma aliases
pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce
xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay
Input: gtco - fix crash on detecting device without endpoints
netlink: don't send NETLINK_URELEASE for unbound sockets
nl80211: check netlink protocol in socket release notification
powerpc: Update TM user feature bits in scan_features()
powerpc: Update cpu_user_features2 in scan_features()
powerpc: scan_features() updates incorrect bits for REAL_LE
crypto: talitos - fix AEAD tcrypt tests
crypto: talitos - fix crash in talitos_cra_init()
crypto: sha1-mb - use corrcet pointer while completing jobs
crypto: ccp - Prevent information leakage on export
iwlwifi: mvm: fix memory leak in paging
iwlwifi: pcie: lower the debug level for RSA semaphore access
s390/pci: add extra padding to function measurement block
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control"
drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
drm/qxl: fix cursor position with non-zero hotspot
drm/nouveau/core: use vzalloc for allocating ramht
futex: Acknowledge a new waiter in counter before plist
futex: Handle unlock_pi race gracefully
asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic()
ALSA: hda - Add dock support for ThinkPad X260
ALSA: pcxhr: Fix missing mutex unlock
ALSA: hda - add PCI ID for Intel Broxton-T
ALSA: hda - Keep powering up ADCs on Cirrus codecs
ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m
ALSA: hda - Don't trust the reported actual power state
x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel address
x86/mm/xen: Suppress hugetlbfs in PV guests
arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission
arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings
sched/cgroup: Fix/cleanup cgroup teardown/init
dmaengine: pxa_dma: fix the maximum requestor line
dmaengine: hsu: correct use of channel status register
dmaengine: dw: fix master selection
debugfs: Make automount point inodes permanently empty
lib: lz4: fixed zram with lz4 on big endian machines
dm cache metadata: fix cmd_read_lock() acquiring write lock
dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros
usb: gadget: f_fs: Fix use-after-free
usb: hcd: out of bounds access in for_each_companion
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
assoc_array: don't call compare_object() on a node
ARM: OMAP2+: hwmod: Fix updating of sysconfig register
ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
ARM: mvebu: Correct unit address for linksys
ARM: dts: AM43x-epos: Fix clk parent for synctimer
KVM: arm/arm64: Handle forward time correction gracefully
kvm: x86: do not leak guest xcr0 into host interrupt handlers
x86/mce: Avoid using object after free in genpool
block: loop: fix filesystem corruption in case of aio/dio
block: partition: initialize percpuref before sending out KOBJ_ADD
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/cputype.h
arch/arm64/include/asm/hardirq.h
arch/arm64/include/asm/irq.h
arch/arm64/kernel/cpu_errata.c
arch/arm64/kernel/cpuinfo.c
arch/arm64/kernel/setup.c
arch/arm64/kernel/smp.c
arch/arm64/kernel/stacktrace.c
arch/arm64/mm/init.c
arch/arm64/mm/mmu.c
arch/arm64/mm/pageattr.c
mm/memcontrol.c
CRs-Fixed: 1054234
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Change-Id: I2a7a34631ffee36ce18b9171f16d023be777392f
In some cases the userspace can do a back to back write() followed by
close(). In such cases the tty framework does account for this by asking
the driver the status of the tx buffer and if not empty wait for a timeout
computed as a function of the current port baud rate.
However in some cases, this timeout doesn't seem sufficient, so when
checking the state of the tx buffer insert an extra delay if not empty
before returning to the framework. This will do a double wait at driver
and at framework, but this shouldn't adversely affect timing of usecases
and the flip side of having a pending byte in the tx buffer can result
in the peer hardware being left in a bad state.
Change-Id: I372e2e1c68f13f5d537ea33980eb63487f31d589
CRs-Fixed: 1044170
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
The msm_stop_dma() is not exported from the driver, so make
it static to stop the following warning:
drivers/tty/serial/msm_serial.c:84:6: warning: symbol 'msm_stop_dma' was not declared. Should it be static?
CRs-Fixed: 1053499
Change-Id: Icea65c8df570eb4d8cb22a421b89fa03dc33f659
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 9a3f5bf275e68b6651a2bc935beaac938cf27adc
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
For dm uarts in pio mode tx data is transferred to the fifo register 4
bytes at a time, but care is not taken when these 4 bytes spans the end
of the xmit buffer so the loop might read up to 3 bytes past the buffer
and then skip the actual data at the beginning of the buffer.
Fix this by, analogous to the DMA case, make sure the chunk doesn't
wrap the xmit buffer.
CRs-Fixed: 1053499
Change-Id: Ia6127c3a18e8909171c4b24c633e361245d1ed72
Fixes: 3a878c430f ("tty: serial: msm: Add TX DMA support")
Cc: Ivan Ivanov <iivanov.xz@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: Frank Rowand <frowand.list@gmail.com>
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Frank Rowand <frank.rowand@am.sony.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 30acf549ca1e81859a67590ab9ecfce3d1050a0b
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Avoid data corruption issues that result in CRC errors during file
transfers over serial ports at higher baud rates.
The current msm_serial driver masks the FIFO Rx interrupts in
msm_start_rx_dma() since Rx FIFO interrupts are not required in DMA
mode. However, msm_complete_rx_dma() re-enables the Rx FIFO interrupts
which could cause RXSTALE event to be processed when a TXLEV interrupt
occurs.
The following is the sequence of events that could occur resulting in
data corruption.
msm_start_rx_dma -> msm_complete_rx_dma -->
spin_unlock_irqrestore(&port->lock) -->
msm_uart_irq()(For TXLEV interrupt) --> msm_handle_rx_dm() (Read from
FIFO resulting in data corruption)
The patch fixes the issue by not restoring the RXLEV and RXSTALE
interrupts in msm_complete_rx_dma(). These interrupts are required only
in FIFO mode.
CRs-Fixed: 1053499
Change-Id: Ib05d8a73a516d7591868c87fd60ff227835d8609
Signed-off-by: Charanya Venkatraman <charanya@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 002eb41f303e007011aecba25ea6de25a4ed475f
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
The hrtimer include isn't used and neither is serial. Drop those
ones. The irq.h header really should be interrupt.h because this
is an interrupt user and not an interrupt chip. Finally add
wait.h for the wake_up*() usage in this driver and kernel.h for
container_of().
CRs-Fixed: 1053499
Change-Id: Ib6da8e064171dffe5a8652e49a51c9b7bed96170
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: e4276ff8a08116f22589b4f52974cf82cd3207db
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
The registers that msm_serial_set_mnd_regs() writes only exist on
the non-uartdm hardware, so let's return early here if this
function is called on uartdm hardware. This also prevents us from
messing up the uartclk variable if the uartclk rate happens to be
19.2 or 4.8 MHz.
CRs-Fixed: 1053499
Change-Id: I0a336cc928bbff5bba253281ff7deca52414ba9d
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 2a31f094553125e0353b9f7e7b6e9aeea752fed3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
This header file is only used by the driver, so let's merge the
two together to reduce files and make it easier to see the whole
driver without flipping through two files. This also makes it
easier to use the structures defined in msm_serial.c in the
functions that are defined in msm_serial.h by placing them in the
proper locations.
CRs-Fixed: 1053499
Change-Id: I1c54b6ab1c27c9b1a7601f809184d27b78ac6e8b
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 321737416c72dc3d3dd8753c3684c6eb86d0ea6c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
The msm_find_best_baud() function is written with the assumption
that the port->uartclk rate is fixed to a particular rate at boot
time, but now this driver changes that clk rate at runtime when
the baud is changed.
The way the hardware works is that an input clk rate comes from
the clk controller into the uart hw block. That rate is typically
1843200 or 3686400 Hz. That rate can then be divided by an
internal divider in the hw block to achieve a particular baud on
the serial wire. msm_find_best_baud() is looking for that divider
value.
A few things are wrong with the way the code is written. First,
it assumes that the maximum baud that the uart can support if the
clk rate is fixed at boot is 460800, which would correspond to an
input clk rate of 230400 * 16 == 3686400 Hz. Except some devices
have a boot rate of 1843200 Hz or max baud of 115200, so
achieving 230400 on those devices doesn't work at all because we
don't increase the clk rate unless max baud is 460800.
Second, we can't achieve bauds higher than 460800 that require
anything besides a divisor of 1, because we always call
msm_find_best_baud() with a fixed port->uartclk rate that will
eventually be changed after we calculate the divisor. So if we
need to get a baud of 500000, we'll just multiply that by 16 and
hope that the clk can give us 500000 * 16 == 8000000 Hz, which it
typically can't do. To really achieve 500000 baud, we need to get
an input clk rate of 24000000 Hz and then divide that by 3 inside
the uart hardware.
Finally, we return success for bauds even when we can't actually
achieve them. This means that when the user asks for 500000 baud,
we actually get 921600 right now, but the user doesn't know that.
Fix all of this by searching through the divisor and clk rate
space with a combination of clk_round_rate() and baud
calculations, keeping track of the best clk rate and divisor we
find if we can't get an exact match. Typically we can get an
exact match with a divisor of 1, but sometimes we need to keep
track and try more frequencies. On my msm8916 device, this
results in all standard bauds in baud_table being supported
except for 1800, 576000, 1152000, and 4000000.
CRs-Fixed: 1053499
Change-Id: Ic480a989bb65b1924f3bd6d38927d1fe54eaaeee
Fixes: 850b37a71b ("tty: serial: msm: Remove 115.2 Kbps maximum baud rate limitation")
Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com>
Cc: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Cristian Prundeanu <cprundea@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 98952bf510d0c7cdfc284f098bbf4682dc47bc61
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
The issue with setting up a fixed clock rate at probe is that it would
overwrite the console rate set by the bootloader for its console device.
This would result in serial out corruption or missing log when we system
is booted with earlycon. This is not a issue if we boot system without
earlycon.
This setup is at least not required with the mainline driver, this code
used to be required because the clk_enable() call would fail if
clk_set_rate() wasn't called first.
Originally the issue was noticed on DB410c which is based on APQ8016
chipset.
Without this patch the console log with earlycon would look like:
...
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
����+HH��0.699378] console [ttyMSM0] enabled
[ 0.699378] console [ttyMSM0] enabled
[ 0.702003] bootconsole [uart0] disabled
[ 0.702003] bootconsole [uart0] disabled
...
with this patch I can see all the skipped lines on the console
CRs-Fixed: 1053499
Change-Id: I029ac3c7a20fdce9b5dfd0bbde8a049ff47dc4bd
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Pramod Gurav <gpramod@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 79c9473f115f99906b6ae443708b8ece480e2e88
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Use a single common table of struct earlycon_id for both command line
and devicetree. Re-define OF_EARLYCON_DECLARE() macro to instance a
unique earlycon declaration (the declaration is only guaranteed to be
unique within a compilation unit; separate compilation units must still
use unique earlycon names).
The semantics of OF_EARLYCON_DECLARE() is different; it declares an
earlycon which can matched either on the command line or by devicetree.
EARLYCON_DECLARE() is semantically unchanged; it declares an earlycon
which is matched by command line only. Remove redundant instances of
EARLYCON_DECLARE().
This enables all earlycons to properly initialize struct console
with the appropriate name and index, which improves diagnostics and
enables direct earlycon-to-console handoff.
CRs-Fixed: 1053499
Change-Id: I893ebd28a3e4e7afe8080bcc3e000970fe1fa36b
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 2eaa790989e03900298ad24f77f1086dbbc1aebd
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
Change the default IPC logging messages to help log analysis instead of
having to change log mask levels and having to re-run the test cases.
Currently single log is used to gather all the driver messages. Split
these into dedicated tx/rx payload log, client ioctl/power state log and
generic driver state log.
Also only dump 32 bytes of the tx/rx payload.
Change-Id: I8dee2f8aa0a6882ec1c320669f165e7cb94bb5f1
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Don't modify the ref count variable clk count inside the runtime callbacks.
Doing so could result in a case where the driver might end up calling a put
twice on the runtime object. The resulting imbalance will leave the runtime
state for the device in a bad state.
Change-Id: I34989768811b23762c4afe3e33e229ffa3f1db17
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
As part of the resource voting, both the resource_vote and unvote
functions call the toggle_wakeup_interrupt() function which toggles the
state of the wakeup irq unconditionally. This can cause issues in adverse
scenarios. Instead split this out into exclusive enable and disable wakeup
interrupt functions to be called during the resource unvote and vote
respectively. Also don't make resource votes in the wakeup isr, the
wakeup isr injects a pre-determined byte into the tty flip buffer and
doesn't access the core or setup any transactions and hence doesn't need
to vote for resources.
The driver has registered for the noirq system suspend/resume callbacks.
When executing these callbacks, don't rely on the runtime framework to
check the device's current runtime state before deciding whether to allow
system suspend or not as the runtime framework is disabled at this point.
Instead rely on the power state that the driver maintains internally.
Change-Id: I0e5d6b8a8a69efc2d9c65dc1edc85f13cbc94fc3
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
* msm-4.4/tmp-2bf7955:
Linux 4.4.8
Revert "usb: hub: do not clear BOS field during reset device"
usbvision: fix crash on detecting device with invalid configuration
staging: android: ion: Set the length of the DMA sg entries in buffer
Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"
Revert "PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed"
Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"
HID: usbhid: fix inconsistent reset/resume/reset-resume behavior
HID: wacom: fix Bamboo ONE oops
ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock
ALSA: usb-audio: Add a quirk for Plantronics BT300
ALSA: usb-audio: Add a sample rate quirk for Phoenix Audio TMX320
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T460s
ALSA: hda - fix front mic problem for a HP desktop
ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
perf: Cure event->pending_disable race
perf: Do not double free
arm64: replace read_lock to rcu lock in call_step_hook
Btrfs: fix file/data loss caused by fsync after rename and new inode
iommu: Don't overwrite domain pointer when there is no default_domain
ext4: ignore quota mount options if the quota feature is enabled
ext4: add lockdep annotations for i_data_sem
btrfs: fix crash/invalid memory access on fsync when using overlayfs
nfs: use file_dentry()
fs: add file_dentry()
sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes
iio: gyro: bmg160: fix endianness when reading axes
iio: gyro: bmg160: fix buffer read values
iio: accel: bmc150: fix endianness when reading axes
iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE
usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()
usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()
mac80211: fix txq queue related crashes
mac80211: fix unnecessary frame drops in mesh fwding
mac80211: fix ibss scan parameters
mac80211: avoid excessive stack usage in sta_info
mac80211: properly deal with station hashtable insert errors
virtio: virtio 1.0 cs04 spec compliance for reset
rbd: use GFP_NOIO consistently for request allocations
pcmcia: db1xxx_ss: fix last irq_to_gpio user
v4l: vsp1: Set the SRU CTRL0 register when starting the stream
coda: fix error path in case of missing pdata on non-DT platform
au0828: Fix dev_state handling
au0828: fix au0828_v4l2_close() dev_state race condition
pinctrl: freescale: imx: fix bogus check of of_iomap() return value
pinctrl: nomadik: fix pull debug print inversion
pinctrl: sunxi: Fix A33 external interrupts not working
pinctrl: sh-pfc: only use dummy states for non-DT platforms
pinctrl: pistachio: fix mfio84-89 function description and pinmux.
MIPS: Fix MSA ld unaligned failure cases
KVM: x86: reduce default value of halt_poll_ns parameter
KVM: x86: Inject pending interrupt even if pending nmi exist
cdc-acm: fix NULL pointer reference
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
mpls: find_outdev: check for err ptr in addition to NULL check
ipv6: Count in extension headers in skb->network_header
ip6_tunnel: set rtnl_link_ops before calling register_netdevice
ipv6: l2tp: fix a potential issue in l2tp_ip6_recv
ipv4: l2tp: fix a potential issue in l2tp_ip_recv
tuntap: restore default qdisc
tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter
rtnl: fix msg size calculation in if_nlmsg_size()
bridge: Allow set bridge ageing time when switchdev disabled
ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates
qmi_wwan: add "D-Link DWM-221 B1" device id
xfrm: Fix crash observed during device unregistration and decryption
ppp: take reference on channels netns
ipv4: initialize flowi4_flags before calling fib_lookup()
ipv4: fix broadcast packets reception
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
qlge: Fix receive packets drop.
tcp/dccp: remove obsolete WARN_ON() in icmp handlers
ppp: ensure file->private_data can't be overridden
ath9k: fix buffer overrun for ar9287
farsync: fix off-by-one bug in fst_add_one
mlx4: add missing braces in verify_qp_parameters
net: Fix use after free in the recvmmsg exit path
ipv4: Don't do expensive useless work during inetdev destroy.
bridge: allow zero ageing time
rocker: set FDB cleanup timer according to lowest ageing time
mlxsw: spectrum: Check requested ageing time is valid
macvtap: always pass ethernet header in linear
qlcnic: Fix mailbox completion handling during spurious interrupt
qlcnic: Remove unnecessary usage of atomic_t
sh_eth: advance 'rxdesc' later in sh_eth_ring_format()
sh_eth: fix NULL pointer dereference in sh_eth_ring_format()
bpf: avoid copying junk bytes in bpf_get_current_comm()
packet: validate variable length ll headers
ax25: add link layer header validation function
net: validate variable length ll headers
ppp: release rtnl mutex when interface creation fails
tcp: fix tcpi_segs_in after connection establishment
udp6: fix UDP/IPv6 encap resubmit path
usbnet: cleanup after bind() in probe()
cdc_ncm: toggle altsetting to force reset before setup
vxlan: fix missing options_len update on RX with collect metadata
ipv6: re-enable fragment header matching in ipv6_find_hdr
qmi_wwan: add Sierra Wireless EM74xx device ID
tipc: Revert "tipc: use existing sk_write_queue for outgoing packet chain"
mld, igmp: Fix reserved tailroom calculation
sctp: lack the check for ports in sctp_v6_cmp_addr
net: fix bridge multicast packet checksum validation
net: qca_spi: clear IFF_TX_SKB_SHARING
net: qca_spi: Don't clear IFF_BROADCAST
net: vrf: Remove direct access to skb->data
net: jme: fix suspend/resume on JMC260
ipv4: only create late gso-skb if skb is already set up with CHECKSUM_PARTIAL
tunnel: Clear IPCB(skb)->opt before dst_link_failure called
tcp: convert cached rtt from usec to jiffies when feeding initial rto
xen/events: Mask a moving irq
drm/amdgpu/gmc: use proper register for vram type on Fiji
drm/amdgpu/gmc: move vram type fetching into sw_init
drm/radeon: add a dpm quirk for all R7 370 parts
drm/radeon: add another R7 370 quirk
drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5
drm/udl: Use unlocked gem unreferencing
drm/dp: move hw_mutex up the call stack
arm64: opcodes.h: Add arm big-endian config options before including arm header
compiler-gcc: disable -ftracer for __noclone functions
libnvdimm, pfn: fix uuid validation
libnvdimm: fix smart data retrieval
powerpc/mm: Fixup preempt underflow with huge pages
mm: fix invalid node in alloc_migrate_target()
ALSA: hda - Apply fix for white noise on Asus N550JV, too
ALSA: hda - Fix white noise on Asus N750JV headphone
ALSA: hda - Asus N750JV external subwoofer fixup
ALSA: timer: Use mod_timer() for rearming the system timer
parisc: Unbreak handling exceptions from kernel modules
parisc: Fix kernel crash with reversed copy_from_user()
parisc: Avoid function pointers for kernel exception routines
PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated
Linux 4.4.7
perf/x86/intel: Fix PEBS data source interpretation on Nehalem/Westmere
perf/x86/intel: Use PAGE_SIZE for PEBS buffer size on Core2
perf/x86/intel: Fix PEBS warning by only restoring active PMU in pmi
perf/x86/pebs: Add workaround for broken OVFL status on HSW+
sched/cputime: Fix steal time accounting vs. CPU hotplug
scsi_common: do not clobber fixed sense information
PM / sleep: Clear pm_suspend_global_flags upon hibernate
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
mtd: onenand: fix deadlock in onenand_block_markbad
mm/page_alloc: prevent merging between isolated and other pageblocks
ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list
ocfs2/dlm: fix race between convert and recovery
Input: ati_remote2 - fix crashes on detecting device with invalid descriptor
Input: ims-pcu - sanity check against missing interfaces
Input: synaptics - handle spurious release of trackstick buttons, again
writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
ACPI / PM: Runtime resume devices when waking from hibernate
ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
nfsd: fix deadlock secinfo+readdir compound
nfsd4: fix bad bounds checking
iser-target: Rework connection termination
iser-target: Separate flows for np listeners and connections cma events
iser-target: Add new state ISER_CONN_BOUND to isert_conn
iser-target: Fix identification of login rx descriptor type
target: Fix target_release_cmd_kref shutdown comp leak
clk: bcm2835: Fix setting of PLL divider clock rates
clk: rockchip: add hclk_cpubus to the list of rk3188 critical clocks
clk: rockchip: rk3368: fix hdmi_cec gate-register
clk: rockchip: rk3368: fix parents of video encoder/decoder
clk: rockchip: rk3368: fix cpuclk core dividers
clk: rockchip: rk3368: fix cpuclk mux bit of big cpu-cluster
mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout
mmc: sdhci: fix data timeout (part 2)
mmc: sdhci: fix data timeout (part 1)
mmc: mmc_spi: Add Card Detect comments and fix CD GPIO case
mmc: block: fix ABI regression of mmc_blk_ioctl
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
MAINTAINERS: Update mailing list and web page for hwmon subsystem
kbuild/mkspec: fix grub2 installkernel issue
scripts/kconfig: allow building with make 3.80 again
scripts/coccinelle: modernize &
bitops: Do not default to __clear_bit() for __clear_bit_unlock()
tracing: Fix trace_printk() to print when not using bprintk()
tracing: Fix crash from reading trace_pipe with sendfile
tracing: Have preempt(irqs)off trace preempt disabled functions
IB/ipoib: fix for rare multicast join race condition
drm/amdgpu: include the right version of gmc header files for iceland
drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
drm/radeon: disable runtime pm on PX laptops without dGPU power control
iwlwifi: mvm: Fix paging memory leak
ipr: Fix regression when loading firmware
ipr: Fix out-of-bounds null overwrite
rapidio/rionet: fix deadlock on SMP
fs/coredump: prevent fsuid=0 dumps into user-controlled directories
fuse: Add reference counting for fuse_io_priv
fuse: do not use iocb after it may have been freed
md: multipath: don't hardcopy bio in .make_request path
md/raid5: preserve STRIPE_PREREAD_ACTIVE in break_stripe_batch_list
raid10: include bio_end_io_list in nr_queued to prevent freeze_array hang
RAID5: revert e9e4c377e2 to fix a livelock
RAID5: check_reshape() shouldn't call mddev_suspend
md/raid5: Compare apples to apples (or sectors to sectors)
raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang
xfs: fix two memory leaks in xfs_attr_list.c error paths
quota: Fix possible GPF due to uninitialised pointers
ARC: bitops: Remove non relevant comments
ARC: [BE] readl()/writel() to work in Big Endian CPU configuration
xtensa: clear all DBREAKC registers on start
xtensa: fix preemption in {clear,copy}_user_highpage
xtensa: ISS: don't hang if stdin EOF is reached
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
of: alloc anywhere from memblock if range not specified
net: mvneta: enable change MAC address when interface is up
cgroup: ignore css_sets associated with dead cgroups during migration
Bluetooth: Fix potential buffer overflow with Add Advertising
Bluetooth: Add new AR3012 ID 0489:e095
watchdog: rc32434_wdt: fix ioctl error handling
watchdog: don't run proc_watchdog_update if new value is same as old
ia64: define ioremap_uc()
mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage
mm: memcontrol: reclaim when shrinking memory.high below usage
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: fix race of writeback thread starting before complete initialization
bcache: cleaned up error handling around register_cache()
IB/srpt: Simplify srpt_handle_tsk_mgmt()
brd: Fix discard request processing
jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path
tools/hv: Use include/uapi with __EXPORTED_HEADERS__
ALSA: hda - Fix unconditional GPIO toggle via automute
ALSA: hda - fix the mic mute button and led problem for a Lenovo AIO
ALSA: hda - Don't handle ELD notify from invalid port
ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41.
ALSA: pcm: Avoid "BUG:" string for warnings again
ALSA: hda - Apply reboot D3 fix for CX20724 codec, too
mtip32xx: Cleanup queued requests after surprise removal
mtip32xx: Implement timeout handler
mtip32xx: Handle FTL rebuild failure state during device initialization
mtip32xx: Handle safe removal during IO
mtip32xx: Fix for rmmod crash when drive is in FTL rebuild
mtip32xx: Print exact time when an internal command is interrupted
mtip32xx: Remove unwanted code from taskfile error handler
mtip32xx: Fix broken service thread handling
mtip32xx: Avoid issuing standby immediate cmd during FTL rebuild
media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32
coda: fix first encoded frame payload
bttv: Width must be a multiple of 16 when capturing planar formats
adv7511: TX_EDID_PRESENT is still 1 after a disconnect
saa7134: Fix bytesperline not being set correctly for planar formats
8250: use callbacks to access UART_DLL/UART_DLM
net: irda: Fix use-after-free in irtty_open()
tty: Fix GPF in flush_to_ldisc(), part 2
staging: comedi: ni_mio_common: fix the ni_write[blw]() functions
staging: android: ion_test: fix check of platform_device_register_simple() error code
staging: comedi: ni_tiocmd: change mistaken use of start_src for start_arg
HID: fix hid_ignore_special_drivers module parameter
HID: multitouch: force retrieving of Win8 signature blob
HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report()
HID: logitech: fix Dual Action gamepad support
tpm: fix the cleanup of struct tpm_chip
tpm_eventlog.c: fix binary_bios_measurements
tpm_crb: tpm2_shutdown() must be called before tpm_chip_unregister()
tpm: fix the rollback in tpm_chip_register()
mei: bus: check if the device is enabled before data transfer
X.509: Fix leap year handling again
crypto: marvell/cesa - forward devm_ioremap_resource() error code
crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
crypto: keywrap - memzero the correct memory
crypto: ccp - memset request context to zero during import
crypto: ccp - Don't assume export/import areas are aligned
crypto: ccp - Limit the amount of information exported
crypto: ccp - Add hash state import and export support
Bluetooth: btusb: Add a new AR3012 ID 13d3:3472
Bluetooth: btusb: Add a new AR3012 ID 04ca:3014
Bluetooth: btusb: Add new AR3012 ID 13d3:3395
ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call
ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()
ALSA: usb-audio: add Microsoft HD-5001 to quirks
ALSA: usb-audio: Add sanity checks for endpoint accesses
ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk()
Input: powermate - fix oops with malicious USB descriptors
pwc: Add USB id for Philips Spc880nc webcam
USB: option: add "D-Link DWM-221 B1" device id
USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices
USB: serial: cp210x: Adding GE Healthcare Device ID
USB: cypress_m8: add endpoint sanity check
USB: digi_acceleport: do sanity checking for the number of ports
USB: mct_u232: add sanity checking in probe
USB: usb_driver_claim_interface: add sanity checking
USB: iowarrior: fix oops with malicious USB descriptors
USB: cdc-acm: more sanity checking
USB: uas: Reduce can_queue to MAX_CMNDS
usb: hub: fix a typo in hub_port_init() leading to wrong logic
usb: retry reset if a device times out
dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
dm cache: make sure every metadata function checks fail_io
dm thin metadata: don't issue prefetches if a transaction abort has failed
dm: fix excessive dm-mq context switching
dm snapshot: disallow the COW and origin devices from being identical
libnvdimm: Fix security issue with DSM IOCTL.
aic7xxx: Fix queue depth handling
be2iscsi: set the boot_kset pointer to NULL in case of failure
scsi: storvsc: fix SRB_STATUS_ABORTED handling
sd: Fix discard granularity when LBPRZ=1
aacraid: Set correct msix count for EEH recovery
aacraid: Fix memory leak in aac_fib_map_free
aacraid: Fix RRQ overload
sg: fix dxferp in from_to case
x86/mm: TLB_REMOTE_SEND_IPI should count pages
x86/iopl: Fix iopl capability check on Xen PV
x86/iopl/64: Properly context-switch IOPL on Xen PV
x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()
x86/irq: Cure live lock in fixup_irqs()
PCI: ACPI: IA64: fix IO port generic range check
PCI: Disable IO/MEM decoding for devices with non-compliant BARs
pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
s390/pci: enforce fmb page boundary rule
s390/cpumf: add missing lpp magic initialization
s390: fix floating pointer register corruption (again)
EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()
EDAC/sb_edac: Fix computation of channel address
sched/preempt, sh: kmap_coherent relies on disabled preemption
sched/cputime: Fix steal_account_process_tick() to always return jiffies
Thermal: Ignore invalid trip points
perf tools: Fix python extension build
perf tools: Fix checking asprintf return value
perf tools: Dont stop PMU parsing on alias parse error
perf/core: Fix perf_sched_count derailment
KVM: VMX: fix nested vpid for old KVM guests
KVM: VMX: avoid guest hang on invalid invvpid instruction
KVM: VMX: avoid guest hang on invalid invept instruction
KVM: fix spin_lock_init order on x86
KVM: i8254: change PIT discard tick policy
KVM: x86: fix missed hardware breakpoints
x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs
perf/x86/intel: Add definition for PT PMI bit
x86/entry/compat: Keep TS_COMPAT set during signal delivery
x86/microcode: Untangle from BLK_DEV_INITRD
x86/microcode/intel: Make early loader look for builtin microcode too
mmc: sh_mmcif: Correct TX DMA channel allocation
mmc: sh_mmcif: rework dma channel handling
ASoC: samsung: pass DMA channels as pointers
regulator: core: Fix nested locking of supplies
regulator: core: avoid unused variable warning
s390/cpumf: Fix lpp detection
cpufreq: dt: No need to allocate resources anymore
cpufreq: dt: No need to fetch voltage-tolerance
cpufreq: dt: Use dev_pm_opp_set_rate() to switch frequency
cpufreq: dt: Reuse dev_pm_opp_get_max_transition_latency()
cpufreq: dt: Unsupported OPPs are already disabled
cpufreq: dt: Pass regulator name to the OPP core
cpufreq: dt: OPP layers handles clock-latency for V1 bindings as well
cpufreq: dt: Rename 'need_update' to 'opp_v1'
cpufreq: dt: Convert few pr_debug/err() calls to dev_dbg/err()
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq-dt: Supply power coefficient when registering cooling devices
PM / OPP: Rename structures for clarity
PM / OPP: Fix incorrect comments
PM / OPP: Initialize regulator pointer to an error value
PM / OPP: Initialize u_volt_min/max to a valid value
PM / OPP: Fix NULL pointer dereference crash when disabling OPPs
PM / OPP: Add dev_pm_opp_set_rate()
PM / OPP: Manage device clk
PM / OPP: Parse clock-latency and voltage-tolerance for v1 bindings
PM / OPP: Introduce dev_pm_opp_get_max_transition_latency()
PM / OPP: Introduce dev_pm_opp_get_max_volt_latency()
PM / OPP: Disable OPPs that aren't supported by the regulator
PM / OPP: get/put regulators from OPP core
cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
PM / OPP: Use snprintf() instead of sprintf()
PM / OPP: Set cpu_dev->id in cpumask first
PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
PM / OPP: Parse 'opp-<prop>-<name>' bindings
PM / OPP: Parse 'opp-supported-hw' binding
PM / OPP: Add missing doc comments
PM / OPP: Rename OPP nodes as opp@<opp-hz>
PM / OPP: Remove 'operating-points-names' binding
PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
PM / OPP: Add "opp-supported-hw" binding
PM / OPP: Add debugfs support
arm64: vdso: Mark vDSO code as read-only
Conflicts:
drivers/staging/android/ion/ion.c
mm/page_alloc.c
CRs-Fixed: 1010239
Change-Id: Id59539cad642885e1e41340cebae4159ba1f7eaf
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
RTB logs gets flooded during console write operation due to logged
variant of API. This commit replaces logged variant API with no log
variant to suppress logs.
CRs-Fixed: 1030352
Change-Id: I79f943cbc13553b3dbdce68f5c1143fa54f6eafa
Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@codeaurora.org>
commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream.
The BSP team noticed that there is spin/mutex lock issue on sh-sci when
CPUFREQ is used. The issue is that the notifier function may call
mutex_lock() while the spinlock is held, which can lead to a BUG().
This may happen if CPUFREQ is changed while another CPU calls
clk_get_rate().
Taking the spinlock was added to the notifier function in commit
e552de2413 ("sh-sci: add platform device private data"), to
protect the list of serial ports against modification during traversal.
At that time the Common Clock Framework didn't exist yet, and
clk_get_rate() just returned clk->rate without taking a mutex.
Note that since commit d535a2305f ("serial: sh-sci: Require a
device per port mapping."), there's no longer a list of serial ports to
traverse, and taking the spinlock became superfluous.
To fix the issue, just remove the cpufreq notifier:
1. The notifier doesn't work correctly: all it does is update stored
clock rates; it does not update the divider in the hardware.
The divider will only be updated when calling sci_set_termios().
I believe this was broken back in 2004, when the old
drivers/char/sh-sci.c driver (where the notifier did update the
divider) was replaced by drivers/serial/sh-sci.c (where the
notifier just updated port->uartclk).
Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port
sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH]
Remove old sh-sci driver").
2. On modern SoCs, the sh-sci parent clock rate is no longer related
to the CPU clock rate anyway, so using a cpufreq notifier is
futile.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
msm_write/read use write/read_relaxed function which will create
lots of RTB logging. Change the API to no_log version to remove
those RTB logs.
CRs-Fixed: 1004316
Change-Id: Ica921ffe3dfc362b70e78232ee680b82c205a477
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
commit 0b41ce991052022c030fd868e03877700220b090 upstream.
Some UART HW has a single register combining UART_DLL/UART_DLM
(this was probably forgotten in the change that introduced the
callbacks, commit b32b19b8ff)
Fixes: b32b19b8ff ("[SERIAL] 8250: set divisor register correctly ...")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The __pm_stay_awake/relax() calls were moved to runtime callbacks as a
means to fix data loss due to race conditions between incoming userspace
commands and executing PM related callbacks.
However calling the __pm_relax (to notify wakeup event processing)
as part of the runtime suspend callback could be race prone between
the system suspend and the runtime framework. If the system suspend
gets to run before the runtime callback, the wakeup event will block
system suspend.
Remove the use of the wakeup source altogether, instead do these:
1. Block system suspend based on the current clk request count and the
RPM state of the device (to detect potential inbound userspace
requests).
2. If the driver is in the process of executing the system suspend
callback, ignore any userspace requests.
3. If the client calls a shutdown without an unvote ioctl, zero out
the client_count vote forcefully to allow suspend.
CRs-Fixed: 977421
Change-Id: I17de85f29b555c1a4563dd59bec3ba3084c3604f
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
In OBS, enable/disable UART IRQ during power management operations
to allow the device to enter low power modes.
Change-Id: I8479d6bc867c4ecb34adf83cd62b01f6fb60fef8
Signed-off-by: Naveen Kaje <nkaje@codeaurora.org>
* lsk-44/linux-linaro-lsk-v4.4:
Linux 4.4.3
modules: fix modparam async_probe request
module: wrapper for symbol name.
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
prctl: take mmap sem for writing to protect against others
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: inode recovery readahead can race with inode buffer creation
libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
futex: Drop refcount if requeue_pi() acquired the rtmutex
devm_memremap_release(): fix memremap'd addr handling
ipc/shm: handle removed segments gracefully in shm_mmap()
intel_scu_ipcutil: underflow in scu_reg_access()
mm,thp: khugepaged: call pte flush at the time of collapse
dump_stack: avoid potential deadlocks
radix-tree: fix oops after radix_tree_iter_retry
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
MAINTAINERS: return arch/sh to maintained state, with new maintainers
memcg: only free spare array when readers are done
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
fs/hugetlbfs/inode.c: fix bugs in hugetlb_vmtruncate_list()
scripts/bloat-o-meter: fix python3 syntax error
dma-debug: switch check from _text to _stext
m32r: fix m32104ut_defconfig build fail
xhci: Fix list corruption in urb dequeue at host removal
Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
iommu/vt-d: Clear PPR bit to ensure we get more page request interrupts
iommu/vt-d: Fix 64-bit accesses to 32-bit DMAR_GSTS_REG
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users
iommu/amd: Correct the wrong setting of alias DTE in do_attach
iommu/vt-d: Don't skip PCI devices when disabling IOTLB
Input: vmmouse - fix absolute device registration
string_helpers: fix precision loss for some inputs
Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
Input: elantech - mark protocols v2 and v3 as semi-mt
mm: fix regression in remap_file_pages() emulation
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
mm: fix mlock accouting
libnvdimm: fix namespace object confusion in is_uuid_busy()
mm: soft-offline: check return value in second __get_any_page() call
perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data
KVM: PPC: Fix ONE_REG AltiVec support
KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8
KVM: arm/arm64: Fix reference to uninitialised VGIC
arm64: dma-mapping: fix handling of devices registered before arch_initcall
ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
ARM: OMAP2+: Fix save_secure_ram_context for rodata
ARM: OMAP2+: Fix l2dis_3630 for rodata
ARM: OMAP2+: Fix l2_inv_api_params for rodata
ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
ARM: dts: at91: sama5d4: fix instance id of DBGU
ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
ARM: dts: omap5-board-common: enable rtc and charging of backup battery
ARM: dts: Fix omap5 PMIC control lines for RTC writes
ARM: dts: Fix wl12xx missing clocks that cause hangs
ARM: nomadik: fix up SD/MMC DT settings
ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
ARM: 8519/1: ICST: try other dividends than 1
arm64: mm: avoid calling apply_to_page_range on empty range
ARM: mvebu: remove duplicated regulator definition in Armada 388 GP
powerpc/ioda: Set "read" permission when "write" is set
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/eeh: Fix PE location code
SUNRPC: Fixup socket wait for memory
udf: Check output buffer length when converting name to CS0
udf: Prevent buffer overrun with multi-byte characters
udf: limit the maximum number of indirect extents in a row
pNFS/flexfiles: Fix an XDR encoding bug in layoutreturn
nfs: Fix race in __update_open_stateid()
pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
NFS: Fix attribute cache revalidation
cifs: fix erroneous return value
cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
cifs: fix race between call_async() and reconnect()
cifs: Ratelimit kernel log messages
iio: inkern: fix a NULL dereference on error
iio: pressure: mpl115: fix temperature offset sign
iio: light: acpi-als: Report data as processed
iio: dac: mcp4725: set iio name property in sysfs
iio: add IIO_TRIGGER dependency to STK8BA50
iio: add HAS_IOMEM dependency to VF610_ADC
iio-light: Use a signed return type for ltr501_match_samp_freq()
iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
iio: adis_buffer: Fix out-of-bounds memory access
scsi: fix soft lockup in scsi_remove_target() on module removal
SCSI: Add Marvell Console to VPD blacklist
scsi_dh_rdac: always retry MODE SELECT on command lock violation
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
SCSI: fix crashes in sd and sr runtime PM
iscsi-target: Fix potential dead-lock during node acl delete
scsi: add Synology to 1024 sector blacklist
klist: fix starting point removed bug in klist iterators
tracepoints: Do not trace when cpu is offline
tracing: Fix freak link error caused by branch tracer
perf tools: tracepoint_error() can receive e=NULL, robustify it
tools lib traceevent: Fix output of %llu for 64 bit values read on 32 bit machines
ptrace: use fsuid, fsgid, effective creds for fs access checks
Btrfs: fix direct IO requests not reporting IO error to user space
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
btrfs: properly set the termination value of ctx->pos in readdir
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
Btrfs: fix fitrim discarding device area reserved for boot loader's use
btrfs: handle invalid num_stripes in sys_array
ext4: don't read blocks from disk after extents being swapped
ext4: fix potential integer overflow
ext4: fix scheduling in atomic on group checksum failure
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
serial: 8250_pci: Add Intel Broadwell ports
tty: Add support for PCIe WCH382 2S multi-IO card
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
staging/speakup: Use tty_ldisc_ref() for paste kworker
phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
phy: twl4030-usb: Relase usb phy on unload
ALSA: seq: Fix double port list deletion
ALSA: seq: Fix leak of pool buffer at concurrent writes
ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream
ALSA: hda - Cancel probe work instead of flush at remove
x86/mm: Fix vmalloc_fault() to handle large pages properly
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
x86/mm/pat: Avoid truncation when converting cpa->numpages to address
x86/mm: Fix types used in pgprot cacheability flags translations
Linux 4.4.2
HID: multitouch: fix input mode switching on some Elan panels
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
zsmalloc: fix migrate_zspage-zs_free race condition
zram: don't call idr_remove() from zram_remove()
zram: try vmalloc() after kmalloc()
zram/zcomp: use GFP_NOIO to allocate streams
rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded
rtlwifi: rtl8821ae: Fix errors in parameter initialization
crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init()
crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts
crypto: atmel-sha - fix atmel_sha_remove()
crypto: algif_skcipher - Do not set MAY_BACKLOG on the async path
crypto: algif_skcipher - Do not dereference ctx without socket lock
crypto: algif_skcipher - Do not assume that req is unchanged
crypto: user - lock crypto_alg_list on alg dump
EVM: Use crypto_memneq() for digest comparisons
crypto: algif_hash - wait for crypto_ahash_init() to complete
crypto: shash - Fix has_key setting
crypto: chacha20-ssse3 - Align stack pointer to 64 bytes
crypto: caam - make write transactions bufferable on PPC platforms
crypto: algif_skcipher - sendmsg SG marking is off by one
crypto: algif_skcipher - Load TX SG list after waiting
crypto: crc32c - Fix crc32c soft dependency
crypto: algif_skcipher - Fix race condition in skcipher_check_key
crypto: algif_hash - Fix race condition in hash_check_key
crypto: af_alg - Forbid bind(2) when nokey child sockets are present
crypto: algif_skcipher - Remove custom release parent function
crypto: algif_hash - Remove custom release parent function
crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
ahci: Intel DNV device IDs SATA
libata: disable forced PORTS_IMPL for >= AHCI 1.3
crypto: algif_skcipher - Add key check exception for cipher_null
crypto: skcipher - Add crypto_skcipher_has_setkey
crypto: algif_hash - Require setkey before accept(2)
crypto: hash - Add crypto_ahash_has_setkey
crypto: algif_skcipher - Add nokey compatibility path
crypto: af_alg - Add nokey compatibility path
crypto: af_alg - Fix socket double-free when accept fails
crypto: af_alg - Disallow bind/setkey/... after accept(2)
crypto: algif_skcipher - Require setkey before accept(2)
sched: Fix crash in sched_init_numa()
ext4 crypto: add missing locking for keyring_key access
iommu/io-pgtable-arm: Ensure we free the final level on teardown
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
n_tty: Fix unsafe reference to "other" ldisc
usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
usb: xhci: handle both SSIC ports in PME stuck quirk
usb: phy: msm: fix error handling in probe.
usb: cdc-acm: send zero packet for intel 7260 modem
usb: cdc-acm: handle unlinked urb in acm read callback
USB: option: fix Cinterion AHxx enumeration
USB: serial: option: Adding support for Telit LE922
USB: cp210x: add ID for IAI USB to RS485 adaptor
USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
usb: hub: do not clear BOS field during reset device
USB: visor: fix null-deref at probe
USB: serial: visor: fix crash on detecting device without write_urbs
ASoC: rt5645: fix the shift bit of IN1 boost
saa7134-alsa: Only frees registered sound cards
ALSA: dummy: Implement timer backend switching more safely
ALSA: hda - Fix bad dereference of jack object
ALSA: hda - Fix speaker output from VAIO AiO machines
Revert "ALSA: hda - Fix noise on Gigabyte Z170X mobo"
ALSA: hda - Fix static checker warning in patch_hdmi.c
ALSA: hda - Add fixup for Mac Mini 7,1 model
ALSA: timer: Fix race between stop and interrupt
ALSA: timer: Fix wrong instance passed to slave callbacks
ALSA: timer: Fix race at concurrent reads
ALSA: timer: Fix link corruption due to double start or stop
ALSA: timer: Fix leftover link at closing
ALSA: timer: Code cleanup
ALSA: seq: Fix lockdep warnings due to double mutex locks
ALSA: seq: Fix race at closing in virmidi driver
ALSA: seq: Fix yet another races among ALSA timer accesses
ASoC: dpcm: fix the BE state on hw_free
ALSA: pcm: Fix potential deadlock in OSS emulation
ALSA: hda/realtek - Support Dell headset mode for ALC225
ALSA: hda/realtek - Support headset mode for ALC225
ALSA: hda/realtek - New codec support of ALC225
ALSA: rawmidi: Fix race at copying & updating the position
ALSA: rawmidi: Remove kernel WARNING for NULL user-space buffer check
ALSA: rawmidi: Make snd_rawmidi_transmit() race-free
ALSA: seq: Degrade the error message for too many opens
ALSA: seq: Fix incorrect sanity check at snd_seq_oss_synth_cleanup()
ALSA: dummy: Disable switching timer backend via sysfs
ALSA: compress: Disable GET_CODEC_CAPS ioctl for some architectures
ALSA: hda - disable dynamic clock gating on Broxton before reset
ALSA: Add missing dependency on CONFIG_SND_TIMER
ALSA: bebob: Use a signed return type for get_formation_index
ALSA: usb-audio: avoid freeing umidi object twice
ALSA: usb-audio: Add native DSD support for PS Audio NuWave DAC
ALSA: usb-audio: Fix OPPO HA-1 vendor ID
ALSA: usb-audio: Add quirk for Microsoft LifeCam HD-6000
ALSA: usb-audio: Fix TEAC UD-501/UD-503/NT-503 usb delay
hrtimer: Handle remaining time proper for TIME_LOW_RES
md/raid: only permit hot-add of compatible integrity profiles
media: i2c: Don't export ir-kbd-i2c module alias
parisc: Fix __ARCH_SI_PREAMBLE_SIZE
parisc: Protect huge page pte changes with spinlocks
printk: do cond_resched() between lines while outputting to consoles
tracing/stacktrace: Show entire trace if passed in function not found
tracing: Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()
PCI: Fix minimum allocation address overwrite
PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD
mtd: nand: assign reasonable default name for NAND drivers
wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)
wlcore/wl12xx: spi: fix oops on firmware load
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
ocfs2/dlm: ignore cleaning the migration mle that is inuse
ALSA: hda - Implement loopback control switch for Realtek and other codecs
block: fix bio splitting on max sectors
base/platform: Fix platform drivers with no probe callback
HID: usbhid: fix recursive deadlock
ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock
block: split bios to max possible length
NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
crypto: sun4i-ss - add missing statesize
Linux 4.4.1
arm64: kernel: fix architected PMU registers unconditional access
arm64: kernel: enforce pmuserenr_el0 initialization and restore
arm64: mm: ensure that the zero page is visible to the page table walker
arm64: Clear out any singlestep state on a ptrace detach operation
powerpc/module: Handle R_PPC64_ENTRY relocations
scripts/recordmcount.pl: support data in text section on powerpc
powerpc: Make {cmp}xchg* and their atomic_ versions fully ordered
powerpc: Make value-returning atomics fully ordered
powerpc/tm: Check for already reclaimed tasks
batman-adv: Drop immediate orig_node free function
batman-adv: Drop immediate batadv_hard_iface free function
batman-adv: Drop immediate neigh_ifinfo free function
batman-adv: Drop immediate batadv_neigh_node free function
batman-adv: Drop immediate batadv_orig_ifinfo free function
batman-adv: Avoid recursive call_rcu for batadv_nc_node
batman-adv: Avoid recursive call_rcu for batadv_bla_claim
team: Replace rcu_read_lock with a mutex in team_vlan_rx_kill_vid
net/mlx5_core: Fix trimming down IRQ number
bridge: fix lockdep addr_list_lock false positive splat
ipv6: update skb->csum when CE mark is propagated
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
bonding: Prevent IPv6 link local address on enslaved devices
net: preserve IP control block during GSO segmentation
udp: disallow UFO for sockets with SO_NO_CHECK option
net: pktgen: fix null ptr deref in skb allocation
sched,cls_flower: set key address type when present
tcp_yeah: don't set ssthresh below 2
ipv6: tcp: add rcu locking in tcp_v6_send_synack()
net: sctp: prevent writes to cookie_hmac_alg from accessing invalid memory
vxlan: fix test which detect duplicate vxlan iface
unix: properly account for FDs passed over unix sockets
xhci: refuse loading if nousb is used
usb: core: lpm: fix usb3_hardware_lpm sysfs node
USB: cp210x: add ID for ELV Marble Sound Board 1
rtlwifi: fix memory leak for USB device
ASoC: compress: Fix compress device direction check
ASoC: wm5110: Fix PGA clear when disabling DRE
ALSA: timer: Handle disconnection more safely
ALSA: hda - Flush the pending probe work at remove
ALSA: hda - Fix missing module loading with model=generic option
ALSA: hda - Fix bass pin fixup for ASUS N550JX
ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
ALSA: hrtimer: Fix stall by hrtimer_cancel()
ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix double unlink of active_list
ALSA: timer: Fix race among timer ioctls
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: timer: Harden slave timer list handling
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: seq: Fix race at timer setup and close
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
x86/mm: Improve switch_mm() barrier comments
x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
x86/boot: Double BOOT_HEAP_SIZE to 64KB
x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
KVM: x86: correctly print #AC in traces
KVM: x86: expose MSR_TSC_AUX to userspace
x86/xen: don't reset vcpu_info on a cancelled suspend
KEYS: Fix keyring ref leak in join_session_keyring()
Conflicts:
arch/arm64/kernel/perf_event.c
drivers/scsi/sd.c
sound/core/compress_offload.c
Change-Id: I9f77fe42aaae249c24cd6e170202110ab1426878
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Remove the use of PM_RUNTIME feature flag in the driver as this flag
is obsoleted on newer kernel versions. Instead use PM flag to conditionally
compile RPM callbacks.
Change-Id: I92d4b9ac15d05c6144a68ddd41f29b00aa209fd2
Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
This snapshot is taken as of msm-3.18 commit e70ad0cd (Promotion of
kernel.lnx.3.18-151201.)
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
commit 308bbc9ab838d0ace0298268c7970ba9513e2c65 upstream.
The omap-serial driver emulates RS485 delays using software timers,
but neglects to clamp the input values from the unprivileged
ioctl(TIOCSRS485). Because the software implementation busy-waits,
malicious userspace could stall the cpu for ~49 days.
Clamp the input values to < 100ms.
Fixes: 4a0ac0f55b ("OMAP: add RS485 support")
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c55d9b98335f7f6bd5f061866ff1633401f3a44 upstream.
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.
Add both Broadwell LPSS UART ports to the list of supported devices.
Signed-off-by: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dde55787b43a8f2b4021916db38d90c03a2ec64 upstream.
WCH382 2S board is a PCIe card with 2 DB9 COM ports detected as
Serial controller: Device 1c00:3253 (rev 10) (prog-if 05 [16850])
Signed-off-by: Jeremy McNicoll <jmcnicol@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f55c718c290616889c04946864a13ef30f64929 upstream.
Considering current pty code and multiple devpts instances, it's possible
to umount a devpts file system while a program still has /dev/tty opened
pointing to a previosuly closed pty pair in that instance. In the case all
ptmx and pts/N files are closed, umount can be done. If the program closes
/dev/tty after umount is done, devpts_kill_index will use now an invalid
super_block, which was already destroyed in the umount operation after
running ->kill_sb. This is another "use after free" type of issue, but now
related to the allocated super_block instance.
To avoid the problem (warning at ida_remove and potential crashes) for
this specific case, I added two functions in devpts which grabs additional
references to the super_block, which pty code now uses so it makes sure
the super block structure is still valid until pty shutdown is done.
I also moved the additional inode references to the same functions, which
also covered similar case with inode being freed before /dev/tty final
close/shutdown.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2831c89f42dcde440cfdccb9fee9f42d54bbc1ef upstream.
This change fixes a bug for a corner case where we have the the last
release from a pty master/slave coming from a previously opened /dev/tty
file. When this happens, the tty->driver_data can be stale, due to all
ptmx or pts/N files having already been closed before (and thus the inode
related to these files, which tty->driver_data points to, being already
freed/destroyed).
The fix here is to keep a reference on the opened master ptmx inode.
We maintain the inode referenced until the final pty_unix98_shutdown,
and only pass this inode to devpts_kill_index.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c17c861a357e9458001f021a7afa7aab9937439 upstream.
ioctl(TIOCGETD) retrieves the line discipline id directly from the
ldisc because the line discipline id (c_line) in termios is untrustworthy;
userspace may have set termios via ioctl(TCSETS*) without actually
changing the line discipline via ioctl(TIOCSETD).
However, directly accessing the current ldisc via tty->ldisc is
unsafe; the ldisc ptr dereferenced may be stale if the line discipline
is changing via ioctl(TIOCSETD) or hangup.
Wait for the line discipline reference (just like read() or write())
to retrieve the "current" line discipline id.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f22f6c935cda600660e623a411fe380015d28d9 upstream.
A small window exists where a tty reopen will observe the tty
just prior to imminent teardown (tty->count == 0); in this case, open()
returns EIO to userspace.
Instead, retry the open after checking for signals and yielding;
this interruptible retry loop allows teardown to commence and initialize
a new tty on retry. Never retry the BSD master pty reopen; there is no
guarantee the pty pair teardown is imminent since the slave file
descriptors may remain open indefinitely.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bfd464d3fdd5bb322f9cace4cc47f1796545cf7 upstream.
Allow a signal to interrupt the wait for a tty reopen; eg., if
the tty has starting final close and is waiting for the device to
drain.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d27a63caad3f13e96cf065d2d96828c2006be6b upstream.
Although n_tty_check_unthrottle() has a valid ldisc reference (since
the tty core gets the ldisc ref in tty_read() before calling the line
discipline read() method), it does not have a valid ldisc reference to
the "other" pty of a pty pair. Since getting an ldisc reference for
tty->link essentially open-codes tty_wakeup(), just replace with the
equivalent tty_wakeup().
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add wake_peer which is called before starting UART TX. The idea here
is to provide a mechanism where we can wakeup our peer before sending
data.
Change-Id: I42e0779b635f64ca99184b45d5b028de80197491
Signed-off-by: San Mehat <san@google.com>
Pull sparc fixes from David Miller:
1) Finally make perf stack backtraces stable on sparc, several problems
(mostly due to the context in which the user copies from the stack
are done) contributed to this.
From Rob Gardner.
2) Export ADI capability if the cpu supports it.
3) Hook up userfaultfd system call.
4) When faults happen during user copies we really have to clean up and
restore the FPU state fully. Also from Rob Gardner
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
tty/serial: Skip 'NULL' char after console break when sysrq enabled
sparc64: fix FP corruption in user copy functions
sparc64: Perf should save/restore fault info
sparc64: Ensure perf can access user stacks
sparc64: Don't set %pil in rtrap_nmi too early
sparc64: Add ADI capability to cpu capabilities
tty: serial: constify sunhv_ops structs
sparc: Hook up userfaultfd system call
When sysrq is triggered from console, serial driver for SUN hypervisor
console receives a console break and enables the sysrq. It expects a valid
sysrq char following with break. Meanwhile if driver receives 'NULL'
ASCII char then it disables sysrq and sysrq handler will never be invoked.
This fix skips calling uart sysrq handler when 'NULL' is received while
sysrq is enabled.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Acked-by: Karl Volz <karl.volz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Constifies sunhv_ops structures in tty's serial
driver since they are not modified after their
initialization.
Detected and found using Coccinelle.
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an earlycon console driver needs to acquire the uart_port.lock
spinlock for serial console output, and CONFIG_DEBUG_SPINLOCK=y:
BUG: spinlock bad magic on CPU#0, swapper/0
lock: sci_ports+0x0/0x3480, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-rc2-koelsch-g62ea5edf143bb1d0-dirty #2083
Hardware name: Generic R8A7791 (Flattened Device Tree)
[<c00173a0>] (unwind_backtrace) from [<c0013094>] (show_stack+0x10/0x14)
[<c0013094>] (show_stack) from [<c01f2338>] (dump_stack+0x70/0x8c)
[<c01f2338>] (dump_stack) from [<c00702d8>] (do_raw_spin_lock+0x20/0x190)
[<c00702d8>] (do_raw_spin_lock) from [<c0267590>] (serial_console_write+0x4c/0x130)
[<c0267590>] (serial_console_write) from [<c00734c4>] (call_console_drivers.constprop.13+0xc8/0xec)
[<c00734c4>] (call_console_drivers.constprop.13) from [<c0074ef0>] (console_unlock+0x354/0x440)
[<c0074ef0>] (console_unlock) from [<c0075bb4>] (register_console+0x2a0/0x394)
[<c0075bb4>] (register_console) from [<c06cb750>] (of_setup_earlycon+0x90/0xa4)
[<c06cb750>] (of_setup_earlycon) from [<c06cfb60>] (setup_of_earlycon+0x118/0x13c)
[<c06cfb60>] (setup_of_earlycon) from [<c06b34ac>] (do_early_param+0x64/0xb4)
[<c06b34ac>] (do_early_param) from [<c00472c0>] (parse_args+0x254/0x350)
[<c00472c0>] (parse_args) from [<c06b3860>] (parse_early_options+0x2c/0x3c)
[<c06b3860>] (parse_early_options) from [<c06b389c>] (parse_early_param+0x2c/0x40)
[<c06b389c>] (parse_early_param) from [<c06b5b08>] (setup_arch+0x520/0xaf0)
[<c06b5b08>] (setup_arch) from [<c06b3948>] (start_kernel+0x94/0x370)
[<c06b3948>] (start_kernel) from [<40008090>] (0x40008090)
Initialize the spinlock in of_setup_earlycon() and register_earlycon(),
to fix this for both DT-based and legacy earlycon. If the driver would
reinitialize the spinlock again, this is harmless, as it's allowed to
reinitialize an unlocked spinlock.
Alternatives are:
- Drivers having an early_serial_console_write() that only performs
the core functionality of serial_console_write(), without acquiring
the lock (which may be unsafe, depending on the hardware),
- Drivers initializing the spinlock in their private earlycon setup
functions.
As uart_port is owned by generic serial_core, and uart_port.lock is
initialized by uart_add_one_port() for the normal case, this can better
be handled in the earlycon core.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an issue that the "length" of scatterlist should be
set using sg_dma_len(). Otherwise, a dmaengine driver cannot work
correctly if CONFIG_NEED_SG_DMA_LENGTH=y.
Fixes: 7b39d90184 (serial: sh-sci: Fix NULL pointer dereference if HIGHMEM is enabled)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40d5e0905a ("n_tty: Fix EOF push handling") fixed EOF push
for reads. However, that approach still allows a condition mismatch
between poll() and read(), where poll() returns POLLIN but read()
blocks. This state can happen when a previous read() returned because
the user buffer was full and the next character was an EOF not at the
beginning of the line. While the next read() will properly identify
the condition and advance the read buffer tail without improperly
indicating an EOF file condition (ie., read() will not mistakenly
return 0), poll() will mistakenly indicate POLLIN.
Although a possible solution would be to peek at the input buffer
in n_tty_poll(), the better solution in this patch is to eat the
EOF during the previous read() (ie., fix the problem by eliminating
the condition).
The current canon line buffer copy limits the scan for next end-of-line
to the smaller of either,
a. the remaining user buffer size
b. completed lines in the input buffer
When the remaining user buffer size is exactly one less than the
end-of-line marked by EOF push, the EOF is not scanned nor skipped
but left for subsequent reads. In the example below, the scan
index 'eol' has stopped at the EOF because it is past the scan
limit of 5 (not because it has found the next set bit in read_flags)
user buffer [*nr = 5] _ _ _ _ _
read_flags 0 0 0 0 0 1
input buffer h e l l o [EOF]
^ ^
/ /
tail eol
result: found = 0, tail += 5, *nr += 5
Instead, allow the scan to peek ahead 1 byte (while still limiting the
scan to completed lines in the input buffer). For the example above,
result: found = 1, tail += 6, *nr += 5
Because the scan limit is now bumped +1 byte, when the scan is
completed, the tail advance and the user buffer copy limit is
re-clamped to *nr when EOF is _not_ found.
Fixes: 40d5e0905a ("n_tty: Fix EOF push handling")
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The register offset must be shifted by regshift, otherwise the
baudrate is not set. I missed the issue probably because the
divisor register was already set by the boot loader.
Fixes: 1a8d2903cb ("serial: 8250_uniphier: add UniPhier serial driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl8250_handle_irq is now used by the of_serial driver, and that fails
if it is a loadable module:
ERROR: "fsl8250_handle_irq" [drivers/tty/serial/of_serial.ko] undefined!
This exports the symbol to avoid randconfig errors.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: d43b54d269 ("serial: Enable Freescale 16550 workaround on arm")
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8250_mid uses rational_best_approximation() function, so the
driver needs to select CONFIG_RATIONAL option.
This fixes build error when CONFIG_RATIONAL is not enabled:
drivers/built-in.o: In function `mid8250_set_termios':
8250_mid.c:(.text+0x10169a): undefined reference to `rational_best_approximation'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The data to audit/record is in the 'from' buffer (ie., the input
read buffer).
Fixes: 72586c6061 ("n_tty: Fix auditing support for cannonical mode")
Cc: stable <stable@vger.kernel.org> # 4.1+
Cc: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Laura Abbott <labbott@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux Build Service Account
Trilok Soni
Girish Mahadevan
Ben Dooks
Bjorn Andersson
Charanya Venkatraman
Stephen Boyd
Stephen Boyd
Srinivas Kandagatla
Peter Hurley
Satya Durga Srinivasu Prabhala
Geert Uytterhoeven
Runmin Wang
Sebastian Frias
Naveen Kaje
David Keitel
Karthikeyan Ramasubramanian
Mika Westerberg
Jeremy McNicoll
Herton R. Krzesinski
San Mehat
Linus Torvalds
Vijay Kumar
Aya Mahfouz
Yoshihiro Shimoda
Masahiro Yamada
Arnd Bergmann
Heikki Krogerus