Commit graph

10128 commits

Author SHA1 Message Date
Uwe Kleine-König
495c7b8e64 ARM: 6348/1: s3c64xx: don't put smartq7_leds in .init.data
This fixes a section mismatch found by modpost:

	WARNING: arch/arm/mach-s3c64xx/built-in.o(.data+0x2c1c): Section mismatch in reference from the variable smartq7_led_data to the (unknown reference) .init.data:(unknown)
	The variable smartq7_led_data references
	the (unknown reference) __initdata (unknown)
	If the reference is valid then annotate the
	variable with __init* or __refdata (see linux/init.h) or name the variable:
	*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 16:36:06 +01:00
Rabin Vincent
6720db7cc5 ARM: 6354/1: nomadik-gpio: allow control of sleep mode direction and pull up
DB8500v2 allows control of direction and pull up/down configuration in
sleep mode, instead of switching the pin to input with pull up/down
enabled.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:52:19 +01:00
Rabin Vincent
7e3f7e59cc ARM: 6353/1: nomadik-gpio: add SLPM register handing for DB8500v2
The SLPM register enables/disables wakeup detection on DB8500v2.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:52:19 +01:00
Linus Walleij
e3726fcf26 ARM: 6336/1: U8500 PRCMU driver
Add an initial driver for communicating with the Power, Reset and
Clock Management Unit (PRCMU) firmware in U8500.
This initial version supports AB8500 communication only.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:46:21 +01:00
Hanumath Prasad
008f8a2f7f ARM: 6335/1: ux500: mop500: register eMMC devices
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:46:20 +01:00
Hanumath Prasad
1c833abc1f ARM: 6334/1: ux500: add DB8500 SD/MMC platform devices
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:46:19 +01:00
Linus Walleij
f946738ca8 ARM: 6331/1: ux500 cpu/SoC version macros v2
This patch adds support for checking if the digital baseband (DB)
System-on-Chip (aka "cpu) ASIC hardware version is 1.0, 1.1 or
2.0. We print the result in the bootlog, the functions are then
used for runtime decisions based on hardware version.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:46:19 +01:00
Catalin Marinas
026b5ca3b6 ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:32:13 +01:00
Phil Carmody
5333a3de3c ARM: 6341/1: unwind - optimise linked-list searches for modules
With several sections per module, and dozens of modules, the
searches down the linked list of sections would dominate the
lookup time, dwarfing any savings from the binary search
within the section.

A simple move-to-front optimisation exploits the commonality
of the code paths taken, and in simple real-world tests reduces
the number of steps in the search to barely more than 1.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:31:36 +01:00
Phil Carmody
09e56a2d07 ARM: 6340/1: module - additional unwind tables for exit/devexit sections
Without these, exit functions cannot be stack-traced, so to speak.
This implies that module unloads that perform allocations (don't
laugh) will cause noisy warnings on the console when kmemleak is
enabled, as it presumes that all code's call chains are traceable.
Similarly, BUGs and WARN_ONs will give additional console spam.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:31:35 +01:00
Phil Carmody
e5f7772eec ARM: 6339/1: module - simplify unwind table handling
The various sections are all dealt with similarly, so factor out
that common behaviour. (Incorporating Peter Huewe's fix.)

Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:31:35 +01:00
Phil Carmody
5793432628 ARM: 6338/1: module - simplify code with temporaries
Less to read.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:31:34 +01:00
Rabin Vincent
80be7a7f64 ARM: 6320/1: ftrace: enable dynamic ftrace
Dynamic ftrace for ARM has been disabled since 07c4cc1cda ("ftrace:
disable dynamic ftrace for all archs that use daemon").  Now that the
code has been updated, re-enable it.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:29:06 +01:00
Rabin Vincent
72dc43a9eb ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
Handle the different nop and call instructions for Thumb-2.  Also, we
need to adjust the recorded mcount_loc addresses because they have the
lsb set.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org> [recordmcount.pl change]
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:28:43 +01:00
Rabin Vincent
3b6c223b1b ARM: 6318/1: ftrace: fix and update dynamic ftrace
This adds mcount recording and updates dynamic ftrace for ARM to work
with the new ftrace dyamic tracing implementation.  It also adds support
for the mcount format used by newer ARM compilers.

With dynamic tracing, mcount() is implemented as a nop.  Callsites are
patched on startup with nops, and dynamically patched to call to the
ftrace_caller() routine as needed.

Acked-by: Steven Rostedt <rostedt@goodmis.org> [recordmcount.pl change]
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:27:40 +01:00
Rabin Vincent
a3ba87a614 ARM: 6316/1: ftrace: add Thumb-2 support
Fix the mcount routines to build and run on a kernel built with the
Thumb-2 instruction set by correcting the following errors using the
fixes suggested by Catalin Marinas:

 - Problem: The following assembler errors appear at the "adr r0,
   ftrace_stub" instruction:

   entry-common.S: Assembler messages:
   entry-common.S:179: Error: invalid immediate for address calculation (value = 0x00000004)

   Fix: The errors don't occur with a non-global symbol, so use one.

 - Problem: The "mov lr, pc" does not set the lsb when storing the pc in
   lr.  The called function returns with "bx lr", and the mode changes
   to ARM.

   Fix: Add a label on the return address and use "adr lr, BSYM(label)".

We don't modify the old mcount because it won't be built when using
Thumb-2.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:26:12 +01:00
Rabin Vincent
72fa62fa5d ARM: 6315/1: ftrace: add ENDPROC annotations
When building as Thumb-2, the ".type foo, %function" annotation in
ENDPROC seems to be required in order for the assembly routines to be
recognized as Thumb-2 code.  If the ENDPROC annotations are not present,
calls to these routines are generated as BLX instead of BL.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:25:27 +01:00
Rabin Vincent
09bfafac3e ARM: 6314/1: ftrace: allow build without frame pointers on ARM
With a new enough GCC, ARM function tracing can be supported without the
need for frame pointers.  This is essential for Thumb-2 support, since
frame pointers aren't available then.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02 15:24:53 +01:00
Erik Gilling
a9d8fb4d09 [ARM] tegra: Add ZRELADDR default for ARCH_TEGRA
fixes the warning:
.config:369:warning: symbol value '' invalid for ZRELADDR

and the prompt for ZRELADDR on make

Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01 14:58:53 -07:00
Russell King
b6d17c1a8e Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6 2010-09-01 10:08:50 +01:00
Russell King
1fd317076c Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2010-09-01 10:06:27 +01:00
Russell King
ca15f790e0 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 2010-09-01 10:06:21 +01:00
Mikael Pettersson
418cf646c9 ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM
The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This patch
wires them up on ARM.

The only non-trivial issue here is the u64 argument to
sys_fanotify_mark(), but it is the 3rd argument and thus
passed in r2/r3 in both kernel and user space, so it causes
no problems.

Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine.

Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01 10:06:08 +01:00
Will Deacon
25d3584797 ARM: 6330/1: perf: reword comments relating to perf_event_do_pending
This is purely a cosmetic change to the ARM perf backend because the current
comments about the relationship between NMIs, interrupt context and
perf_event_do_pending are misleading.

This patch updates the comments so that they reflect what the code
actually does (which is in line with other architectures).

Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01 10:06:08 +01:00
Uwe Kleine-König
b3282ab116 ARM: pxa: Make id const in pwm_probe()
This fixes the compiler warning:

	arch/arm/plat-pxa/pwm.c: In function 'pwm_probe':
	arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30 09:59:44 +08:00
Axel Lin
be7a6d9dd6 ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300
According to PXA3xx Processor Family Developer Manuall Vol1. section
"Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate
Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52
is CI_VSYNC.  This patch fixes the MFP defines and also corrects the
order of MFD defines.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30 09:59:43 +08:00
Eric Miao
50e77fcd79 ARM: pxa: remove __init from cpufreq_driver->init()
This is causing section mismatches when linking, as cpufreq_driver->init()
is not supposed to be in init section.

Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30 09:59:43 +08:00
Linus Torvalds
45b5bed7bc Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV310: Fix on Secondary CPU startup
  ARM: S5PV310: Bug fix on uclk1 and sclk_pwm
  ARM: S5PV310: Fix missed uart clocks
  ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll
  ARM: S5PV310: Fix on PLL setting for S5PV310
  ARM: S5PV310: Add CMU block for S5PV310 Clock
  ARM: S5PV310: Fix on typo irqs.h of S5PV310
  ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310
  ARM: S5PV310: Fix on GPIO base addresses
  ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type
  ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28 14:12:05 -07:00
Linus Torvalds
8f2a0029b8 Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  arm: tegra: VMALLOC_END should be unsigned long
  arm: tegra: fix compilation of board-harmony.c
2010-08-28 14:09:16 -07:00
Linus Torvalds
a5a8283495 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3: PM: ensure IO wakeups are properly disabled
  omap: Fix omap_4430sdp_defconfig for make oldconfig
  omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq
  omap: Fix sev instruction usage for multi-omap
  OMAP3: Fix a cpu type check problem
  omap3: id: fix 3630 rev detection
2010-08-28 14:07:38 -07:00
Linus Torvalds
2637d139fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove()
  Input: mousedev - fix regression of inverting axes
  Input: uinput - add devname alias to allow module on-demand load
  Input: hil_kbd - fix compile error
  USB: drop tty argument from usb_serial_handle_sysrq_char()
  Input: sysrq - drop tty argument form handle_sysrq()
  Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-28 13:55:31 -07:00
Changhwan Youn
766211e748 ARM: S5PV310: Fix on Secondary CPU startup
Following occurs on boot message without this patch.
    CPU1: processor failed to boot
    Brought up 1 CPUs
    SMP: Total of 1 processors activated...

This patch adds SYSRAM mapping for fixing Secondary CPU startup.
    CPU1: Booted secondary processor
    Brought up 2 CPUs
    SMP: Total of 2 processors activated...

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:29:58 +09:00
Jongpill Lee
3297c2e6d7 ARM: S5PV310: Bug fix on uclk1 and sclk_pwm
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:29:27 +09:00
Jongpill Lee
5a847b4af8 ARM: S5PV310: Fix missed uart clocks
This patch adds missed uart clocks for S5PV310/S5PC210.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:29:24 +09:00
Jongpill Lee
3ff310206d ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll
This patch adds clk_sclk_apll so that fixes on clk_mout_apll.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:06:54 +09:00
Jongpill Lee
4d235f7934 ARM: S5PV310: Fix on PLL setting for S5PV310
This patch fixes on PLL setting for S5PV310/S5PC210.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:06:54 +09:00
Kukjin Kim
c598c47d85 ARM: S5PV310: Add CMU block for S5PV310 Clock
This patch adds CMU block for S5PV310/S5PC210 clock.
(CMU: Clock Management Unit)
Of course, changed current clock addresses for it together.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:04:37 +09:00
Kukjin Kim
35fc950bd5 ARM: S5PV310: Fix on typo irqs.h of S5PV310
This patch fixes typo 'IRQ_WTD' in the irqs.h of S5PV310.
And minor update comments.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 18:04:13 +09:00
Kukjin Kim
68c1dbcb5a ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310
This patch adds default zreladdr of ARCH_S5PV310.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 15:29:11 +09:00
Kyungmin Park
4d9147053b ARM: S5PV310: Fix on GPIO base addresses
The S5PV310/S5PC210 has following three GPIO base addresses.

Part1 Base Address=0x11400000
Part2 Base Address=0x11000000
Part3 Base Address=0x03860000

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor edit of title]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27 15:29:01 +09:00
Kukjin Kim
15cae77ad8 ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type
Fix this warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:644: warning: format '%08lx' expects type
'long unsigned int', but argument 12 has type 'unsigned int'

And removes the useless parens and white space.

Reported-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
2010-08-27 15:28:38 +09:00
Rabin Vincent
2971944582 ARM: 6307/1: mmci: allow the card detect GPIO value not to be inverted
On some platforms, the GPIO value from the gpio_cd pin doesn't need to
be inverted to get it active high.  Add a cd_invert platform data
parameter and change existing platforms using GPIO for CD (only
Realview) to enable it.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-26 19:54:27 +01:00
Uwe Kleine-König
70ddd47f7d ARM: imx: fix build failure concerning otg/ulpi
The build failure was introduced by

	13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 20:50:17 -07:00
Kyungmin Park
c1eea3756a ARM: S5P: VMALLOC_END should be unsigned long
Silences following build warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long
unsigned int', but argument 12 has type 'unsigned int'

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-23 10:50:36 +09:00
Olof Johansson
42537eff86 arm: tegra: VMALLOC_END should be unsigned long
Silences following build warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long
unsigned int', but argument 12 has type 'unsigned int'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Colin Cross <ccross@google.com>
2010-08-22 12:54:23 -07:00
Olof Johansson
a68820db79 arm: tegra: fix compilation of board-harmony.c
The patch "ARM: Remove DISCONTIGMEM support" removed the node id from
the meminfo struct and the PHYS_TO_NID macro, causing compilation errors:

arch/arm/mach-tegra/board-harmony.c: In function 'tegra_harmony_fixup':
arch/arm/mach-tegra/board-harmony.c:94: error: 'struct membank' has no member named 'node'
arch/arm/mach-tegra/board-harmony.c:94: error: implicit declaration of function 'PHYS_TO_NID'
arch/arm/mach-tegra/board-harmony.c:97: error: 'struct membank' has no member named 'node'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Colin Cross <ccross@google.com>
2010-08-22 12:54:14 -07:00
Jason Wang
14f0f512ba ARM: imx: set cache line size to 64 bytes for i.MX5
The core of i.MX5 series is cortex-A8, its cache line size is 64 bytes
instead of 32 bytes. Refer to the OMAP3's selection, we choose 64
bytes for i.MX5, this can increase a little bit performance when
perform cache operations.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-21 12:22:43 +02:00
Jason Wang
7f67bff586 mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function
We can see MXC_CCM_CCGRx_MOD_OFF is defined as 0 while
MXC_CCM_CCGRx_CG_MASK is defined as 0x3 in crm_regs.h, here in the
_clk_ccgr_disable function, we want to clear the corresponding enable
bit fields to disable this clock, so we should choose MASK instead of
OFF otherwise clocks can't be disabled.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-21 12:22:43 +02:00
Jason Wang
a38b372fc2 mxc/tzic: add base address when accessing TZIC registers
When we call tzic_enable_wake function, the kernel will crash because
of access to an unmapped address. This is because two register
access operations forgot to add base address.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-08-21 12:22:43 +02:00
Kyungmin Park
944645c33e s5pc110: SDHCI-s3c can override host capabilities
Each board can override the default sdhci host capabilities.
Some board has broken features by hardwares and support 8-bit bandwidth.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20 09:34:55 -07:00