commit 816b0acf3deb6d6be5d0519b286fdd4bafade905 upstream.
If first_bad == this_sector when we get the WriteMostly disk
in read_balance(), valid disk will be returned with zero
max_sectors. It'll lead to a dead loop in make_request(), and
OOM will happen because of endless allocation of struct bio.
Since we can't get data from this disk in this case, so
continue for another disk.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5fe1b51905df7cfe4fdfd85c5fb7bc5b71a094f upstream.
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
changed current->bio_list so that it did not contain *all* of the
queued bios, but only those submitted by the currently running
make_request_fn.
There are two places which walk the list and requeue selected bios,
and others that check if the list is empty. These are no longer
correct.
So redefine current->bio_list to point to an array of two lists, which
contain all queued bios, and adjust various code to test or walk both
lists.
Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
Signed-off-by: Jens Axboe <axboe@fb.com>
[jwang: backport to 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Restore changes in device-mapper from upstream version]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
commit 9b622e2bbcf049c82e2550d35fb54ac205965f50 upstream.
md pending write counter must be incremented after bio is split,
otherwise it gets decremented too many times in end bio callback and
becomes negative.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61eb2b43b99ebdc9bc6bc83d9792257b243e7cb3 upstream.
Neil Brown pointed out a potential deadlock in raid 10 code with
bio_split/chain. The raid1 code could have the same issue, but recent
barrier rework makes it less likely to happen. The deadlock happens in
below sequence:
1. generic_make_request(bio), this will set current->bio_list
2. raid10_make_request will split bio to bio1 and bio2
3. __make_request(bio1), wait_barrer, add underlayer disk bio to
current->bio_list
4. __make_request(bio2), wait_barrer
If raise_barrier happens between 3 & 4, since wait_barrier runs at 3,
raise_barrier waits for IO completion from 3. And since raise_barrier
sets barrier, 4 waits for raise_barrier. But IO from 3 can't be
dispatched because raid10_make_request() doesn't finished yet.
The solution is to adjust the IO ordering. Quotes from Neil:
"
It is much safer to:
if (need to split) {
split = bio_split(bio, ...)
bio_chain(...)
make_request_fn(split);
generic_make_request(bio);
} else
make_request_fn(mddev, bio);
This way we first process the initial section of the bio (in 'split')
which will queue some requests to the underlying devices. These
requests will be queued in generic_make_request.
Then we queue the remainder of the bio, which will be added to the end
of the generic_make_request queue.
Then we return.
generic_make_request() will pop the lower-level device requests off the
queue and handle them first. Then it will process the remainder
of the original bio once the first section has been fully processed.
"
Note, this only happens in read path. In write path, the bio is flushed to
underlaying disks either by blk flush (from schedule) or offladed to raid1/10d.
It's queued in current->bio_list.
Cc: Coly Li <colyli@suse.de>
Suggested-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d67a5f4b5947aba4bfe9a80a2b86079c215ca755 upstream.
Commit df2cb6daa4 ("block: Avoid deadlocks with bio allocation by
stacking drivers") created a workqueue for every bio set and code
in bio_alloc_bioset() that tries to resolve some low-memory deadlocks
by redirecting bios queued on current->bio_list to the workqueue if the
system is low on memory. However other deadlocks (see below **) may
happen, without any low memory condition, because generic_make_request
is queuing bios to current->bio_list (rather than submitting them).
** the related dm-snapshot deadlock is detailed here:
https://www.redhat.com/archives/dm-devel/2016-July/msg00065.html
Fix this deadlock by redirecting any bios on current->bio_list to the
bio_set's rescue workqueue on every schedule() call. Consequently,
when the process blocks on a mutex, the bios queued on
current->bio_list are dispatched to independent workqueus and they can
complete without waiting for the mutex to be available.
The structure blk_plug contains an entry cb_list and this list can contain
arbitrary callback functions that are called when the process blocks.
To implement this fix DM (ab)uses the onstack plug's cb_list interface
to get its flush_current_bio_list() called at schedule() time.
This fixes the snapshot deadlock - if the map method blocks,
flush_current_bio_list() will be called and it redirects bios waiting
on current->bio_list to appropriate workqueues.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1267650
Depends-on: df2cb6daa4 ("block: Avoid deadlocks with bio allocation by stacking drivers")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03a9e24ef2aaa5f1f9837356aed79c860521407a upstream.
Recently I receive a bug report that on Linux v3.0 based kerenl, hot add
disk to a md linear device causes kernel crash at linear_congested(). From
the crash image analysis, I find in linear_congested(), mddev->raid_disks
contains value N, but conf->disks[] only has N-1 pointers available. Then
a NULL pointer deference crashes the kernel.
There is a race between linear_add() and linear_congested(), RCU stuffs
used in these two functions cannot avoid the race. Since Linuv v4.0
RCU code is replaced by introducing mddev_suspend(). After checking the
upstream code, it seems linear_congested() is not called in
generic_make_request() code patch, so mddev_suspend() cannot provent it
from being called. The possible race still exists.
Here I explain how the race still exists in current code. For a machine
has many CPUs, on one CPU, linear_add() is called to add a hard disk to a
md linear device; at the same time on other CPU, linear_congested() is
called to detect whether this md linear device is congested before issuing
an I/O request onto it.
Now I use a possible code execution time sequence to demo how the possible
race happens,
seq linear_add() linear_congested()
0 conf=mddev->private
1 oldconf=mddev->private
2 mddev->raid_disks++
3 for (i=0; i<mddev->raid_disks;i++)
4 bdev_get_queue(conf->disks[i].rdev->bdev)
5 mddev->private=newconf
In linear_add() mddev->raid_disks is increased in time seq 2, and on
another CPU in linear_congested() the for-loop iterates conf->disks[i] by
the increased mddev->raid_disks in time seq 3,4. But conf with one more
element (which is a pointer to struct dev_info type) to conf->disks[] is
not updated yet, accessing its structure member in time seq 4 will cause a
NULL pointer deference fault.
To fix this race, there are 2 parts of modification in the patch,
1) Add 'int raid_disks' in struct linear_conf, as a copy of
mddev->raid_disks. It is initialized in linear_conf(), always being
consistent with pointers number of 'struct dev_info disks[]'. When
iterating conf->disks[] in linear_congested(), use conf->raid_disks to
replace mddev->raid_disks in the for-loop, then NULL pointer deference
will not happen again.
2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to
free oldconf memory. Because oldconf may be referenced as mddev->private
in linear_congested(), kfree_rcu() makes sure that its memory will not
be released until no one uses it any more.
Also some code comments are added in this patch, to make this modification
to be easier understandable.
This patch can be applied for kernels since v4.0 after commit:
3be260cc18 ("md/linear: remove rcu protections in favour of
suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for
people who maintain kernels before Linux v4.0, they need to do some back
back port to this patch.
Changelog:
- V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to
replace rcu_call() in linear_add().
- v2: add RCU stuffs by suggestion from Shaohua and Neil.
- v1: initial effort.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Shaohua Li <shli@fb.com>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca763d0a53b264a650342cee206512bc92ac7050 upstream.
A rounding bug due to compiler generated temporary being 32bit was found
in remap_to_cache(). A localized cast in remap_to_cache() fixes the
corruption but this preferred fix (changing from uint32_t to sector_t)
eliminates potential for future rounding errors elsewhere.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8d7c33232e5fdfa761c3416539bc5b4acd12db5 upstream.
Current implementation employ 16bit counter of active stripes in lower
bits of bio->bi_phys_segments. If request is big enough to overflow
this counter bio will be completed and freed too early.
Fortunately this not happens in default configuration because several
other limits prevent that: stripe_cache_size * nr_disks effectively
limits count of active stripes. And small max_sectors_kb at lower
disks prevent that during normal read/write operations.
Overflow easily happens in discard if it's enabled by module parameter
"devices_handle_discard_safely" and stripe_cache_size is set big enough.
This patch limits requests size with 256Mb - 8Kb to prevent overflows.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Shaohua Li <shli@kernel.org>
Cc: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 314c25c56c1ee5026cf99c570bdfe01847927acb upstream.
In dm_sm_metadata_create() we temporarily change the dm_space_map
operations from 'ops' (whose .destroy function deallocates the
sm_metadata) to 'bootstrap_ops' (whose .destroy function doesn't).
If dm_sm_metadata_create() fails in sm_ll_new_metadata() or
sm_ll_extend(), it exits back to dm_tm_create_internal(), which calls
dm_sm_destroy() with the intention of freeing the sm_metadata, but it
doesn't (because the dm_space_map operations is still set to
'bootstrap_ops').
Fix this by setting the dm_space_map operations back to 'ops' if
dm_sm_metadata_create() fails when it is set to 'bootstrap_ops'.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 265e9098bac02bc5e36cda21fdbad34cb5b2f48d upstream.
In crypt_set_key(), if a failure occurs while replacing the old key
(e.g. tfm->setkey() fails) the key must not have DM_CRYPT_KEY_VALID flag
set. Otherwise, the crypto layer would have an invalid key that still
has DM_CRYPT_KEY_VALID flag set.
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bff7e067ee518f9ed7e1cbc63e4c9e01670d0b71 upstream.
Fix to return error code -EINVAL instead of 0, as is done elsewhere in
this function.
Fixes: e80d1c805a ("dm: do not override error code returned from dm_get_device()")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcb2ff56417362c31f6b430c3c531a84581e8721 upstream.
If a default leg has failed, any read will cause a new operational
default leg to be selected and the read is resubmitted. But until now
the read will return failure even though it was successful due to
resubmission. The reason for this is bio->bi_error was not being
cleared before resubmitting the bio.
Fix by clearing bio->bi_error before resubmission.
Fixes: 4246a0b63b ("block: add a bi_error field to struct bio")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d09960b0032174eb493c4c13be5b9c9ef36dc9a7 upstream.
dm_old_request_fn() has paths that access md->io_barrier. The party
destroying io_barrier should ensure that no future execution of
dm_old_request_fn() is possible. Move io_barrier destruction to below
blk_cleanup_queue() to ensure this and avoid a NULL pointer crash during
request-based DM device shutdown.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f659b10087daaf4ce0087c3f6aec16746be9628f upstream.
As the documentation for kthread_stop() says, "if threadfn() may call
do_exit() itself, the caller must ensure task_struct can't go away".
dm-crypt does not ensure this and therefore crashes when crypt_dtr()
calls kthread_stop(). The crash is trivially reproducible by adding a
delay before the call to kthread_stop() and just opening and closing a
dm-crypt device.
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 533 Comm: cryptsetup Not tainted 4.8.0-rc7+ #7
task: ffff88003bd0df40 task.stack: ffff8800375b4000
RIP: 0010: kthread_stop+0x52/0x300
Call Trace:
crypt_dtr+0x77/0x120
dm_table_destroy+0x6f/0x120
__dm_destroy+0x130/0x250
dm_destroy+0x13/0x20
dev_remove+0xe6/0x120
? dev_suspend+0x250/0x250
ctl_ioctl+0x1fc/0x530
? __lock_acquire+0x24f/0x1b10
dm_ctl_ioctl+0x13/0x20
do_vfs_ioctl+0x91/0x6a0
? ____fput+0xe/0x10
? entry_SYSCALL_64_fastpath+0x5/0xbd
? trace_hardirqs_on_caller+0x151/0x1e0
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1f/0xbd
This problem was introduced by bcbd94ff48 ("dm crypt: fix a possible
hang due to race condition on exit").
Looking at the description of that patch (excerpted below), it seems
like the problem it addresses can be solved by just using
set_current_state instead of __set_current_state, since we obviously
need the memory barrier.
| dm crypt: fix a possible hang due to race condition on exit
|
| A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE),
| __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop().
| It is possible that the processor reorders memory accesses so that
| kthread_should_stop() is executed before __set_current_state(). If
| such reordering happens, there is a possible race on thread
| termination: [...]
So this patch just reverts the aforementioned patch and changes the
__set_current_state(TASK_INTERRUPTIBLE) to set_current_state(...). This
fixes the crash and should also fix the potential hang.
Fixes: bcbd94ff48 ("dm crypt: fix a possible hang due to race condition on exit")
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10e06b744074824fb8ec7066bc03ecc90918f5b upstream.
If pg_init_retries is set and a request is queued against a multipath
device with all underlying block device request_queues in the "dying"
state then an infinite loop is triggered because activate_path() never
succeeds and hence never calls pg_init_done().
This change avoids that device removal triggers an infinite loop by
failing the activate_path() which causes the "dying" path to be failed.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dc23658b7aaa8b6b0609c81c8ad75e98b612801 upstream.
dm_resume() will return success (0) rather than -EINVAL if
!dm_suspended_md() upon retry within dm_resume().
Reset the error code at the start of dm_resume()'s retry loop.
Also, remove a useless assignment at the end of dm_resume().
Fixes: ffcc393641 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b785fbcf81c3533772c52b717f77293099498d3 upstream.
This avoids that new requests are queued while __dm_destroy() is in
progress.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7efb367320f56fc4d549875b6f3a6940018ef2e5 upstream.
bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries. However, the incoming bio may have more vector entries if it
was allocated by other means. For example, bcache submits bios with
more than BIO_MAX_PAGES entries. This results in bio_alloc() failure.
To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries. If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a7b0d8888c04c9746812820b6e60553cc77bbc upstream.
The md-cluster is compiled as module by default,
if it is compiled by built-in way, then we can't
make md-cluster works.
[64782.630008] md/raid1:md127: active with 2 out of 2 mirrors
[64782.630528] md-cluster module not found.
[64782.630530] md127: Could not setup cluster service (-2)
Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions")
Reported-by: Marc Smith <marc.smith@mcc.edu>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e870e948fbabf62b78e8410f04c67703e7c816b upstream.
When dm-crypt processes writes, it allocates a new bio in
crypt_alloc_buffer(). The bio is allocated from a bio set and it can
have at most BIO_MAX_PAGES vector entries, however the incoming bio can be
larger (e.g. if it was allocated by bcache). If the incoming bio is
larger, bio_alloc_bioset() fails and an error is returned.
To avoid the error, we test for a too large bio in the function
crypt_map() and use dm_accept_partial_bio() to split the bio.
dm_accept_partial_bio() trims the current bio to the desired size and
asks DM core to send another bio with the rest of the data.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5d60783df61fbb67b7596b8a0f6b4b2e05251d5 upstream.
Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to
fix a bug that the target hangs if bio_alloc() fails. The error path
does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before
invoking the error path to avoid underflow of lc->io_blocks.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91e630d9ae6de6f740ef7c8176736eb55366833e upstream.
The kthread_run() function returns either a valid task_struct or
ERR_PTR() value, check for NULL is invalid. This change fixes potential
for oops, e.g. in OOM situation.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc upstream.
v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.
Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acc9cf8c66c66b2cbbdb4a375537edee72be64df upstream.
This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:
Allocator thread:
[ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]
Registration thread:
[ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110
[ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0
[ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71
The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99f3c90d0d85708e7401a81ce3314e50bf7f2819 upstream.
When the corrupt_bio_byte feature was introduced it caused READ bios to
no longer be errored with -EIO during the down_interval. This had to do
with the complexity of needing to submit READs if the corrupt_bio_byte
feature was used.
Fix it so READ bios are properly errored with -EIO; doing so early in
flakey_map() as long as there isn't a match for the corrupt_bio_byte
feature.
Fixes: a3998799fb ("dm flakey: add corrupt_bio_byte feature")
Reported-by: Akira Hayakawa <ruby.wktk@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaf9a7361f47727b166688a9f2096854eef60fbe upstream.
Otherwise, there is potential for both DMF_SUSPENDED* and
DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is
definitely _not_ a valid state.
This fix, in conjuction with "dm rq: fix the starting and stopping of
blk-mq queues", addresses the potential for request-based DM multipath's
__multipath_map() to see !dm_noflush_suspending() during suspend.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c573de3283af007ea11c17bde1e4568d9417328 upstream.
blk_queue_split marks bio unmergeable, which makes sense for normal bio.
But if dispatching the bio to underlayer disk, the blk_queue_split
checks are invalid, hence it's possible the bio becomes mergeable.
In the reported bug, this bug causes trim against raid0 performance slash
https://bugzilla.kernel.org/show_bug.cgi?id=117051
Reported-and-tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Fixes: 6ac45aeb6bca(block: avoid to merge splitted bio)
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Reviewed-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6545b60baaf880b0cd29a5e89dbe745a06027e89 upstream.
Commit 9567366fefdd ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK(). Fix it.
Fixes: 9567366fefdd ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9567366fefddeaea4ed1d713270535d93a3b3c76 upstream.
The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().
Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.
A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code. Avoiding that now given that this needs to apply
to stable@.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes: d14fcf3dd79 ("dm cache: make sure every metadata function checks fail_io")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fafcde3ac1a418688a734365203a12483b83907a upstream.
Inside multipath_make_request(), multipath maps the incoming
bio into low level device's bio, but it is totally wrong to
copy the bio into mapped bio via '*mapped_bio = *bio'. For
example, .__bi_remaining is kept in the copy, especially if
the incoming bio is chained to via bio splitting, so .bi_end_io
can't be called for the mapped bio at all in the completing path
in this kind of situation.
This patch fixes the issue by using clone style.
Reported-and-tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 550da24f8d62fe81f3c13e3ec27602d6e44d43dc upstream.
break_stripe_batch_list breaks up a batch and copies some flags from
the batch head to the members, preserving others.
It doesn't preserve or copy STRIPE_PREREAD_ACTIVE. This is not
normally a problem as STRIPE_PREREAD_ACTIVE is cleared when a
stripe_head is added to a batch, and is not set on stripe_heads
already in a batch.
However there is no locking to ensure one thread doesn't set the flag
after it has just been cleared in another. This does occasionally happen.
md/raid5 maintains a count of the number of stripe_heads with
STRIPE_PREREAD_ACTIVE set: conf->preread_active_stripes. When
break_stripe_batch_list clears STRIPE_PREREAD_ACTIVE inadvertently
this could becomes incorrect and will never again return to zero.
md/raid5 delays the handling of some stripe_heads until
preread_active_stripes becomes zero. So when the above mention race
happens, those stripe_heads become blocked and never progress,
resulting is write to the array handing.
So: change break_stripe_batch_list to preserve STRIPE_PREREAD_ACTIVE
in the members of a batch.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=108741
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1258153
URL: http://thread.gmane.org/5649C0E9.2030204@zoner.cz
Reported-by: Martin Svec <martin.svec@zoner.cz> (and others)
Tested-by: Tom Weber <linux@junkyard.4t2.com>
Fixes: 1b956f7a8f ("md/raid5: be more selective about distributing flags across batch.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23ddba80ebe836476bb2fa1f5ef305dd1c63dc0b upstream.
This is the raid10 counterpart of the bug fixed by Nate
(raid1: include bio_end_io_list in nr_queued to prevent freeze_array hang)
Fixes: 95af587e95(md/raid10: ensure device failure recorded before write request returns)
Cc: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab2a4b806ae21b6c3e47c5ff1285ec06d505325 upstream.
Revert commit
e9e4c377e2f563(md/raid5: per hash value and exclusive wait_for_stripe)
The problem is raid5_get_active_stripe waits on
conf->wait_for_stripe[hash]. Assume hash is 0. My test release stripes
in this order:
- release all stripes with hash 0
- raid5_get_active_stripe still sleeps since active_stripes >
max_nr_stripes * 3 / 4
- release all stripes with hash other than 0. active_stripes becomes 0
- raid5_get_active_stripe still sleeps, since nobody wakes up
wait_for_stripe[0]
The system live locks. The problem is active_stripes isn't a per-hash
count. Revert the patch makes the live lock go away.
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27a353c026a879a1001e5eac4bda75b16262c44a upstream.
check_reshape() is called from raid5d thread. raid5d thread shouldn't
call mddev_suspend(), because mddev_suspend() waits for all IO finish
but IO is handled in raid5d thread, we could easily deadlock here.
This issue is introduced by
738a273 ("md/raid5: fix allocation of 'scribble' array.")
Reported-and-tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7597e69dec59b65c5525db1626b9d34afdfa678 upstream.
'max_discard_sectors' is in sectors, while 'stripe' is in bytes.
This fixes the problem where DISCARD would get disabled on some larger
RAID5 configurations (6 or more drives in my testing), while it worked
as expected with smaller configurations.
Fixes: 620125f2bf ("MD: raid5 trim support")
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccfc7bf1f09d6190ef86693ddc761d5fe3fa47cb upstream.
If raid1d is handling a mix of read and write errors, handle_read_error's
call to freeze_array can get stuck.
This can happen because, though the bio_end_io_list is initially drained,
writes can be added to it via handle_write_finished as the retry_list
is processed. These writes contribute to nr_pending but are not included
in nr_queued.
If a later entry on the retry_list triggers a call to handle_read_error,
freeze array hangs waiting for nr_pending == nr_queued+extra. The writes
on the bio_end_io_list aren't included in nr_queued so the condition will
never be satisfied.
To prevent the hang, include bio_end_io_list writes in nr_queued.
There's probably a better way to handle decrementing nr_queued, but this
seemed like the safest way to avoid breaking surrounding code.
I'm happy to supply the script I used to repro this hang.
Fixes: 55ce74d4bfe1b(md/raid1: ensure device failure recorded before write request returns.)
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8b11260a445169989d01df75d35af0f56178f95 upstream.
When bch_cache_set_alloc() fails to kzalloc the cache_set, the
asyncronous closure handling tries to dereference a cache_set that
hadn't yet been allocated inside of cache_set_flush() which is called
by __cache_set_unregister() during cleanup. This appears to happen only
during an OOM condition on bcache_register.
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07cc6ef8edc47f8b4fc1e276d31127a0a5863d4d upstream.
The bch_writeback_thread might BUG_ON in read_dirty() if
dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed
its related initialization. This patch downs the dc->writeback_lock until
after initialization is complete, thus preventing bch_writeback_thread
from proceeding prematurely.
See this thread:
http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Tested-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98dbc9c6c61698792e3a66f32f3bf066201d42d7 upstream.
An "old" (.request_fn) DM 'struct request' stores a pointer to the
associated 'struct dm_rq_target_io' in rq->special.
dm_requeue_original_request(), previously named
dm_requeue_unmapped_original_request(), called dm_unprep_request() to
reset rq->special to NULL. But rq_end_stats() would go on to hit a NULL
pointer deference because its call to tio_from_request() returned NULL.
Fix this by calling rq_end_stats() _before_ dm_unprep_request()
Signed-off-by: Bryn M. Reeves <bmr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fixes: e262f34741 ("dm stats: add support for request-based DM devices")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d14fcf3dd79c0b8a8d0ba469c44a6b04f3a1403b upstream.
Otherwise operations may be attempted that will only ever go on to crash
(since the metadata device is either missing or unreliable if 'fail_io'
is set).
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2eae9e4489b4cf83213fa3bd508b5afca3f01780 upstream.
If a transaction abort has failed then we can no longer use the metadata
device. Typically this happens if the superblock is unreadable.
This fix addresses a crash seen during metadata device failure testing.
Fixes: 8a01a6af75 ("dm thin: prefetch missing metadata pages")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6acfe68bac7e6f16dc312157b1fa6e2368985013 upstream.
Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower
than if an underlying null_blk device were used directly. One of the
reasons for this drop in performance is that blk_insert_clone_request()
was calling blk_mq_insert_request() with @async=true. This forced the
use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues
which ushered in ping-ponging between process context (fio in this case)
and kblockd's kworker to submit the cloned request. The ftrace
function_graph tracer showed:
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to
_not_ use kblockd to submit the cloned requests isn't enough to
eliminate the observed context switches.
In addition to this dm-mq specific blk-core fix, there are 2 DM core
fixes to dm-mq that (when paired with the blk-core fix) completely
eliminate the observed context switching:
1) don't blk_mq_run_hw_queues in blk-mq request completion
Motivated by desire to reduce overhead of dm-mq, punting to kblockd
just increases context switches.
In my testing against a really fast null_blk device there was no benefit
to running blk_mq_run_hw_queues() on completion (and no other blk-mq
driver does this). So hopefully this change doesn't induce the need for
yet another revert like commit 621739b00e !
2) use blk_mq_complete_request() in dm_complete_request()
blk_complete_request() doesn't offer the traditional q->mq_ops vs
.request_fn branching pattern that other historic block interfaces
do (e.g. blk_get_request). Using blk_mq_complete_request() for
blk-mq requests is important for performance. It should be noted
that, like blk_complete_request(), blk_mq_complete_request() doesn't
natively handle partial completions -- but the request-based
DM-multipath target does provide the required partial completion
support by dm.c:end_clone_bio() triggering requeueing of the request
via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE.
dm-mq fix#2 is _much_ more important than #1 for eliminating the
context switches.
Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475
After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472
With these changes multithreaded async read IOPs improved from ~950K
to ~1350K for this dm-mq stacked on null_blk test-case. The raw read
IOPs of the underlying null_blk device for the same workload is ~1950K.
Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()")
Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM")
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 385277bfb57faac44e92497104ba542cdd82d5fe upstream.
When there is an error copying a chunk dm-snapshot can incorrectly hold
associated bios indefinitely, resulting in hung IO.
The function copy_callback sets pe->error if there was error copying the
chunk, and then calls complete_exception. complete_exception calls
pending_complete on error, otherwise it calls commit_exception with
commit_callback (and commit_callback calls complete_exception).
The persistent exception store (dm-snap-persistent.c) assumes that calls
to prepare_exception and commit_exception are paired.
persistent_prepare_exception increases ps->pending_count and
persistent_commit_exception decreases it.
If there is a copy error, persistent_prepare_exception is called but
persistent_commit_exception is not. This results in the variable
ps->pending_count never returning to zero and that causes some pending
exceptions (and their associated bios) to be held forever.
Fix this by unconditionally calling commit_exception regardless of
whether the copy was successful. A new "valid" parameter is added to
commit_exception -- when the copy fails this parameter is set to zero so
that the chunk that failed to copy (and all following chunks) is not
recorded in the snapshot store. Also, remove commit_callback now that
it is merely a wrapper around pending_complete.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 512167788a6fe9481a33a3cce5f80b684631a1bb upstream.
Remove the unused struct block_op pointer that was inadvertantly
introduced, via cut-and-paste of previous brb_op() code, as part of
commit 50dd842ad.
(Cc'ing stable@ because commit 50dd842ad did)
Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
